Radar AR using JMX
Could someone, please let me know if the AR System could be monitored with Foglight. Please share the steps to set up the same.
Thank you.
Kind regards
Rajesh Kumar C
Like David, I'm not familiar with the solution AR systems using google I see this http://www.ar-sys.com/
but I'm not sure whether the correct application and it runs on.
If this forum is running on JDK 1.5.x or higher, you can try to make remote monitoring
or you can try to use the local discovery (if fglam is running on that computer).
With more information, we can be a little more specific on the right track.
I hope this helps.
Golan
Tags: Dell Tech
Similar Questions
-
Adding rule dynamically in PART using JMX
I'm looking for a way to dynamically add the rule to CQL processor. I tried using JMX, but I get under the exception:
org.springframework.beans.factory.BeanCreationException: error creating bean with name 'control' defined in the [bundleentry://282.fwk934469/META-INF/spring/eventtypetest-context.xml] URL: calling the init method failed; nested exception is java.lang.ClassCastException: com.bea.core.rmi.RemoteObject cannot be cast to javax.management.remote.mx4j_rmi. RMIConnection
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.initializeBean(AbstractAutowireCapableBeanFactory.java:1338)
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.doCreateBean(AbstractAutowireCapableBeanFactory.java:473)
to org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory$ 1.run(AbstractAutowireCapableBeanFactory.java:409)
at java.security.AccessController.doPrivileged (Native Method)
at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.createBean(AbstractAutowireCapableBeanFactory.java:380)
to org.springframework.beans.factory.support.AbstractBeanFactory$ 1.getObject(AbstractBeanFactory.java:264)
at org.springframework.beans.factory.support.DefaultSingletonBeanRegistry.getSingleton(DefaultSingletonBeanRegistry.java:222)
at org.springframework.beans.factory.support.AbstractBeanFactory.doGetBean(AbstractBeanFactory.java:261)
at org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:185)
at org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:164)
I was connecting from a bean in my application PART and follow exactly the same steps listed here:
http://docs.Oracle.com/CD/E17904_01/ doc.1111 /e14300/JMX.htm#autoId4Hello
You use PS5? If this isn't the case, could you move to it?
I think that you run into a bug when you try to do more than one action by management prior to the application being started completely. If this is the case, could you try waiting for the application to start completely and then just start adding new queries?
Thank you
Alex -
Helps to create a queue using JMX
Hello!
I use OpenMQ, and try to query all queues in a broker.
First of all, I would like to create a queue, so I can get it back later, after some research, I came to this code:
HashMap environment = new HashMap();
String [] powers = new String() {'user', 'pass'};
JMXServiceURL url = new JMXServiceURL ("service: jmx:rmi://IAI82180.tis:8686/jndi/rmi://IAI82180.tis:8686/jmxrmi"); ")
JMXConnector jmxc = JMXConnectorFactory.connect (url, environment);
MBeanServerConnection fairs = jmxc.getMBeanServerConnection ();
String brokerNameQuery = "org.apache.openmq:BrokerName = localhost, Type = Broker";
String addQueueOperationName = "addQueue";
Object [] params = {"myQueue"};
String [] sig = {"java.lang.String"};
BrokerObjName ObjectName = new ObjectName (brokerNameQuery);
MBSC. Invoke (brokerObjName, addQueueOperationName, params, GIS);
But I get the error:
Exception in thread "main" javax.management.InstanceNotFoundException: org.apache.openmq:BrokerName = localhost, Type = Broker
Also, I went to the control panel and manually added a broker, but it does not solve the problem.
I guess that the problem is in this string: org.apache.openmq:BrokerName = localhost, Type = Broker, that I adapted from the example I found.
Could someone help me, please?
Thank you
OscarThe JMS specification does not define a management API. The JMX API provided by ActiveMQ and Open queue messages are non-standard and different.
Nigel
-
effect of radar by using filters.
Hello Forum.
Im trying to achieve this effect here as seen on this picture radar described with the red line.
There seems to be a line with a kind of blur, which seems like the radar moves.
Please can you me what blur effect its done with, the case its done with a filter which is, of course, thank you.
Or try a gradient layer set to Angle.
-
Error connecting to AdminServer using JMX
Hello
I use the sub program to the list of all servers.
package suresh.poc;
import java.io.IOException;
to import java.net.MalformedURLException;
import java.util.Hashtable;
Import javax.management.MBeanServerConnection;
Import javax.management.MalformedObjectNameException;
Import javax.management.ObjectName;
Import javax.management.remote.JMXConnector;
Import javax.management.remote.JMXConnectorFactory;
Import javax.management.remote.JMXServiceURL;
to import javax.naming.Context;
public class PrintServerState {}
static MBeanServerConnection connection private;
Connector of static JMXConnector private;
Private static final service ObjectName;
Initialize the DomainRuntimeServiceMBean object name
Thus, it can be used throughout the class.
{public static
try {}
service = new ObjectName ("com.bea:Name = DomainRuntimeService, Type = weblogic.management.mbeanservers.domainruntime.DomainRuntimeServiceMBean");
} catch (MalformedObjectNameException e) {}
throw new AssertionError (e.getMessage ());
}
}
/*
* Initialize the connection to the domain TERM MBean server
*/
public static void initConnection (String hostname, String portString, String username, String password) throws IOException, MalformedURLException {}
String Protocol = 't3 ';
Integer portInteger = Integer.valueOf (portString);
int port = portInteger.intValue ();
String jndiroot = "/jndi/";
String mserver = "weblogic.management.mbeanservers.domainruntime";
ServiceURL JMXServiceURL = new JMXServiceURL (Protocol, host name, port, jndiroot + mserver);
H Hashtable = new Hashtable();
h.put (Context.SECURITY_PRINCIPAL, username);
h.put (Context.SECURITY_CREDENTIALS, password);
h.put (JMXConnectorFactory.PROTOCOL_PROVIDER_PACKAGES, "weblogic.management.remote");
Connector = JMXConnectorFactory.connect (serviceURL, h);
connection = connector.getMBeanServerConnection ();
}
/*
* Print a table of ServerRuntimeMBeans. This MBean is the root of the
* Duration MBean hierarchy and each server domain hosts its own
* instance.
*/
public static ObjectName [] getServerRuntimes() throws Exception {}
return (ObjectName []) connection.getAttribute (service, "ServerRuntimes");
}
/*
* Browse through ServerRuntimeMBeans and get the name and the State
*/
Public Sub printNameAndState() throws Exception {}
ObjectName [] serverRT = getServerRuntimes();
System.out.println ("got server runtimes");
int length = (int) serverRT.length;
for (int i = 0; i < length; i ++) {}
String name = (String) connection.getAttribute (serverRT, "Name");
Status string = (String) connection.getAttribute (serverRT [i], "State");
System.out.println ("server name:" + name + ".") Server status: "+ State);
}
}
Public Shared Sub main (String [] args) throws Exception {}
String hostname = '127.0.0.1 ';
String portString = "7001"
String username = "weblogic";
String password = "weblogic";
PrintServerState s = new PrintServerState();
initConnection (hostname, portString, username, password);
s.printNameAndState ();
Connector.Close ();
}
}
And I get the error below.
Exception in thread "main" java.io.IOException
at weblogic.management.remote.common.ClientProviderBase.makeConnection(ClientProviderBase.java:151)
at weblogic.management.remote.common.ClientProviderBase.newJMXConnector(ClientProviderBase.java:79)
at javax.management.remote.JMXConnectorFactory.newJMXConnector(JMXConnectorFactory.java:338)
at javax.management.remote.JMXConnectorFactory.connect(JMXConnectorFactory.java:247)
at suresh.poc.PrintServerState.initConnection(PrintServerState.java:42)
at suresh.poc.PrintServerState.main(PrintServerState.java:75)
Caused by: javax.naming.CommunicationException [root exception is java.rmi.UnmarshalException: do not disrupt the class weblogic.security.acl.internal.AuthenticatedUser; nested exception is:]
[java.io.StreamCorruptedException: invalid code type: 31]
at weblogic.jndi.internal.ExceptionTranslator.toNamingException(ExceptionTranslator.java:85)
at weblogic.jndi.internal.ExceptionTranslator.toNamingException(ExceptionTranslator.java:41)
at weblogic.jndi.WLInitialContextFactoryDelegate.toNamingException(WLInitialContextFactoryDelegate.java:773)
at weblogic.jndi.WLInitialContextFactoryDelegate.pushSubject(WLInitialContextFactoryDelegate.java:673)
at weblogic.jndi.WLInitialContextFactoryDelegate.newContext(WLInitialContextFactoryDelegate.java:466)
at weblogic.jndi.WLInitialContextFactoryDelegate.getInitialContext(WLInitialContextFactoryDelegate.java:373)
at weblogic.jndi.Environment.getContext(Environment.java:307)
at weblogic.jndi.Environment.getContext(Environment.java:277)
at weblogic.jndi.WLInitialContextFactory.getInitialContext(WLInitialContextFactory.java:117)
at javax.naming.spi.NamingManager.getInitialContext(NamingManager.java:667)
at javax.naming.InitialContext.getDefaultInitCtx(InitialContext.java:288)
at javax.naming.InitialContext.init(InitialContext.java:223)
to javax.naming.InitialContext. < init > (InitialContext.java:197)
at weblogic.management.remote.common.ClientProviderBase.makeConnection(ClientProviderBase.java:138)
... 5 more
Caused by: java.rmi.UnmarshalException: not to disrupt the class weblogic.security.acl.internal.AuthenticatedUser; nested exception is:
java.io.StreamCorruptedException: invalid code type: 31
at weblogic.rjvm.ResponseImpl.unmarshalReturn(ResponseImpl.java:223)
at weblogic.rmi.internal.BasicRemoteRef.invoke(BasicRemoteRef.java:224)
at weblogic.common.internal.RMIBootServiceImpl_923_WLStub.authenticate (unknown Source)
to weblogic.security.acl.internal.Security$ 1.run(Security.java:185)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:147)
at weblogic.security.acl.internal.Security.authenticate(Security.java:181)
at weblogic.jndi.WLInitialContextFactoryDelegate.authenticateRemotely(WLInitialContextFactoryDelegate.java:734)
at weblogic.jndi.WLInitialContextFactoryDelegate.pushSubject(WLInitialContextFactoryDelegate.java:667)
... 15 more
Caused by: java.io.StreamCorruptedException: invalid code type: 31
at java.io.ObjectInputStream.readObject0(ObjectInputStream.java:1356)
at java.io.ObjectInputStream.readObject(ObjectInputStream.java:351)
at weblogic.utils.io.ChunkedObjectInputStream.readObject(ChunkedObjectInputStream.java:195)
at weblogic.rjvm.MsgAbbrevInputStream.readObject(MsgAbbrevInputStream.java:565)
at weblogic.utils.io.ChunkedObjectInputStream.readObject(ChunkedObjectInputStream.java:191)
at weblogic.rmi.internal.ObjectIO.readObject(ObjectIO.java:62)
at weblogic.rjvm.ResponseImpl.unmarshalReturn(ResponseImpl.java:221)
... 23 more
Help, please.
Kind regards
SureshAny chance you use Java 6 for your client and you try to talk to WL running on Java 5? Your error signature looks exactly like this problem which has been reported in the Sun forums (see [http://forums.sun.com/thread.jspa?threadID=5195504&tstart=60]). If it comes to your scenario, this thread has a documented workaround solution.
-
Hello world!
I want to follow the oc4j 9.0.4 on windows server 2003 using JMX. But the jdk 1.3 does not support the connection of jmx.
What could I do?
Thank you!
As you note, JDK 1.3 does not JMX support, so you can use the JMX monitoring agent.
Similarly, JDK 1.3 is too old to be supported by the Java agent.
Older versions of Java JDK 1.3 are "not updated with the latest security patches and are not recommended for production use." http://www.Oracle.com/technetwork/Java/javasebusiness/downloads/Java-archive-downloads-javase13-419413.html
You can monitor older versions of OC4J using:
-Agent infrastructure for monitoring the use of process and OC4J resources on the host
-LogFilter officer monitor the application log file
-End user agents to control the specific transactions synthetically or any site web sessions passively
Kind regards
Brian Wheeldon
-
What is the difference between Foglight JavaEE and Foglight JMX monitoring?
Hello
I have a plan to monitor the 6.1.0.17 WebSphere Application Server (32 bit) and 7.0.0.5 (64-bit)
But I understand not all Foglight for JavaEE and Foglight for JMX.
Foglight for JavaEE or Foglight for JMX is able to monitor WebSphere?
What is the difference between Foglight JavaEE and Foglight JMX monitoring?
Thanks in advance
Jeans
Just to add to the excellent answers already posted.
We have 2 agents which allows you to monitor Java:
1. a JavaEE agent that runs inside the JAVA virtual machine and the information of both JMX and instrumentation.
This Agent will give you JMX information like information of JVM (use of the bunch, son etc.), of the Application and server availability information and other information of JMX/PMI (connections pools, pools of ejb, servlets, jsp, JCA and more).
Java EE & # 039agent also gives you information of the instrumentation - RFA count and response time, exceptional output and timeout information, distribution of queries (App/DB, component technology, server, application failure), object tracking, transaction flow and stransactional between servers and data sources) and ask traces (the ability to see the trees of the RFA at the method level to know where things are slow/stuck).
2 JMX agent is running outside the JVM but can run on the same computer or on a remote computer, this agent requires access active, JMX. This agent gives you information JVM, availability server/applications, as well as some data as the application server published using JMX (pools of connections, JCA, EJB, servlets, etc.). The JMX agent also gives you the ability to see a list of the mbeans, get the data they expose (javaEE agent gets only a predefined list (same list that is used as a template for the application servers in the JMX agent)).
Hope this helps
Golan
-
Tomcat tracked using Foglight 5.6.4
Hi all
We have a new requirement to monitor Tomcat applications. Searched the forums and support for the corresponding cartridge Tomcat but the Foglight sites 5.6.4 can't stand the cartridge it seems. In addition, we have an option to monitor using Java EE cartridge using the Deployment Manager agent Java. In this, we can define the configuration settings in the properties of the Agent and the monitor.
Please let me know what version of Tomcat supports of foglight and concept of using node manager and without Node manager in servers and the level of compatibility with the Java EE officer and also the requirements for the monitoring of tomcat applications.
Share links and knowledge in this regard.
Thank you best regards &,.
Guenoun.
Hello
Tomcat server is covered by the Java monitoring.
Platforms supported are in the e-docs
then choosing the right version of Foglight
Then choose the track the performance of Java applications and .NET applications
And through the link of platforms supported in the (5th line line in the image above).
It comes to the list of versions supported complete Tomcat for Foglight 5.6.4 of the java agent that makes bytecode instrumentation (direct link for tomact).
Tomcat servers
Server
Operating system
Architecture
JVM
Tomcat 7.0. [6-25]
IBM AIX 5.3, 6.1, 7.1
PowerPC
IBM 1.6
JRockit 1.6
OpenJDK 1.6, 1.71
Oracle Java SE 1.6, 1.7
Novell SUSE Linux Enterprise Server 9, 10, 11
IA32, x 86-64
Oracle Enterprise Linux 5
IA32, x 86-64
Red Hat Enterprise Linux AS/ARE/WS 4, 5, 6
IA32, x 86-64
Oracle Solaris 8, 9, 10
SPARC
Oracle Solaris 10
x 86-64
Windows XP SP1 +, Server 2003, Server 2008
IA32, x 86-64
Windows Server 2008 R2
x 86-64
Tomcat
6.0 [0-35]IBM AIX 5.3, 6.1, 7.1
PowerPC
IBM, 1.5, 1.6
JRockit 1.5, 1.6
OpenJDK1 1.6, 1.7
Oracle Java 1.5, 1.6, 1.7 SE
Novell SUSE Linux Enterprise Server 9, 10, 11
IA32, x 86-64
Oracle Enterprise Linux 5
IA32, x 86-64
Red Hat Enterprise Linux AS/ARE/WS 4, 5
IA32, x 86-64
Oracle Solaris 8, 9, 10
SPARC
Oracle Solaris 10
x 86-64
Windows XP SP1 +, Server 2003, Server 2008
IA32, x 86-64
Windows Server 2008 R2
x 86-64
Tomcat
5.5 [0-35]IBM AIX 5.3, 6.1, 7.1
PowerPC
IBM, 1.5, 1.6
JRockit 1.5, 1.6
OpenJDK1 1.6
Oracle Java SE, 1.5, 1.6
Novell SUSE Linux Enterprise Server 9, 10, 11
IA32, x 86-64
Oracle Enterprise Linux 5
IA32, x 86-64
Red Hat Enterprise Linux AS/ARE/WS 4, 5
IA32, x 86-64
Oracle Solaris 8, 9, 10
SPARC
Oracle Solaris 10
x 86-64
Windows XP SP1 +, Server 2003, Server 2008
IA32, x 86-64
Windows Server 2008 R2
x 86-64
There are more options for follow-up.
On a supported JDK, you can use an agent X (running as generic agent Java java agent) which shows the information request, traces of application and information of JVM
X-Agent application servers
Server
Operating system
Architecture
IV.
X Agent
HP - UX 11i v1
parisc
1.4.2, 1.5, 1.6 HP
IBM 1.4.2, 1.5, 1.6
JRockit 1.4.2, 1.5, 1.6
OpenJDK 1.6, 1.71
Oracle Java SE 1.4.2, 1.5, 1.6, 1.7
HP - UX 11i v2
parisc, ia64
HP - UX 11i v3
IA64
IBM AIX 5.3, 6.1, 7.1
PowerPC
Novell SUSE Linux Enterprise Server 9, 10, 11
IA32, x 86-64
Oracle Enterprise Linux 5
IA32, x 86-64
Red Hat Enterprise Linux AS/ARE/WS 4, 5
IA32, x 86-64
Oracle Solaris 8, 9, 10
SPARC
Oracle Solaris 10
x 86-64
Windows XP SP1 +, Server 2003, Server 2008
IA32, x 86-64
Windows Server 2008 R2
x 86-64
If you are using JDK 1.5.x or higher, you can use JMX agent to get data only JMX
http://eDOCS.quest.com/Foglight/564/doc/cartridge-app/JMXCartridge/index.php
As always, you can add followed with agents of the utility (webmon to monitor a web page, appmon to monitor a process, logfilter for monitor logs)ttp://en.community.dell.com/techcenter/performance-monitoring/foglight-administrators/w/admins-wiki/5646.monitoring-application-availability-using-foglight-utility-agents h
I hope this helps.
Golan Shem-Tov
-
Hi all
How can I get the weblogic user information using java?
Help, please
You can use JMX
Try this
List users and groups in Weblogic using JMX | Middleware wonders!
-
HelloCan someone explain to me please the interior design of these three approaches.
Prices even jython WLST script?
Thanks and greetings
Nitish Kumar
Hi Laurent,.
JMX: Specifications of Java to extend your application management service. The most important here are the managed Beans, or MBeans, which contains attributes and methods to configure and monitor your system. You can use JMX for a Java application to connect to your WebLogic resources and configure them or watch them.
WLST: is a JMX client. WLST is a command-line scripting environment based on Jython. You can use it to access a field, to create servers, create resources and so on.
Jython: Is a Java script interpreter. In other words, are a high level and a dynamic programming language based on Python and implemented with Java.
I recommend using WLST to perform a typical task as creating resources or to monitor your system. If you want to create a custom application to access and edit specific objects of JMX, I think that a single JMX with Java Client is the best option. Don't forget with WLST you can access a field in three ways: online, offline and Embedded (from Java).
JMX docs: http://docs.oracle.com/middleware/1212/wls/JMXCU/accesswls.htm
WLST tutorial: http://www.oracle.com/webfolder/technetwork/tutorials/obe/fmw/wls/12c/06-WLST--4474/cmdline.htm
Jython web site: The Jython Project
Kind regards
Jorge
-
Hello
I am trying to build an a CEP application that reads the statistics of stadiums. I understand how to do, it's using JMX.
I used the default installation of the server and look at the config file it's required to use JMX.
I use the following url to test the JMX:
Service: jmx:msarmi://localhost:9002/jndi/jmxconnector
and I get "the web page cannot be dispalyed.
I use CEP 11.1.1.4 and IE 9
Please see config below (it is by default CEP):
<? XML version = "1.0" encoding = "UTF-8"? >
<!-example XML file generated by XMLSpy 2007 sp2 (http://www.altova.com)->
< n1:config xsi: schemaLocation = "http://www.bea.com/ns/wlevs/config/server wlevs_server_config.xsd" xmlns:n1 = "http://www.bea.com/ns/wlevs/config/server" xmlns: xsi = "http://www.w3.org/2001/XMLSchema-instance" >
< netio >
< name > NetIO < / name >
< port > 9002 < / port >
< / netio >
< netio >
< name > sslNetIo < / name >
< name-config-bean-ssl > sslConfig < / ssl-config-bean-name >
< port > 9003 < / port >
< / netio >
<>work-Manager
< name > JettyWorkManager < / name >
< min-son-constraint > 5 < / min-son-constraint >
< 10 > max-son-constraint < / max-son-constraint >
< / job - manager >
<>Pier
< name > JettyServer < / name >
NetIO < network-io-name > < / network-io-name >
< name-manager-work > JettyWorkManager < / work-manager-name >
< zero-directory > Pier < / scratch directory >
< secure-network-io-name > sslNetIo < / secure-network-io-name >
< / Pier >
< rmi >
< name > RMI < / name >
<-http-service name > JettyServer < / http-service-name >
< / rmi >
> the jndi context.
< name > JNDI < / name >
< / jndi context >
< exported - jndi context >
< name > exportedJndi < / name >
RMI < service-rmi-name > < / rmi-service-name >
< / exported jndi context >
< jmx >
RMI < service-rmi-name > < / rmi-service-name >
< name jndi-service > JNDI < / jndi-service-name >
< / jmx >
< ssl >
< name > sslConfig < / name >
./SSL/evsidentity.jks < key-store > < / key-store >
< key-store-pass >
< password > {sales-3DES} aNsWojsPwz71UTGVS + yxaQ == < / password >
< / key-store-pass >
< key-store-alias > evsidentity < / key-store-alias >
TLS > ssl Protocol < < / ssl Protocol >
false < apply fips > < / fips apply >
< need-client-auth > false < / auth-client-need >
< / ssl >
< http-pubsub >
PubSub < name > < / name >
< path > / pubsub < / path >
< pub-sub-bean >
<-server configuration >
< name > / pubsub < / name >
< transport supported >
< types >
long query < item > < / item >
< / types >
< / supported transport >
< publish-without-to connect-enabled > true < / publish-without-to connect-enabled >
< / server configuration >
<>channels
< item >
< channel-model > / evsmonitor < / channel-model >
< / item >
< item >
< channel-model > / evsalert < / channel-model >
< / item >
< item >
< channel-model > / evsdomainchange < / channel-model >
< / item >
< / channels >
< / pub-sub-bean >
< / http-pubsub >
bdb-config <>
BDB < db-env-path > < / db-env-path >
< / bdb-config >
<-registration service >
< name > myLogService < / name >
myFileConfig < config-leader-Journal > < / config-leader-Journal >
myStdoutConfig < stdout-config > < / stdout-config >
< Logger-gravity > view < / recorder-gravity >
< logger-severity-properties >
< Entry >
< key > life cycle < / key >
< value > view < / value >
< / Entry >
< Entry >
< key > management < / key >
< value > view < / value >
< / Entry >
< Entry >
< key > CQLServer < / key >
< value > view < / value >
< / Entry >
< Entry >
< key > CQLServerTrace < / key >
< value > view < / value >
< / Entry >
< Entry >
< key > CQLProcessor < / key >
< value > view < / value >
< / Entry >
< Entry >
< key > EplProcessor < / key >
< value > view < / value >
< / Entry >
< Entry >
Stream < key > < / key >
< value > view < / value >
< / Entry >
< Entry >
Ede < key > < / key >
< value > view < / value >
< / Entry >
< Entry >
< key > Cache < / key >
< value > view < / value >
< / Entry >
< Entry >
Adapters for < key > < / key >
< value > view < / value >
< / Entry >
< Entry >
Spring of < key > < / key >
< value > view < / value >
< / Entry >
< Entry >
Channel < key > < / key >
< value > view < / value >
< / Entry >
< Entry >
< key > Recplay < / key >
< value > view < / value >
< / Entry >
< Entry >
< key > monitor < / key >
< value > view < / value >
< / Entry >
< Entry >
< key > server < / key >
< value > view < / value >
< / Entry >
< Entry >
< key > deployment < / key >
< value > view < / value >
< / Entry >
< Entry >
< key > EventTrace < / key >
< value > view < / value >
< / Entry >
< / recorder-severity-properties >
< / registration service >
< logfile >
< name > myFileConfig < / name >
< rotation-type > no < / rotation-type >
< / log file >
<>Journal-stdout
< name > myStdoutConfig < / name >
Debug < stdout-gravity > < / stdout-gravity >
< / stdout-log >
< cluster >
DefaultServer < servername > < / server name >
< / cluster >
< domain >
< name > domaine_par_defaut < / name >
< / domain >
< / n1:config >
Thank youYou cannot access JMX for a Web page, you must write a JMX client to access the information. An easy way to do this for debugging purposes is to use the jconsole, which is distributed with your JDK.
Andy
-
Hello
I'm trying to restrict operations on JMX using JMX policy editor. By mistake, I chose "All Types of MBean" and implemented a policy that restricts operations to users with the role, say, Role1. the WebLogic user had this role and now I am unable to do anything. I can not even add a new role. It says access denied. That is to say, authorization failure. Is it possible to "reset" political JMX to the default. I tried to create a new Kingdom and everything, but it worked too.
Any help is appreciated.
Thank you
VikasRename the folder LDAP
First_Domain\servers\AdminServer\data\ldap
This should bring up your server with the default roles n strategies.
-Faisal
-
How can I use the JMX monitors, if I have a custom SSL key file? Using JConsole follow these steps:
JConsole - J - Djavax .net .ssl .trustStore = trust.jks
But how to translate this in terms FMS/JMX?
Please advise - thx - pd
Heh - after some screwing around with other settings - I ended up doing the following (which works)...
- On the host target of the agent, using keytool, use the 'importkeystore' option to move the private key from the keystore trust.jks to the cacerts file in the/jre/lib/security/cacerts of
(I had 2 JRE I did both to ensure): keytool importkeystore-srckeystore sslKeyStore - destkeystore /jre/1.6.0.21/jre/lib/security/cacerts (this will prompt you for password cacerts file - changeit and your source keystore password if it needs a). - Restart the instance of FGLAM to pick up the new SSL key to use JMX SSL.
- A new JMX agent with a single installation connection string: service: jmx:rmi://xxx.xxx.com/jndi/rmi://xxx.xxx.com:8686/jmxrmi
- Once connected (YES!) and then build your server model as you wish
Thought this might help someone else uses SSL for JMX (usual safety requirement) and monitoring of the FMS
Yes, I'm happy - so sue me
- On the host target of the agent, using keytool, use the 'importkeystore' option to move the private key from the keystore trust.jks to the cacerts file in the/jre/lib/security/cacerts of
-
I need a bit of clarification of the operation of the personalized registration of the MBeans. The new PDF documentation describe how custom mbeans can be configured using a file, as well as programmatically.
I have reason to assume that TWO steps should be made to make your custom mbean is displayed in coherence mbean Server? I don't think that the documentation is very clear on this point... Stuff with factories, etc. is not very well described, either - it is if I only do xml configuration and want the bean to be instantiated automatically directly in the mbean Server?
I am also curios on when can I perform the configuration of programamtic? At any time? Immediately at startup (cannot be donu to be after cluster since that is how I get to the registry class)?
What I want to do is to record a standard MBean that represents a point of reference I am runing on a client and that (whenever its methods are called) reports some results (transactions/sec, min, max and average transaction time etc.). This MBean can obviously ONLY be instantiated on the client where the test runs but WHO want consistency "centralized MBean server" to hold a "proxy" which can be invoked to get the hands on test results. I want to do all of this using JMX to easily get all my measurements in Borlands SilkPerformer tool that is very easy to use with JMX.
My cache node is configured in this case as the mbean Server (-Dtangosol.coherence.management = all) and the client is configured for remote management (-Dtangosol.coherence.management.remote = true).
I ONLY did the recording stripped and my MBean does NOT appear when I connect JConsole for the JMX server cache nodes)... :-(
/ Magnus
Published by: MagnusE on August 31, 2009 14:19To have a custom MBean appear in the field of management of consistency the MBean Standard must be created by the application and then passed to the Registry.Register command OR configured in the custom file - mbean.xml.
The application can call this code at any time.
Sample application:The registry = CacheFactory.getCluster () .getManagement ();
Standard StandardMBean = new Standard();
String sMBeanName = «...» » "
Registry.Register (Registry.ensureGlobalName (sMBeanName), standard);Or the MBean Standard can be configured in the custom file - mbean.xml that is processed at the start of the management service. Consistency will instantiate the class and call the method Registry.register (...).
Custom - mbean.xml example:
Standard
type = Standard
true
Pu join copies of your start controls and code help to register the MBeans?
Thank you
Everett
-
VS WRTG45 DSL, intermittent disconnects
Hey,.
I moved to a place with my router v1 on an internet cable system in a place that had dsl and a v3 router, then my router sitting in its box under the bed. During the first year in the new place, we lost the connection intermitantly for up to a day. Some questions were on the side of the IAF, but according to them, most have been at our side. It is now year two and have it so bad that the ISP has given us the impression that it was the router v3, so I took out my v1 and went to work setting things up. The Cup are not as often or as bad, but he still pulls us off line long enough to start everything hard in the system. I spent some time reading here and a few things jumped on the radar as using "DHCP for cable" vs "PPPoE for dsl. I had not thought of something like that. The other thing that has caused irritation in this year, it's now three of many connected wireless devices is no longer connect. Is it possible that I am overloading the router? We have still two routers and I wonder what would happen if I hard chained the two used for game systems, one for computers and made sure to put them both on different channels. It would be a good thing for the installer because I did not yet. Finally, when I make enough to start to make a greater dent in debts (other purpose for the move), I plan on management of the cable/internet Bill and put the House on a MUCH more pleasant connection of 5 / 6 Mbps.
I've noticed that a lot of answers here tend to include:
(1) hard reset everything.
(2) firmware update;
(3) etc.
Here's what's household:
1. computer desktop PC, ethernet to the router connection
1 Apple G4 Desktop, initially connected to the router via adapter B wireless internal factory, but does not now connect
1 HP Laptop connected wireless via adapter internal factory b
2-HP laptops connected via internal G adapters wireless factory
1 - Wii connected wireless via adapter factory internal b (we actually had two for nearly a year works well and will in the future)
1 - PS3 connected wireless G adapter (?) internal factory, almost always tells me VIH3, but I do not play online games, so it doesn't affect me
1 - PSP 1001 (the original system), worked fine until the beginning of the year, but now only connects to the PS3 via remote play
1 - PSP 1001 (second year system), worked fine until the beginning of the year, but now only connects to the PS3 via remote play
The ISP is Embarq, connection speed is 1.5Mbs down, 386Kps
Both routers have been updated to Firmware version 4.21.1 (06/11/06).
Since I control the router, I have the following custom parameters:
-----------
SETUP
-----------
Name of the router not even as SSID
DHCP (limited to 50 users)
MTU: 1500 (to keep AOL to be a punk)
Local IP address changed
Default subnet
Set as gateway
-------------
Wireless
-------------
mixed mode
Chanel, 11
Custom SSID
Hidden SSID
WEP
1 key
128-bit
Active wireless mac filter
Permit with all devices Mac address triple checked
All of the advanced settings are such that they were post factory reset except SecureEasySetup, which is disabled
-------------
Security
-------------
Firewall is enabled
Block Internet audited anon requests
Filter IDENT verified
VPN passthroughs all permits (think it's default)
-----------------------------
Access restrictions
-----------------------------
None selected
-----------------------
Apps & Gaming
-----------------------
No employee
---------------------
Administration
---------------------
Custom router password
Verified Web enabled by HTTP/HTTPS access
RR access for people with reduced mobility
UPnP disabled
EDIT:
If it came down to two routers actually dying (they are two years old, so it is possible), then what would be a good replacement? The replacement would be bought from Bestbuy so please use this site as a reference for the recommendations.
Well, now your connection problems are not related to your ISP, and it has nothing to do with this... Yes, the router is able to manage two devices, but I recommend you not to have more than 8 to 10 devices connected at any given time else they will all fight for a bandwidth...
Your router is probably very old, and you need to update the Firmware on the Linksys router...
Download the Firmware from here
Follow these steps to upgrade the firmware of the device: -.
Open a page in Internet Explorer browser on a computer hard wired to the router...
In the address bar type - 192.168.1.1... Leave name empty username & password admin lowercase usage...
Click the 'Administration' tab - then click on the 'Upgrade Firmware' under the tab-here, click on 'Browse' and navigate the .bin firmware file and click on "Upgrade"...
Wait a few seconds until it shows that "the update is successful," after the upgrade of the firmware, click on "Reboot" and you will be returned to the same page OR it will say 'cannot display the Page.Now reset your router:
Press and hold the button of reset for 30 seconds... Release the reset button... Unplug the power cable from your router, wait 30 seconds and reconnect the power cable... Now re - configure your router...
Maybe you are looking for
-
I want to cancel the search options, I chose the last update
I just upgraded to the latest Firefox. In the process, there are a few options for the search engine. I clicked on something that, when I start typing a word or phrase in the window, a drop down menu appears under the window with suggestions. It make
-
I have now a whole new desktop 700-230qe HP Envy (after about a month in the loop of the HP Technical Support). But again, I have problems. I took late delivery December 23, 2013. After giving him enough time to become the temperature of the room,
-
How can I download a cd on my iMac
You try to download a cd that has a speaker recorded on this issue on my iMac. Can someone explain how to perform this task?
-
Background is now white screen "Active Desktop Recovery"
original title: white screen "Active Desktop Recovery". My screen went WHITE with big letters proclaiming "Active desktop recovery." All my icons are still there and work very well. But when I try to click on restore Active Desktop button, not
-
Copied spam my address book so that I wasn't using email I use Windows XP and Outlook Express 6. Recently, while I was on the Net, but not by e-mail, spam has been received and sent himself to a lot of people in my address book under my own name and