Error connecting to AdminServer using JMX

Similar Questions

• Error: "it is not possible to disable the connection at this time. "This connection may be using one or more protocols that don't support Plug-and-play, or it may have been initiated by another user or the system account.

  Original title: unable to disable my lan connection

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • I turn off my connection to the local network, it is showing message.

    It is not possible to disable the connection at this time. This connection may be using one or more protocols that don't support Plug-and-play, or it may have been initiated by another user or the system account.

    Please answer soon

    You have problems with programs

  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hi MVTDA,

  You can try the following methods and check to see if it helps:

  Method 1:

  a. Click Start and select run, type cmd and click OK.

  b. type net stop cryptsvc and press ENTER.

  c. type ren %systemroot%\System32\Catroot2 oldcatroot2, and then press the Enter key.

  d. restart the computer.

  e. open new command prompt and Type net start cryptsvc, and press ENTER.

  Method 2:

  If the same problem persists then you can try to uninstall the network drivers and check.

  a. click the Start button. Select run, type devmgmt.msc and press OK.

  b. Select the network card and right click on it.

  c. now, select Properties.

  d. in the Properties window, on the driver tab, click Uninstall.

  e. After you have uninstalled the drivers, restart the computer.

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Error 907: This connection cannot be used with the VZAccess Manager

  original title: error message appear on my screen

  I get this error message appear on my screen every two seconds:
  "This connection cannot be used with the VZAccess Manager.

  Error 907 "

  Hello

  Disable/remove your Verizon Wireless software or contact Verizon for help with this error. Posts like this occur generally when third-party utilities are used to manage connections and issues must be resolved by the Distributor, because they are often specific to that software.

  Verizon support suggest that you go in the Options Internet/Control Panel and on the Connections tab, check the option "never establish a connection" is selected.

  Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

• Error connecting to SQL Server Express using jTDS

  Hi all! It's my first time using JDBC, and I followed some examples online to establish a test to my internal DB SQL Server Express connection. Here's the Basic code that I use (with security identification information redacted, of course):
  

  public static Connection getConnection() throws Exception {
      Connection conn = null;
          
      try {
          Class.forName("net.sourceforge.jtds.jdbc.Driver");
          conn = DriverManager.getConnection("jdbc:jtds:sqlserver://WINSERVER/database", "username", "password");
      }
      catch(SQLException e) {
          throw new Exception("Error connecting to database: " + e.getMessage());
      }
      catch(ClassNotFoundException e) {
          throw new Exception(e.getMessage());
      }
  
      System.out.println("Connected to database");
      return conn;
    }

  I get this error after 20 seconds: "network error IOException: Connection timed out: connect. I understand this is usually caused by a bad port, username or password, but I can connect using the exact same credentials via SQL Management Studio Express. I tried to insert port number: 1433 after the name of the server and the name of the comic, but no joy. Can someone tell me what is the 'official' syntax, or how I would go about solving this problem? Thanks in advance.
  
  Zach

  I get this error after 20 seconds: "network error IOException: Connection timed out: connect. I understand that this is usually caused by a bad port, user name or password.

  Fairly certain that most of the last part of this is incorrect since your instance information.

  If you connect to a server using what anyone, even remotely, as a true lan so if the server is not listening you will get an immediate connection error - saying something to the topic "connection refused." And if your creds user do not match you will get a different error.

  A timeout after 20 seconds means that the network request is not being served at all, by the other other end.

  And that suggests a firewall problem.

  A simple test is the following
  -Log in as the same user that the application is running as. If you are working on the app, it's you. Is there a sort of JEE or service/cron, then it is very likely that you.
  -Open a console window.
  -Use telnet to connect using EXACTLY the same hostname and port that you expect. An example

  Telnet 1433 WINSERVER

  If telnet is successful it will give you a white screen (or something similar). Failure will give an error.

  The above process verifies that your box and the credentials of the user of the process (no connection) can successfully access the db box. Until it works your java code is not.

  Common default for SQL Server ports 1433 and 1434. It can be configured to use anything else.

• Windows 7 of fingerprints of connection problem, error ' year error occurred preventing the use of your information for fingerprint identification.

  Original title: wndows 7 fingerprint logon

  I like to use fingerprints for better security authentication when logging a session Windows or unlock. I can create a long, highly secure password and do not have to type it every time I have lock Windows. BUT...

  A week or two ago, the sensors of validity fingerprint reader on my HP Pavilion dv7 stopped working. I reinstalled the latest driver from HP support device, and everything worked fine for a day or two. Now the sensor still works, but Windows (7, home edition, SP1) gives me the message "year error occurred preventing the use of your fingerprint credentials." The only thing that has changed, I know, is the latest Windows updates.

  Can anyone help? Thank you!

  Hi Frank,.

  Thanks for the reply.

  I suggest you to refer to the article and check if it helps.

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?objectID=c03061709

  If the problem persists, I suggest you send the request in Support HP for assistance.

  http://h30434.www3.HP.com/

  Hope this information helps. If you need more assistance or information on this question, reply to this post. I'll be happy to help you.

• Adding rule dynamically in PART using JMX

  I'm looking for a way to dynamically add the rule to CQL processor. I tried using JMX, but I get under the exception:
  
  org.springframework.beans.factory.BeanCreationException: error creating bean with name 'control' defined in the [bundleentry://282.fwk934469/META-INF/spring/eventtypetest-context.xml] URL: calling the init method failed; nested exception is java.lang.ClassCastException: com.bea.core.rmi.RemoteObject cannot be cast to javax.management.remote.mx4j_rmi. RMIConnection
  at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.initializeBean(AbstractAutowireCapableBeanFactory.java:1338)
  at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.doCreateBean(AbstractAutowireCapableBeanFactory.java:473)
  to org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory$ 1.run(AbstractAutowireCapableBeanFactory.java:409)
  at java.security.AccessController.doPrivileged (Native Method)
  at org.springframework.beans.factory.support.AbstractAutowireCapableBeanFactory.createBean(AbstractAutowireCapableBeanFactory.java:380)
  to org.springframework.beans.factory.support.AbstractBeanFactory$ 1.getObject(AbstractBeanFactory.java:264)
  at org.springframework.beans.factory.support.DefaultSingletonBeanRegistry.getSingleton(DefaultSingletonBeanRegistry.java:222)
  at org.springframework.beans.factory.support.AbstractBeanFactory.doGetBean(AbstractBeanFactory.java:261)
  at org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:185)
  at org.springframework.beans.factory.support.AbstractBeanFactory.getBean(AbstractBeanFactory.java:164)
  
  
  I was connecting from a bean in my application PART and follow exactly the same steps listed here:
  
  http://docs.Oracle.com/CD/E17904_01/ doc.1111 /e14300/JMX.htm#autoId4

  Hello

  You use PS5? If this isn't the case, could you move to it?

  I think that you run into a bug when you try to do more than one action by management prior to the application being started completely. If this is the case, could you try waiting for the application to start completely and then just start adding new queries?

  Thank you
  Alex

• "There was an error connecting to server Apple ID" not reliable CRL issue

  I started getting errors connecting to my Apple account on iTunes/App Store / iBooks etc., I noticed today.

  In an attempt to connect, it would return the message "There was an error connecting to server Apple ID"

  

  This debugging with Wireshark, I noticed that iTunes has been disconnected as soon as he saw the server SSL certificate.

  I opened the url field that he was using (https://gsa.apple.com) in Safari to see if reported certificate issues, and he confirmed that the intermediate certificate, although valid, could not be verified on LCR this is because he believes http://crl.apple.com/root.crl is unreliable CRL.

  

  Other computers, OSX, I checked are used the same certificate and validate the certificate successfully.

  I tried to set the certificate to always trust, but it has no effect.

  I changed Keychain Access-> Preferences-> Certificates-> certificate revocation list (CRL) of "Best tent", which seems to fix the problem, but I'm not keen on this change, because it could weaken the security of my computer compared to "demand if the certificate shows."

  Is it possible to restore the confidence of OSX CRL for this problem?

  In fact, I found just Keychain Access from another computer-> Preferences-> Certificates-> CRL (CRL) list is set to "Best tent", and causes 'Require if the certificate shows' the same question, so I guess it's a problem with the server Apple ID certificates themselves.

  I think I put the CRL settings to "Demand if the certificate indicates" some time to try to improve security. At one point, until recently, the https://gsa.apple.com worked with these settings so perhaps they changed the intermediate certificate, which presents the problem of CRL unreliable. It is http://crl.apple.com/root.crl and not https seems suspicious and could be the source of the problem untrustedness.

• verification failed - there was an error connecting to server Apple ID.

  Just upgraded to 10.11.4. Get this error when trying to login to icloud

  Verification failed

  There was an error connecting to server Apple ID.

  I can sign in here with my id, I can sign in icloud via my web browser to my id.

  What I can't do is connect from my imac (model 2015)

  Where should I go form here?

  I have exactly the same problem and I can check that if I create a new user on my MBP (current model of 15 "), I am able to use my Icloud account once again, but not under my main user. Thus, each suggestion found in the forums here:

  • Step 2 review the deactivation
  • Config of Flushing DNS or try another DNS server
  • Uninstalling an Antivirus snake oil product, I do not use

  did not help at all. But there must be something with my user account, the system itself seems to be fine as a new user account works with the same icloud account.

  This can happen now reasons:

  • I went to use the family option one or two months previously - unplausible that this has something to do with it

  Console output for two seconds after clicking on login to icloud prefs: line 2 + y has at least 20 times with different Classes but the same error:

  02.04.16 10:14:57, 409 akd [311]: NSURLSession/NSURLConnection HTTP load failed (kCFStreamErrorDomainSSL,-9807)

  02.04.16 10:14:58, com.apple.preferences.icloud.remoteservice [984 947]: CGContextSetCompositeOperation: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

  02.04.16 10:14:58, com.apple.preferences.icloud.remoteservice [984 947]: CGContextClipToRect: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

  02.04.16 10:14:58, com.apple.preferences.icloud.remoteservice [984 947]: it has no sense to draw an image when [NSGraphicsContext currentContext] is zero.  It is a programming error. Break on Sub _NSWarnForDrawingImageWithNoCurrentContext() to debug.  This will be recorded only once.  This may change in the future.

  Next steps for me will be

  • hoping someone here has an idea, so I don't have to wast hours for this
  • try to restore a backup time new machine to a new user account (would be less work) - but this option I think that will lead to problems again. I'll let you know if it is a possible way to solve the problem.
  • From a user account from scratch and selectively import settings - there is no alternative option that takes time. Usually, this is not necessary and one of the reasons why I use a mac - only not to reinstall Windows every 3 months...

• Error connecting to server Apple ID, Kaspersky not related.

  I can not connect to App Store, iTunes, iBooks or iCloud on my MacBook Pro running El Capitan.

  Each of them returns the following error.

  Error connecting to server Apple ID

  All other threads that this problem seems to be related to Kaspersky. I'm running Kaspersky.

  I have no problem with it on my other connection of devices to services that use the Apple ID server

  Problem persists, once restarted, on different networks.

   > Preferences system... > iCloud

  disconnect from iCloud, reconnect

  If this does not work

  you run any AV? Keeper? Clean my Mac? Little Snitch? etc?

  If so remove it from your system.

• Cannot connect Windows Marketplace error connection to the service.

  Original title: Cannot connect to Windows Marketplace

  When I try to connect, I get the following message:

  Error connecting to the service.

  There was a problem connecting to the Games for Windows - LIVE service. Click Retry to try connecting, or click on troubleshoot to attempt to diagnose and fix the problem.

  If you continue to have problems to connect, you may need to contact your ISP for assistance.

  I am able to use all internet services.

  Hi Torrey,

  I suggest posting your question in the games for Windows Live Marketplace forum located here:
  http://forums.Xbox.com/GFW/technical_support/marketplace/f/271.aspx

• Problems with Easy Transfer - trying to connect two computers using a USB link adapter

  I am trying to connect two computers using a USB link adapter, a computer running Windows XP under Vista, I installed the "Easy Transfer" software provided with the adapter link on the computer running XP without problem. I am able to transfer files from the computer to Vista operating, but cannot transfer the XP machine - select 'Advanced Options' to check what files can be transferred I receive the error "an error of analysis of the data on your system, windows Easy Transfer will be closed. Any ideas what I can do, any help would be greatly appreciated.

  http://support.Microsoft.com/kb/928634

  How to use Windows Easy Transfer to migrate files and settings from one Windows computer to another Windows Vista-based computer

  Above is the recommended way to do it.

  See you soon.

  Mick Murphy - Microsoft partner

• Cannot connect to PayPal using the overdraft facility

  Whenever I try to pay for something (online shopping) by using the PayPal cheque made on another Web site, it will not open a session. I enter my email address and password and just get an error message saying wrong password or e-mail address, even though I know that both are correct. I can connect to PayPal using the facility successfully using Internet Explorer without any problem. I can also connect to PayPal successfully if I go on its website (www.paypal.com.au) in Firefox.

  I tried to clear the cache and cookies associated with Pay Pal, but that did not help at all.

  This problem occurred for months and is quite frustrating.

  I'm using Firefox 48.0.2 (current version). All my extensions and plug-ins are up-to-date. Using Windows 7.

  Update: the problem is probably caused by an extension/add on. I don't know which yet. I can only test it when I buy something, where the reason why it takes me a while to understand.

  Next time I buy something online, I'll test on all extensions / add ons until I find the one who is the cause of the problem. Once I figure out I'll post an answer here.

  Thanks for your help :)

• Error: "connection attempt timed out, please check the connectivity of the internet" when trying to connect to Cisco AnyConnect 2.5 on Windows 7 x 64 computer with modem usb wireless HSIA.

  Original title: issue with Cisco AnyConnect 2.5 on win 7 x 64 when connecting to the internet using wireless HSIA usb modem.

  I have win 7 x 64 enterprize edition on my laptop.

  I have problems with Cisco anyconnect VPN client. When I'm on my corporate network it works fine.

  But when I connect to internet using HSIA modem usb wireless home form, client AnyConnect VPN will not connect. The error I get is "connection attempt has expired, please check internet connectivity.

  Please help me to solve this problem as soon as possible.

  Hi Manish,

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet forums for assistance.

  I also recommend that you contact the VPN support to help:

  https://supportforums.Cisco.com/community/NetPro/security/VPN

• Error connecting to the Terminal for blackBerry Smartphones

  Hello

  I have a BB 8100, Desktop manager 4.6.

  The synchronization work properly 3-4 weeks ago.

  Today, when I tried to sync, I got this error message:

  0 x 80040fb3

  I tried debug it using the procedure of changing family name, first name, etc... without success

  I tried several times to synchronize again but without success.

  Now, the situation is even worse!

  New message when I connect my BB to my computer. When I run the Desktop Manager, I have the following error:

  "Error connecting to the Terminal. Make sure that your device is connected properly, and then try again.

  I can't not try to synchronize!

  It is very strange, it's never happened before.

  However, Desktop Manager recognize my BB, I can read on the button to the left of the screen: Terminal connected (Pin code) recognized xxxxxx.

  HELLLLP!

  Thank you

  You know what?

  I just read another post suggested.

  They simply offered to take off from the Blackberry battery and put it again.

  Then I tried to sync and IT WORKED! I can't believe! I tried a lot of complicated stuff!

  1 month for this problem! (with this simple solution!)

  Hope that now, everything will be ok!

  Concerning

• WMP has encountered an error while fire-"you met an error message when you use Windows Media Player".

  Original title: WMP has encountered an error when burning.  Check that the burner is connected properly and that the disc is clean and not damaged.

  I'm getting the above error message.  I tried at least 4 different drives and they are not the first discs I used this pack. also, I burned 30 + drives prior to receiving this message. When I click on the button "help", he says "you have encountered an error message when you use Windows Media Player.  Additional information is not currently available for this error. »

  Hello

  Have you made changes on the computer before this problem?

  I suggest you try these methods and check the status of the issue.

  Method 1:

  Keep the computer in a clean boot and check the status of the issue. If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem. Continue with the remaining steps to pin-point on the third party service. After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: Please go up to step 7 of the Kb to maintain the computer to a normal startup after you fix the problem

  Method 2:

  Open the troubleshooter in Windows Media Player settings, run and check the status of the issue.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter