Radio button selected color!

Similar Questions

• Radio button selections does not save

  I'm creating a form of performance review. I have a section where employees need to rate themselves on a scale of 1 to 5. (1 = low, 2 = good, 3 = meets expectations, 4 = exceeds expectations, 5 = outstanding) I radio for each option buttons so that they are allowed to select a. However, when I go in, as the employee to complete the form and select the radio field I want, the selection does not record.

  Is there a way to make sure the radio button selections are saved?

  Or is there a better option?

  Hi kellyr19545348,

  Please save the PDF under the drive extended to allow other users to save the options they are checking.

  Open a PDF in Acrobat

  Go to file > save as other > Reader Extended PDF > allow more tools

  Thank you

  Abhishek

• Radio button selected user jumps to the text field

  Hello

  Is there a way to blow up a user of a radio button selected in a text field.  For example...

  1. the user will have two options of the radio button.  One option is YES and one option is no.

  2. the user must choose Yes or no (must)

  3. If the user selects YES (radio button), I want the shape of jump them to a text field to fill out additional information.

  I was able to do this with a box, but not the radio button.

  I did research online and via the forums but have not yet found a solution.

  Thanks much for any direction or resources!

  OK, with a checkbox or a radio button, you can use the mouse event to the top, but check the value is different. For the Yes option button where the value of the key (aka export value) is set to 'Yes', you would do something like:

  Script mouse upward to a radio button

  If (event.target.value = 'Yes') {}

  getField("text1").setFocus ();

  }

  Do the same for the box but use the corresponding export value.

• Prevent Question 2 Radio button selection until Question 1 Radio button selection

  I have a script (Javascript) messagebox to appear if the user tries to make a radio button selection to question 2, when they do not have a selection to question 1. However, the message box does not prevent the selection. the radio button is selected after the messagebox goes. How to prevent this? I tried to focus on the set of question 1 of option buttons, but it does not work.

  You could define question 2 in read-only or protected using 'access', until answered question 1.

• Change the background fill color based on Radio button selections

  Hello

  I am very new script in LC, so I hit a wall on my last form. I am creating a form with a scale of 'leikert-like', however one of the stipulations (from my boss) is in this context of buttons are to be filled based radio which button is selected.

  For example, Question 1 has 4 radio buttons to choose: poor, fair, good, great. If the person completing the form selects poor, I wish the poor to fill background color. If someone chooses right, I would like to than this background color to be filled, as well as the background of the poor. Good selection would fill the colors of good, fair and poor; and selecting the big would fill the four colors.

  Someone has ideas of how / if possible? In my first tests, I got the button itself to change the colors, but not the background fill (which can be changed manually on the border palette).

  Any ideas would be much appreciated. Thank you!

  Aaron

  Here is the code that you can use in the event of modification of the ExclusionGroup (title default RadioButtonList) object. It is the parent of each individual option button object.

  for (var i=0;i
  This also assumes that the value of each option button is sequentially numbered from 1 to however many boxes option you have.
  Now, here's the thing. I'm assuming that each radio button has a different color. You might code for the colors yourself in JavaScript, but I manually chose the colors through UI Designers. Once all the colors of radio buttons have been defined, select a radio button and go see > XML Source. Where we see the element, add the presence of the attribute = "hidden". Do this for each option button. Here's what I mean:
  
                    
                    
                       
                        
                          
                       
                    
                    
  
  Kyle
  		   

• still trying to make more visible radio button selections

  11.1.1.4 forms (us better not know because it is not certified for 2012r2 which is the machine that we could put this on.)  We expect...)

  in when-radio-changed before

  OK after having corrected a mistake big it's the current code:

  It works to set a different color when running a label radio! But there is a problem. I can't seem to

  unplugged the color. When the user selects another radio button colors should change course.

  For some reason any, as I get to the effect that they cannot be changed again. Any ideas?

  Does anyone know how to specify < unspecified > as a color? I tried many things and no

  work.

  declare

  currfield varchar2 (64): =: system.trigger_field;

  Val varchar2 (10): = 0;

  unpickedcolor varchar2 (20): = "r50g75b50";

  pickedcolor varchar2 (20): = "r100g100b100";

  Start

  set_radio_button_property (currfield, 'CONCENTRATE0', BACKGROUND_COLOR, unpickedcolor);

  set_radio_button_property (currfield, 'CONCENTRATE1', BACKGROUND_COLOR, unpickedcolor);

  set_radio_button_property (currfield, 'CONCENTRATE2', BACKGROUND_COLOR, unpickedcolor);

  set_radio_button_property (currfield, 'CONCENTRATE3', BACKGROUND_COLOR, unpickedcolor);

  Val: = trim (name_in (currfield));

  If val = '0' then

  set_radio_button_property (currfield, 'CONCENTRATE0', BACKGROUND_COLOR, pickedcolor);

  elsif val = "1" then

  set_radio_button_property (currfield, 'CONCENTRATE1', BACKGROUND_COLOR, pickedcolor);

  elsif val = "2" then

  set_radio_button_property (currfield, 'CONCENTRATE2', BACKGROUND_COLOR, pickedcolor);

  elsif val = "3" then

  set_radio_button_property (currfield, 'CONCENTRATE3', BACKGROUND_COLOR, pickedcolor);

  end if;

  synchronize;

  end;

  I got it! Many hours trying things, doing really, really, really stupid mistakes, etc. And the answer is below.

  NOTE that it is impossible to change the BACKGROUND_COLOR of the option button, because what happens is the color change _sticks_. (11.1.1.4) if the user has chosen an option button and then selects another so you have two radio buttons that have the selected color and so on. But it happens with VISUAL_ATTRIBUTE is the way to go. Here, I got a Visual attribute (which replaces the background_color) and the font size and the font defined for the radio group and that does not cause a problem. All the radio button properties have the default value and .

  It comes to relax when-radio-changed before status.  CURRENT and SELECTED are defined VISUAL_ATTRIBUTES.

  Now, if only there were an easier way of coding this because having a zillion radio groups this is going to be one heck of a

  a lot of work duty code using hard-coded radio_button_names.

  declare

  currfield varchar2 (64): =: system.trigger_field;

  Val varchar2 (10): = 0;

  Start

  Val: = trim (name_in (currfield));

  set_radio_button_property (currfield, 'CONCENTRATE0', VISUAL_ATTRIBUTE, 'CURRENT');

  set_radio_button_property (currfield, 'CONCENTRATE1', VISUAL_ATTRIBUTE, 'CURRENT');

  set_radio_button_property (currfield, 'CONCENTRATE2', VISUAL_ATTRIBUTE, 'CURRENT');

  set_radio_button_property (currfield, 'CONCENTRATE3', VISUAL_ATTRIBUTE, 'CURRENT');

  If val = '0' then

  set_radio_button_property (currfield, 'CONCENTRATE0', VISUAL_ATTRIBUTE, 'SELECTED');

  elsif val = "1" then

  set_radio_button_property (currfield, 'CONCENTRATE1', VISUAL_ATTRIBUTE, 'SELECTED');

  elsif val = "2" then

  set_radio_button_property (currfield, 'CONCENTRATE2', VISUAL_ATTRIBUTE, 'SELECTED');

  elsif val = "3" then

  set_radio_button_property (currfield, 'CONCENTRATE3', VISUAL_ATTRIBUTE, 'SELECTED');

  end if;

  synchronize;

  end;

• Adobe Java Script to change the field of reading to write based on radio button selection

  I created a form the question asked is "Do we have a credit limit?" the user can select a Yes or not by using a radio button.  If the user selects Yes we do not have a credit limit that I want the text field "CreditLimitAmount" to change the read only entry.

  Here is my code, but it does not work, someone would be able to see what I'm doing wrong?

  GetField ("CLYes"). Value
  If {(event.target.value==="Off)"}
  f.ReadOnly = false;
  f.fillColor = color.white;

  } else {}

  f.ReadOnly = true;
  f.FillColor = Color.Gray;
  }

  You have it backwards. Use this code as your radio buttons script two MouseUp and remove the code that you have applied to the text field:

  var f = this.getField("CreditLimitAmount");
  if (event.target.value=="CLYes") {
      f.readonly = false;
      f.fillColor = color.white;
  } else {
      f.readonly = true;
      f.fillColor = color.gray;
  }
  

• Fields of text format based on radio button selection

  (Beginner) I have a form, which one party uses five 5 choice of radio button.  If "Choice5" is selected, I want to field 'X' (in the form) to display a red border.

  I need assistance with the JavaScript code for this action.

  Thank you!

  A minor change...

  "this.getField("X").strokeColor = event.target.valueAsString =='choice5 '? Color.Red: color.black;

  ... and it worked.

  Gilad thanks D!

• How to manage the current line with radio button selection?

  Hello world
  
  I have an ADF page with a table and a search"" button.
  I created a new attribute with VARCHAR2 (1) in the VO and dragged this attribute as the first column of the table. And changed this first column of the option button to select only a single line at a time.
  By clicking on the "Search" button, I need to get the current selected row values.
  
  How can I get the values of selected line?
  What code should I write to get the values of the selected line in the method of binding the button 'search '?
  
  All suggestions will be really useful.
  
  Thank you.

  Hello Kumar,
  I have a few comments on your case.
  >
  I created a new attribute with VARCHAR2 (1) in the t
  >
  1. you should create this attribute in the object of the entity, and then add it to the view object.
  2-do you need this radio that a button is defined for all lines? If yes then you need handle the case where the user set several lines and clear the value of the attribute for all other lines.

  >
  How can I get all the values of the current row in backing bean, binding of the Find method (method)?
  can u please give me the code for this?
  >
  If you mean by the current row is the row for which the value of the selected attribute is defined (the radio button is set to the rank), then you can write a method in the viewObjectImpl class and expose it to the customer interface and call it from your bean.
  Here is a sample Department table in the HR schema.

  //This method is written in DepartmentsViewImpl
  public Row getSelectedRadioRow(){
              //create a second row set to not impact the row set used in ADF
              RowSet duplicateRowSet = this.createRowSet("duplicateRowSet");
              //get the current row of the table to set it back after re-executing the VO
              DepartmentsViewRowImpl currentRow = (DepartmentsViewRowImpl)this.getCurrentRow();
              Row[] filteredRows = duplicateRowSet.getFilteredRows("IsSelected", "1");
              DepartmentsViewRowImpl row=null;
              if(filteredRows.length>0){
                  row = (DepartmentsViewRowImpl)filteredRows[0];
                  System.out.println("Department Name " + row.getDepartmentName());
                   }
              this.setCurrentRow(currentRow);
              duplicateRowSet.closeRowSet();
              return row;
          }
  

• CheckBox and radio button text color

  Hello

  This could be a very simple question, but I can't find the answer anywhere?

  How can I change the color of the labels on the radio buttons and checkboxes?

  I tried this:

  a1.setStyleProperty("textColor",0x990000);
  

  but I get this error:

  1061: Call to a possibly undefined method setStyleProperty through a reference with static type fl.controls:RadioButtonGroup.
  

  can anyone help?

  Thank you! : )

  You must use the TextFormat class to assign the text formatting...

  var newFormat:TextFormat = new TextFormat();
  Regardless of the font styles to apply

  newFormat.color = 0xFF0000;

  A1. SetStyle ("textFormat", newFormat);

• jQuery - enable/Devil form textbox on radio button selection

  Hello

  I can't seam to get my jquery to work.

  I have a male and female radio button, and I want the maiden name text box should be disabled when the male is selected and activated when the female is selected.

  By default, male is controlled and the maiden name text box is disabled.

  Here is what I http://jsfiddle.net/MmgAT/.

  Nothing happens when I select female.

  I would also like to add and remvoce a class with it. for example add class when the male is selected and remove when the female is selected.

  Thank you is advanced.

  Try something like:

  $("input[name=GenderRadio]").click(function(e) {
              if($("input[name=GenderRadio]:checked").val() == "Female") {
                   $("#maiden-name-input").removeAttr("disabled");
                   // do your removeClass
              } else {
                  $("#maiden-name-input").attr("disabled", "disbled");
                  // do your addClass
              }
  });
  

  --

  Kenneth Kawamoto

  http://www.materiaprima.co.UK/

• Average of the radio button selections, but exclude the equation 0

  This should be simple.  I've seen a lot of posts which should have led me to a Twitter.com response, but I still have trouble.

  Here we go:

  (1) I have 9 groups of radio buttons named: GMR1. 1_Score; GMR1. 2_Score; GMR1. 3_Score; GMR1. _Score 4; GMR1. 5_Score; GMR1. 6_Score; GMR1. 7_Score; GMR1. 8_Score; GMR1. 9_Score

  (2) each group of option buttons buttons 4 with the same values in each group:

  • "NA" where I put the Radio button choices under the Options tab = 0
  • "Fair" where I put the button choice Radio under the Options tab = 1
  • 'Good' where I put the Radio button choices under the Options tab = 2
  • 'Great' where I put the Radio button choices under the Options tab = 3

  Thus, the shape looks like a little at:

  GMR1. 1_Score

  • NA
  • Just
  • Good
  • Large

  GMR1. 2_Score

  • NA
  • Just
  • Good
  • Large

  and so on.  The user chooses a 1 option for each question.

  My goal is to get an average that excludes the selections of NA.  Compared with this average, I want to assign the specific text to appear.

  If I did it in 2 steps in excel, my formulas could look like:

  C7 = SUM (range) / COUNTIF (range, "> 0")

  = IF (C7 < 2, "overall score is fair, IF (C7 < 3, 'Overall rating is good', IF (C7 > = 3,"overall score is great!")))

  I think to that the following should work to count all selections does not match "NA" by excluding getField ("GMR1." + i + "_Score") .value == 0 a counter like the one below, but it is not!

  (The here's how I'm playing the part of the excel formula COUNTIF)

  ****************************

  var counter = 0;

  for (i = 0; i < = 9; i ++)

  {

  If (getField ("GMR1." + i + "_Score") .value == 1) counter ++;

  If (getField ("GMR1." + i + "_Score") .value == 2) count ++;

  If (getField ("GMR1." + i + "_Score") .value == 3) counter ++;

  }

  If (counter > 0) {}

  Event.Value = counter;

  } else event.value = "";

  ****************************

  The Sum (range) is simple enough using the "value is the sum "on the calculation of the properties of the text box tab.» But if I wanted, it's all happening in a block of code, then that won't work for me.

  ****************************

  The assignment of text based on the value average; I haven't got there yet.

  ****************************

  Help, please.  There must be a way to do all this in a fairly simple code that is simply eluding me.

  See if to change this instructs the following assistance:

  for (i = 1; i< 10;="" i++)="">

  It should have been an error in the JavaScript (Ctrl + J) console which provides clues as to what is wrong.

• Radio button selection fills the text boxes

  Another question from newbie to come!  I created a product generation.  There are four options different areas where only one option can be selected (to build the system they choose one option from each region, although only the first option area is mandatory).  I would use radio buttons to select one of the options in each area of the option and the price to fill areas of text with the appropriate price.  This will require a javascript work which is not a strong point.  Below these elements is a price total (hidden in the image below), I think I understand.  Any suggestions on how to ask this outing alternately to achieve the same result would be welcomed as well.

  Thanks in advance!

  Has created for each option button attached to it as the export price

  value, and then you can use a calculation script easy to apply this value

  to your text field.

• Achieve an image based on Radio button selection?

  Hello

  I created a movieclip which is simply a question and the user chooses from a list of option buttons

  I created this and it works fine, but I can't understand how to set up a button "Next" or "Submit" button that, according to the choice of performed radio button, the user accesses a specific image or label.

  I bought the Adobe Flash CS5 bible, but it seems to be little information on Radio control buttons, only how to put in place to test.

  any help would be grateful.

  Look at the the RadioButtonGroup class selectedData property.  You can probably use that in any function call so that you use the property of the value assigned to the RadioButton selected.  The property value you assign to the RadioButton (s) can be different picture that each would end by will.  So in your event handler for the button function send, you can simply use something like: gotoAndStop (radioGroupName.selectedData);

• Status field change based on Radio button selection

  I have a form that has a text field 'Status' and several radio buttons named: submitted for approval, approved, not approved, items received and distributed.  I need the status of self serve option button is selected.

  For example, when the 'Submit for approval' option button is selected, I want the State to be "Submitted for approval", then when the 'Authorized' option button is selected, I want to be "authorized" status and so on.  How can I do this?

  Thank you!

  Here is one approach.

  Steve