Add new N3048 to current stack of switch

Similar Questions

• Add a new host in already created vDistributed Switch

  I want to add new host in distributed Switch but I created distributed in New Data Center switch.

  You can help... How can add new host in already created vDistributed switch.

  Thanks for the reply. My problem has been resolved. In fact, I created vDS with option "vSphere Distributed Switch Version 5.1.0" and tries to add the version 5.0.0 of the host. Now, I added the host in vDS after upgrade the version of the existing host machine.

• I have an ipod touch 128 GB... but I'm almost to reach its maximum.  I want to do is buy a new ipod touch 128 GB and add new music without synchronizing the entire library to it... I have 2 ipods in conjunction with other copies

  I have an ipod touch 128 GB... but I'm almost to reach its maximum.

  I want to do is buy a new ipod touch 128 GB and add new music without synchronizing the entire library to it... I have 2 ipods in conjunction with the other copies of the other.

  is this possible?

  What should I do?

  Matt

  When you get the new iPod, you can use iTunes on your computer to select and synchronize the music you want on it, in the same way that you synchronize your current iPod - your iTunes will recognize them as different devices and will remember your choice of synchronization for each, it will not (unless, for example, you restore the backup of your current on her iPod) put the same content on both.

  (I asked for your post be moved to the iPod Touch forum, where you have posted is the iPad forum use.)

• How to add new folders in thunderbird for mac 38.2.0 POP3

  Switch PC to a macbook pro. Downloaded Thunderbird 38.2.0. I am trying to add new folders, under local folders. Trash and Outbox are in local folders, but I don't see how to add folders to organize my mail.

  Right-click

• Running Firefox 10.0.2, can not add new Mycroft Project search engines. Error message: "you need a browser that supports opensearch to install this plugin" Please help with the steps on how to solve this problem in Firefox, thanks

  Cannot add new Mycroft Project search engines in FF 10.0.2. Error message states: "you will need a browser that supports opensearch to install this plugin.

  You can install the Sherlock plugins or lacking as well?

  • http://mycroft.mozdev.org/Google-search-plugins.html

  Clear the cache and cookies from sites that cause problems.

  "Clear the Cache":

  • Tools > Options > advanced > network > storage (Cache) offline: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Tools > Options > privacy > Cookies: "show the Cookies".

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.org/KB/safe+mode

• How to add new data and delete old data from a custom text file?

  Hi guys!

  Well, I'm in a bit of trouble.

  I need to make a request to some GPS tools. Split data in indicators, generate coordinates (google maps format), and so it goes.

  One of the functions of the systems is the calculation of oscillation of coordinates. The formula should be: latitude 1 - latitude 2 = latitude AND longitude 1 - 2 = swing longitude longitude oscillation.

  Since I'm on two values, I thought: "Oh, if I connect these data in a file, I just pick up and do all the calculations part." Yes, this idea is adapted to my needs (even if it is not the best, the computer part solved my problem).

  BUT I don't see a way to write the current value of the loop and erase the old results.

  For example, suppose that loop 1 gave me 1.00000, 2,00000 coordinates and loop 2 gave me the coordinates 3.00000 and 4.00000. Right?

  My log file is similar to: 1.00000,2.00000; 3.00000,4.00000;

  Well, it works. However, we will look forward to loop 3: coordinates 5.00000,6.00000.

  If the program connects to it, I would get the chain: 1.00000,2.00000; 5.00000,6.00000; When I really need 3.00000,4.00000; 5.00000,6.00000;.

  For this reason, when I apply the calculation of oscillation, it will always take the most recent value and do all the calculations with the first result (from loop 1).

  Well, I wonder that there is a way to add new data to a file and replace the old values, with simple code. If anyone knows how, please respond here!

  Considerations:

  (1) I want to do it as simple as possible. My code is kind of great, and it is not appropriate to insert structures or library now.

  (2) maybe the explanation is not as simple as it is for me. Really, I couldn't find a better way to say what I need.

  (3) if someone has doubts as to my doubts, please just comment and I'll try to be as specific as possible.

  Thanks in advance!

  I guess my question is why write a file just to delete.

  If you pass an array of points from one iteration to another, you will have to take extra time to open the file, read the file, delete the old data, writing the new data, save the file, and then close the file.  It would be pretty much the same thing, but without having to go through the hard drive.

  Just a thought.

• How do I delete emails in the scan to address book so I can add new?

  I currently have the email set up the fine.  But when I scan a document and you want to send by email, there are already addresses in the address book which A) I don't want and can't remove, B) I can't add new ones constantly.  When I try to add new, it only allows me to add new to this email only.  The add to address book option is grayed out.  I looked at the manual, talked to tech on the phone who admit that they don't know how to do it.  Now, I have to type my email in full whenever I have something so he could scan scan to me.

  Can someone please help?

  go to network-view network set up and find the ip address.  Type in any web browser. from there, you can change the address book.

• BlackBerry Smartphones unable to add new contacts or edit existing ones

  For these last days, I was suddenly unable to modify existing contacts or add new contacts on my 8520. I tried to back up data and decommissioning and the upgrade of the operating system and updated to the current operating system, but I still have the same problem.  I just 340 contacts...

  Please help for technical assistance...

  Please remove the Yahoo! Messenger or Windows Live Messenger because he has problems with phones OS5 resulting in the inability to modify and add contacts.

• Add new data to the table in a log file

  Hi all. I am new to Oracle and I need to also write new data table in a logfile on Linux in order to live in the display screen. My first thought was to write a trigger, and after some research on googled around, I finally came to this:
  
  create or replace trigger foo_insert
  After Insert on foo
  for each line
  declare
  f utl_file.file_type;
  s VARCHAR2 (255);
  Start
  s: =: new.udate | '-' || : new.time | ' ' || : new.foo | ' ' || : new.bar | ' ' || : new.xyzzy | ' ' || : new.frobozz | ' ' || : new.quux | ' ' || : new.wombat;
  f: = utl_file.fopen ('BLAH_BLAH', 'current.log', ' a');
  UTL_FILE.put_line (f, s);
  UTL_FILE.fclose (f);
  end foo_insert;
  
  It seems properly to add new data in the log file as new inserts occur, but open and close the file each time are of course not optimal.
  In the app real new lines could have inserted every second or two. How can I optimize it? In addition, the log file will be archived and turned every day, so there must be a way to effectively report the relaxation of the oracle to reopen the case.
  
  
  Thank you!

  >
  I would like to pursue the optimization of the trigger
  >
  As Ed suggested you need to think this through a few others and refine the requirements.

  You said "I am new to Oracle. So you may not realize that anything a trigger didn't REALLY EVEN HAPPEN! The transaction can still be restored by Oracle or by the appellant. Want that all the 'hiccups' look too? If this isn't the case, then you can not use a trigger to do this. You need the process that translates the trigger being called to do logging after the data is stored.

  It should be noted that this requirement is before we can offer solutions to a problem.

  Assuming you want the trigger record all attempts change the data, then the best way I know to do that is to minimize the work does the trigger.
  Another fundamental principle is to follow the advice of the Ed and have a clear separation and distinction between "what" should be done and 'how' to do it.

  To minimize the trigger work change proposed Nicosa approach. Create an AUTONOMOUS_TRANSACTION stored procedure that handles the 'how' and just have the trigger to transfer data to the stored procedure values. The trigger provides data; He doesn't know, or care, what is done with the data.

  The stored procedure is then free to use the files, a table, write to a file or any other method is proving to be the best. You can change the methods without affecting the trigger.

  A queue or table may contain data, but again once you need to think about the obligation. Do you need fair access to data only once? Now, you want a "tail". But what happens if this requirement change tomorrow? You won't have to redesign the architecture.

  With a queue once you delete the queue data it won't here later if you want to get it again. With a table you can take as long as you want.

  I would like to start by using a table to store the data. If you use a sequence number or "insert_date" value, you can always query the data of interest. The table just collects data. He does not care how to use data.

  So, by using proven design principles and knowing that the requirements are for the most part unknown and may change unexpectedly, I would be:

  1. create an AUTONOMOUS_TRANSACTION stored procedure that accepts the parameter data and the thicket in a simple logging table.
  2. change your trigger to call the procedure to step #1
  3. create another procedure that performs a query of 'tail' for you will depend on 'insert_date' number or sequence. This query can write data to a file or return a cursor ref that your script can use to provide data for display.

  The approach described above takes each step in the process relatively independent of the other stages.

  Until put you the finishing touches to the requirements that you do not want to lock up your initial design.

• How do you add new shortcuts keyboard for the ESTK?

  

  In many applications of our days, the user has the possibility to add new shortcuts keyboard beyond those that exist among the plethora of keyboard coming already prepackaged assignments. According to their number and the how an existing feature has been located on the keyboard, the user might have to deal with the conflict of the F2 key to their new macro shortcut assignment while making the assignment previous null.

  The ESTK interface seems to have some of these features; for example, editing-> Preferences-> keyboard shortcuts, however, I am unable to find out where and how the user can add a new macro, and assign a keyboard shortcut.

  In this example, everything I wanted to do was to decide quickly on a line or a block of comments from a script. Currently (CS6), the only options seem to be limited to Shift + Ctrl + K using this method will insert only / / ~ at the beginning of a line already has text on it and will not work on a new blank line.

  How can we (CS6) ESTK user adds a new macro and assign it a keyboard shortcut?

  I thank very you much for any answer.

  Kelly

  > How the (CS6) ESTK user adds a new macro and assign it a keyboard shortcut?

  You can't, unfortunately.

  Peter

• I can't add new bookmarks

  I have been unable to add new bookmarks for awhile now,-either by click on the Star then the bookmarks icon in the toolbar (blue, flying star in the toolbar animation is happening, but the star remains empty) or in the menu on the right by clicking on a tab. I can add/edit the bookmarks if I go to the bookmark manager.

  I know that this issue was raised before, however, none of the answers posted (that I got at least) helped.

  I tried the solution places.sqlite. It did not help.

  I tried the addon in maintenance of places. It did not help.

  Thank you

  Most likely, this is caused by the IE Tab + extension. Try disabling or deleting on the page modules. Either:

  • CTRL + SHIFT + a
  • "3-bar" menu button (or tools) > Add-ons

  In the left column, click Extensions. Then you can find IE Tab + on the right side.

  Often, a link will appear above a disabled/removed extension to restart Firefox for the changes to take effect. You can complete your work on the tab and click one of the links in the last step.

  Which solves the problem?

  Note: I don't know if all the IE Tab extensions will be updated to fix this all seem to cause in Firefox 40. If you need to load some sites in Internet Explorer, you can use the following extension place - it sends the URL IE to load: https://addons.mozilla.org/firefox/addon/open-in-ie/

• Cannot add new bookmarks.

  I'm using Firefox 34.0.5 and recently discovered that I can not add new bookmarks. A keyboard < Ctrl > d does nothing. If I click on the star to make a bookmark, I see the animation of the star wheel above the bookmark icon and turns blue in the process. But after the animation is completed, the star is colorless and no bookmarks appear in the "do not sort" or any other bookmarks folder.

  I have Firefox "Reset" by the option "restart with modules disabled...". "menu of aid, but has not helped. I do not use any addons "bookmark".

  My PC is running Windows 7 Pro 64 bit. He has 32 GB of memory and a 256GB SSD as drive MBR (C).

  Is there a solution to my problem?

  Hello

  Try to see this help article:

  • Cannot add, change, or bookmark - how to fix

• Mac contacts won't let me add new groups?

  Program Contacts Mac doesn't let me add new groups.

  When I put a new group name in, it disappears and is replaced by group "Untitled."

  Yep, it's a bug. But you can rename the group after that. Select the Group and then go to Edition-> Rename Group. Then you can call it correctly.

• Right-click to add new folder on the desktop, is there

  I want to add new folders on the desktop
  (I use to be able to right-click and new folder was an option to add to the desktop)

  Hello sammyg11, you post to a support forum for the mozilla firefox browser. the question you asked is not really related to firefox but is a question about windows: in this case, please refer to the resources of foreign aid: www.sevenforums.com/tutorials/28677-new-context-menu-remove-restore-default-menu-items.html

• I can't add new bookmarks all of a sudden. Always occurs in safe mode

  I can add new bookmarks are no longer. The box will not be displayed on all Web sites, but is displayed on the yahoo homepage. I tried to disable a material option as suggested on mozilla troubleshooting guide located under options > tab advanced no chance... issue always happens in safe mode and I tried to reset my firefox settings with no luck.

  I forgot this option (when you use the full menu bar, this icon of the menu is hidden). So normally the White Star in the address bar icon turns yellow and a grave opens and allows you to change the bookmark (or cancel).

  I'm surprised that it works on one web page, but not others. Since you have already reset Firefox, two things come to mind:

  (1) install Firefox on itself to replace all the damaged program files. You can download the installer from: https://www.mozilla.org/en-US/firefox/fx/#desktop

  (2) work through the fixes in this article: cannot add, change, or bookmark - how to fix.