Radio sound is mono

Similar Questions

• Satellite 2410-414 card sound to mono or stereo?

  Is it possible to record in stereo from an external sound source using the map of his yamaha ac - xg? Is it possible to activate the line-in input in the audio settings and volume? Taking entry adjustable upward for stereo recording or does only record in mono?

  See you soon

  Hello

  As I know the unit has only a microphone in jack and headphone jack.
  The microphone jack allows you to connect a stereo microphone or three drivers mini jack for mono microphone or audio input. Line output, audio input jack line jack and line taken S/PDIF output not available on this device.

• How can I add a stereo or mono mix to the sound engineer - Satellite Pro A100-196

  I can't find this option in my settings of the sound, no mono or stereo under record?
  is it possible to add this feature to my laptop?
  or is it possible to do to the sound settings to make them?

  Hello

  Can you please tell us what how you save the music? You want to import from an external device? If so how is it connected to your laptop?

• I have sounds, too many, on the internet radio.

  SiriusXM radio looks like several stations playing at once. its principal is like an echo chamber. can hear background noises at the same time. is this solar flare or channel mixer? Radio sounds very well in car, but bad on the desktop. I tried solutions proposed by community, but no problems were detected.

  Hi tech diesel 835,.

  You can find these topics useful Sirius Support Center. The problem may be the signal.

• Terrible sound quality of MP3s on new 4 GB Fuze

  Just bought a new 4Gb player fuse.

  FM radio sounds good but each MP3 sounds terrible. :-(  They sound very hail & his singing as they are under water.

  -J' loaded the latest firmware on it.

  -J' tried a different variety of MP3 files with speed/quality levels.  Many of them sounded fine on an older iRiver.

  -J' played with the different equalizer settings.

  Any ideas?  If there is nothing easy, go back to the store soon.

  Unplug your headphones, and plug them push HARD and back in! The "rocket" has a very tight helmet, and it could play a role. My guess is that the FM is fine because the headphones are on the air.

• Is it possible to set the stereo output to mono in Windows 7

  Stereo to mono in Windows 7

  I looked everywhere in the settings of the sound and the accessibility settings in Windows 7. I can't find THE settings for the computer stereo sound to MONO.  I have the card REALTEK sound integrated on my Gigabyte motherboard.  I checked the settings as well.  The ONLY thing I've been able to do is to change the balance, and it does not solve my problem.  You see, I'm deaf in my left ear, so stereo records that I listen to with headphones on, I miss a lot of the sounds within the music or movie or whatever I'm listening.  On my Mac, all I have to do is click on a button in the settings, and the computer will play the stereo sound from TWO speakers, which is what I want on my PC.  I can't believe that this feature is not available in Windows 7.  Any ideas?

  Right-click on the volume icon in the taskbar > playback devices > select device > configure > choose Mono > then click > click on finish

  is theres another longer way to do this too just make a single lane on the spot but still running two-speaker MONO BAM

• Is there a way to set the audio output in mono in Windows 7?

  I have a set of speakers, but one of the speakers is broken, so for now if I have a stereo song I get only half of the music. Is it possible to set the sound output in mono on Windows 7 so I can listen to the stereo songs via a speaker? I'd rather do than buy a new set of speakers.

  Hi Jamsoup,

  I would like to inform you that, down from sound to mono-stereo sampling is not possible, since stereo sound is a sound standard setting.

  Stereo speakers are designed to produce a sound to both speakers and there is no option to change the settings to use as mono.

  I also suggest that you contact the speaker manufacturer or the manufacturer of the computer for assistance on this issue.

  Thank you, and in what concerns:
  Swathi B - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to merge the clips with a single track mono without the extra empty tracks?

  When I merge clips that I have synced using plural eyes, the merged clip has 3 empty audio tracks I have to delete every time I import the clip in the sequence. I tried deleting all empty the track sequence to merge, but I have still 3 empty tracks. I want to just import a single audio track video and single.

  The sound is mono there should only be one track.

  I thought about it. If you right-click on the merged item and go edit > Audio channels and together the three other channels to 'None' it will only import the audio track. You can select all the clips merged and apply it to each of them.

• HP Pavilion g7-2251dx: Windows 10 IDT high definition Audio Driver Bug report.

  OK after upgrading Windows 8.1 for Windows 10 Home (The Free Upgrade) I have noise problems.

  IDT Sound Drivers (IDT High Definition Audio Codec):

  Speakers integrated into the laptop: they its OK but not as they did in point 8.1 of Windows.

  I've tested on the following:

  Music (sounded OK)
  Played a Youtube video (sounded OK)
  Played a video that I recorded on my PC (its OK)
  Played a show or a movie on Netflix (sounded OK)

  The portable built-in Microphone seems to be working well.
  
  Turtle Beach headset Z11: they sound like basically no Bass Mono instead of stereo there and The Sound is low even though the volume to 100.

  I've tested on the following:
  Play music (sounded bad)
  Played a Youtube video (sounded bad)
  Played a video that I saved on my PC (sounded bad)
  Played a show or a movie on Netflix (bad sound)
  
  In Windows 8.1 speakers embedded in the laptop and the Turtle Beach headset Z11 resembled stereo and strong (perfect).
  
  The helmet Microphone seems to be working very well.
  
  I plugged my headphones Z11 of Turtle Beach to HP from my sister who still has windows 8.1 and my Turtle Beach Z11 helmet sounded very good.

  I plugged my Z11 of Turtle Beach headset in my other sisters that has Windows 10 HP (she has upgraded to Windows 7) and my Z11 of Turtle Beach headset resembled Mono Stereo Instead of.

  It is also plugged into his ear and they looked like Mono Stereo Instead of.
  
  I tested another helmet my Turtle Beach Headset (This Headset plugs into the USB Port) P11 The Sound is perfect it sounds like stereo and not like Mono.

  However when I spoke into the microphone, I could hear my voice coming through the headset speakers (mainly the hearing talk me)
  -------------------------------------------------------------------------------------------
  Microsoft high definition Audio drivers:

  These major works of Drivers so if you just want to use these drivers:

  Uninstall driver IDT
  Restart your computer
  Next adjustment of Volume and other settings
  Right-click of your Volume icon in hand right corner
  or
  Right-click on start (the white Windows icon located to the left of the bottom of your screen)
  Click on Control Panel
  Click on hardware and sound
  Click sound
  Right click on the second peripheral speakers (or according to your to are called)
  Click on properties
  Now just go through each tab and change what you want to change.

  I only click on the Advanced tab, and then change the default Format for 16-bit platforms, 48000 Hz (DVD quality)
  Because that was what the default Format on Windows 8.1
  I also click on record and change the setting of the microphone 2 listed.

  Speakers integrated into the laptop: they its OK but not as they did in Windows 8.1

  I've tested on the following:
  Music (sounded OK)
  Played a Youtube video (sounded OK)
  Played a video that I recorded on my PC (its OK)
  Played a show or a movie on Netflix (sounded OK)

  The portable built-in Microphone seems to be working well.

  Z11 headphones Turtle Beach:

  I've tested on the following:
  Play music (sounded great)
  Played a Youtube video (sounded great)
  Played a video that I saved on my PC (sounded great)
  Played a show or a movie on Netflix (sounded great)

  The helmet Microphone seems to be working very well.

  Always noticed his Mono with your helmet?

  Try this:
  Plug in your headphones
  Right-click of your Volume icon in hand right corner
  or
  Right-click on start (the white Windows icon located to the left of the bottom of your screen)
  Click on Control Panel
  Click on hardware and sound
  Click sound
  Right click on the second peripheral speakers (or according to your to are called)
  Click on disable
  Right click on the second peripheral speakers (or according to your to are called)
  Click on Enable
  Now your sound is heard as stereo instead of Mono.

  --------------------------------------------------------------------------------------------
  I tried the sound of setting here is what I tried:

  I uninstalled IDT audio driver I went into Control Panel and uninstalled the IDT Audio driver.

  Then I restarted my computer and I reinstalled the drivers of HP's Windows 8.1.

  After restarting my computer again, I checked to see if everything was back to normal, but it is not yet sounded even.
  
  When I right click on the "speaker" icon and then choose playback devices here is what was posted:
  The top unit is called:
  Its digital display (AMD high definition Audio Device) not connected
  OK, this is Normal.
  
  The central device is called:
  Speaker / device by default HP (IDT High Definition Audio Codec)
  OK, this device is also Normal.
  
  The background feature is called:
  Communication by default communication device Headphones (IDT High Definition Audio Codec)
  OK in Windows 8.1 this device has been disabled by default but in Windows 10 it is activated and listed as default communications device.

  So I thought that if I just disabled it my Turtle Beach P11 helmet would return to normal, but it didn't she sounded still, I even restarted my computer.
  
  OK, so I tried to set the Communications headset as device by default but when I right click and click on set as default device it wouldn't let me.
  
  I then disabled speaker / HP and tried to set it as default device it wouldn't let me.
  
  When I disabled speaker / HP Groove Music said he could not detect an Audio device in order to activate the speaker / HP and people with disabilities
  Helmet of communication.
  ---------------------------------------------------------------------------------------
  My computer is a HP Pavilion 2251dx g7

  Audio ID:

  Computer built-in Laptop speakers:
  HDAUDIO\FUNC_01 & VEN_111D & DEV_76D9 & SUBSYS_103C184B & REV_1001
  HDAUDIO\FUNC_01 & VEN_111D & DEV_76D9 & SUBSYS_103C184B
  
  Turtle Beach z11 headphone 3.5 mm Jack:
  Sorry no Audio for this one hardware ID that he doesn't use the same above, I think.
  
  P11 headphones from Turtle Beach USB:
  USB\VID_10F5 & PID_0231 & REV_0100 & MI_00
  USB\VID_10F5 & PID_0231 & MI_00
  
  If you need more info let me know.

  Thanks for reading all of this I hope that soon, there is a Solution.
  ------------------------------------------------------------------------------------------
  A temporary Solution:

  After you have solved the problem by reading through countless messages try every difficulty that none of them I went into Control Panel and he took a glance at the the Dolby Advanced Audio Control Panel now I never tested with this before so far but I was able to fix the Audio questions here is exactly what I did :

  When you use your built-in Laptop speakers or possibly other speakers:
  Right-click on start (the white Windows icon located to the left of the bottom of your screen)
  Click on Control Panel
  Click on hardware and sound
  Click Dolby Advanced Audio
  Click on listening experience
  Check Dolby Advanced Audio

  I've tested on the following:
  Play music (sounded great)
  Played a Youtube video (sounded great)
  Played a video that I saved on my PC (sounded great)
  Played a show or a movie on Netflix (sounded great)

  When you use your headset from Turtle Beach Z11 or possibly other headphones:
  Right-click on start (the white Windows icon located to the left of the bottom of your screen)
  Click on Control Panel
  Click on hardware and sound
  Click Dolby Advanced Audio
  Click on listening experience
  Uncheck Dolby Advanced Audio now, your headset should ring loud instead of sound like Mono and stereo and crappy.

  I've tested on the following:
  Play music (sounded great)
  Played a Youtube video (sounded great)
  Played a video that I saved on my PC (sounded great)
  Played a show or a movie on Netflix (sounded great)

  You need to keep the box checked when you use your built-in Laptop speakers, otherwise they will sound like Mono and crappy.
  
  So basically when you plug in your headphones uncheck the box.
  
  So basically when you disconnect your headset check box.
  
  If you have messed with the implementation in and want to return to the default value:
  Click Advanced settings
  Click on Reset

  IDT Sound Drivers (IDT High Definition Audio Codec):
  Always noticed his Mono with your helmet?

  Try this:
  Plug in your headphones
  Right-click of your Volume icon in hand right corner
  or
  Right-click on start (the white Windows icon located to the left of the bottom of your screen)
  Click on Control Panel
  Click on hardware and sound
  Click sound
  Right click on the speakers of intermediate device / HP (or according to the your are called)
  Click on disable
  Right click on the speakers of intermediate device / HP (or according to the your are called)
  Click on Enable
  Now your sound is heard as stereo instead of Mono.

  Microsoft high definition Audio drivers:
  Always noticed his Mono with your helmet?

  Try this:
  Plug in your headphones
  Right-click of your Volume icon in hand right corner
  or
  Right-click on start (the white Windows icon located to the left of the bottom of your screen)
  Click on Control Panel
  Click on hardware and sound
  Click sound
  Right click on the second peripheral speakers (or according to your to are called)
  Click on disable
  Right click on the second peripheral speakers (or according to your to are called)
  Click on Enable
  Now your sound is heard as stereo instead of Mono
  ----------------------------------------------------------------------------------------
  I'm testing all my games to ensure that the work of games and the sound works.

  I use my temporary Solution to test all the games.

  After resetting my PC the sound worked fine with my temporary Solution.

  Castlevania: Lord of Shadow Ultimate Edition:

  The sound was great on my Turtle Beach Z11 helmet.

  Castlevania: Lord of Shadow 2:

  The sound was great on my Turtle Beach Z11 helmet.

  Darksiders Pack franchise:
  Darksiders II:

  The sound was great on my Turtle Beach Z11 helmet.

  Darksiders:

  The sound was great on my Turtle Beach Z11 helmet.

  Deus Ex Human Revolution - Director s Cut:

  Download still can not test it yet.

  The Elder Scrolls IV: Oblivion Game of the Year Edition:

  The sound was great on my Turtle Beach Z11 helmet.

  The Elder Scrolls V: Skyrim legendary Edition:

  The sound was great, but even with my temporary fix the sound on my headset Turtle Beach Z11 was low I actually had to put the Volume slider almost up just to hear everything correctly.

  Fallout New Vegas Ultimate Edition:

  The sound was great on my Turtle Beach Z11 helmet.

  Grand Theft Auto IV: Complete Edition:

  The sound was great on my Turtle Beach Z11 helmet.

  Metal Gear Rising statement:

  The sound was great on my Turtle Beach Z11 helmet.

  Soul Murder Suspect:

  The sound was great on my Turtle Beach Z11 helmet.

  Quantum Conundrum:

  The sound was great on my Turtle Beach Z11 helmet.

  Saints Row Franchise ultimate Pack:
  Saints Row 2: download still can not test it yet.

  Saints Row third: download still can not test it yet.

  Saints Row IV:

  The sound was great on my Turtle Beach Z11 helmet.

  Sleeping Dogs final edition:

  Download still can not test it yet

  Thief: Master thief Edition:

  The sound was great on my Turtle Beach Z11 helmet.
  ------------------------------------------------------------------------------------------
  I could not Downgrade from Windows 8.1 because it said that files deleted even if windows.old was still there, so I just did a Reset instead.

  Thanks to my temporary fix Audio problems are gone, but I hope that HP releases new drivers, so I can't use my temporary Solution.

  Also I hope HP or Microsoft releases new drivers for the Synaptics TouchPad so that people can save their settings.

  This has been corrected by James Yerkes on Microsoft Community:

  Open regedit.exe

  Navigate to:
  HKEY_LOCAL_MACHINE\SOFTWARE\Synaptics\SynTP\Install

  Note it's the LOCAL MACHINE, not the CURRENT USER.

  Search for a key in the installation folder called DeleteUserSettingsOnUpgrade

  Double click and change the value to 0

  Now go back in the Panel of Synaptics, put all how you like and restart.

  in any case if someone has problems with Windows 10 Post here and I'll see if I can help you but I recommend resetting your PC in recovery Menu so that most of the problems will be solved then I would install all my drivers from the manufacturer.

  I am currently using window 8.1 1 driver from AMD and HP drivers.
  -------------------------------------------------------------------------------------------------
  This may not work for everyone, but if you have the same laptop and headphones I don't then it should work.

  I posted this as well on Microsoft Community:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_10-other_settings/Windows-10-IDT-high-defin...

  ---------------------------------------------------------------------------------------------------

  Hey everyone here is an update.

  Since microsoft rolled out updates for windows 10 mainly the updated driver to update I had is no longer using the old methods such as the use of the old HP drivers to this windows 10 drivers working for my laptop then everything works fine.

  I always use drivers from AMD for My APU (CPU and graphics card), but everything else is Microsoft I using Microsoft drivers for the month now and have had no problem.

  I hope that everyone knows success with these drivers.

• Camileo H20-low voice level

  Hello boys,.
  A few days ago, I bought Camileo H20, it's very pretty, but while viewieng of videos, the volume of voice is not acceptable to me.
  If I want to hear the voice I have my tv on max volume. Is this a bug in the firmware or my cam is broken?
  Is any firmware solved this problem?

  and anoither question, I am using standard crc 29 inch tv now, if I change to fullHD 1920 x 1080, the picture quality will be better?
  If it makes sense to change tv?

  Is the best,
  wader

  Post edited by: kingwader

  HI, has what kind of sound, stereo/mono/dolby, I couldn't find?
  It has one or more microphones on it?

  This camcorder has just a maxim resolution 1440 x 1080 p not full hd, but for a 4/3 aspect that's the best I could say; any standard TV is prohibited :D
  Changing the tv has all senses :)

  Post edited by: dan_me

  Post edited by: dan_me

• M40 - 129 - trouble

  Hi guys,.

  2 weeks ago, I bought my satellite M40 129 with
  Harman/kardon. I had 2 problems.

  1) SOUND through the HEADSET
  Songs (CD or mp3s) I'm listening on my 3 year old office
  through good quality well real, true stereo headphones.

  On my laptop...
  -If I listen to it with the built-in speakers, very well.
  -If I listen to it with headphones, poor quality sound like mono.
  I also tried with Virtual Sound to make it better,
  but I don't get the real stereo as my office.
  The sound card on my desktop computer is more than 5 years,
  but it sounds a lot better than the M40 129 through the headset.

  No idea how to improve?
  (I have the driver 5.12.1.5240 version)

  2) NOISE WEIRD PEEP
  I don't know how to describe it, but I get noise weird peep
  my laptop. Sometimes it disappears, but it doesn't come
  Precedent.

  No idea how to get rid of this noise to peep?

  I haven't worked a lot with the laptop again.
  I hope not to have surprises.

  -Aykut (of Germany)

  Hello

  (1) if the sound is good enough try to do better using a graphic equalizer on the reader you use and also check the sound properties and audio especially in the advanced audio properties. I noticed that fake adjustment result with very poor sound quality
  (2) I found an info that some strange noises occur if the sound card power is set on the power supply Mode. Please try to change to no. energy savings.

  Hope that will help you. Your device is a new and I believe that any update of the BIOS is necessary.

• You want a helmet pair BTA - 6030 Dongle & Logitech HS200 - what service?

  Hello

  I'm using a Dongle of BTA - 6030 as station Bluetooth and I have a headset Logitech HS200, I want to make a pairing.
  It is a headset stereo bluetooth with microphone on this subject. Very nice actually.

  Now, using the Toshiba Bluetooth stack, I can match my helmet, 3 ways when you use the custom properties.
  These classes of service are:
  1 Audiosink
  2 hands-free kit
  3 helmet

  The first gives a nice, good quality stereo sound, but not micro. The other 2 give the use of microphone, but the sound is mono, only one ear of the left earpiece.

  I think I need an another "class of Service", but how do you choose one?

  Who knows how I can configure the service to use manually? Because obviously the software does not provide the good by itself.

  You're right that audiosink is for music (stereo, high audio quality, sets, audio-only streaming not the rear channel is required for micro for example). Handsfree (mono, low quality audio, two-way) for VoIP applications and headphones (mono, low quality audio, two-way) for manual use. However, you should also hear mono audio transmissions on both speakers of your device. If this isn't the case, then you have any other problem.

• His need to run more slowly?

  internet radio - sounds Chipmunks singing songs - the conversation about the games or video is sharp loud

  internet radio - sounds Chipmunks singing songs - the conversation about the games or video is sharp loud

  ===========================
  If you have a Realtek Audio Driver...
  This can be caused by the karaoke
  settings in Realtek Sound Effect Manager.

  Go to the control panel and open Sound
  Effect of Manager / sound effect tab...
  Karaoke set to + 0

  More info...

  Using the sound effect Manager
  http://h10025.www1.HP.com/ewfrf/wc/document?LC=en&DLC=en&cc=us&DocName=c00377375

  The card Realtek HD Audio Driver user manual
  http://UK.TS.Fujitsu.com/RL/servicesupport/TechSupport/boards/soundcards/RealTekHDA/hd_audio_driver_usermanualver1-00_0418-05 [1] .pdf

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Problem of his Palm t5 (research)

  Hello!

  Two days ago my t5 palm stopped play sounds via the internal speaker (his helmet seems to be ok). Posts on this forum say that it is a hardware problem (micro-switch is stuck in a headphone jack). At least in my case, I need a more complex explanation:

  -The internal speaker stopped working without any interference in the headphones (I do not plug headphones into the Palm). Most people have this problem after disconnecting the headset.

  -J' was able to set my speakers to life by simply plugging in the AC adapter / CC. President Ping with a usual sound and worked for a few hours, that dies again.

  -At least twice, I could hear sounds after a hard reset. But only until I tried to launch any application. Then he was silent again.

  -As for now, I hear 'clicks' of the speaker when I connect my T5 to hotsync cable and press the hotsync button. Still more - if I have press the hotsync button while the cable is not plugged into the USB port - and wait 30 to 40 seconds, I see a box with the message "hotsync failure" alarm and can hear the sound of the mono speaker alarm Palm. So it is again being mute.

  With a background in electronics, I opened the unit and checked the sound elements visible:

  -L' speaker is OK, the measured resistance is recommended on the speaker (7.8 vs 8.0 ohm)

  -Points of motherboard are OK

  -There is a voltage V 1.68 on the two points vs. the ground, but no difference in voltage between the pads.

  -5-pin headset plug seems to be OK. Microswitch pads (two pads on a basis of a Jack) have no resistance measured when the socket is empty and are disconnected when headphones are plugged in.

  -J' have tried to short-circuit buffers with external cable - but no effect dip switch - sound is always redirected to the helmet.

  -J' tried to connect the internal speaker to the headphone channel. It works, but the rate of release of palm is unacceptable (headphones are devices to 30 ohms, and I believe that internal speaker is connected through some elements of energy saving).

  I'm completely perplexed with my problem of his palm. This may not be a pure hardware problem as he plays sometimes a few sounds via mono speaker. But if this is a problem in a software - how in hell, he survives device resets?

  Any ideas?

  Hello!

  Indeed, the problem was multiple connector. It seems that cable flat keyboard connection and connector multiple base with a main card had isolation deteriorated between some of his sons and a surface of steel on the base. Now, I remember that some time ago my Palm was irregularly to hot-sync mode even when the hot sync cable was not plugged.

  After that I put a piece of insulation between the metal base and a flat cable (which covers the hard edge of the base metal) mono speaker returned to life. Please put this in a FAQ or KB if possible.

  It would be nice for palm-engineers (if palm still has some) to build a utility program that allows the user to select the device audio default substitution of the system. See cool head for treo on sourceforge (does not work on palm t-series).

  Thank you!

  Message relates to: Tungsten T5

• Audio limitation in CS6 multi-cam?

  I try to use stereo audio of my source files when I create a multi-cam clip (I confirmed that the source files are indeed stereo because there is a different content on the left and right sides and when I put it that in a new sequence on its own the source will use 2 audio tracks).

  However, if I create a multicam video in the media browser and bring in a new sequence, the sound becomes mono and refers only to the left of the source files and pans that Center, which makes the unusable right.

  Is this a bug?

  If the right channel is on the A1, and the left channel is on A2, you must open the camera sequence multiple source in a timeline and select A2.

  Here is the part of the aid, I wanted you to notice:

  By default, Premiere Pro CS6 allows only to audio channel in the source multi-cam sequence. For editing multi-camera workflow, select manually before you change the sequence target of the other audio tracks. To activate the audio tracks to the sequence camera multiple source, follow these steps:

  1. Open the camera sequence multiple source by clicking on the icon to sequence multiple camera source in the project Panel, right-click (Win) or control-click (Mac OS), the icon, and then choose open in the timeline.
  2. Opens in the timeline. Select the audio tracks and then activate the other audio tracks by clicking on the button toggle track output for each audio track that you want to monitor.

  Now that your audio tracks selected are enabled, you can close the sequence.

  You should now be able to monitor the two channels that you cut your source multicamera sequence.

  Let us know if it worked for you.

  Help section: http://helpx.adobe.com/premiere-pro/using/editing-multi-camera-sequences1.html#id_60276