RADIUS auth on ipsec

Similar Questions

• Activation of RADIUS Auth/Acct on WLAN controller 4402

  Hi all

  Just need to activate authentication RADIUS and accounting on Cisco 4402 WLAN controller, so this controller WLAN what admins can be authenticated through a RADIUS server.

  I want to assure you that I could connect via the console or the local user account, if the RADIUS auth/acct on WLAN controller does not work for some reason any. I don't want me locked out if RADIUS auth/acct does not work.

  I have set up RDIUS for switches cisco 3750 and works very well.

  any suggestions please.

  Thank you very much.

  Keita.

  You must set the order

  Security > priority > user management

  Network user is for wireless authentication.

  ~ BR
  Jatin kone

  * Does the rate of useful messages *.

• RADIUS Auth Login and VPN is in conflict...

  Hello

  Im trying to setup a 7204 to authentication radius connection, even if the router is also configured with RADIUS for VPN access. How can I configure it for both using 2 raidus different servers? the connection through RADIUS works fine on another router, although this one does not have VPN access so there is no conflict.

  My config:

  / * Style definitions * / table. MsoNormalTable {mso-style-name : « Table Normal » ; mso-tstyle-rowband-taille : 0 ; mso-tstyle-colband-taille : 0 ; mso-style-noshow:yes ; mso-style-priorité : 99 ; mso-style-parent : » « ;" mso-rembourrage-alt : 0 à 5.4pt 0 à 5.4pt ; mso-para-marge-top : 0 ; mso-para-marge-droit : 0 ; mso-para-marge-bas : 10.0pt ; mso-para-marge-left : 0 ; ligne-hauteur : 115 % ; mso-pagination : widow-orphelin ; police-taille : 11.0pt ; famille de police : « Calibri », « sans-serif » ; mso-ascii-font-family : Calibri ; mso-ascii-theme-font : minor-latin ; mso-hansi-font-family : Calibri ; mso-hansi-theme-font : minor-latin ; mso-bidi-font-family : « Times New Roman » ; mso-bidi-theme-font : minor-bidi ;} rayon de serveur AAA groupe RADIUS_AUTH
  Server x.x.3.11 auth-port 1645 acct-port 1646

  / * Style definitions * / table. MsoNormalTable {mso-style-name : « Table Normal » ; mso-tstyle-rowband-taille : 0 ; mso-tstyle-colband-taille : 0 ; mso-style-noshow:yes ; mso-style-priorité : 99 ; mso-style-parent : » « ;" mso-rembourrage-alt : 0 à 5.4pt 0 à 5.4pt ; mso-para-marge-top : 0 ; mso-para-marge-droit : 0 ; mso-para-marge-bas : 10.0pt ; mso-para-marge-left : 0 ; ligne-hauteur : 115 % ; mso-pagination : widow-orphelin ; police-taille : 11.0pt ; famille de police : « Calibri », « sans-serif » ; mso-ascii-font-family : Calibri ; mso-ascii-theme-font : minor-latin ; mso-hansi-font-family : Calibri ; mso-hansi-theme-font : minor-latin ; mso-bidi-font-family : « Times New Roman » ; mso-bidi-theme-font : minor-bidi ;} radius AAA authentication connexion networkaccess groupe local

  / * Style definitions * / table. MsoNormalTable {mso-style-name : « Table Normal » ; mso-tstyle-rowband-taille : 0 ; mso-tstyle-colband-taille : 0 ; mso-style-noshow:yes ; mso-style-priorité : 99 ; mso-style-parent : » « ;" mso-rembourrage-alt : 0 à 5.4pt 0 à 5.4pt ; mso-para-marge-top : 0 ; mso-para-marge-droit : 0 ; mso-para-marge-bas : 10.0pt ; mso-para-marge-left : 0 ; ligne-hauteur : 115 % ; mso-pagination : widow-orphelin ; police-taille : 11.0pt ; famille de police : « Calibri », « sans-serif » ; mso-ascii-font-family : Calibri ; mso-ascii-theme-font : minor-latin ; mso-hansi-font-family : Calibri ; mso-hansi-theme-font : minor-latin ; mso-bidi-font-family : « Times New Roman » ; mso-bidi-theme-font : minor-bidi ;} groupe par défaut AAA autorisation exec RADIUS_AUTH if-authentifié

  / * Style definitions * / table. MsoNormalTable {mso-style-name : « Table Normal » ; mso-tstyle-rowband-taille : 0 ; mso-tstyle-colband-taille : 0 ; mso-style-noshow:yes ; mso-style-priorité : 99 ; mso-style-parent : » « ;" mso-rembourrage-alt : 0 à 5.4pt 0 à 5.4pt ; mso-para-marge-top : 0 ; mso-para-marge-droit : 0 ; mso-para-marge-bas : 10.0pt ; mso-para-marge-left : 0 ; ligne-hauteur : 115 % ; mso-pagination : widow-orphelin ; police-taille : 11.0pt ; famille de police : « Calibri », « sans-serif » ; mso-ascii-font-family : Calibri ; mso-ascii-theme-font : minor-latin ; mso-hansi-font-family : Calibri ; mso-hansi-theme-font : minor-latin ; mso-bidi-font-family : « Times New Roman » ; mso-bidi-theme-font : minor-bidi ;} rayon-serveur hôte x.x.3.11 auth-port 1645 acct-port 1646 clé xxxxxx

  line vty 0 15

  / * Style definitions * / table. MsoNormalTable {mso-style-name : « Table Normal » ; mso-tstyle-rowband-taille : 0 ; mso-tstyle-colband-taille : 0 ; mso-style-noshow:yes ; mso-style-priorité : 99 ; mso-style-parent : » « ;" mso-rembourrage-alt : 0 à 5.4pt 0 à 5.4pt ; mso-para-marge-top : 0 ; mso-para-marge-droit : 0 ; mso-para-marge-bas : 10.0pt ; mso-para-marge-left : 0 ; ligne-hauteur : 115 % ; mso-pagination : widow-orphelin ; police-taille : 11.0pt ; famille de police : « Calibri », « sans-serif » ; mso-ascii-font-family : Calibri ; mso-ascii-theme-font : minor-latin ; mso-hansi-font-family : Calibri ; mso-hansi-theme-font : minor-latin ; mso-bidi-font-family : « Times New Roman » ; mso-bidi-theme-font : minor-bidi ;}      login authentication networkaccess

  The line below is used for VPN authentication:

  RADIUS-server host x.x.8.12 auth-port 1812 acct-port 1813 key xxxxxx

  AAA of authentication ppp default local
  Ray of AAA to authenticate ppp vpdn group

  AAA authorization network default local
  RADIUS AAA authorization network vpdn group
  Group AAA authorization auth-proxy default RADIUS
  AAA accounting delay start
  accounting AAA periodic update 5
  start-stop radius group AAA accounting network default

  For some reason, it does not. I can't access the router and authenticate via radius x.x.3.11 server. I think there is a conflict between the VPN and authentication of connection but im not sure how to solve this problem.

  any help would be greatly appreciated.

  "ray of aaa of ppp authentication vpdn group.

  'radius of group' means 'take any server radius from the global list'.

  Change it to 'group mygroup' and boom, you give it a subset of radius servers

• Several groups of RADIUS auth on a single Windows Server

  We have several groups RA VPN on a 3845 router.

  Authentication RADIUS which is currently happening between the 3845 and one Windows 2008 Server.  We have a group of specific windows which AD users are members, and they are allowed to connect through the VPN.

  I create a new group of VPN, which should only allow different users of the AD.  Is it possible to create another association of RADIUS on the same server, or do I need to authenticate to a different Windows Server?

  Thank you

  Tyler

  Hey Tyler,

  If I understand the question, here's what you have to say.

  There are several groups on the announcement. currently 1 user group special on AD connect very well to the RAVPN.

  Now you want to connected VPN or authorized for another group on AD. Basically, you want to control access to resources based on the groups that they belong to the advertising. Am I wrong?

  You use the aaa server is the RADIUS. I don't think you can do authentication and control of access based on the ad groups using RADIUS.

  I would say try LDAP.

  http://www.Cisco.com/en/us/docs/iOS/sec_user_services/configuration/guide/sec_cfg_ldap.html

  I hope this helps.

  Kind regards

  Anisha

  P.S.: Please evaluate the useful messages

• WAAS for RADIUS and Windows Server 2012 NPS server configuration

  I have trouble getting our WAAS to authenticate devices and connection via RADIUS.  Running NPS on Windows Server 2012.  Confirmed that my device WAAS can ping the IP address of the RADIUS server.  Using the attribute Type of administrative service under network policies.  Look in the event viewer, I get an error with event ID 15, "a malformed RADIUS message has been received of the xxxx-WAAS-01 customer. The data is the RADIUS message. »

  Right now, I can connect with only the local default user and password name.  Here are a few config for WAAS, running version 6.2.1:

  RADIUS server key *.
  Server RADIUS auth-host 10.194.10.13 port 1645
  !
  connection of local authentication enable secondary
  enable login authentication RADIUS primary
  local authentication configuration enable secondary
  Service radius Authentication configuration Select primary
  failover of authentication server unavailable

  I confirmed that my shared key is entered correctly on the WAAS and the NPS.  I have the switches/routers Cisco works well on the same RADIUS server.

  Someone had a bit of luck plug their WAAS to RADIUS devices using Windows Server 2012 and NPS?  If so, please share additional measures you have taken to get things to work.

  Hi Paul,.

  Based on the RADIUS error you probably experience failure CSCva14731. This was discovered with Cisco ACS, but can affect other RADIUS servers.

  To confirm, you can check the corresponding error in syslog WAAS:

  authenticate: % WAAS-UNKNOWN-3-899999: pam_radius_auth: talk_radius: RADIUS server did not respond (timeout 5 (sec))

  Also, this defect would not affect peripheral on software 5.x WAAS.

  The problem will be solved in 6.2.3 to come free.

• Authentication RADIUS Cisco switch

  Hello

  I have a cisco 2960 switch and currently trying to install radius authentication. My guy from microsoft do the side server, we have the correspondence of the keys and he says there is no problem on his side, but we still Pascal operate.

  Config of switch

  AAA new-model
  AAA authentication login default local radius group

  Server RADIUS auth-port host 10.0.0.13 1812
  0 of RADIUS-server key test

  line vty 0 4
  by default the authentication of connection

  switch and the radius server are installed on the same network. I did a debug and confused on the output. Can someone point me in the right direction.

  I did a radius authentication and aaa debug debugging

  AccessSwitch #.

  RADIUS/ENCODE (00001586): orig. component type = Exec

  RADIUS: AAA Attr not supported: interface [221] 4 92269176

  RADIUS / encode (00001586): down the type of service, "radius attribute 6 sur-pour-login-auth server" is disabled

  RADIUS (00001586): Config NAS IP: 0.0.0.0

  RADIUS (00001586): Config NAS IPv6:

  RADIUS / encode (00001586): acct_session_id: 20

  RADIUS (00001586): send

  RADIUS/ENCODE: Best local IP 10.0.0.56 for Radius server - address 10.0.0.13

  RADIUS (00001586): Sending a bunch of RADIUS IPv4

  RADIUS (00001586): Send access request ID 10.0.0.13:1812 1645/18, len 77

  RADIUS: authenticator 7 c B1 A0 55 62 45 7 AF b - E2 F2 48 4 C3 F0 72 98

  RADIUS: Username [1] 15 "james.hoggard".

  RADIUS: User-Password [2] 18 *.

  RADIUS: NAS-Port [5] 6 2

  RADIUS: NAS-Port-Id [87] 6 'tty2 '.

  RADIUS: NAS-Port-Type [61] 6 virtual [5]

  RADIUS: NAS-IP-Address [4] 6 10.0.0.56

  RADIUS (00001586): Started 5 sec timeout

  RADIUS: Receipt id 1645/18 10.0.0.13:1812, Access-Reject, len 20

  RADIUS: authenticator 80 CE C9 C2 D6 30 65 A9 - 07 9th 12 4 80 A9 3 c D8

  RADIUS (00001586): Receipt of id 1645/18

  AAA/AUTHENTIC/LOGIN (00001586): choose method list "by default".

  RADIUS / encode (00001586): ask "" password: ".

  RADIUS / encode (00001586): upload the package. GET_PASSWORD

  Thank you

  James.

  Yes, PAP always use text gross, and that doesn't provide any kind of security.  However, does not support administrative session with Ray chap/mschap.we cannot configure firewall/IOS devices for the Administration as a telnet/ssh session to authenticate users on the mschapv2 authentication method.

  If you need secure communications you can implement GANYMEDE.

  GANYMEDE + and RADIUS using a shared secret key for encryption for communications between the client and the server. RADIUS encrypts the password of the user when the client makes a request to the server. This encryption prevents a person from sniffing the password of the user using a packet Analyzer. However, other information such as username and the services being performed can be analyzed. GANYMEDE + does not encrypt only the entire load at the communication, but it also encrypts the password between the client and the server. This makes it harder to decipher the information on the communication between the client and the server. GANYMEDE + uses the MD5 hash in its algorithm of encryption function and decryption.

  ~ BR
  Jatin kone

  * Does the rate of useful messages *.

• AAA RADIUS 3750 x

  Hello!

  I'm troubleshooting an installation of battery new 3750 x - everything is wonderful save two issues, being the RADIUS. I have reflected the config a another pile of identical work but I am having no love with my DEPARTMENT. Debug RADIUS auth showed this - any ideas?

  I tried a few things including specifying my management interface VLAN as source for RADIUS, but it had no effect.

  I am running 15.0 (2) SE-IPBASEK9-m

  10:22:43: RADIUS: AAA Attr not supported: interface [221] 4

  10:22:43: RADIUS: 74 74 [tt]

  Thanks for your help

  HI John,.

  Take a look at this.

  AAA group Group1 radius server

  Server 10.10.220.130 auth-port 182 acct-port 1813

  The RADIUS authehtication listen on port 1812. Try this reconfiguration as below.

  AAA group Group1 radius server

  ACCT-port of the server 10.10.220.130 auth-port 1812 1813

  Concerning

  Najaf

  Please rate when there is place or useful!

• Problem with RADIUS and VRF in Cisco 6500

  Hello

  I have the following config of the radius authentication:

  AAA new-model

  AAA authentication login default local radius group

  AAA authorization exec default local radius group

  AAA - the id of the joint session

  IP source-interface Vlan31 vrf LEGACY RADIUS

  Server RADIUS auth-port host 10.10.4.18 1645 1646 acct-port-key 7 XXXXXXXX

  Server RADIUS auth-port host 10.10.5.15 1812 1813 acct-port-key 7 XXXXXXXX

  RADIUS vsa server send accounting

  RADIUS vsa server send authentication

  The work of Don t of authentication

  The sniffer radius server does not detect the Cisco 6500 packages, but the 6500 icmp packets do very well.

  # Ping vrf LEGACY 10.10.4.18 SOUrce VLAN 31 C6500

  Type to abort escape sequence.

  Send 5, echoes ICMP 100 bytes to 10.10.4.18, wait time is 2 seconds:

  Packet sent with a source address of 10.10.5.254

  !!!!!

  Success rate is 100 per cent (5/5), round-trip min/avg/max = 1/1/1 ms

  interface Vlan31

  XXXX description

  IP vrf forwarding LEGACY

  IP 10.10.5.254 255.255.254.0

  no ip redirection

  no ip proxy-arp

  no ip mroute-cache

  end

  It has fix my configuration?

  Can you help me?

  What IOS version you run on your 6500?

  Try the following:

  AAA new-model

  !

  RADIUS AAA server group RADLegacy

  10.10.4.18 server host

  10.10.5.15 server host

  IP vrf forwarding LEGACY

  !

  Group AAA authentication login default local RADLegacy

  default AAA authorization exec RADLegacy local group

  !

• VG224 and Verifone xx810 chip and pin component terminal modem

  Hi members of the community.

  I have a very specific problem I'd appreciate help with if anyone else has experienced this or something similar.

  We have a VG224 that provides analog lines for fax machines mainly on our campus. Recently, we had our Department of finance use machines to chip and PIN on these connections. Previously, we used streamline machinery, and they connect properly.

  The specific case I have is a Verifone vx810 machine which is connected to a VG224. The Verifone unitis able to deal with success and to authorize a transaction, but it cannot complete a download batch process or a TMS. I talked to the support company that rent us machines to and identified that the computer uses the following baud rate, bits of parity and stop for 2 different operations:

  For transactions: 2400 baud, parity/stop 7e1 (this works)

  For the batch upload/TMS: 19200 baud, parity/top 8n1 (it does not).

  In the case of the upload of batch/TMS, the machine connects, gets a connection to the remote end to the PSTN for about 10 to 20 seconds, then he tears because the modem negotiation fails. I've read various articles on forums CIHI and others say that data rates high speed can be a problem for the VG224, but nothing to suggest a problem with 19200. I also tried installing on an ATA186 and ATA showed the same symptoms, so I am inclined to think that this isn't just a firmware issue or bug with the VG224. I tried 3 different chip and PIN machines of the model vx810 and all have the same symptoms.

  Here's a copy of my current VG224 config. The VG224 is recorded in the CUCM via SCCP.

  version 12.4

  no service button

  horodateurs service debug datetime localtime

  Log service timestamps datetime localtime

  no password encryption service

  !

  hostname vg224

  !

  boot-start-marker

  boot-end-marker

  !

  forest-meter operation of syslog messages

  logging buffered 4096

  !

  AAA new-model

  !

  !

  AAA authentication login default local radius group

  the AAA authentication enable default

  AAA authorization exec default local radius group

  failure to exec AAA accounting

  action-type market / stop

  RADIUS group

  !

  !

  !

  AAA - the id of the joint session

  clock timezone GMT 0

  clock summer-time recurring UTC 4 Sun Mar 01:00 4 Sun Oct 02:00

  IP source-route

  IP cef

  no ip domain search

  !

  !

  No ipv6 cef

  !

  stcapp ccm-Group 1

  stcapp

  !

  stcapp function-access code

  !

  stcapp speed dial feature

  !

  !

  voip phone service

  Modem passthrough codec g711ulaw nse

  !

  !

  voice-card 0

  !

  username password

  Archives

  The config log

  hidekeys

  !

  !

  !

  interface FastEthernet0/0

  no ip address

  automatic duplex

  automatic speed

  !

  interface FastEthernet0/0.644

  encapsulation dot1Q 644

  IP 10.1.160.4 255.255.255.0

  !

  interface FastEthernet0/1

  no ip address

  Shutdown

  automatic duplex

  automatic speed

  !

  default IP gateway - 10.1.160.1

  !

  IP forward-Protocol ND

  IP route 0.0.0.0 0.0.0.0 10.1.160.1

  no ip address of the http server

  !

  exploitation forest installation local6

  interface FastEthernet0/0.644 source journaling

  logging

  SNMP-server RO community

  SNMP server location

  !

  Server RADIUS auth-port 1812 1813 acct-port host

  Server RADIUS auth-port 1812 1813 acct-port host

  RADIUS 3 server timeout

  RADIUS server key

  !

  control plan

  !

  !

  !

  voice-port 2/0

  cptone GB

  initial delays of 60

  timeouts interdigit 60

  timeout infinity ringtone

  activation of the caller ID

  !

  voice-port 2/1

  cptone GB

  initial delays of 60

  timeouts interdigit 60

  timeout infinity ringtone

  activation of the caller ID

  !

  voice-port 2/2

  cptone GB

  initial delays of 60

  timeouts interdigit 60

  timeout infinity ringtone

  activation of the caller ID

  !

  voice-port 2/3

  cptone GB

  initial delays of 60

  timeouts interdigit 60

  timeout infinity ringtone

  activation of the caller ID

  !

  voice-port 2/4

  no echo - cancel enable

  cptone GB

  initial delays of 60

  timeouts interdigit 60

  timeout infinity ringtone

  activation of the caller ID

  !

  !

  CCM-manager cisco Protocol fax

  CCM-Manager config server

  CCM-Manager config

  CCM-Manager local FastEthernet0/0.644 SCCP

  CCM-Manager sccp

  !

  !

  SCCP local FastEthernet0/0.644

  SCCP ccm version ID 1 6.0

  SCCP ccm 2 identifier version 6.0

  SCCP ccm identifier 3 version 6.0

  SCCP

  !

  SCCP ccm Group 1

  associate the ccm 1 priority 1

  associate priority 2 CCM 2

  associate the ccm 3 priority 3

  !

  transcode dspfarm profile 1

  associate the PCRS application

  !

  !

  voice pots Dial-peer 999200

  Service stcapp

  port 2/0

  !

  voice pots Dial-peer 999201

  Service stcapp

  port 2/1

  !

  voice pots Dial-peer 999202

  Service stcapp

  port 2/2

  !

  voice pots Dial-peer 999203

  Service stcapp

  2/3 port

  !

  voice pots Dial-peer 999204

  Service stcapp

  port 2/4

  !

  !

  !

  Line con 0

  line to 0

  line vty 0 4

  !

  NTP server

  NTP server

  end

  And a version of the show of the vg224:

  System to regain the power ROM

  System restarted at 14:30:34 CEST Wednesday 9 may 2012

  System image file is "slot0:vg224 - i6s - mz.124 - 22.T5.bin".

  Cisco VG224 processor (R527x) (revision 4.1) with 119808 K/K 11264 bytes of memory.

  Card processor ID FHK1432F2CC

  R527x CPU at 225 MHz, 40, Rev 3.1 implementation

  1 voice module 24 analog FXS edge V2.1

  2 FastEthernet interfaces

  Configuration of DRAM is 64 bits wide with disabled parity.

  63K bytes of non-volatile configuration memory.

  The system of fpga version is 250027

  The system of readonly fpga version is 250027

  Option for fpga system is 'system '.

  62496K bytes of ATA Slot0 CompactFlash (read/write)

  Configuration register is 0 x 2102

  This problem is really driving me crazy, if anyone can shed some light on what is perhaps the root cause of that I would be very grateful.

  I would say probably yes, devices compatible PCIDSS circulating on the network IP would be the way to go and that is something that we work, but currently we have units that can communicate using analog telephone lines.

  OK, PRI is clean so you must relay setup for connection of modem modem high speed work.

  I would not waste time with CSPC and go immediately to SIP or H.323.

• Authentication of the AAA on switch

  We are configuring 802. 1 x wired client. ISE is our AAA server. When configuring, I came across 3 commands different series

  (1) RADIUS-server host auth-port 1812 acct-port 1813

  Server RADIUS auth-port 1812 1813 acct-port host

  the RADIUS server key

  (2) RADIUS server for aaa group< radius="" group="" name="">

  Server auth-port 1812 acct-port 1813

  Server auth-port 1812 acct-port 1813

  (3) aaa server RADIUS Dynamics-author

  customer Server-key

  customer Server-key

  Now, we have already created in step 2 aaa server group.

  What is the importance of step 3. If I do not add a client by virtue of the dynamics-author, what effect this will have on the global configuration. Cost will not affect posture because of this

  Thank you

  Aditya

  Hello Aditya-

  Orders to step #3 configure the n (in your case, the switch) to accept the CoA (change permission) which is used for 802. 1 x network authentication. If you are only interested in the configuration of the switch for the administration of the system, then you don't need these commands however, if you are considering the deployment of 802. 1 x then you need them. For more information see this link:

  http://www.Cisco.com/c/en/us/products/collateral/iOS-NX-OS-software/identity-based-networking-services/whitepaper_C11-731907.html

  Thank you for evaluating useful messages!

• The AAA authentication and VRF-Lite

  Hello!

  I encountered a strange problem, when you use authentication Radius AAA and VRF-Lite.

  The setting is as follows. A/31 linknet is configured between PE and THIS (7206/g1 and C1812), where the EP sub-si is part of a MPLS VPN and VRF-Lite CE uses to maintain separate local services (where more than one VPN is used..).

  Access to the this, via telnet, console etc, will be authenticated by our RADIUS servers, based on the following configuration:

  --> Config start<>

  AAA new-model

  !

  !

  Group AA radius RADIUS-auth server

  Server x.x.4.23 auth-port 1645 acct-port 1646

  Server x.x.7.139 auth-port 1645 acct-port 1646

  !

  AAA authentication login default group auth radius local

  enable AAA, enable authentication by default group RADIUS-auth

  ...

  touch of 1646-Server RADIUS host x.x.4.23 auth-port 1645 acct-port

  touch of 1646-Server RADIUS host x.x.7.139 auth-port 1645 acct-port

  ...

  source-interface IP vrf 10 RADIUS

  ---> Config ends<>

  The VRF-Lite instance is configured like this:

  ---> Config start<>

  VRF IP-10

  RD 65001:10

  ---> Config ends<>

  Now - if I remove the configuration VRF-Lite and use global routing on the CE (which is OK for a simple vpn installation), AAA/RADIUS authentication works very well. "" When I activate transfer ip vrf "10" on the interface of the outside and inside, AAA/RADIUS service is unable to reach the two defined servers.

  I compared the routing table when using VRF-Lite and global routing, and they are identical. All roads are correctly imported via BGP, and the service as a whole operates without problem, in other words, the AAA/RADIUS part is the only service does not.

  It may be necessary to include a vrf-transfer command in the config of Group server as follows:

  AAA radius RADIUS-auth server group

  Server-private x.x.x.x auth-port 1645 acct-port

  1646 key ww

  IP vrf forwarding 10

  See the document below for more details:

  http://www.Cisco.com/en/us/partner/docs/iOS/12_4/secure/configuration/guide/hvrfaaa.html

• ISE - assignment of VLAN 7.2 WLC

  Good evening

  The authorization of the Wireless_Employees profile, assign vlan 666 employees wireless.

  ISE is passing VLAN 666 to the WLC - see attachment Radius Auth - VLAN666.jpg

  When I look on the WLC to wireless employee who has connected to the network, successuflly WLC is him always place in the pre-settings 7 VLAN.

  1. can you VLAN be pushed of ISE to the WLC (code 7.2.103) for the specific user session?

  2. If so, suggestions, why it does not work for me.

  Thank you.

  Cath.

  Cath,

  Here's a guide that will help with dynamic assignment of VLANs on a WLC.

  http://www.Cisco.com/en/us/Tech/tk722/tk809/technologies_configuration_example09186a008076317c.shtml#WLC

  Thank you

  Tarik Admani
  * Please note the useful messages *.

• How to circumvent the "Assistant" secpol.msc and configure State IPsec (esp, spi, enc, auth-trunc) and political (src, dst, in, on, fwd) directly as in the ip-xfrm Linux command?

  Right off the bat, the wizard tells me that I can't use a multicast address, when it is the only destination I am interested in security.  Here is exactly what I want to do - no more, no less (although I can use the mode of transport instead of tunnel at some point):

  #! / bin/bash

  Echo 2 >/proc/sys/net/ipv4/conf/eth0/force_igmp_version

  # NOTE: To avoid the possibility of breaking IGMPv2 snooping, src should ONLY be defined for SHIPPERS, NOT for RECEIVERS!  Otherwise, joins will be compromised by the IPsec encryption and the switch will not detect them.

  IP xfrm State flush; IP political xfrm hunting

  State of xfrm IP add src 10.0.2.15 dst 239.192.1.1 proto esp spi 0x54c1859e tunnel mode reqid 0x67cea4aa auth-trunc hmac\ (sha256\) 128 0xc8a8bf5ce6330699c3500bd8d2637bc1fa26929bab747d5ff2a1c4dddc7ce7ff enc cbc\ (aes\) 0xfdce8eaf81e3da02fa67e07df975c0111ecfa906561e762e5f3e78dfe106498e # aead rfc4106\ (gcm\ (aes\) \) 0x123456789abcdef0baddeed0deadbeeffeedface900df00d0fedcba987654321 128 #Error: duplicate 'ALGO-TYPE': 'aead' is the second value.

  xfrm IP strategy add 10.0.2.15 src 239.192.1.1 dst dir output stat CBC 10.0.2.15 dst 239.192.1.1 proto reqid 0x67cea4aa tunnel mode esp

  xfrm IP policy add 10.0.2.15 src 239.192.1.1 dst dir in src 10.0.2.15 stat dst 239.192.1.1 proto reqid 0x67cea4aa tunnel mode esp

  xfrm IP strategy add 10.0.2.15 src dst 239.192.1.1 dir fwd stat 10.0.2.15 src dst 239.192.1.1 proto reqid 0x67cea4aa esp tunnel mode

  A graphical interface which requires me to work in step by step mode (in particular to implement a relatively simple configuration of the shared key) with no idea of what irrelevant or confusing questions await us doing me no favor.  And while this computer uses Windows 7, the eventual target can use something older or newer.  I want to do is create the portable equivalent of a preferred scenario, no instructions to repeat the time-consuming and confusing.  This approach exist?  (I already checked cygwin and there seems to be no support for the ip packet, and even if there were, it seems not support sudo is.)

  Hello

  Thank you for visiting Microsoft Community and we provide a detailed description of the issue.

  I suggest you to send your request in the TechNet forums to get the problem resolved.

  Please visit the link below to send your query in the TechNet forums:

  https://social.technet.Microsoft.com/forums/en-us/home?category=WindowsServer

  Hope this information is useful. Please come back to write to us if you need more help, we will be happy to help you.

• IPSec VPN authentication problem against AD by RADIUS/ISA

  As background, I have a VPN IPSec authentication against the local database upward and running with access to my internal network and work with zero issues.

  So I would move offshore to the local database authentication and boince it is outside my ad.  I am running 2003 server so I configure ISA Server RADIUS and think I have it properly configured.  It is registered in the AD, I added my asa as a customer radius, customized remote access and connection request policies.

  The test of authentication in the ASDM he succeeds with all users who need.

  During the test through my client vpn on a remote computer, I get the connection terminated by a peer, no reason given.

  It is said of the event on the domain controller logs

  -l' user domain - user % name % has had access.

  directly after this, there is an entry

  -VPN-RADIUS-GP is denied access

  where VPN-RADIUS-GP is the name of the tunnel group policy in my ASA.

  Ive tried a lot of literature and a few forums and have not yet find any explanation as to why this would happen as username trying to authenticate to the ISA

  Anyone have any ideas?

  Thank you

  Mac

  group-policy VPN-Radius-GP external server-group VPN_Radius_Auth password aaaaaaaaaaaaaaaaaaaaaa

  It is a group-foreign policy, by definition, that it is defined on the AAA server group policy, so the ASA sends a radius access request to retrieve the attributes of group policy.

  See for example http://www.cisco.com/en/US/docs/security/asa/asa72/configuration/guide/vpngrp.html#wp1133706

  If this isn't what you want, then just remove the group policy and use internal (as the "q101 VPN GP" you).

  HTH

  Herbert

• Unable to set authentication of IPSec with RADIUS clients

  Hello

  I configured the VPN IPSec server for remote clients on Cisco 2811 with XAuth (see attached cisco vpn configuration). Initially, I configured clients extended authentication (Xauth) using a local database of IOS users and it worked fine, but then I tried to configure the authentication of clients through FreeRADIUS and got authentication errors (see part of freeradius log attached): in fact, instead of username/password name customer shipped Xauth Cisco sends a VPN-group/pre-shared key combination to FreeRADIUS. Obviously FreeRADIUS does not name of user and password in its database and answers with an error. Is it possible somehow to reconfigure Cisco such that it would be sent insead of name of user and password to VPN-group/pre-shared key or reconfigure FreeRADIUS so that he would interpret the VPN-group/pre-shared key parameters?

  xauth to the radius server must be not sending the group name and the password to the RADIUS. xauth should send the user name and password when the user authenticates.

  (1) you can try to authenticate to the server radius of the router itself, using the command 'test aaa'--> check if authentication works.

  (2) when you connect with the vpn client, you get prompted for the user name and password, and what do you have?