RAID driver is missing...

Similar Questions

• How upgrade to Windows 8 RT979UT - need RAID driver

  I want to spend my RT979UT to Windows 8 and keep the motherboard SATA configured in RAID. The installer of windows 8 reports that I need a driver (I think it says expressly "media driver"), at least I have change the BIOS setting to one of the IDE options (I think they were native and emulated?).

  Given that this system has the chipset AMD Radeon Xpress 1150, I tried the drivers on site AMD, more specifically the files that I unpacked of 12-10_vista_win7_win8_32 - 64_raid.exe on another system, but while the driver seemed to match, Setup was not convinced, always complaining that he was missing one or more drivers.

  I have update the latest version of the BIOS from the HP website.

  Because I was able to do an install when I changed the setting in the BIOS for an option to IDE, I think that the missing driver (s) is/is specifically RAID driver.  With this successful installation, I installed the AMD/Catalyst drivers as appropriate (I think that Device Manager showed that all devices are properly recognized), then changed the BIOS setting to RAID, but Windows wouldn't boot.

  Would I be able to find a driver that will allow me to level to Windows 8 with the Radeon Xpress 1150 configured in RAID?

  \c

  Hello:

  I would try the Vista driver of support for your PC and driver page.

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=12454&prodSeriesId=3253421&prodNameId=3253423&swEnvOID=2103&swLang=13&mode=2&taskId=135&swItem=vc-75484-1

  In addition, I do not understand why you change just the emulation of SATA in RAID in BIOS (Storage Options > Emulation SATA) and install W8.

  The Guide to install it on the link below, page 5.

  http://bizsupport2.Austin.HP.com/BC/docs/support/SupportManual/c00765938/c00765938.PDF

  The RAID driver should be included in the W8 installation media driver database already, I think that woulld. It is in the drive of W7.

  Thus, if for some reason W8 asks a driver, use the facility advanced, have the driver above extracted with No folder and copied to a USB flash drive, then select the RAID driver when you see listed flash player files.

  Make sure that you simply copy the 32-bit or 64-bit files according to the case, so there is no confusion.

  Paul

• Tecra S3 - need SATA / RAID driver for installing Windows XP Home edition

  I'm doing a new installation of windows xp on a Toshiba Tecra S3 model PTS30E-0DT03FDU
  Who knows where to find the RAID driver to load when you start the installation of xp?

  This model no longer appears in the driver download section.

  Of course, it is listed by download, but the older models are listed in the ARCHIVES.

  Please visit the download page for Toshiba - http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp - once again and the slot type of product choose Archive.

  For Windows XP Home edition, you will find RAID driver for download.
  Can find you it?

• Tecra A9 - driver is missing

  Tecra A9 model RTS52A-023017 running XP Pro (32-bit) Service pack 3
  Device shows problem with Device Manager
  Various drivers downloaded from Toshiba and Intel but unable to encourage drivers to work
  The laptop is currenlty displaying on it's own lcd but I am unable to change the resolution - no settings tab when you go to desktop properties

  I reinstalled XP SP3 but still no luck.

  Any suggestions?

  Hello!

  This driver is missing on your laptop?
  I think that it s because you display driver can t change the display resolution.

  Consult the Toshiba site. You will find all the drivers for your laptop:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Did you install the laptop using the Toshiba Recovery disk?

  Good bye

• Need Tecra S3 Raid driver for VISTA

  I "find many drivers to install vista on TECRA S3, but not the DIVER of RAID. It is essential to install vista. Can anyone help?
  Thanks Mike

  Perhaps Vista has not the RAID driver? Installing XP on a newer machine, I mean that you need to load some drivers, but not under Vista.

  Did you already installed Vista on your computer?

  See you soon

• Qosmio G30-175 - where to find RAID driver for Windows 7?

  I have a Toshiba Qosmio G30-175 and I need raid driver so I can install Windows 7. My operating system is XP and on Toshiba-home page, I can't find the driver.
  Can Enyboby please?

  Kenneth

  Hello!

  Have you ever tried the Vista driver? If this isn't the case, you need to test, because most of the Vista drivers are also work on Windows 7.
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  I hope it will work for you, but you can give us feedback on this subject. I think it could be interesting to other people, too. ;)

  Good bye

• Windows 7 can't detect the TOSHIBA Portege M400 RAID driver

  I put to level my M400 tablet from Windows XP to Windows 7.

  Questions of compatibility check out, all right. In research I realized I needed to upgrade the RAID driver to a version of Win7. So I downloaded which, from my external hard drive to install to Win7, and installing Win7 can't find it. I tried the same thing with a variant of Vista with no luck. Even through the installation on the hard drive itself, nothing happened. Impossible to get in the tio silent run command prompt, absolutely nothing. I'm back where I throw this computer out of my 4th story window.

  Any help please?

  Hello

  Where did you download the RAID driver?
  Please try to download the RAID driver on the Toshiba site directly. These drivers are pre-tested and should work on your laptop too.

  The older Portege M400 taken Windows 7 isn't supported so in the worst case, you can t use it.
  But normally the drivers should work on Vista so make sure you are using the correct driver.

• Portege M400: Installtion Windows - cannot install the RAID driver

  Hello world
  I installed my original form of the system DVD Toshiba (60 GB partition).
  So, I bought the second system with my notebook (Windows XP Pro OEM PL) and I want to install it on my second partition. When installing WinXP installer asked me about RAID driver on drive A: (I USB floppy drive, so it's no problem)... next step - partitioning - no problem. But when Windows starts to copy files (after select and format partition), ask again on RAID driver disk A: - and that is the problem, because my floppy drive is not present (maybe disable it windows after formatting the partition, I don't know)...
  There is also no results:
  -J' tried to install Windows on USB HDD, but there are blue screen after the first reboot,.
  -J' have tried to compile the RAID driver in driver.cab, this does not (or I did wrong).
  Someone has an idea how to install my second system? It is OEM, and I don't want to lose him.
  .. Sorry for my poor English :)...

  Hello

  After installing the driver RAID you should not make any partition or format the HARD drive.
  If you do this, the RAID driver is deleted and you will get an error.

  So do all the changes on the HARD disk before you install the RAID driver.

• Qosmio G30 - Question on the Raid driver

  Do I really need this driver to use RAID functions? If its set in BIOS, what makes the pilot actually do? outside you give health statistics?

  See you soon

  Yes, you need the RAID driver.
  I think that the Qosmio G30 has been designed with the RAID feature as some units of the G20.
  Without this RAID driver, you will not be able to install the OS because the OS Setup may not recognize the HARD drive.

  RAID uses two options:
  RAID 0 (Striping): two hard disks are used as a big drive, if a HARD disk fails all data is lost
  RAID-1 (Mirroring): hard drives contain the same data if a disk fails, data is not lost

  I think you could check this announcement and also use the advanced search to forum for more results on RAID.
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=14349&MessageID=52359

  In the user manual, you will also find lots of info on RAID

• Qosmio G30-145: WinXP and RAID driver - no response

  I did everything that is needed for the installation of windows xp for Qosmio G30-145.

  Installation process is as a result: as in http://support.toshiba-tro.de/kb0/TSB56012H0001R01.htm and that worked, but during the installation of windows has started, you will be asked once more (first time I did format and second time that I did ' t format HARD drive): "INSERT THE DISK LABELLED"TOSHIBA RAID DRIVER"in the A: drive... "Press on enter when ready '- but no reaction... SOLUTION!

  Thanks in advance.

  Hello

  According to the Toshiba page suggested when installing Windows using to partition or format the HARD drive, the RAID driver is deleted in the process. This causes the shot the next time that the machine start-up.
  To avoid this, perform a partitioning and formatting before you run the manual installation of Windows.
  This behavior is not displayed during the installation of Windows XP with SP2 integrated

  Well, perhaps, you need a CD OS Win SP2 integrated?

  But why you do not use the recovery CD Toshiba delivered?
  On this CD, all drivers are preinstalled and you only need to install the OS from the recovery CD. All should work properly.

  PS: Just for the record: in the BIOS, you should find an option to disable (or change) the RAID.

• Ethernet driver is missing

  I have a HP Pavilion p6533w desktop pc and the ethernet driver is missing after you have reinstalled the operating system Windows 7 and the HP websit does not list the model #, can any body help?

  Hello

  This happens to me every time I have to reinstall Windows 7. It seems to be a problem of resettlement on an other drunks. If please download the NIC from the following link and tell me if this solves the problem. Don't forget to save, unzip with 7zip or WinRAR to a folder on the desktop for ease and then point to it manually through the Device Manager, then reboot after installation just to make sure it fully takes effect.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063 & LC = on & CC = US & DLC = in & sw_lang = & Product = 4216289 #N467

• HD DVD - ROM driver is missing or corrupt on Satellite A200-s 23

  Hi, recently I bought my Toshiba Satellite A200-23 s and now it says that the HD DVD-ROM driver is missing or currupted. The system can not see DVD - ROM. My laptop is still under warranty, but perhaps I can fix it somehow? I found the list of drivers on this site but you've not seen DVD - ROM drivers.
  Thank you

  Don t think that it s a hardware problem.
  I think that it s a registry problem.

  Access the registry and delete the Upperfilters and Lowerfilters completely from the following registry key values:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  Reboot the laptop.

• Question about the V1.3.8.0 Raid driver update

  Hello.
  Can someone tell me what are the advantages of doing an update of the RAID Toshiba Windows XP MCE 1.3.8.0 driver or what case?

  Also had another problem... I tried to install the driver for interim relief and he made a mistake... my version of raid is always the one I had before and couldn t install this version.
  Any help would be cool.
  Thank you

  As far as I know the RAID driver must be installed at the begging of the installation of the OS.
  Unfortunately there is no any official documents about the correctional system and the benefits of updates.
  But I think that the new driver could be compatible with more motherboards and controller.

• How to install Windows Vista on the Qosmio G35-Av600 RAID driver?

  I have Windows Vista Home Preminm upgraded Pakage. When I start the installation process, the installation program ask Toshiba Raid Driver. So I click the button to load a driver and choose the folder where the driver is located, as mentioned on the guide, but said configuration there is no driver found for this player.

  What is the reason and what is the solution?

  Hello

  Have you chosen the right RAID driver?
  It seems that this laptop Qosmio was designed for the American market and therefore, you need to download the driver to the US page:

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/Su/su_sc_home.jsp

  It is specially designed RAID driver for Vista. At that time its version 1.10.0016 .
  Please note that you will need to extract this file prior to installing the RAID driver!

• Portege M400 - RAID driver for Windows 7

  I'm doing a clean install of Windows 7 64 bit on a Toshiba Portege M400.

  I have the computer with the boot CD in, by scanning my fongerprint, press a key to start from the CD, enter the country, click on install now, accept the license, select custom installation and get an empty listview, asking me where I want to install windows.

  I insert a memory stick with drivers from the download page of Tosh (selection of laptop |) Portege | Portege M series | Portege M400 (3G) | PPM41E | Windows XP Tablet Edition | RAID driver, which seems to accurately describe my machine), but the installer just give you the message: no signed device not found driver. Make sure that the installation media contains the correct drivers, and then click OK.

  Can someone point me in the right direction please?

  A.

  Hello!

  Drivers Windows XP don t work on Windows 7's the reason why you can t install Windows 7 successfully.

  You should try it with Vista driver again. The Vista drivers are also work on Windows 7. I think that's all you can do at the moment.

  Good luck! :)