RCF implementation issues

Similar Questions

• Site Recovery Manager 6 - implementation issues

  Hi all

  I'm kinda new on SRM and had a few questions that I could not find.  I hope you can help (thanks in advance)!

  1. is there an installation path recommended for vCenter (Embedded, external or external PSC) when SRM 6 deployment?

  2. If I go with the PSC external option, how to install the second site?  I tried to find articles and docs but no luck.

  Thanks again for all the help!

  Kind regards

  HB

  It is true that it does not support NFS 4.1, it supports NFS 3 (same version supported by vSphere)

• Faux columns - understanding and implementation issues

  Here is my site. Yet, it is not functional for clicking on links will do you no good. You can, if you really want, however:

  http://www.ladyhawkslair.com/index04.html

  The content of the page layout consists of

  A header (left, absolute position)

  mainContent (float right)

  mainNav (float left)

  (float left) sidebar

  footer (deleted: both)

  Wrapper (contains everything that and gives the stones of texture)

  I read a little about fake columns, but

  (1) I'm not entirely sure understand the concept. I'm really new to CSS.

  (2) I want to apply a fix to my current site and not do it again.  Because I'm new to CSS, it took me forever!

  The examples cited in the pages I read dealt with columns of the same length.  On my page, the 'essential' start at the top and several box bottom.  I could cheat and add more height to the sidebar and main content, but it will not look very good if someone uses a font size of 30 or something.  Also, my foot would get lost. (This would be sufficient if nothing else works?

  Here is my code: http://www.ladyhawkslair.com/code.txt

  If you can help me to patch my current design of the column, please explain it to me like I'm five years old.

  If I have to redo everything, I could put the header, the mainNav and the sidebar in a single column, since they have the same size.  In this case, always explain it to me like I'm five.

  Very kind of you, it is not really necessary... I just looked at your site, it's very pretty.  You did a nice job of aligning images.

  Good luck.

  Gary

• Is this Airport Extreme or cable provider?

  I have an IMAC (latest updates installed), an Airport Extreme (firmware updated this week) and use our local cable provider.  Suddenly lost all internet including wifi access.  Cable called - I was told it was an ipv4 vs ipv6 problem because of the Apple; has got the job of system - and then down the next day.  This happens every day; again picked up modem and installed.  Same question - every day, it works fine for a while, then the drops - no internet or wifi. must restart the modem and reset Airport. Apple called twice.  First call - no correction.  Called cable - a disconnect me the airport.  Internet worked all night.  Wait until tonight to see if it continues to operate.  I was told to work for 24 hours, the problem is the most convenient airport.

  Any comments?  Suggestions?

  Open Airport utility, select your Airport Extreme, sign in and then go to the Internet tab, click the Advanced Options button. Change the Configuration IPv6: link -local only. Update the Airport Extreme. Monitor your connection time to see if that solves your problem.

  You don't mention your ISP. Mine is Cox, and they seem to have their IPv6 implementation issues. Do the above stablizes my connection. If all goes well, it will also help you.

• WRT610N & ext HD via USB (for the use of NAS)-can not move files to the external

  Linksys WRT610N v1
  -Firmware Version: 1.00.03 B15 (updated about a month ago)

  Western Digital My Book Mirror Edition 2 TB model # WDH2U20000
  - http://www.wdc.com/en/products/products.asp?driveid=466
  -NTFS,
  -mapped with my M: drive, and
  -named WD 2 TB-MIRROR.

  HP laptop (Windows 7 Professional 32-bit)
  -normally wireless, but currently hard connected via Cat-5 Ethernet cable.
  -That is the only computer at home and I'm (of course) the admin ".»

  While I'm the 'computer' guy for family and friends, I turned in the novice because of this; I'm lost and feel beaten.  Please be as complete as possible with instructions/answers.  Guess I'm a noob.

  My plan is to use the WD external hard drive as a backup of my files and run the music/movies, etc out of it to my TV installation / audio salon through my Playstation3 or whatever.  My problem is simply to obtain the files copied to the external hard drive.  And being that this is a fairly simple HDD, I think that the issue could be with the USB (SIN) / configuration of the connection through the router.  That, or maybe there are authorization implementation issues.  I know that the HD has a setting for the mode 'sleep' - I did get to a point where I can adjust.  Anyway, I was able to get a record created but nothing to copy.  Then, I was (finally) able to delete the folder, etc..  I don't know if I'm missing some configuration/installation or if the scenario is just climbing.

  And for those of you who know software MioNet and/or WD Anywhere Backup provided with outside, I have installed the software on my computer laptop but has not been signed by all accounts and do not use them.  So I think that they are not a factor.  Just thought I would include this info just in case it is important.

  Here are several screenshots which can help you diagnose my problem:

  • Ext HD not found by Windows Explorer, even if you can 'see' it. He slept?
  • Ext HD "Properties".
  • Ext HD "Properties - Security.
  • Management Administration WRT610N
  • The shared folder of WRT610N
  • The WRT610N storage administration
  • Disk storage WRT610N

  On the router configuration page, rather than share the public folder, share the whole score. Once done, on the computer, map the drive and check.

• Payment option 'Free' web form that gives the error message

  Hello

  On this page http://www.sedonamagoretreat.org/volunteer-retreat-test-page , please see the form at the bottom of the page. The possibility to pay with a credit card works fine. But if I select 'Free' payment option and click the button send, I get the ERROR message: an error has occurred. Gift certificates are redeemable only through the online store.

  I built this form using some of these http://demo.businesscatalyst.com/booking-multiple-seats

  I followed the advice on this page http://forums.adobe.com/thread/1100196 by adding the gift button but still does not work.

  Thanks for your help!

  Linda

  I solved myself, with the help of technical support, so I'm writing this for anyone who attempts to do the same configuration.

  By technical support to Business Catalyst:

  "I checked the problem you reported, to confirm you with the same.

  You can use the free = 10 mode of payment for your basket, where any good good or discount reduced the amount to zero.

  I understand the option you're looking for, however, it is not possible to achieve the same in British Colombia, using the free payment method. Try a few adaptations, unfortunately, HTML / CSS / JavaScript and the location of related implementation issues beyond our support boundaries. However, you would like this post on our support forums, where a member of our helpful community may be able to help - http://forums.adobe.com/community/business_catalyst"

  So instead of using the payment option 'Free', I have used "Cash." It is not an ideal setup, but it works for now.

  Be sure to use

  wrapped around the fields related to payments and insert the following script to hide the payment fields if they choose payment by credit card:

• Implemented ICS update issues, Questions and advice (official)

  Welcome to the holders of Xoom under ICS colleagues,

  Please use this thread to report issues, ask questions, provide advice or other functional response. This thread isn't supposed to be a place to provide lists of wishes for future features or updates, but let us focus on getting the optimal performance of the ICS and reporting potential defects that need to be addressed. What is cream ice with pads? Share your tips or ask questions of other users ICS in this thread as well.

  If you declare a questions, please provide as much detail as you can, including:

  • What is the error or a symptom? What does your Xoom?
  
  
  
  • What applications are running on your tablet when this happens?
  
  
  
  • Have you tried to reboot or forced a Reset? What were the results?
  
  
  
  • This is a repetitive problem and if so, what are the steps (for others to try)?
  
  
  
  • The problem occurs in other places (especially if associated with connectivity)?
  
  
  
  • If this seems to be associated with app, have you tried another (competitor) Soft?
  
  
  
  • Is that what you found all work around the issue?
  
  

  The Xoom WiFi just launched upgrades, we will use this same thread for the upgrade of the 3G / 4G Xoom when he is available as well. As questions or gaps are found in this thread, we will be able to aggregate the details here for Google or Motorola to review.

  If you are reporting a problem or a question, consider following this thread for answers, suggestions or updates to follow-up.

  Thank you for your participation and contributions.

  -Doc

  
  

• Performance issues and options to reduce the loading with the Oracle text implementation

  Hi Experts,

  My database on Oracle 11.2.0.2 on Linux. We have Oracle implemented for the fuzzy search. Our oracle text indexes are defined as sync on commit that we cannot afford to have stale data.  Now our application done literally thousands of inserts/modifications/deletions of these columns where we have these Oracle text index defined. Thus, we see a significant impact on performance because the oracle text synchronization routines is called on each commit. We do nightly index optimization (optimization full every night at 3:00).  The text index oracle internal operations are appearing at the top of the sql page in our AWR report and fears it causes a lot of load on the DB.  Since we do optimization of the complete index once during the night, I think I should change that, and if I do, he's going to help us?

  For example, here are some data of AWR report my one day:

  Time elapsed (s)	Executions	Time by Exec (s)	% Total	% CPU	%IO	SQL ID	SQL module	SQL text
  27,386.25	305 441	0.09	16.50	15.82	9.98	ddr8uck5s5kp3		Start ctxsys.drvdml.com_sync_i...
  14,618.81	213 980	0.07	8.81	8.39	27.79	02yb6k216ntqf		begin ctxsys.syncrn (: idxownid,...)

  
  More top sql full text:

  ddr8uck5s5kp3	begin ctxsys.drvdml.com_sync_index (: idxname,: idxmem,: partname); end
  02yb6k216ntqf	begin ctxsys.syncrn (: idxownid,: idxoname,: idxid,: ixpid,: rtabnm,: flg); end;

  Now if I do optimization of the complete index that more often, and not only once night 15:00 will be this average, the load on DB sync on commit will decrease? If Yes, how many times should I optimized and the optimization itself does not lead to a load? Can anyone suggest?

  Thank you

  OrauserN

  It's to you which values you want to experiment.  Since 1 G, which is the same as 1024M is the maximum I could try that assigning to an index and see what effect it has.  You can use the same AWR report that you used previously and compare performance.  To determine when paging depends on your operating system and what tools you have.  Another option might be to use TRANSACTIONAL, that allows searching for unsynchronized lines and allow you to synchronize every five minutes, like Herald suggested, without any latency problem.  You can read about it here (scroll down to transaction):

  http://docs.Oracle.com/CD/E11882_01/text.112/e24436/csql.htm#CCREF23731

• The implementation of replication by the issue and do a read/write via DB as well

  Hello
  
  We have replication between two clusters that is configured as below
  
  < reading-writing-support-map-plan >
  < internal-cache-system >
  < local plan >
  < / local plan >
  < / internal-cache-system >
  < dumps-plan >
  schema < class >
  > class name < com.oracle.coherence.patterns.pushreplication.PublishingCacheStore < / class name >
  < init-params >
  < init-param >
  java.lang.String < param-type > < / param-type >
  {cache name} < param-value > < / param-value >
  < / init-param >
  < / init-params >
  < / class-system >
  
  < / dumps-plan >
  < / reading-writing-support-map-plan >
  
  We also have another editor who writes to DB (direct entry), the operation never set. This is achieved by adding
  
  xmlns:sync = "" Class: com.example.test.CustomPushReplicationNamespaceContentHandler ' in coherence - server.xml and "
  
  < sync: Editor >
  < sync: Publisher-name > clientele2-JDBC-editor < / sync: Publisher-name >
  < sync: Editor-system >
  < sync: custom-Publisher-plan >
  < / sync: custom-Publisher-plan >
  < / sync: Editor-system >
  < / sync: Editor >
  
  (follow this doc,howto_develop_a_custom_push_replication_publisher https://blogs.oracle.com/cosmintudor/entry/coherence_-)
  
  In this, we were able to run DB update every time that could happens (normal put or push replication put).
  
  We now want to know, how to read through?
  
  
  Note: we have not used CacheLoader interface to implement Write Through. We have extended AbstractPublisherScheme to implement through writing. There is no charge method in the AbstractPublisherScheme class to play through.

  Hello

  To reach it, you must implement your own cache-store "Store1" that extends PublishingCacheStore and implements BinaryEntryStore. In your configuration, use "Store1" as the cache-store and not PublishingCacheStore. In the implementation of the 'Bank' 1, call super.load()/super.store () in your methods of load/store if you want to push the retrieved entries in your load() method store() otherwise do not call super methods.

  I hope this helps!

  See you soon,.
  NJ

• Issue with the implementation of servers

  Hey guys I hope that one of you could help me out here.

  Now, I've set up a server for another office using the 5.1 esxi host, got the vm 3 load on the server itself and has been updated.

  Another person came and told me that I had to redo ALL about HER, because the IP address is saved in a database and all the screws to the top.

  Now I had set it up on DHCP and my plan was for everything to be set up, using DHCP then set the static when send us them.  They will be on a different subnet.

  Now I have something to worry about or it is true that we need to rebuild?

  If you need more info just get back to me and I'll give you more information

  With a stand-alone host (i.e. not connected to vCenter Server) which is in fact all what you need to do. I have used to create a DNS Host-A record for the ESXi host can resolve in name, which usually makes things easier.

  André

• Issues of implementation by default for PDF Reader and Acrobat is installed

  Hello

  I hope that it will be a pretty simple question to solve if there will be a solution or it be the case that Acrobat and Reader have this conflict and that is like that.

  I will describe my situation and what I am trying to accomplish the first.  I sometimes need to modify forms on PDF files so I need Acrobat installed.  I also need the ability to preview the PDF file in Windows Explorer (I don't have to wait and open Acrobat/Reader whenever I want to check a PDF of sense).  Unfortunately, for some reason, install Acrobat does not give me the preview function.  I need to install Reader for viewing work.  Well now, I need to print PDF forms but with the form fields * only *.  Unfortunately here again player does not have this feature.  I use Acrobat to do this.

  In summary, I need reader to see a preview of a PDF file in Explorer and Acrobat to change forms and print PDF files with the fields of the form only.  So, I use that drive for the preview function; It is never actually opened.  However, Reader takes upon himself to make the default program for PDF files, which means that I have to 'Open with' on every single PDF, I want to open and print.  Acrobat refuses to let be the default program.  If I try to change it to Acrobat, it simply returns to the player.  I have to be able to use Acrobat as a PDF Viewer by default as the player is installed.  I refuse to believe there is not at least a setting somewhere where I can register * force * windows only use the .exe in the Acrobat folder when I try to open a PDF file.  That's what I'll get for now this post gets visibility.

  Thanks for any help on this.

  I FIXED IT!  So first I tried to reinstall Acrobat 9 Pro.  Oddly, this broke the PDF preview.  The preview works through Reader, I didn't, but whatever.  Reinstalled Acrobat 9, has not changed the situation.  I've uninstalled reader XI and installed the X drive instead.  NOW it allows me to choose what I want to manage PDF files when I press this button in the general tab of preferences in Reader.  It was certainly a lot more under the hood than to change a program by default because it took a minute to finish.

  After you open a Times Reader X, preview began working again and now he recognizes my desire to use Acrobat to open a PDF file and works fine.  I don't know if it's a problem with the drive XI or a question seeks to use it and Acrobat 9, but they do not work well together.

• Implementation; Record/playback issues. Please answer

  Good so I'm here to try to configure Adobe Audition CS 5.5 and I met many problems here.

  For the record, I use a microphone condenser AKG Perception 220 USB with an Alesis io | 2 USB interface.

  Parameters of audio equipment.

  Device class: Ms (I have an ASIO option, but I'm not sure how to configure that, possibly a link to a guide would help.)

  Default input: Microphone (io | 2)

  By default output: speaker (2-Logitech USB Headset) of

  Master Clock: Out: speakers (2-Logitech USB Headset)

  Latency: 200ms

  Sample rate 48000

  Questions:

  -Then about when I record I get some sort of lag when I play. For example, if I have someone who does voices on a beat he will be off by a second, but it was recorded in time.

  -Lack of stereo imaging plugins? Had them before now they are gone?

  -Now when I go to check the track on that I record the song becomes very laggy and distorted; slow times and there are a lot of cracks on it.

  For the use of the driver ASIO these problems do need me an external output instead of my USB headset device?

  Sorry, I missed these two questions.

  Stereo imagery completely absent or all is simply greyed out?  If it's just grayed out, it could simply be that you are recording a mono track (because it's what a microphone).   Try to open any file real stereo to see if what he brings.  If the effects are completely absent, it is perhaps a different question and you may need to reinstall.

  The crackling and distortion could certainly be a result of having two different MS (the Alesis and headphones) devices running and, if so, put everything through the Alesis must repair.

• Preview color management issue - glued assigned Adobe RGB image

  I often web elements page layout in InDesign that my composition tool, then copy and paste in Photoshop as a smart object to then generate optimized web images. It's just easier to use photoshop. Problem, it is in the latest versions of Adobe have clogged the engine of anti-aliasing and now when rasterising a PDF file or paste a picture also as a chip oppose any portion of the image of this asset is smoother. You don't really notice that if the image of origin placed in InDesign is say double or more this resolution of the web version of final product, the scale hides the issue. But if they are closer to really see faceting full size occurs. Long story... anyway, I decided to study the implementation overview of Apple as a gateway for the rasterising instead of photoshop. He did a good job on glued assets resampling, but on this point saving and checking in Photoshop, I note that Preview assigned Adobe RGB profile to the processed image. Even if I opened the InDesign PDF and export as image in my size. My color workflow is sRGB. InDesign and Photoshop are two parameters in this way, the image placed in InDesign also has sRGB profile, the PDF has sRGB profile. If I copy / paste between InDesign and Photoshop, they are both aware glued Trump space and warn me if different from that of the target document. I have no idea where Preview becomes Adobe RGB, I don't see its place in the app to change that as a preference, and in any case, it seems very strange to be a defect when most of the people would not use them.

  In the preview, click on the tools bar menu point and scroll to the bottom of the drop-down list to assign the profile

  the next submenu you can click on and select sRGB at the bottom of this list. To save this profile to your image,

  do a "save under" (click on file, press the option/alt key Save As should appear). You can also test under the view menu bar item.

  

• Help on upgrading 10.7.5 El captain in MS Office and other possible issues

  Hello!

  I have a Mac Book Pro December 2011, OS X 10.7.5. I struggled with the implementation of php and many other issues and have been repeatedly invited to improve my OS. As a newbie in CS, I frankly scared - it's the only computer I have, and I can't lose/break/brick/etc, because I won't be able to fix any serious problem at the moment, not until I know what's best. But I'm really tired of losing time because of low productivity, constant freezing and other issues; and also feel ashamed bothers people on forums like this one, only because I have an obsolete system and lack of appropriate knowledge (the latest is not shameful because I learn, but the first can be really annoying for people who help me).

  Please, help me with this question:

  (1) is it safe to upgrade directly to el Captain 10.7.5?

  (2) If Yes on first, what are the possible problems that may arise and what should I do to avoid problems?

  (3) should I reinstall MS Office to upgrade the OS? This is crucial for me because I found out that I have to buy new MS Office, as Microsoft staff informed me. This isn't really the best money for me at the moment.

  Thank you very much for your help and your understanding!

  -First clone your boot existing to another disk drive.

  http://nyacomputing.com/how-to-create-a-bootable-clone-of-your-Mac-hard-drive/

  -Consult the developer of your applications if they will work with El Capitan.  Some may require updates and some may simply not work, and you must buy an upgrade. A MS Office for Mac license will be valid when upgrading to El Capitan, if the version you have is compatible with El Capitan.

  -In EL Capitan Apple strengthened for some hardware will require drivers drivers updated signature. For some hardware updated drivers are not available.

• When Thunderbird will implement OAuth 2.0?

  Just want to know when Thunderbird will implement OAuth 2.0.

  As a web authentication method and not a one mail, it may never happen. The use of Google caused a debate, but there are strong feelings that abuse of Google oauth should be ignored because it requires the implementation of the features of the browser in the browser no, applications issue security for applications.

  You can follow the discussion in bug 840540