RD350 and second processor

Similar Questions

• Ink advantage 1518: first and second impression is poor third better every time

  For a month, whenever I print a simple text, the first and second copies are of poor quality.  Black ink is faded up or down the page.  Sometimes the second copy is better, but the third copy is fine.  This happens again and again. I took the cartridge HP HP678 and shaken it, but the problem persists.  I lose a lot of paper.

  Any advice?

  Thanks, Stephen

  I'm not familiar with your printer model, but looking at the photos of the cartridges on eBay that looks like they are of the type that is a cartridge with a built-in print head.
  
  So the next time you need to print instead of print spend by the movements as you would replace a cartridge which, on most printers, I work with you would just open the top cover.
  
  Remove the black print cartridge and inspect the nozzles, they seem like they have a layer of ink dried on them, then pat dry the nozzles on a wet paper towel folded several thick layers. Blotteded several times after I insert the cartridge and try to print if you get good quality, this means that the head is dry or the wiper cleaning in the gas station is dirty and is wiping the ink dried on the head, clogging of the nozzles.
  
  Printheads in good condition will give you two solid black when erased ink lines. Or should I say on all the models that I worked and that's what the black print head made the color print head is a little different.
  
  If my post is a solution to your problem please click the accepted solution button under the post. You can also say thank you to a technician by clicking on the thumbs upwards the button under the post. You can even run amok and click on both buttons, .

• Windows Installer will not work. I have Norton Antivirus, CCleaner, Securia, etc.. Some programs start more. I have Office 2002 and my processor will not open.

  After problems with my system slows down, I found Windows Installer, stop operation. I have Windows XP Home Edition, SP3. I have Office 2002 and my processor will not open. I tried to install install 4.5, but it wouldn't work.  I can't start in my Services, either, even if it is configured to start automatically. I don't know if I just need to migrate to Windows 7 and do with it or continue to try to solve this problem!

  My hard drive is failing and replaced with the new computer.

• How to set the clock for the hours, minutes, and seconds with Windows XP

  How to set the clock for the hours, minutes, and seconds with Windows XP

  I don't know of your question.  If you ask how to show the clock in the tray system with hours, minutes and seconds, then download & run "Tclock Light".  Windows will not natively display the seconds.

  TClock Light: <> http://homepage1.nifty.com/kazubon/tclocklight/index.html >

  HTH,
  JW

• blue screen without interruption of the second processor

  After installing the update of definition for Windows Defender - KB915597 (definition 1.99.567.0) I started having a blue screen saying a clock interrupt was not received second processor. What should do?

  Hmm, yer this is true AM2 is quite obsolete. Although some motherboards can support AM3 with an update of the BIOS.

  Probably better to get AM3 if you want AMD. BUT you may also get different ram so

• is it possible that a single screen will work with the slider and second focus mode

  Hello

  can you please tell me is it possible that a single screen will work with cursor mode and second focus mode.

  Thank you

  Hello

  I don't think that it is possible to change the mode of the development of your application outside of in the config.xml file.

  A custom extension may be able to do this, but I have not seen anyone this yet.

• If I have the two LOV in the same table then how to connect when I select first and second LOV value also change?

  Mr President

  If I have the two LOV in the same table then how to connect when I select first and second LOV value also change?

  My two fields are FLOW AND DR_NAME

  FLOW = ACCT_ID

  DR_NAME = ACCT_NAME

  I created with success of LOV for these fields.

  First LOV gives acct_id in the debit field and second LOV gives the value of acct_name to dr_name.

  How can I report these lov, it's that when I change my acct_id then acct_name also change

  I have these two tables

  CREATE TABLE "NOM"  (
    "ACCT_ID" VARCHAR2(7) NOT NULL ENABLE, 
    "ACCT_NAME" VARCHAR2(50) NOT NULL ENABLE, 
    "O_BAL" NUMBER(13,2),
    CONSTRAINT NOM_PK PRIMARY KEY ("ACCT_ID")ENABLE
     
     );
  CREATE TABLE "VOUCHERDET" (
    "V_ID" VARCHAR2(9) NOT NULL ENABLE,
    "LINEITEM" NUMBER ,
    "DEBIT" VARCHAR2(7) , 
    "DR_NAME" VARCHAR2(50), 
    "CREDIT" VARCHAR2(7) , 
    "CR_NAME" VARCHAR2(50), 
    "PARTICULARS" VARCHAR2(100), 
    "AMOUNT" NUMBER(21,2),
  CONSTRAINT VOUCHERDET_PK PRIMARY KEY ("V_ID","LINEITEM")ENABLE, 
  CONSTRAINT PUR_SAL_LINE_POD_FK FOREIGN KEY(PROD_ID)
    REFERENCES PRODUCTS (PROD_ID)ENABLE,  
  CONSTRAINT VOUCHERDET_DEBIT_FK FOREIGN KEY ("DEBIT")
     REFERENCES "NOM" ("ACCT_ID") ENABLE, 
  CONSTRAINT VOUCHERDET_CREDIT_FK FOREIGN KEY ("CREDIT")
     REFERENCES "NOM" ("ACCT_ID") ENABLE,  
  CONSTRAINT VOUCHERDET_V_FK FOREIGN KEY ("V_ID")
     REFERENCES "VOUCHER" ("V_ID") ON DELETE CASCADE ENABLE
    );
  
  

  Concerning

  so, instead of this second ActId, choose ACCT_NAME:

  

• I create a form based on two tables that have sequences also. When I create insert only row is inserted in the fields in table first and second fields of the table are empty. Why?

  Mr President.

  I create a form based on two tables that have sequences also. When I create insert only row is inserted in the fields in table first and second fields of the table are empty. Why?

  

  the page source is

  <?xml version='1.0' encoding='UTF-8'?>
  <ui:composition xmlns:ui="http://java.sun.com/jsf/facelets" xmlns:af="http://xmlns.oracle.com/adf/faces/rich"
                  xmlns:f="http://java.sun.com/jsf/core">
    <af:panelFormLayout id="pfl1">
      <af:group id="Group">
        <af:inputText value="#{bindings.VoucherId.inputValue}" label="#{bindings.VoucherId.hints.label}"
                      required="#{bindings.VoucherId.hints.mandatory}" columns="#{bindings.VoucherId.hints.displayWidth}"
                      maximumLength="#{bindings.VoucherId.hints.precision}"
                      shortDesc="#{bindings.VoucherId.hints.tooltip}" id="it1">
          <f:validator binding="#{bindings.VoucherId.validator}"/>
          <af:convertNumber groupingUsed="false" pattern="#{bindings.VoucherId.format}"/>
        </af:inputText>
        <af:inputDate value="#{bindings.VoucherDate.inputValue}" label="#{bindings.VoucherDate.hints.label}"
                      required="#{bindings.VoucherDate.hints.mandatory}"
                      columns="#{bindings.VoucherDate.hints.displayWidth}"
                      shortDesc="#{bindings.VoucherDate.hints.tooltip}" id="id1">
          <f:validator binding="#{bindings.VoucherDate.validator}"/>
          <af:convertDateTime pattern="#{bindings.VoucherDate.format}"/>
        </af:inputDate>
        <af:inputText value="#{bindings.Credit.inputValue}" label="#{bindings.Credit.hints.label}"
                      required="#{bindings.Credit.hints.mandatory}" columns="#{bindings.Credit.hints.displayWidth}"
                      maximumLength="#{bindings.Credit.hints.precision}" shortDesc="#{bindings.Credit.hints.tooltip}"
                      id="it2">
          <f:validator binding="#{bindings.Credit.validator}"/>
        </af:inputText>
      </af:group>
      <af:group id="g1">
        <af:inputText value="#{bindings.Lineitem.inputValue}" label="#{bindings.Lineitem.hints.label}"
                      required="#{bindings.Lineitem.hints.mandatory}" columns="#{bindings.Lineitem.hints.displayWidth}"
                      maximumLength="#{bindings.Lineitem.hints.precision}" shortDesc="#{bindings.Lineitem.hints.tooltip}"
                      id="it3">
          <f:validator binding="#{bindings.Lineitem.validator}"/>
          <af:convertNumber groupingUsed="false" pattern="#{bindings.Lineitem.format}"/>
        </af:inputText>
        <af:inputText value="#{bindings.VoucherId1.inputValue}" label="#{bindings.VoucherId1.hints.label}"
                      required="#{bindings.VoucherId1.hints.mandatory}"
                      columns="#{bindings.VoucherId1.hints.displayWidth}"
                      maximumLength="#{bindings.VoucherId1.hints.precision}"
                      shortDesc="#{bindings.VoucherId1.hints.tooltip}" id="it4">
          <f:validator binding="#{bindings.VoucherId1.validator}"/>
          <af:convertNumber groupingUsed="false" pattern="#{bindings.VoucherId1.format}"/>
        </af:inputText>
        <af:inputText value="#{bindings.Debit.inputValue}" label="#{bindings.Debit.hints.label}"
                      required="#{bindings.Debit.hints.mandatory}" columns="#{bindings.Debit.hints.displayWidth}"
                      maximumLength="#{bindings.Debit.hints.precision}" shortDesc="#{bindings.Debit.hints.tooltip}"
                      id="it5">
          <f:validator binding="#{bindings.Debit.validator}"/>
        </af:inputText>
        <af:inputText value="#{bindings.Credit1.inputValue}" label="#{bindings.Credit1.hints.label}"
                      required="#{bindings.Credit1.hints.mandatory}" columns="#{bindings.Credit1.hints.displayWidth}"
                      maximumLength="#{bindings.Credit1.hints.precision}" shortDesc="#{bindings.Credit1.hints.tooltip}"
                      id="it6">
          <f:validator binding="#{bindings.Credit1.validator}"/>
        </af:inputText>
        <af:inputText value="#{bindings.Particulars.inputValue}" label="#{bindings.Particulars.hints.label}"
                      required="#{bindings.Particulars.hints.mandatory}"
                      columns="#{bindings.Particulars.hints.displayWidth}"
                      maximumLength="#{bindings.Particulars.hints.precision}"
                      shortDesc="#{bindings.Particulars.hints.tooltip}" id="it7">
          <f:validator binding="#{bindings.Particulars.validator}"/>
        </af:inputText>
        <af:inputText value="#{bindings.Amount.inputValue}" label="#{bindings.Amount.hints.label}"
                      required="#{bindings.Amount.hints.mandatory}" columns="#{bindings.Amount.hints.displayWidth}"
                      maximumLength="#{bindings.Amount.hints.precision}" shortDesc="#{bindings.Amount.hints.tooltip}"
                      id="it8">
          <f:validator binding="#{bindings.Amount.validator}"/>
          <af:convertNumber groupingUsed="false" pattern="#{bindings.Amount.format}"/>
        </af:inputText>
      </af:group>
      <f:facet name="footer">
        <af:button text="Submit" id="b1"/>
        <af:button actionListener="#{bindings.CreateInsert.execute}" text="CreateInsert"
                   disabled="#{!bindings.CreateInsert.enabled}" id="b2"/>     
        <af:button actionListener="#{bindings.Commit.execute}" text="Commit" disabled="#{!bindings.Commit.enabled}"
                   id="b3"/>
        <af:button actionListener="#{bindings.Rollback.execute}" text="Rollback" disabled="#{!bindings.Rollback.enabled}"
                   immediate="true" id="b4">
          <af:resetActionListener/>
        </af:button>
      </f:facet>
    </af:panelFormLayout>
  </ui:composition>
  
  
  
  

  Concerning

  Go to your VO Wizard, select the tab of the entity and to check if both the EO is editable or not.

  See you soon

  AJ

• How to add days, hours, minutes and seconds to a date?

  Hello
  
  I have the following problem.
  Saw 4 integers D, H, M, and S (each of them can be negative) and a date Da, I want to add days D, H hours, M minutes and seconds of S date Da.
  For example, if

  Da= to_date('28/06/2011 14:50:35','dd/mm/yyyy HH24:mi:ss'), and D = 3, H = -2, M = 20 and S = -12, 

  This means that I want to add 3 days, -2 hours, 20 minutes and -12 seconds to the date Da, and the new date must be in the following date:

  to_date('01/07/2011 13:10:23','dd/mm/yyyy HH24:mi:ss') 

  Is it possible to write a query for this problem or should I use PL/SQL?
  
  Thank you.

  There is no need of PL/SQL

  SQL> alter session set nls_date_format = 'DD/MM/YYYY HH24:MI:SS';
  
  Session altered.
  
  SQL> var d number
  SQL> var h number
  SQL> var m number
  SQL> var s number
  SQL> exec :d := 3; :h := -2; :m := 20; :s := -12
  
  PL/SQL procedure successfully completed.
  
  SQL> select to_date('28/06/2011 14:50:35','dd/mm/yyyy HH24:mi:ss')
    2     + :d
    3     + (:h / 24)
    4     + (:m / 24 / 60)
    5     + (:s / 24 / 60 / 60)
    6  from dual;
  
  TO_DATE('28/06/2011
  -------------------
  01/07/2011 13:10:23
  

• BET MAX and second MAX AMOUNT

  Hello world
  
  in the EMP table.
  
  I want to get the MAX and second MAX Salary for the 30 and total Department at line 10 in a Department.
  
  Like this
  
  Salary eleve---deuxieme better pay - total dept 10
  2850 1600-8750
  
  
  Kind regards

  Mahir M. Quluzade wrote:

  select
  deptno, maxs "Higher Salary", max(sal) "Second higher Salary",sums "total dept"
  from
  (
  
  select
  deptno,sal,
  max(sal) over(partition by deptno) maxs,
  sum(sal) over (partition by deptno) sums
  
  from scott.emp
  WHERE deptno =10)
  where sal != maxs
  group by deptno, maxs, sums
  

  UH... they wanted the highest and 2nd highest of deptno = 30, so it should not be something like this...

  WITH t_sal AS
  (
   SELECT deptno,
          sal,
          ROW_NUMBER() OVER(PARTITION BY deptno ORDER BY sal DESC) rn,
          SUM(sal)     OVER(PARTITION BY deptno ORDER BY deptno) tot
   FROM   emp
  ),   t_data AS
  (
   SELECT deptno,
          sal,
          rn,
          tot
   FROM   t_sal
   WHERE  (rn IN (1,2)
   AND    deptno = 30)
   OR     (rn = 1
   AND    deptno = 10)
  )
  SELECT MAX(CASE WHEN deptno = 30 AND rn = 1 THEN sal ELSE NULL END) higher,
         MAX(CASE WHEN deptno = 30 AND rn = 2 THEN sal ELSE NULL END) second_higher,
         MAX(CASE WHEN deptno = 10 AND rn = 1 THEN tot ELSE NULL END) total_for_10
  FROM   t_data;
  

  ?

  Published by: Munky on February 23, 2011 13:40 - typo

• How to get higher and second higher value of a line?

  Hello world
  
  I want more solid and second upper sal from emp in a line,
  
  Thank you

  Hello

  Whenever you have a problem, after the results you want.
  Always tell what version of Oracle you are using.

  Are you looking for this?

  HIGHEST_SAL SECOND_HIGHEST_SAL
  ----------- ------------------
         5000               3000
  

  If so, follow these steps:

  WITH     got_r_num     AS
  (
       SELECT     sal
       ,     ROW_NUMBER () OVER (ORDER BY sal DESC)     AS r_num
       FROM     scott.emp
  )
  SELECT     MAX (CASE WHEN r_num = 1 THEN sal END)     AS highest_sal
  ,     MAX (CASE WHEN r_num = 2 THEN sal END)     AS second_highest_sal
  FROM     got_r_num
  ;
  

  It works in Oracle 9 (and), but can easily be adapted for Oracle 8.1.
  From Oracle 11, you can also use SELECT... PIVOT.

  It is unclear how you want to handle links. Say there were only 3 rows, with 100, 200 and 200 sals. What do you consider being the second highest?

• HP Dv6-7029 new notherboard and new processor still does not?

  First Ihad a noisy, then computer fan noise stopped 3 times after being on for a few seconds.
  Fan has been cleaned, then flashing light CAP lock.  I have replaced the motherboard, replaced the processor, fan works and I still don't have the blinnking cap light locks.  I just give my computer to my computer guy because he does not know what what the hell it hurt.  ALL the IDEAS that were not covered to a repair? Oh also, we checked the memory and which was very good.

  The only other thing I can think about is perhaps is the power cable from the CA Jack to the motherboard. You who reused right?

• iMac 27 "5 k and second monitor

  Hi guys, I just bought iMac 27 "i5 3.3 with radeon M395 2 GB 5K, I would like to know if I can connect my monitor LCD Philips that runs at 1920 x 1080 as a second monitor 27" and if so, what cable connection should use.

  Thank you very much in advance.

  The iMac can power two external monitors, I have an imac 27 "non-retine with an external LG.

  As for cable, it depends on outings has the Philips, it can be one of the following values: VGA, DVI - D or HDMI or any combination of these. So you would need an adapter that goes from first sight to one of the foregoing. The third option as it is not not a digital connection but analog VGA.

  https://www.Amazon.co.UK/s/ref=nb_sb_noss_2?URL=search-alias%3Daps & s Field-Keyword = crush + to + dvi

  https://www.Amazon.co.UK/s/ref=nb_sb_noss_1?URL=search-alias%3Daps & s Field-Keyword = crush + to + hdmi & HR = i % 3Aaps % 2% 3Athunderbolt + to + hdmi

  https://www.Amazon.co.UK/s/ref=nb_sb_noss_2?URL=search-alias%3Daps & s Field-Keyword = crush + in + vga & HR = i % 3Aaps 2% 3Ath %...

• HP Pavilion g4: Mr President, I want to know if I can change my graphics card on my HP Pavilion g4 and which processor can I get

  Mr President.

  I want to know that can I change my graphics card on my laptop without changing the processor, and if I can't more the processor will be good for me to buy for high game and also please tell me what is the limit of ram on my laptop.

  I thank for your time, Mr. President, wish you good day.

  Hi Bro,

  Could you please help me with the serial number and the product number of the unit so that I could do my best to help out you.

  I am an employee of HP

  Please click on 'Accept as Solution' on the post that solves your problem to help others find a solution even.
  Click the 'Thumbs Up' to say 'Thank you' for helping!

• "Primary display" and "Second view" reversed

  Second display problem: I use my TV as a second monitor via HDMI.  However, FCPX uses my computer as the second screen and TV as the main window.

  Is there a way to remedy this situation?

  End 2012 13 "MacBook Pro retina

  Final Cut Pro 10.2.3

  Yes.

  By dragging the application window to the screen of your MacBook Pro and making window-> show viewers on the second screen should be all you need.

  Are you saying that when you do FCP X switches the main window to the TV? I've not seen it happen, but fear not, that even in this case, there is a solution!

  Open System-> display preferences and click Arrangement. Then drag the representation of small bar menu to the internal display. Then he will designate your internal display as screen "main".