RDP on HTML5 / local keyboard

Similar Questions

• I want that my users who log on to the virtual remote desktop to use the one I put in this image and not their local keyboard

  Original title: the remote keyboard language

  Hello

  I connect to a remote virtual desktop. My local computer uses a different keyboard language than the remote.

  I want that my users who connect to the virtual remote control to use the one I have set myself in this picture and not their local since keyboard only supports us that we provide in the virtual, not on their local machine.

  I've tried the "Reg" IgnoreRemoteKeyboardLayout key, but I've been the opposite. Who closes?

  Is their a way to force the RDP to use the remote keyboard and not local?

  Thank you

  Hello

  Thanks for posting your query in Microsoft Community.

  I understand you have questions using the remote keyboard on the Windows computer. So, please follow the link below to post your query in the Technet forums, because they have more expertise on this issue.

  TechNet forums

  http://social.technet.Microsoft.com/forums/Windows/en-us/home?Forum=w7itpronetworking

  I hope this helps.

  Thank you

• Is there a way to allow users to disconnect their sessions on a remote server to the RDP from their local machine?

  QWINSTA and other command line utilities are a bit too complicated for the end users, we of course do not disconnect the session hurt accidentally. In general, we only questions with sessions stuck to a few users who would be perfect if utilities command-line integrated for rdp sessions would allow to change username, but since they require a dynamic session id # I don't know how this could be scripted. Is there a tool available for Windows 7 clients on a Server 2008 RDP allowing them to disconnect from their own session if they are blocked? We have enrolled in different time zones who have to connect remotely in order to do their job and sometimes it is too early here for someone to be there to help.

  I found a http://www.ctrl-alt-del.com.au/ , but it says it is only for Server 2003 and I tried and got an error flashed too quickly to be read.

  Thanks for your time.

  Hello

  Welcome to the Microsoft community.

  I would recommend you to view the query on the TechNet Forum which, I am sure, will help you better.

  You can check the link to the request message.

  http://social.technet.Microsoft.com/forums/en-us/category/w7itpro

  Click on a question and post your question.

  Please write us if you have any further questions.

• How to start a local HTML5 file automatically as a link?

  Hi, I started to learn the DPS two weeks ago and had a lot of fun. But yesterday, I had a problem how to start a weblink autmaticially. The checkbox in the control panel overlay creator to enable auto-start does not clicking on it. And the default is inactive. The other boxes in the Panel do not react too. This problem would be an InDesign bug? Basically, what I tried to do... .i inserted a HTML5 local file as an weblinki l is shown on my iPad after synchronization. But I have to tap on it to show the HTML content - but I want to start automatically.

  Thanks for your comments. I hope you, someone could help me.
  Bert Bye

  Something is wrong with your Setup. Try removing the InDesign preferences. If this does not work, try to uninstall and reinstall the tools DPS.

• Keyboard yoga 900 arise does not in Tablet Mode

  I've had settings and devices and clicked on the box I was supposed to click on.

  In TABLET mode, when I touch the Google to enter text inside bar, the keyboard does not appear, so I have to manually launch the keyboard then when I finished I have to manually close the keyboard because there is no button 'DONE' or 'GO' or 'ENTER' on the keyboard in tablet mode.

  Thank you for your suggestions.

  I'm afraid that the resolution of this problem lies with Google. The Chrome browser does not trigger local keyboard in tablet mode. It is a desktop application that does not use the API of Windows 10 news for this feature. Personally, I doubt that Google will rush to remedy this.

  As you have discovered, Microsoft Edge brings up the local keyboard in tablet mode. IE11 goes.

• am not able to use the keyboard Finns characters.how special use these special characters

  We bought a new acer laptop

  specifications of the laptop are as mentioned below >

  ACER ASPIRE S3 13.3 INCHES

   

  We are not able to understand how to enter some special characters using the key board, some characters are shown below

  a o a

   

  Could you please inform us about how this particular buttons might be enabled.

  Two methods:

  1. use the character map to select the character and copy/paste in your application

  2. change local/keyboard control/regions and languages/change keyboard that some keys are mapped to your special characters

  For more information, Google keywords above.

• LogMeIn Hamachi and RDP Windows XP Firewall problem

  I use Logmein Hamachi VPN over the internet to a PC running Windows XP.
   
  I am able to use RDP to access, but only if I turn off the Windows Firewall.
   
  I tried to access Hacmachi in the exceptions, but I'm still doing work if I turn on the firewall.
   
  I can use RDP over the Local network with the firewall, but not on the Hamachi network.
   
  I would like to be able to find a way to configure the Windows Firewall to be on and enable RDP by Logmein Hamachi VPN access.

  Hi Mr cheese,

  Since he works locally the problem may be with the VPN program I would suggest that you contact logmein support using the link below.

  https://secure.LogMeIn.com/contactus/

• Disable the pop up keyboard W7 64 bit

  original title: TURN OFF POP-UP KEYBOARD W7 64 BIT

  Hi all

  After HAVING TECH SUPPORT HP WITH TALK (OFF SHORE), they were unable to find a way to turn off display screen keyboard

  on a HP Touchsmart AIO computer.  I use this terminal for a Point of sale register and any time that I have access to a field where the data is required on keyboard screen appears.  I don't want that we have our own keyboard touchscreen or use the external keyboard.  The weard is that he live with my mouse pointer too, so am hoping there is a way to disable just the local keyboard...

  He is a professional system of W7 64-bit with all updates.

  Any help would be appreciated of course

  Click Start-> Control Panel-> ease of access.  Scroll up to where it says use computer without mouse or keyboard and click on it.  Uncheck the box that says use Visual keyboard and click OK.

  Good luck.

• Keyboard shortcuts with APPCC 2015

  Well, it was fun. Just go to Premiere Pro 2015 and all my carefully worked keyboard shortcuts and windows have been replaced. Perfect. Tried to sync the settings with the cloud and nothing. By default, that's all.

  Am I missing something, or am I just boned? Before 2015 I had saved all my shortcuts locally, but PP2015 is not find my custom keyboard. Anyone else running into this?

  Well, thank the sweet baby Jesus. I could find my file stored locally keyboard settings (.kys) from Premiere Pro 2014 and it copied to the appropriate in Premiere Pro 2015 folder. Restarted PP and Marion, I have my shortcuts.

  Wouldn't be nice if Adobe this automated process for you during the switch? You bet. But nothing in this world isn't that simple, is it?

  Here's the cheat sheet for anyone who runs into the same problem.

  (1) find your old keyboard shortcut file. For Mac (sorry PC users, I have no idea): Documents > Adobe > Premiere Pro > 8.0 (the number may be different according to install it first how did you) > profile-CreativeCloud > Mac > YOUR KEYBOARD LAYOUT FILE

  (2) duplicate this file

  (3) move this new duplicate of Documents > Adobe > Premiere Pro > 9.0 (or as many as you have here) > profile-CreativeCloud > Mac

  (4) restart Premiere Pro.

  (5) select Premiere Pro > keyboard shortcuts

  (6) in the dropdown at the top of the keyboard, you should find the keyboard settings file, that you just moved

  (7) rock and Roll

  Hope it will be useful to anyone who runs into the same problem.

• Why html5 could play video h.264 on ios, but flash could not?

  It seems that html5 local video player using play video, flash could do?

  With a Flash app you can play H.264 using the native player, either by making a navigateToURL() (which could open the video in the native player and get back to you when it's over) or you can use a StageWebView to read the HTML code that contains H.264 video. The StageWebView don't need not fill the entire screen, he could sit next to some normal Flash elements.

• This will remove all your custom settings and the settings of many extensions.

  Hello

  I was reading this article of knowledge and he says:
  "This will delete all your custom settings and many extensions settings."
  What are the custom settings?

  for example one of these and what else
  bookmarks?
  Add - ons?
  Top toolbar - Customize the toolbar
  Add on the toolbar
  Firefox/preferences
  Authorization Manager settings
  the new page open

  Corrupted preference file
  File preferences may be corrupt, Firefox prevents writing to it. If you delete this file, Firefox will automatically create another when it comes to.

  Here's how to delete the prefs.js file.

  This will remove all your custom settings and the settings of many extensions.
  Open your profile folder:

  In the menu bar, click the Help menu and select troubleshooting information. The troubleshooting information tab will open.

  In the section the Application databases, click view in the Finder. It will open a window with the folder of your profile.
  Note: If you are unable to open or use Firefox, follow the instructions for finding your profile without having to open Firefox.

  In the menu bar, click Firefox and select Quit Firefox

  Locate the prefs.js file (and, if applicable, the prefs.js.moztmp file).
  Delete these files and files prefs - n.js where n is a number (e.g. prefs - 2.js).
  If there is, remove the Invalidprefs.js.
  Restart Firefox. You should now have reset all preferences.

  Based on information from preferences not saved (mozillaZine KB)

  See also http://kb.mozillazine.org/Profile_folder_-_Firefox

  #1: there are too many pref for all kinds of adjustment which will offer a recipe of what you lose and how to keep certain parameters.
  It is possible to copy specific lines of a prefs.js to this file in another profile or restore some settings after deleting this file in the current profile folder.

  All the prefs that show as a user defined and appear in bold on the topic: config page are stored in the prefs.js file.
  
  This includes the changes you make and data Firefox itself and extensions store as data/parameters in a pref.
  It's

  #2,3: the localstore.rdf file stores the toolbar configuration and other data.

  #4: the current versions of Firefox shows the menu entry "Tabs" at the top menu ' display > toolbars "and" Firefox > Options ' and in the menus toolbar pop-up if the tabs are not in the default position on the top.
  
  If the notches located on the top and the menu entry is not available and you want to move the tabs under the navigation toolbar, then you have to toggle the pref browser.tabs.onTop false on the subject: config page.
  
  A restart of Firefox is necessary for updating the menu entry to display or remove.

  Note that this pref will no longer effect when the code Australis lands on the output channel (code Australis will probably land in Firefox 29).

  #5: see https://support.mozilla.org/kb/Clear+Recent+History

  Compensation of the "Site Preferences" clears all exceptions for cookies, images, pop-ups, installing the software, stored passwords in permissions.sqlite and other site specific data stored in content - prefs.sqlite (including zoom on the page).

  Deletion of cookies will delete all specified (selected) cookies, including cookies with an exception allowing you want to keep.

  #6,7: history of search bar is the story of the search bar (Google) on the Navigation toolbar.
  
  All recorded data to a form on a web page is included in the data in the form, but you can not separate and distinguish the two.
  
  Browsing history is the history of the web pages you have visited.

  • Form history control: https://addons.mozilla.org/firefox/addon/form-history-control/
  • Tahoe Data Manager: https://addons.mozilla.org/firefox/addon/data-manager/

  #8: session cookies are always kept in memory and never stored on the disc in cookies.sqlite
  
  You can only delete specific cookies manually in the Cookie Manager or leave cookies expire when you close Firefox to make them behave like session cookies.
  
  Cookies of other compensation will include all cookies and don't obey the exceptions that you have made.

  #9
  Data stored in storage DOM is not stored in cookies.sqlite, but it is generally stored in the webappsstore.sqlite file or possibly in the form of data in IndexedDB.

  • https://developer.Mozilla.org/en-us/docs/Web/Guide/API/DOM/Storage
  • https://developer.Mozilla.org/en-us/docs/IndexedDB
  • https://addons.Mozilla.org/en-us/Firefox/addon/Foundstone-HTML5-local-storage/

• Cannot convert llb in directory

  I have a local keyboard llb someone shared. When I open it, convert it to button directory is disabled, as are the buttons cut and copy. I need to extract it.

  Why would he do that?

  Thank you

  Jim

  In the llb Manager, set up a folder, and then select the llb file. Now you can convert it into a folder.

• Printer redirection does not work in vWorkspace 8.0

  Hi all

  I am facing problem of printer redirection in Windows 2003 TS.

  When I try to connect via RDP, then the local computer printer redirection works very well.

  But when I connect Server Terminal Server via url web vworkspace then the printer is not redirection. It does not show in the printer and the camera.

  Pease help me solve this problem.

  We use vWorkspace 8.0 and windows server 2003 as a Terminal server server.

  Thank you

  Jean Claude

  Redirect has not been activated.

• AnyConnect profile settings mandatea single user

  I have an ASA 5505 running 8.2 (2) and I AnyConnect established and working until last night.  We get an error,

  "Settings profile AnyConnect mandate a single local user, but several users them are currently connected to your computer.  A VPN connection can be established. »

  Please help I don't know what that means.

  Thank you

  Ken

  This means that you have several logons on your local computer that is not allowed when you try to connect with AnyConnect. You have RDP access and local access at the same time, and if you have, AnyConnect won't be able to connect.

  Here is the documentation for your reference:

  http://www.Cisco.com/en/us/docs/security/vpn_client/AnyConnect/anyconnect23/release/notes/anyconnect23rn.html#wp908545

• ACS 5.3 Migration utility failures

  "I am trying to run the migration utility to export GBA 4.2.0 (124) to ACS 5.3 device and get him."

  Fatal error! -Unable to connect to ACS 4.x DB! ' error when I run the utility on the migration machine.  The migration machine has ACS 4.2.0 (124) installed and a Windows 2008 Standard Server SP1 works as a virtual machine.  I connect to the server with VNC (* no * RDP) with a locally defined administrator account.  I get these errors in migration.log when I run the utility and try to make a function ' analyze and export:

  26/07/2012-13:36:55 WARN JavaUtils.isAttachmentSupported(JavaUtils.java:1308) - could not find the required classes (javax.activation.DataHandler and javax.mail.internet.MimeMultipart). Attachment support is disabled.

  26/07/2012-13:37:14 ACS4Connector.checkDBConnectivity (ACS4Connector.java:137) FATAL - Fatal Error! -Unable to connect to ACS 4.x DB!

  java.sql.SQLException: [Microsoft] [ODBC Driver Manager] Data source name not found and no default driver specified

  at ianywhere.ml.jdbcodbc.IDriver.makeODBCConnection (Native Method)

  at ianywhere.ml.jdbcodbc.IDriver.connect(IDriver.java:354)

  at java.sql.DriverManager.getConnection (unknown Source)

  at java.sql.DriverManager.getConnection (unknown Source)

  at com.cisco.nm.acs.mgmt.migration.ACS4Connector.getConnecter(ACS4Connector.java:66)

  at com.cisco.nm.acs.mgmt.migration.ACS4Connector.checkDBConnectivity(ACS4Connector.java:133)

  at com.cisco.nm.acs.mgmt.migration.MigrationApplicationCLI.runExport(MigrationApplicationCLI.java:605)

  at com.cisco.nm.acs.mgmt.migration.MigrationApplicationCLI.main(MigrationApplicationCLI.java:266)

  Any ideas?

  I have seen that it works with 2003 32-bit.