Re: Data recovery and choice removal

Similar Questions

• This allows backup, data recovery and AntiVirus Server

  Hello

  Am new to the CWC and I wanted to know if there is an option in the CWC to enable backup, Server data recovery and install Antivirus for commissioning a virtual machine of the CWC. It would really help if someone could share some links for the same or any document available to her.

  Thank you

  Anish

  Anish, don't know if this is related to your original question, but if I understand correctly, you want to know how to configure which models are available for users to order. This first through these images through CloudSync automated discovery. Then, the supplier (CPTA) uses the portlet to manage an Infrastructure of Cloud Computing for review 'Discovered' templates/images and mark them as "Registered" or "ignore". Only "Registered" models can be selected when ordering a virtual machine. "Registered" items can be removed temporarily from the selection by putting in "Maintenance" mode

• taken over by "data recovery file. cannot remove

  I was ibvaded by a program? calls the data recovery. He wants 87,50 USD to fix my problem. (WHAT PROBLEM? OTHER THAN THEIR INVASION?) Now I have wrnings as "sector of disk not found". I tried the system restore, but no luck.

  Hello

  (1) have there been recent changes to the computer before the show?

  I suggest you analyze your computer Microsoft Safety Scanner, it will help us to get rid of viruses, spyware and other malicious software.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Hope this information is useful.

• VM VMware Data Recovery and save after pRDM vdisks

  Hello

  We will use VMware Data Recovery. A virtual machine will be some vdisks that will be mapped and pRDM. I know that vSphere can't save pRDM. What I would like to know is if VM with pRDM can be saved by the device of data recovery.

  So, can I add VM who pRDM unit of data recovery. Vdisks (and associated data) that are no pRDM don't rely on VMware Data Recovery?

  Thank you!

  Hello.

  See KB 1015488.

  Good luck!

• Warning of VMware data recovery and remote monitoring

  Hi all

  Anyone know if it is possible to monitor the warnin and messages of alarm vmware data recovery?

  For example "integrity check" fails, or "the incomplete backup job.

  I didn t find something about this in the user guide.

  MFG

  Andreas

  It's a shame, but there is no way to configure VDR (1.0.2) to send alarms.

  You might want to script that runs on the device (grep for "failed" so something like that).

  Kind regards

  LAR

• VmWare data recovery and work with independent labels

  I read on a forum: If you want to drive the snapshot of the virtual machine is not affected, in its properties, select the "independent". Moreover, if the virtual computer is 'Independent' disks, the snapshot cannot be included in his memory.

  There was a question if the readers to all virtual machines 'Independent', would work "VmWare Data recovery?

  I'm not sure about my discoveries. SO please don't take this as a solution to your problem. My conclusions are:

  When you start to take a vDR of backing up a virtual computer that is configured with an independent record, it will not be successful. As vDR is used to take a snapshot in order to perform the backup of a virtual computer. If the capture is here, Independent disks prevents taking snapshot.

  -GaneshNetworks-

• Types of backup destination VMware Data Recovery

  IM test VMware Data Recovery and reading it can save to different destinations. Here's a sentence from of the Administrator's guide.

  You can store backups on network, VMDK shares, or RDM.

  The only option I see is the network share and make a folder called VMwareDataRecovery with other files and folders in it. If I backup more 1 VM to this nextwork share looks like it mixes everything together. I was under the impression that you can save in a file single vdmk.

  The only options I have under VMware Data Recovery for Destinations are Refresh, add a share of Nework, Format, Mount, Unmount, Extend and integrity check

  Remove you it from the virtual computer by means of the settings?  If so, have you selected the option to remove the virtual machine and remove the disc?  If you have them removed from the virtual computer through the settings, then you can delete browser data store.  It will come to your space.  Also, see IO errors is because you took the disk to the virtual machine without removing firstly by vDR Console's Configuration.

  That said, I would do the following:

  1. Ensure that the VM vDR does not any VMDK attached other than the VMDK root which is 5 GB in size.

  2. Open the browser of data store and make sure that the former VMDK you created have disappeared.  If not, select them and click on delete.

  3. Go to the Configuration Console for vDR and look at Destinations of backup to make sure there is nothing there.  There should be nothing in the list of destinations, if there are, remove them.

  4. After checking the above, create a new size 15GB VMDK.

  5. Restart your virtual machine of vDR

  6. Go into the Console to Setup vDR and select the disk that you created in the backup Destinations, do a right click and select format.

  7. The size should report something similar to what my screenshot of previous shows.

  I would like to know if that works for you!

  If you have found this helpful at all prices please points using the correct or useful!  Thank you!

• Data recovery is running indefinitivly

  Hello

  running VMWare Vcenter 5.0.

  When you enter data store manager Equallogic under VSphere client (V5.0), on the left column, the name of my Vcenter, and normally, under the present it seems the cluster, then the data store; but it only shows "data recovery" and not going anymore.

  So I run VSphere Client from another PC, and it worked because the same problem occur.

  What's wrong?

  Thank you to.

  Kind regards.

  Fred.

  I had the same problem & wrote a blog about it. It will be useful.

  http://patrickhoban.WordPress.com/2012/09/28/0815-2

  Kind regards

  Patrick Hoban

  http://patrickhoban.WordPress.com

• Error starting data recovery - "your CPU does not support long mode.

  Hello

  When I turn on the VM data recovery, and after that he begins the boot process, it displays a message "your CPU does not support long mode. Use a 32-bit distribution"

  Data recovery is installed on an ESX 4.0 update1 then the ESX is installed on a VMware Workstation 6.5.2 as a virtual machine in my home test environment.

  My processor is a 64 bit CPU (AMD Phenom 9950 Quad-Core).

  I wonder if this message is because the ESX is running in a virtual machine on the workstation may be that it not only Duke that the processor is a 64-bit?

  Someone at - he of the idea?

  Thank you

  Marcos

  You can run the 64-bit if clients your ESX is a virtual machine. VMware Workstation does not pass through the VT extensions that are necessary for the performance of a 64-bit as VDR host.

• Data recovery restore VMWare DR site

  We have a VMWare (Enterprise) of production environment I want backup several miles on a fiber attached DR site.  We run VMWare Data Recovery in the production environment, backup through the fiber on an EMC on the site of DR. My goal is to have a mirror of our production environment on the DR site where we can manually restore our VMS disaster.

  My question is - can I run say 'VMWare Essentials Plus' on the site of DR who understands "VMWare Data Recovery" and attach it to the backups of the production environment so I can restore backups of production on the DR site failure?  Is that how 'VMWare Data Recovery' works or can I only restore the original environment?

  To be able to restore the backup of the original ESX, you must have (in the DR site) a clone of the vCenter Server, cause, you must 'see' the ESX in the VDR plugin.

  But VDR plugin can also run on vSphere client connected to a single ESX, you can at least restore to another ESX.

  Are there problems?

  The big problem is what happen if you lose your data integrity VDR... can you lose all the restoration? Not a good scenario.

  So I suggest to have at least a second level of backup (perhaps only a month) in a "simple" format converter (for example) can handle. VCB or a simple export with Convert (or a clone of vCenter) could be a simple solution.

  Do not forget that there is also the solution of replication, both at the level of SAN (usually very explensive) and the virtual machine (for example, Veeam Backup or Vizioncore vReplicator) level.

  André

• Unable to activate plugin vCenter data recovery

  I installed the plugin for vCenter Data Recovery and I went into the Pugins manage and it is listed as disabled. If I right click it nd select activate, nothing happens.  No error, but it does not either. Someone at - there experience this problem?

  -Daniel

  chiazynloo,

  Build numbers seem to be off - unlike the version numbers correct for Beta 2 or RC build recovery of data and vCenter Server 4.0 RC respectively.  Where did you got these bits?

• Help to remove the partition on a hard drive and data recovery

  I have two hard drives in my PC, the C: drive is 80 GB, and the F: drive is 120 GB.  The second drive (120 GB) is divided into two partitions.  I just deleted the partitions and makes the hard drive again in a single disc, however I had some important files on the F: drive that I thought I had copied to the C: drive but they are not there.  Is there anyway that is using the software I can return the drive to two drives and recover my data, please help

  Hello

  First of all, do not use the hard drive. This can make things sunk. A few things may already be unrecoverable. I would even delete the drive letter to stop inadvertently automated processes to use.

  There are two ways I can think of.

  1. buy a partitioning software disk that supports the undelete partition. On windows XP PartitionMagic was a very good product if symantec will still sell it. Given that Symantec has continued to develop, I had to switch to product partition Paragon. Sound was trash to some things, cloning in particular a double boot with loads of partitions - it has an undelete function which I didn't use. The fact that you have created a new partition could mean that the restoration may not work. You may need to delete the current, probably empty, partition everything first and then perform the restoration.

  2. buy a data recovery software that will scan the hard drives, including the unpartitioned space. I chose R-Studio and it was very good stuff even recovery from hard drives that fail. It was not 100% effective, but it is perhaps down to the severity of failure rather than the product. In situations like yours, it was very effective.

  Please mark this as useful or response if applicable.

  Tricky

• Netflix in Media Center returns a 'there was a problem of data recovery. "Check the works of your internet connection and try again" error instead of loading Netflix data.

  context: a previous thread with an identical title never responded, the problem just disappeared.  Well its been two weeks since then and the problem came back.

  somethings which may or may not apply: internet TV seems to work better in media center.  All updates have been applied to H.P. of Vista SP2. Netflix works fine in ie8 (such as the internet, of course). Tried to delete all the Internet Options, delete browsing history section of Internet Explorer. I get the same error message with my windows 7 professional media center, but netflix seems to play anyway (no game with vista). I recently installed quicktime alternative 2.72 to see what it was and how it worked, then removed and put back in quicktime.

  Tried / symptoms:

  -Remove all the browsing history (econcepts)
  -Same message on Win7pro but works even when (econcepts)
  -Works on Win7 no problem (omegafiler)
  -Works in ie 8 (econcepts)
  -Works in crome (Martin TX)
  -Consensus is that it started around December 30, 2009 (GeoffG1, johnetX, me)
  -Remove and reinstall silverlight (omegafiler)
  -Remove and replace netflix plugin (omegafiler)<- how="" did="" you="" do="" that="">
  -Netflix says: microsoft problem (Nitestalker)
  -Microsoft is silent (this thread - on vacation?)
  -Same problem on 32-bit and 64-bit VMC (JRSMiamiFL)
  -No applied update (johnetx)<- perhaps="" date="" related="" or="" drm="" date="">
  -Disconnect from netflix, you reconnect again - ultimately the same error (chicagokiwi)
  -Tried to reduce the number of items in the queues to well below the limit of 200 (econcepts)
  -Tried the register / unregister the third wire procedure, no joy (does not break anything else however)
  -Disabled the firewall, no change (econcepts)

  related topics:
  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/0c154c0a-1fcb-4353-8c5e-b394e885256d

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/aaab24a0-4BB9-42FA-a5ee-46a733d6560f

  http://social.answers.Microsoft.com/forums/en-us/vistamedia/thread/f05f69c7-6456-4117-B302-27c08886ea1e

  Someone else knows Netflix not being is not able to connect?  It started yesterday (30/12/2009) for me.  I looked fine the day before without problem.  The message I get says "there was a problem of data recovery.  Check the works of your internet connection and try again. Ok.  I make it work with both my VMC - one with the service pack and the other without.  My OS updates have been loaded in early December, so I don't see how this could it be.  I searched and found this problem has come up before, but I have not found a solution.  I made NO changes to my HTPC.

  Those who have and solved this problem.

  UPDATE UPDATE UPDATE UPDATE UPDATE UPDATE *.

  2009-01-05 has attempted to start Netflix this morning and you know, it works on both my VMCs.  That's the good news.  So now the real questions are:

  Only 20 people reported it as a problem and only 6 on the green button.  I believe that it affected all the world with Media Center.  So why not discussed much?

  It already happened, causes a stir and silently slips without known cause or cure.  How can we find out what caused this and how to prevent it from happening again in the future?

  *******************************************************************************************

• Failed to load movies Netflix in Media Center message appears to indicate there was a problem of data recovery. Check the works of your internet connection and try again.

  Original title: cannot load Netflix movies in Media Center

  Netflix photo click on the message appears indicating a problem of data recovery.  Check the works of your internet connection and try again.

  Hi Barbarasimonetti,

  (1) since when are you facing this problem?

  (2) remember to make changes?

  (3) what is the complete error message you receive?

  Method 1: You can follow the steps described in the article below

  Known issues and limitations of Netflix on Windows Media Center for Windows Vista

  http://support.Microsoft.com/kb/972496

  Method 2: If a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected. Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer
  ***************************************************************************

• for damaged or not data recovery software damaged a hard drive for windows that's easy to use and understand

  Hello

  I would like to know what data recovery tool is the best for professional use for deleted files, pictures ect.

  'more' to recover damaged hard drive data.    I'm looking so recovery tool for real data that is easy to use and understand who can recover all types of data from hard drive damaged or undamaged

  Thank you

  Johan

  Tuesday, January 14, 2014 15:20:06 + 0000, johan davidian wrote:

  I would like to know what data recovery tool is the best for professional use for deleted files, pictures ect.

  If you are talking about undelete programs, car brands, or
  anything else, which is better is a matter of taste. You will get different
  responses from different people.

  That said, I like http://www3.telus.net/mikebike/RESTORATION.html

  'more' to recover damaged hard drive data.    I'm looking so recovery tool for real data that is easy to use and understand who can recover all types of data from hard drive damaged or undamaged

  If you can recover data from a damaged disc depends on what the
  the damage. But in general you can not. In most cases, your only recourse
  is to bring or send the drive to a professional file recovery company.
  This kind of service is very expensive and may or may not work your
  case.