Re: How to get Corel WinDVD without using the recovery disk?

Similar Questions

• How to restart the Satellite 5200 801 without using the recovery disk?

  Hello
  I haven't used my Satellite 5200 801 for awhile and now it does not start. That's what I have on the black screen:

  Intel® Boot Agent Version 4.1.04
  Copyright © 1997-2002, Intel Corporation
  PXE - E61: Media test failure, check cable of
  PXE - M0F: Exit Intel Boot Agent.
  Insert system disk in drive.
  Press a key when tready.

  I have the product recovery disc, but which will erase all existing data and rebuild. Is there a way to boot my PC without the use of the recovery disk?

  Thanks for any help.

  > PXE - E61: Media test failure, check cable of

  This message means that laptop tried to boot from LAN.
  Given that this was not possible the PXE - E61: Media test failure, check cable appeared

  I guess that the HARD drive is defect and therefore, the laptop won't boot from the internal HARD drive.
  In this case also your internal data on the HARD disk are lost.

  But to be100% sure that you can remove the laptop HARD drive, could use a drive enclosure HARD 2.5 to connect the HARD drive to another computer just to check if you would be able to access data on the HARD drive

• Qosmio F20 - how to format only C: partition using the recovery disk

  Hello

  My laptop is Qosmio F20

  After installing my OS using the recovery CD, I created more partitions... now, I have 5 partitions.
  Now I want to reinstall my OS on the C: where there already exist right now but I would like to format the C: partition until I use the "expert installation"...
  How can I do?

  Also, if I used the 'expert' facility that gives me the option to choose which partition I like to use. He reformatted the partition before installing or it is it will be overwritten?

  Thank you some much in advance.

  As far as I know the partition will be formatted quickly at first and then the recovery image is installed.

• How do you reinstall to factory settings using the recovery disk

  Hi, I created the set of recovery disks. Can you please guide me how to reinstall to factory settings using the recovery disk.
  Thank you

  Put the first disc in the CD/DVD drive.
  Turn on the device, press F12, choose ODD as device boot and boot from the CD/DVD drive containing the recovery disc.
  Follow the instructions on the screen.

• How to get distinct records by using the ListAgg OBIEE report function?

  Hi all

  I get a correct result as mentioned below. But I don't see duplicates in my result here, in my example, I get duplicate for the name of the employee 'Pat '. So how to get Distinct values by using the LISTAGG function?

  Data set of sample with the Department and its employees

  Service employee

  ----------      ----------

  Marketing Michael

  Pat of marketing

  Pat of marketing

  Pat of marketing

  Purchase of Den

  Purchase of Alexander

  Purchase of Shelli

  Purchase of Sigal

  Guy of purchase

  Purchase of Karen

  Using the ListAgg function, we can convert it to:

  Employees of the Department

  -----------     -------------------------------------

  Marketing of Pat, Pat, Pat, Michael

  Purchase of Sigal, Shelli, Karen, Guy, Den, Alexander

  I tried a lot of things, but I'm not able to understand how exactly this can be achieved, if anyone has any idea or suggestions please do share, thanks in advance.

  After much research, I found the solution & I want to share what he finds very useful, we can create SQL logic in the Advanced tab, as below and after you click Rescan, and then you will get your desired results.

  SELECT saw_0, Evaluate_Aggr T1.dept ("ListAgg(%1,'' & '') intra group (about 1%)") ("as long as VarChar (1000), T1.emp) saw_1 FROM)

  SELECT 'emp_dept '. "the Department dept,

  'emp_dept '. "' employee ' emp

  IN THE "DOMAIN".

  GROUP BY dept, emp

  ) T1 GROUP FROM T1.dept ORDER BY saw_0

  Also note here that we have good anti-aliasing for columns parent (ex: saw_0, saw_1), another by mistake oracle bi server.

• How to reformat Satellite L645-S9412D using the recovery media creator?

  This is my first laptop and I do not know. I already burn disc of recovery media creator, but I don't know how to use it. Could someone teach me how to? Thank you. And yet something, do I have to re - install the operating system when I used the recovery disk?

  Thank you for your help... :)

  With recovery disk, you can install recovery image and game for laptop to factory settings. Please note: when you do this backup data will be deleted so before that, you back up all your important data.

  When you want to use the recovery disk to do on this way:
  Start your laptop and press F12 to get into the boot menu
  When the start menu is shown on the screen, place the recovery in the optical disc drive disk
  Choose the CD/DVD in the menu and press the ENTER key
  Just follow the menu on the screen.

  Do it, test it. Check alone, how it works.

• How to recover files before using the recovery disk?

  Hello

  I have a Toshiba Equium and when I turn it on it loads the screen where you log does not appear, it has a black screen with a mouse, and I need to use the recovery disk to get back to normal, but I don't want to format the hard drive that I have a lot of files so it is anyway to recover the files?

  Hello

  In my opinion the easiest way is you remove the laptop HARD drive and put it in a box external HARD disk. Then, you can connect this external HARD disk to a different computer now and have access to the files on your HARD drive and you can perform a backup.

  An alternative you can boot from a Linux Live CD and back up your files on a different USB devices.

• Satellite M300 - how to use the recovery disk

  Hello world

  I was wondering how to use the 2 recovery discs that I burned recently if I wanted to fix my USB ports (as seen in my Toshiba M300 - wire to USB ports)

  Any suggestions?

  Hello

  You can use the only recovery disk to reinstall the whole OS!
  This means that the use of the recovery disk will format the whole HARD drive and will set the laptop back to factory settings!

  If you want to use the recovery disk and then insert it into the ODD and the start-up of this disc.
  Then the installation of the OS should move forward and you should follow the instructions on the screen.

  All that s

• Satellite U300 - how to use the recovery disk?

  I inserted the recovery disc 1 and then restarted my computer, but nothing happened.
  I really need to fix my cause cell it's time to review!

  Does anyone know how to use the recovery disk or affecting function press when the laptop starts to use the programmed recovery?

  Thank you!

  Hello!

  If you have inserted the recovery disc you must only start her everything that s!

  I m not sure but I think you can go into the advanced boot menu if you press F12. Alternative change you the boot priority in the BIOS. You can access BIOS by pressing F2.

  Good bye

• Today I bought a new Mac that does ' t have a cd/dvd drive. I also bought Adobe photoshop elements 13. Is it possible that I can install this without using the provided disks? Help, please

  Today I bought a new Mac that does ' t have a cd/dvd drive. I also bought Adobe photoshop elements 13. Is it possible that I can install this without using the provided disks? Help, please

  http://www.Adobe.com/downloads/other-downloads.html can help

• Desktop HP pavilion s5-1540: using the recovery disk

  I have the recovery disc I made when I got this pc.

  Now, I need to use.  I started the pc with the disc, but nothing happened.

  Can I get advice on how to use the recovery disk?

  Note.  I'm not very computer savy.

  I sent my pc in for repair to a place of repair no HP (insurance).  They have installed a generic operating system but there is no program file.  I want my pc as it was when I got it.

  I can't get these disks to run.

  any help is much ajppreciated.

  Insert the recovery disk 1 in the drive, restart the PC, when you see the HP logo screen start to type F9 on the keyboard, this should load the Boot Manager, and then highlight (using up/down keys) internal CD-ROM drive cd/dvd and press ENTER, it will now boot from the recovery disc 1 and we hope to start the restore process.

  It is a long process not to disturb the tactile keys or pc, while he recovers, it will reboot several times on his own, you know when it is done when it asks you to set up the pc for first time use.

  Make sure that the recovery discs are clean before you start.

• Satellite A210 - cannot use the recovery disk - error 20-DATA-048F

  I'm going to use the cause of recovery partition does not work my windows, and whenever I do it, it comes up with an error "20-DATA-048F.

  How can I fix my computer!

  Any help would be greatly appreciated.

  Have you tried to format the HARD disk until you try to use the recovery disk?
  Sometimes, I read in the forum that this may solve the problems with the recovery disk and so you can take the Windows XP disc or another tool that is able to format the drive.

  But after that, you have the Toshiba recovery disc. You are not able to use the HARD drive recovery feature.

• Sony vaio fw Series notebook PC hangs after complete recovery using the recovery disk

  I have sony vaio fw notebook computer series. the problem is that a week ago my laptop keyboard did not work properly, his work of sttops not all but a few keys and I stop directly by using the power button / stop and then I turn it on after day and the computer started to freez. I though I could get rid of this by restoring the complete system and I did it by using the recovery disk that I created at the firrst time I've had this laptop. during the recovery process, my laptop crashes twice but in any case, I managed to do thanks to a system of complete restoration and after that when I turn on my laptop, then it worked fine for 10-15 minutes but after that it started to freeze up again. I had to stop it again using the button / stop and it happened about 5 - 10 times, after that I decided to do a full restore using the restore disc. as I was doing that the process is not complete because it crashes when I do this. Finally, I managed to do a full system restore after more than 10 + time and guess what it lights up then my laptop crashes completely. I can't open anything... mouse works very well but if tried click on any program then you can not click on it, please help what should I do now... p.s, my computer works fine in safe mode with networking, but in normal mode its completely freeze

  Hello

  Go to the Sony website and download the latest Vista drivers for your model.

  http://eSupport.Sony.com/us/p/select-System.pl?model_type_group_id=10

  If the problem persists after that, you may have a hardware problem.

  See you soon.

• Question aboput using the recovery disk

  If I use the recovery disk, it will remove the Toshiba assist installed on my pc? I don't have the tools and disk utilities.

  Thank you

  Using the recovery disc disc HARD integer will be erased but it is applied to factory as from the date of purchase. This means that everything will be installed again (all drivers, tools, and utilities).

  The laptop will be as good as new. And of course Toshiba Assist is part of the recovery image and it will be there again.

  Good bye

• Satellite A300-1mz I use the recovery disks after an upgrade of the HARD drive?

  I'm upgrading the disk hard of my * toshiba a300-1mz *, but I am sure that I can use the * recovery disks * marked the first boots to the l.o. (vista)

  I expect your support...
  Thank you very much...

  Hello

  Yes, you can do it!
  If the HARD drive has been recognized by the BIOS, then you should boot from the recovery disk Toshiba in order to reinstall the operating system which has been pre-installed by Toshiba.

  Welcome them