Re: How to read the blue screen DMP file?

I got this blue screen on my laptop Toshiba Satellite A660. I really put t know read. Can someone please?
I downloaded the dmp file (renamed as a copy because it s not accessible - please rename as dmp once downloaded)

Help, please

http://rapidshare.com/files/455235024/033011-28438-01_-_copy.zip

Hello

Maybe this article will help you - http://support.microsoft.com/kb/315263

Tags: Toshiba

Similar Questions

  • How to read the VI Analyzer config file?

    Hello

    How to read the analuzer vi configuration file? I'm getting a lot of errors on the size of the front panel and I don't know what should be the size you want. Where is the maximum expected size of the specified front panel?

    Kaspar says:

    Hello

    How to read the analuzer vi configuration file? I'm getting a lot of errors on the size of the front panel and I don't know what should be the size you want. Where is the maximum expected size of the specified front panel?

    If you have VI Analyzer installed, you can load the configuration file and look at the section select the Tests. There is a test for the maximum size of front under front-> User Interface. The default value is the resolution of the current monitor of the PC (including multiple monitors). You can change to the desired option.

  • How to fix the blue screen (OD)?

    Hello

    I frequently get a BSOD that I believe is directly related to my purchased recently Bluetooth speaker (Logitech EU Boombox). Which suggests as possible my bluetooth driver is involved.

    I managed to get the speaker to pair once, and I was able to listen to wireless music via Spotify. However, I had problems reconnecting, which could sometimes be fixed by deleting the bluetooth device and then add it again. To the course to add it again, however, my computer would regularly crash, show me the blue screen and then restart. I am a novice and have no idea how these problems. FYI, I'm in a constant dialogue with the dailies with Logitech, but they are very slow and does not give clear instructions.

    I really hope that someone can help you.

    The blue screen shows IRQL_NOT_LESS_OR_MORE at the top and I am paste the error below, log that includes the BC code:

    ---------------------------------------------

    Signature of the problem:
    Problem event name: BlueScreen
    The system version: 6.0.6002.2.2.0.768.3
    Locale ID: 1035

    More information about the problem:
    BCCode: a
    BCP1: 805ED000
    BCP2: 00000002
    BCP3: 00000000
    BCP4: 826E1F33
    OS version: 6_0_6002
    Service Pack: 2_0

    Product: 768_1

    Files helping to describe the problem:
    C:\Windows\Minidump\Mini030914-03.dmp
    C:\Users\ilda pc\AppData\Local\Temp\WER-38657-0.sysdata.xml
    C:\Users\ilda pc\AppData\Local\Temp\WERD335.tmp.version.txt

    Read our privacy statement:
    http://go.Microsoft.com/fwlink/?LinkId=50163&clcid=0x0409

    ------------------------------------------------

    Thank you, David!

    All attached files of the DMP are the bug check IRQL_NOT_LESS_OR_EQUAL (a) .

    This indicates that Microsoft Windows or a driver in mode accessed kernel memory paged at DISPATCH_LEVEL level or above.

    This bug check is issued if the memory paged (or invalid) is accessible when the IRQL is too high. The error that usually generates this bug check occurs after the installation of the faulty device driver or service system, BIOS.

    If we take a look at the call stack:

    1: kd > kv
    ChildEBP RetAddr Args to child
    805ec518 826e1f33 badb0d00 00000001 85f81d02 nt! KiTrap0E + 0x1c5 (FPO: [0,0] TrapFrame @ 805ec518)
    805ec594 913ce545 86a00a88 805ec5b4 82670011 nt! memcpy + 0 x 33
    WARNING: Information not available stack unwind. Sequence of images may be wrong.
    805ec8f4 913ce842 86a26e00 00000000 86a009c4 BthAvrcp + 0 x 2545
    805ec934 826e00fb 86a26e00 00000000 01a009c4 BthAvrcp + 0 x 2842
    805ec96c 8ef2a25c 00000000 805ec994 8ef2a2a1 nt! IopfCompleteRequest + 0x11d
    805ec978 8ef2a2a1 86a0ddd0 86a26e00 86a26e00 bthport! BthCompleteRequestEpilogue + 0 x 38 (FPO: [Non - Fpo])
    805ec994 8ef62d20 86a0ddd0 86a26e00 00000000 bthport! BthCompleteRequestEx + 0 x 27 (FPO: [Non - Fpo])
    805ec9c0 8ef5e4d5 86475070 015ecaa8 86613960 bthport! L2Cap_CompleteReadIrpList + 0x8c (FPO: [Non - Fpo])
    805ecab4 8ef3669d 01722ea0 b 86475070 86963 08 bthport! L2CapInt_ProcessReadBip + 0x3ef (FPO: [Non - Fpo])
    805ecaf4 8ef35f65 86722e40 86613960 86722e40 bthport! HCI_ProcessAclReadBip + 0x6d3 (FPO: [Non - Fpo])
    805ecb28 8ef5a0db 86613960 00000000 00000016 bthport! HCI_ProcessAclRead + 0x25b (FPO: [Non - Fpo])
    805ecb44 8ef2c7a8 86613960 87c77f78 00000000 bthport! HCI_ProcessMpBip + 0 x 67 (FPO: [Non - Fpo])
    805ecb60 8f3ca5ef 87c77f78 865cb520 865cb4e0 bthport! BTHPORT_RecvMpBip + 0x3c (FPO: [Non - Fpo])
    805ecb74 8f3cdc4a cd 86733 0 8660f000 00000016 BTHUSB! BthUsb_ReadTransferComplete + 0x4b (FPO: [Non - Fpo])
    805ecbcc 8f3cdec6 86a0dd18 805ecbe8 865e546b BTHUSB! UsbWrapWorkRoutine + 0 x 78 (FPO: [Non - Fpo])
    805ecbf4 826e00fb 86a0dd18 865e5368 015cb4e0 BTHUSB! UsbWrapInterruptReadComplete + 0xb4 (FPO: [Non - Fpo])
    805ecc28 8e543e0a 82680734 87c79d08 00000000 nt! IopfCompleteRequest + 0x11d
    805ecc64 8e542132 85f81028 865e5368 87c7e960 USBPORT! USBPORT_Core_iCompleteDoneTransfer + 0x6cb (FPO: [Non - Fpo])
    805ecc94 8e54495f 85f81028 85f81bf8 39585043 USBPORT! USBPORT_Core_iIrpCsqCompleteDoneTransfer + 0x4f5 (FPO: [Non - Fpo])
    805eccc0 8e53e24f 85f81028 85f81bf8 85f81002 USBPORT! USBPORT_Core_UsbIocDpc_Worker + 0 x 122 (FPO: [Non - Fpo])
    805ecce8 826e35a2 85f81c04 34776478 00000000 USBPORT! USBPORT_Xdpc_Worker + 0 x 274 (FPO: [Non - Fpo])
    805ecd50 0000000e 826e177d 00000000 00000000 nt! KiRetireDpcList + 0 x 147
    0000000e 805ecd54 00000000 00000000 00000000 nt! KiIdleLoop + 0 x 49 (FPO: [0,0,0])

    -FAILURE_BUCKET_ID: 0xA_BthAvrcp + 2545

    ^^ Driver Bluetooth audio/video of the system.

    Go to the Asus website - http://support.asus.com/download.aspx?SLanguage=en&p=3&s=78&m=F3Ka&os=&hashedid=JFMwUdQ1L5V3eIKf

    Download and install the Bluetooth for Vista 32-bit driver.

    -----------------

    Remove and replace avast! with Microsoft Security Essentials for purposes of troubleshooting temporary as it may cause conflicts:

    avast! removal - http://www.avast.com/uninstall-utility

    -MSE http://Windows.Microsoft.com/en-us/Windows/Security-Essentials-download 

    Kind regards

    Patrick

  • How to fix the blue screen?

    original title; How to fix blue screen of death?

    our computer says fatal system error and I don't know how to fix it.

    I tried all the suggested in the forums, I met online, but they didn't work [including restoration, safemode, last good known, etc.]
    can you help me please?
    [We have Windows Vista and I don't seriously how it happened since I'm not the one who used it last person admitted who did fact-_-]
    I would appreciate your help. Thank you

    Hello

    What is the BCCode or stop the blue screen Code?

    Check this thread for more information using BlueScreenView, MyEventViewer and other methods
    to troubleshoot the BlueScreens - top 3 responses (+ 1 other).

    http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/3deab2fa-4000-4136-8c78-a3d22b1db009

    We can analyze the minidumps if make you it available to the SkyDrive or another file
    sharing sites.

    ZIP or download the content of the C:\Windows\minidump

    Use SkyDrive to upload collected files
    http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

    -------------------------------------------------------------------------

    Also this, so you can see the probable bluescreens.

    Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
    (also Windows 7)
    http://www.winvistatips.com/disable-automatic-restart-T84.html

    ===========================================================

    Check out these utilities to see if information may be collected:

    It is an excellent tool for displaying the blue screen error information

    -Free - BlueScreenView scans all your minidump files created during "blue screen of death," collisions
    and displays information about all accidents of a table.
    http://www.NirSoft.NET/utils/blue_screen_view.html

    -------------

    MyEventViewer can be verified at the time of the blue screen (BSOD) within a second or so of the
    time of the BSOD to provide more information about the possible cause - see TIP.

    MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
    TIP - Options - Advanced filter allows you to see a period of time instead of the whole of the record-
    Set it for a bit before and after the time of the BSOD.
    http://www.NirSoft.NET/utils/my_event_viewer.html

    ------------

    AppCrashView - free - a small utility for Windows Vista and Windows 7 that displays the details of all the
    application goes down has occurred in your system. The information breaks down is extracted from the .wer
    the files created by the Windows Error Reporting (WER) of the operating system component of each
    time that an accident has occurred. AppCrashView also allows you to easily record the list of accidents to
    text/html/csv/xml file.
    http://www.NirSoft.NET/utils/app_crash_view.html

    I hope this helps.

  • How to fix the blue screen issue?

    Hello

    I have thinkpad w530 win7 pro.

    There were a few times that suddenly I got blue screen, I used BluescreenView and he told me that the blue screen happened because these two files: ntfs.sys and ntoskrnl.exe

    What can I do?

    Thank you!

    Please let us know. I was heading in that direction, I wanted to just make sure that the easy stuff has been addressed first.

  • How to fix the blue screen STOP BUGCODE_USB_DRIVER 0x000000f?

    "RE-OPENED THE CASE.

    Please help me to correct my bluescreen error
    Signature of the problem:
    Problem event name: BlueScreen
    OS version: 6.1.7601.2.1.0.768.3
    Locale ID: 2057
    More information about the problem:
    BCCode: fe
    BCP1: 0000000000000008
    BCP2: 0000000000000006
    BCP3: 0000000000000005
    BCP4: FFFFFA80065AB000
    OS version: 6_1_7601
    Service Pack: 1_0
    Product: 768_1
    Files helping to describe the problem:
    C:\Windows\Minidump\040113-34507-01.dmp
    C:\Users\Aaron\AppData\Local\Temp\WER-9469011-0.SysData.XML
    Read our privacy statement online:
    http://go.Microsoft.com/fwlink/?LinkId=104288&clcid=0x0409
    If the online privacy statement is not available, please read our offline privacy statement:
    C:\Windows\system32\en-US\erofflps.txt

    Hi Aaron,

    From your description, I understand that you get the Blue error screen: BUGCODE_USB_DRIVER STOP 0x000000f.

    What is the brand and model of your computer?

    I suggest you to follow the steps from the following link and answer us in the State.

    Bug Check 0xFE: BUGCODE_USB_DRIVER

    http://msdn.Microsoft.com/en-us/library/Windows/hardware/ff560407%28V=vs.85%29.aspx

    WARNING CHKDSK:

    Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

    Anti Virus WARNING: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

    I hope the above information helps!

  • How to read the .txt adfLib pot file to the model layer by using the relative path

    Hello

    In my application, I use the ExtendedDynamicFldTbl (extends weblogic.wtc.jatmi.DynamicFldTbl), which the manufacturer requires the field file path table as a parameter.

    In the API, it is said that this name of path can be an absolute path, a relative path to the directory where Java has started, or a relative path that can be found as a resource on the classpath.

    I have created this ExtendedDynamicFldTbl to the model layer project, placed the fild_tbl.txt in a separate package and pass the path relative to the DynamicFldTbl constructor.

    Given my code below to get the instance of ExtendedDynamicFldTbl
    package model.tuxedo;

public class ExtendedFldTbl  extends DynamicFldTbl
{

    private static ExtendedFldTbl extendedFldTblinstance = null;
    
    public ExtendedFldTbl(String tablePath, boolean flag)
    {
        super(tablePath, flag);
    }
    
    public static ExtendedFldTbl getInstance()
    {
        if (extendedFldTblInstance == null)
        {
            URL url = extendedFldTblInstance.class.getResource("resource/fldtbl.txt");
            if (url == null)
            {
                throw new RuntimeException("Tuxedo Service : fldtbl.txt is not found in the path 'model.tuxedo.resource' ");
            }
            extendedFldTblInstance = new ExtendedFldTbl (url.getPath(), true);
            String[] list = extendedFldTblInstance .getFldNames();
            System.err.println("fldtbl loaded. Total FML entries loaded = " + list.length);
        }
        return extendedFldTblInstance ;
    }
}
    I just added the output of the build of the layer model to view the project of the layer and tested. It works fine and I am able to get the ExtendedFldTbl instance with all loaded fields. But rather than add dependencies, if I create an adfLibJar for the layer model project and you add to view the project of the layer, it does not work. It is not ablt to read the file of adf lib jar file.

    Issues related to the:

    1. How can I solve this?
    2. Although I have kept the field text file table in the source of the project itself, when I read the url, it is
    "C:/Documents and Settings/raguramanv/Application Data/JDeveloper/system11.1.1.4.37.59.23/DefaultDomain/servers/DefaultServer/tmp/_WL_user/SampleWtc/3gkmt9/war/WEB-INF/lib/SampleWtc_Model_adflibSampleWtc1.jar!/model/tuxedo/resource/fldtbl.txt"
    Instead of the physical directory, how can I use application in model layer context?


    Thanks in advance

    Rambeau

    Hello

    Try /adf/ or /afr/ in the URL. Then includes the ADF resource loader which is used to get the contents of a lib of the ADF. Take a look at the structure of ADF library where the file is located in. It should be in a directory with /adf in the folder structure

    Frank

  • How to fix the blue screen BCCode C2 error code?

    Hello everyone, my guard computer crashing and giving me this information when I reboot

    More information about the problem:
    BCCode: c2
    BCP1: 0000000000000007
    BCP2: 000000000000110B
    BCP3: 00000000042D 0003
    BCP4: FFFFFA8005BD33E0
    OS version: 6_0_6002
    Service Pack: 2_0
    Product: 256_1
    Files helping to describe the problem:
    C:\Windows\Minidump\Mini121411-01.dmp
    C:\Users\Administrator\AppData\Local\Temp\WER-41812-0.SysData.XML
    C:\Users\Administrator\AppData\Local\Temp\WERA9FB.tmp.version.txt
    The computer crashes during the games, or doing absolutely nothing.

    Hello

    Results verified BlueScreenView WinDBG / DumpCHK.

    The Bug_Check were C2, D1 and 9F.

    C2 CAUSE NETIO. SYS that is a component of Windows which means something else
    He drove in error. The root cause was probably Rtlh64.sys RealTek network driver.

    BugCheck C2, {7, 110 b, 0, fffffa800802b200}
    Probably caused by: NETIO. SYS (NETIO! NetioDereferenceNetBufferListChain + 137)

    Battery - fffffa80'0728ea00: Rtlh64+ 0x69d7

    Rtlh64.sys dated 26/09/2006 driver Realtek 8101E/8168/8169 PCI/PCIe adapters.

    fffffa60 '0237-000 fffffa60' Rtlh64 0238b 000 T (no symbol)
    Loaded symbol image file: Rtlh64.sys
    Image path: \SystemRoot\system32\DRIVERS\Rtlh64.sys
    Image name: Rtlh64.sys
    Timestamp: My Sep 26 04:20:23 2006 (45190CF7)

    ------------------

    PACER.sys CAUSE D1, which is a component of Windows which means something else
    Drover at fault. First cause was probably Rtlh64.sys.

    BugCheck D1, {0, 2, 1, fffffa6000c02318}
    Probably caused by: pacer.sys (pacer! PcFilterSendNetBufferListsComplete + f4)

    Battery - fffffa80'07390380: Rtlh64+ 0x69d7

    ------------------

    9F CAUSE Rtlh64.sys RealTek network driver.

    9F error checking, {3, fffffa800515fa30, fffffa8006dc9050, fffffa8004b3bb20}
    Probably caused by: Rtlh64.sys

    -----------------------------------------

    BiosVersion = V2.3
    BiosReleaseDate = 2008-07-07<-- there="" may="" be="" an="" update="" to="" the="" bios,="" low="" level="">
    pilots and pilots of major on-board and separate devices (see methods of driver update
    top - performing DriverView - drivers Microsoft hide the value VIEW - updated from those without dump
    in their names.
    SystemManufacturer = MICRO-STAR INTERNATIONAL CO., LTD.
    SystemProductName = MS-7353
    SystemVersion = 1.0
    BaseBoardManufacturer = MICRO-STAR INTERNATIONAL CO., LTD.
    BaseBoardProduct = MS-7353
    BaseBoardVersion = 1.0

    Update Realtek 8101E/8168/8169 adapters PCI/PCIe driver to check first with MSI and
    then RealTek.

    Support MSI
    http://www.msi.com/index.php?func=service

    MSI - Downloads (drivers and BIOS)
    http://www.msi.com/index.php?func=downloadindex

    MSI - Forums
    http://Forum-en.msi.com/

    MSI - Service
    http://us.msi.com/index.php?func=service

    MSI - Live Update online
    http://www.msi.com/index.php?func=downloadindex

    MSI - Contacts - USA - North America value
    http://www.msi.com/index.php?func=HTML&name=aboutus

    After update to MSI if possible check RealTek for later.

    RealTek - RTL8110E/8168E<-- i="" think="" this="" is="" the="" driver="" at="" realtek="" however="" it="" may="" not="">
    so, check carefully - search downloads RealTek for the model.
    http://www.Realtek.com/downloads/downloadsView.aspx?langid=1&PNid=5&pfid=5&level=5&Conn=4&DownTypeID=3&GETDOWN=false#RTL8111B/RTL8168B/RTL8111/RTL8168
    RTL8111C/RTL8111CP/RTL8111D (L)
    RTL8168C/RTL8111DP/RTL8111E
    RTL8168E/RTL8111F

    I hope this helps and happy holidays!

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

  • How to read the EDF of LabVIEW files?

    Hi all.

    I'm reading a file (signals from the brain, EEG) FED in LabVIEW but I can't understand how do. I would like to respond to this challenge without converting the file EDF before the treatment.

    Is there anyone out there who can help me? I'm using LabVIEW 2010

    Kind regards

    Hi all.

    Thank you for your help. It finally works now!

    I tried uninstalled and reinstalled the file use of edf. And now it works fine, so the FED + and EDF.

    -Clausny.

  • I've been to see the BLUE SCREEN lately and I don't know how to fix it. I already checked the NVIDIA graphics card updates, but it's not!

    I've been to see the BLUE SCREEN lately and I don't know how to fix it. I already checked the NVIDIA graphics card updates, but it's not! I also uninstalled and Reinstalled but I don't think that worked.

    Signature of the problem
    Problem event name: BlueScreen
    The system version: 6.0.6002.2.2.0.768.3
    Locale ID: 1033

    Files helping to describe the problem (some files may be is no longer available)
    Mini092911 - 02.dmp
    SysData. XML
    Version.txt

    See a temporary copy of these files
    WARNING: If a virus or other security threat caused the problem, open a copy of file can harm your computer.

    Additional information about the problem
    BCCode: 116
    BCP1: 9CEE7510
    BCP2: CA 8, 16700
    BCP3: 00000000
    BCP4: 00000002
    OS version: 6_0_6002
    Service Pack: 2_0
    Product: 768_1
    Information about the server: ce621e4c-18c8-469e-8f97-42590f35c1d9

    AND:

    Description
    A problem with your video hardware caused Windows to stop working correctly.

    Signature of the problem
    Problem event name: LiveKernelEvent
    The system version: 6.0.6002.2.2.0.768.3
    Locale ID: 1033

    Files helping to describe the problem (some files may be is no longer available)
    WD-20110929-1029 - 01.dmp
    SysData. XML
    Version.txt

    See a temporary copy of these files
    WARNING: If a virus or other security threat caused the problem, open a copy of file can harm your computer.

    Additional information about the problem
    BCCode: 117
    BCP1: 9CEE7510
    BCP2: CA 8, 16700
    BCP3: 00000000
    BCP4: 00000000
    OS version: 6_0_6002
    Service Pack: 2_0
    Product: 768_1
    Information about the server: a59df662-85fc-45dd-a4b0-537bf6e212b3

    Hello

    Check with support of the manufacturer of the system (motherboard for customized systems manufacturer) if the video device
    is integrated on the motherboard. Also check with Nvidia Support, their drivers and documentation online
    and ask in their forums known issues.

    NVIDIA - drivers - use OPTION 1 to manually enter your info driver to get the most recent drivers.
    http://www.nvidia.com/download/index.aspx?lang=en-us

    NVIDIA Support - check with the support that she might be a known issue
    http://www.nvidia.com/page/support.html

    NVIDIA forums - also check for the forums it might be a known issue or others likely to have
    http://forums.nvidia.com/

    -------------------------------------------------------------

    Check this thread for more information on using BlueScreenView, MyEventViewer and other methods of
    Troubleshoot BlueScreens - answers top 3 (+ 1 more).

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/sometimes-i-get-a-blue-screen-when-using-IE-8/c675b7b8-795f-474d-a1c4-6b77b3fcd990

    We can analyze the minidumps if make you it available to the SkyDrive or another file
    sharing sites.

    ZIP or download the content of the C:\Windows\minidump

    Use SkyDrive to upload collected files.
    http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

    ------------------------------------------------------------

    References to Vista also apply to Windows 7.

    Have you updated your screen/video or other large recent drivers - check in Control Panel.
    Updates of Windows to see if a driver has been loaded it. Use this generic utility below
    and when you get to the section driver use the methods in the next message and then back to
    the troubleshooter as needed. In rare cases, antivirus/antispyware/security programs can
    cause this error.

    Also check with the support of system Maker and video/display of the map because he could be called
    questions - also check in their forums.

    BCCode: 116 0 x 00000116

    Bug VIDEO_TDR_ ERROR control has a value of 0 x 00000116. This indicates that an attempt
    to reset the display driver and recover a time-out has failed.

    BCCode: 116 0 x 00000116<-- read="" this="" link="" read="" this="">
    * 1275.html http://www.faultwire.com/solutions-fatal_error/attempt-to-Reset-the-Display-Driver-and-recover-from-0x00000116-

    ----------------

    BCCode: 117 0 x 00000117

    Bug VIDEO_TDR_TIMEOUT_DETECTED control has a value of 0 x 00000117. This indicates that the display driver failed in a timely fashion.

    BCCode: 117 0 x 00000117<-- read="" this="">
    * 1276.html http://www.faultwire.com/solutions-fatal_error/the-Display-Driver-failed-to-Respond-in-timely-Fashion-0x00000117-

    1. update the video driver - also look for the BIOS and chipset of low level drivers at the manufacturer of system
    of (card mother manufacturer custom systems). Check with Nvidia Support and forums.

    2 are looking for Virus/Malware.

    3 check the hard disk for errors - run Checkdisk (see below)

    --------------------------------------------------------------------------------

    The inclusion of 116 error in the troubleshooting code is the only coincidence and holds no.
    special meaning (other than pilot caused bluescreens occur with some frequency).

    Look in the Event Viewer to see if something is reported on those.
    http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

    MyEventViewer - free - a simple alternative in the standard event viewer
    Windows. TIP - Options - Advanced filter allows you to see a time rather
    of the entire file.
    http://www.NirSoft.NET/utils/my_event_viewer.html

    -------------------------------------------------------------------------

    Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
    info that would help. Such as ITC and 4 others entered at the bottom left. And all others
    error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

    As examples:

    BCCode: 116
    BCP1: 87BC9510
    BCP2: 8C013D80
    BCP3: 00000000
    BCP4: 00000002

    or in this format:

    Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
    Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

    It is an excellent tool for displaying the blue screen error information

    BlueScreenView scans all your minidump files created during 'blue screen of death '.
    hangs and displays information about all accidents of a table - free
    http://www.NirSoft.NET/utils/blue_screen_view.html

    BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
    There are other causes.

    You can do without if needed fail or the Vista DVD or recovery command prompt mode
    Options if your system was installed by the manufacturer.

    This tells you how to access the System Recovery Options and/or a Vista DVD
    http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

    You can try a system restore to a point before the problem started when one exists.

    How to make a Vista system restore
    http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

    -------------------------------------------------------------------------

    Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
    RUN AS ADMIN

    Enter this at the command prompt - sfc/scannow

    How to analyze the log file entries that the Microsoft Windows Resource Checker
    (SFC.exe) program generates in Windows Vista cbs.log
    http://support.Microsoft.com/kb/928228

    The log can give you the answer if there is a corrupted driver. (Says not all the)
    possible driver problems).

    Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

    How to run the check disk at startup in Vista
    http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

    -------------------------------------------------------------------------

    Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
    keyboard and mouse, as well as of other major device drivers.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    How to install a device driver in Vista Device Manager
    http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

    How to disable automatic driver Installation in Windows Vista - drivers
    http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
    http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

    -------------------------------------------------------------------------

    How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
    quit unexpectedly
    http://support.Microsoft.com/kb/958233

    Troubleshooting, STOP error blue screen Vista
    http://www.chicagotech.NET/Vista/vistabluescreen.htm

    Understanding and decoding BSOD (blue screen of death) Messages
    http://www.Taranfx.com/blog/?p=692

    Windows - troubleshooting blue screen errors
    http://KB.wisc.edu/page.php?id=7033

    -------------------------------------------------------------------------

    In some cases, it may be necessary.

    The Options or Vista recovery disk Startup Repair

    How to do a startup repair
    http://www.Vistax64.com/tutorials/91467-startup-repair.html

    This tells you how to access the System Recovery Options and/or a Vista DVD
    http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

  • I often get frequent blue screens on internet sites. Blue screen too fast for me to record specific error message. How can I put an end to the blue screen to get the error message?

    frequent blue screens often to internet sites.  Blue screen too fast for me to record specific error message.  How can I put an end to the blue screen to get the error message?

    en blue screen too fast for me to record specific error message.  How can I put an end to the blue screen to get the error message?

    If your computer is restarted when the BSOD appears, then you must change the by default for what to do in case of system error. It is easy to do, but takes a lot of mouse clicks to get there:

    Start | Control Panel | System | Advanced system settings (need for credentials for the administrator to spend here |) Advanced | Startup and recovery / settings.

    On this screen, uncheck the box under system failure that says automatically restart. The next time the BSOD appears, your computer will not do anything else until you press the reset button, so you'll have all the time you need to read and copy the error codes. Paste here, verbatim, and someone should be able to point in the right direction.

    ``````~~~~`````

    In the control panel choose reports on problems and Solutions (problem of type in the START search box), go to historical problem, right-click your error and choose check for the Solution. You can also examine the details.

    In administrative tools, choose the reliability and performance monitor and click on MonitoringTools then the reliability monitor (type reliability in research on Start). This list is a chart of the software installs, uninstalls, updated Windows and crashes by date. See if your plant has started to happen after you installed or uninstalled something.

    It may be useful to eliminate equipment defects

    Type of memory in the search box of start and choose Memory diagnosis

    In a command prompt (type command in the start search box then right click and choose Run as administrator) type

    CHKDSK c: /r

    If you have more than one drive replace C: with the other drive letters.

    Search for corrupted files by typing at the command prompt

    sfc/scannow

    You can clean boot troubleshooting http://support.microsoft.com/kb/331796

  • How can I stop the blue screen error caused by sffp_sd.sys

    Since the middle of the latest version of windows aprils has updated that I regularly get the blue screen... The last was 26/05/12 16:30...

    DRIVER_IRQL_NOT_LESS_OR_EQUAL

    STOP: 0X000000D1 (0X00000002, 0X00000000, 0X00000008, 0X914E8774)

    BTHUSB Device bthport.sys - 914E8774 address, base at 914E5000, Datestamp 4db03738

    Hello

    BTHUSB Device bthport.sys and sffp_sd.sys are the two components of Windows that means something else led him into
    Fault. First thing I would do is update the BlueTooth drivers. Check with the system manufacturer (mother's support-
    the Board Maker for systems (custom), their documentation online and drivers and ask in their forums (if any)
    known issues and/or / the real peripheral manufacturer support site. (See driver update methods in the next
    message.)

    ===============================================================================

    Pick up the pieces after a computer crash
    http://Windows.Microsoft.com/en-us/Windows-Vista/picking-up-the-pieces-after-a-computer-crash

    Check this thread for more information using BlueScreenView, MyEventViewer and other methods
    to troubleshoot the BlueScreens - top 3 responses (+ 1 other).

    http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/3deab2fa-4000-4136-8c78-a3d22b1db009

    We can analyze the minidumps if make you it available to the SkyDrive or another file
    sharing sites (such as MediaFire). If you have problems to download the copy of minidumps
    for the office or in the Documents folder and download them from there.

    ZIP or download the content of the C:\Windows\minidump

    Use SkyDrive download collected files and after shot/screenshot.
    http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

    ==================================================================

    BCCode: D1 0x000000D1

    Think video drivers especially if it may be others. Refer to the section of driver in my credits
    methods of troubleshooting blue screen below. BIOS, chipset of low level drivers and
    antispyway/antivirus/security programs can also cause this. Check the resolution of the problems and
    When you arrive at the driver and tests of memory sections do reference to generic methods in following
    message and then back to the if necessary troubleshooting tool.

    BCCode: D1 0x000000D1

    Cause

    A driver tried to access a pageable (or that is completely invalid) address while the IRQL was too high.

    This bug check is usually caused by drivers who used a wrong address.

    If the first parameter has the same value as the fourth parameter, and the third parameter indicates a runtime operation, this bug check was probably caused by a driver who was trying to run code when the code itself has been paginated outside. The possible causes for the error page are:

    • The function was marked as pageable and was operating at an IRQL higher (including obtaining a lock).
    • The function call was made to a function in another pilot, and that this driver has been unloaded.
    • The function was called by using a function pointer that was an invalid pointer.


    BCCode: d1 0x000000d1<-- read="" this="">
    * 1210.html? order = votes http://www.faultwire.com/solutions-fatal_error/Driver-IRQL-not-less-or-Equal-0x000000D1-

    =========================================

    Look in the Event Viewer to see if something is reported on those.
    http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

    MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
    TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
    http://www.NirSoft.NET/utils/my_event_viewer.html

    -------------------------------------------------------------------------
    Also this, so you can see the probable bluescreens.

    Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
    http://www.winvistatips.com/disable-automatic-restart-T84.html

    -------------------------------------------------------------------------

    Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
    info that would help. Such as ITC and 4 others entered at the bottom left. And all others
    error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

    As examples:

    BCCode: 116
    BCP1: 87BC9510
    BCP2: 8C013D80
    BCP3: 00000000
    BCP4: 00000002

    or in this format:

    Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
    Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

    It is an excellent tool for displaying the blue screen error information

    BlueScreenView scans all your minidump files created during 'blue screen of death '.
    hangs and displays information about all accidents of a table - free
    http://www.NirSoft.NET/utils/blue_screen_view.html

    BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
    There are other causes.

    You can do without if needed fail or the Vista DVD or recovery command prompt mode
    Options if your system was installed by the manufacturer.

    This tells you how to access the System Recovery Options and/or a Vista DVD
    http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

    You can try a system restore to a point before the problem started when one exists.

    How to make a Vista system restore
    http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

    -------------------------------------------------------------------------

    Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

    Enter this at the command prompt - sfc/scannow

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
    generates in Windows Vista cbs.log
    http://support.Microsoft.com/kb/928228

    The log can give you the answer if there is a corrupted driver. (Says not all possible
    driver problems).

    Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

    How to run the check disk at startup in Vista
    http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

    -------------------------------------------------------------------------

    Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
    keyboard and mouse, as well as of other major device drivers.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    How to install a device driver in Vista Device Manager
    http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

    How to disable automatic driver Installation in Windows Vista - drivers
    http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
    http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

    -------------------------------------------------------------------------

    How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
    quit unexpectedly
    http://support.Microsoft.com/kb/958233

    Troubleshooting, STOP error blue screen Vista
    http://www.chicagotech.NET/Vista/vistabluescreen.htm

    Understanding and decoding BSOD (blue screen of death) Messages
    http://www.Taranfx.com/blog/?p=692

    Windows - troubleshooting blue screen errors
    http://KB.wisc.edu/page.php?id=7033

    -------------------------------------------------------------------------

    In some cases, it may be necessary.

    The Options or Vista recovery disk Startup Repair

    How to do a startup repair
    http://www.Vistax64.com/tutorials/91467-startup-repair.html

    This tells you how to access the System Recovery Options and/or a Vista DVD
    http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

  • How to troubleshoot and resolve the blue screen (STOP: 0x000000F4 (0xFFFFFA800BCF4B30, 0xFFFFFA800BCF4E10, 0 x 000000000000003, 0xFFFFF800031D4460)) questions for new construction

    I just finished a new construction, including Windows 7 Home Premium 64-bit.  Update all the drivers went through, and now I get BSOD.  Initially, I'd get them, after that the system wake up to 'sleep' mode, but this morning I received after you start the computer from the closure.  They are the mistakes STOP F4, and I'm sure that there is a way to fix them, I just need help on where to start.  After a few reboots to check the version of the BIOS and what not, the computer would no longer connect to the internet.
    Here is my configuration:
    CPU: Intel Core i3-3225 3.3 GHz Dual - Core Processor
    Motherboard: ASRock H77M Micro ATX LGA1155 motherboard
    Memory: G.Skill Ripjaws X Series 8 GB (2 x 4 GB) DDR3-1600 memory
    Storage: Intel 330 series 240GB 2.5 "Solid State Disk
    : Fractal Design Arc Mini Micro ATX mini-tower case
    Power supply: Rosewill Capstone 450W 80 PLUS Gold Certified ATX12V / EPS12V power supply
    Optical drive: Lite-On iHAS124-04 DVD/CD burner
    Operating system: Microsoft Windows 7 Home Premium SP1 (OEM) (64-bit)
    Other: 2 x Western Digital Caviar Blue 500 GB 3.5 "7200 RPM hard drive internal

    And here are two mistakes STOP I was able to capture up to now:
    STOP: 0X000000F4 (0XFFFFFA800B938B30, 0XFFFFFA800B938E10, 0 X 000000000000003, 0XFFFFF80002F80460)

    STOP: 0X000000F4 (0XFFFFFA800BCF4B30, 0XFFFFFA800BCF4E10, 0 X 000000000000003, 0XFFFFF800031D4460)

    This was my first computer build and I really enjoyed until the software part; simply too many current intangibles.  A lot to learn and I'm happy to do, but my wife would like a stable computer.

    Original title: how to troubleshoot and resolve problems blue screen for new construction

    Hello

    Bug_Check F4 is generally hard, cables, and associated hard drive controller.

    Since this is a new construction House remove ALL power - reinstall all memory cards and cables (on
    both ends where possible) - actually delete and replace - do not just tight. Make sure heat
    sink and compound are correctly placed and that all lovers of work.

    Check with the ASRock support, their documentation online, the diagnosis and ask in their forum
    for problems known.

    ASRock - Support
    http://www.ASRock.com/support/index.asp

    ASRock - Forums
    http://www.ASRock.com/support/forum.asp

    ASRock - downloads
    http://www.ASRock.com/support/download.asp

    =============

    See this article:

    You receive various Stop error messages in Windows 7 or in Windows Server 2008 R2 when
    you try to resume a computer that has a large hard drive SATA.
    http://support.Microsoft.com/kb/977178

    -----------------------------------------------------------------------------------------------------------

    Resolve errors stop (blue screen) in Windows 7 - has a section for if you can or cannot start Windows.
    http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

    Check this thread for more information using BlueScreenView, MyEventViewer and other methods
    to troubleshoot the BlueScreens - top 3 responses (+ 1 other).

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/sometimes-i-get-a-blue-screen-when-using-IE-8/c675b7b8-795f-474d-a1c4-6b77b3fcd990

    We can analyze the minidumps if make you it available to the SkyDrive or another file
    sharing sites (such as MediaFire). If you have problems to download the copy of minidumps
    for the office or in the Documents folder and download them from there.

    ZIP or download the content of the C:\Windows\minidump

    Use SkyDrive to upload collected files.
    http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

    ================================================================

    BCCode: F4 0x000000F4

    Check and reinstall the cards memory and cables (at both ends where possible) in fact
    delete and replace - do not just tight. On a laptop computer on all you can do is reinstall it
    memory and possibly check the connection/contacts on the hard drive. Memory could
    be the problem, so if you have more than 1 stick swap them in and out to see if the
    problem follows a stick or try the new memory. Antivirus/anti-spyware/security programs
    have been known to cause or have a role in this matter.

    More general patch updates day and low level chipset BIOS drivers and other control
    software.

    Also check the wiring on the hard drive.

    =========================================================

    Bug Check 0xF4: CRITICAL_OBJECT_TERMINATION

    CRITICAL_OBJECT_TERMINATION bug control has a value of 0x000000F4. This indicates that a process or thread crucial to system operation has unexpectedly is released or ended.

    Important info if you received a STOP Code

    If you received a blue error screen, or a stop code, the computer stopped abruptly to protect against data loss. A hardware device, its driver or software might have caused this error. If your copy of Windows is shipped with your computer, contact your computer manufacturer. If you purchased Windows separately from your computer, Microsoft provides support. To find contact information for Microsoft or the manufacturer of your computer, Contact Support.

    If you have experience with computers and try to recover from this error, follow the steps in the Microsoft article solution STOP (blue screen) errors in Windows.

    These actions could prevent a mistake like this does not happen:

    1. Download and install updates for your computer from Windows Update device drivers.
    2. Scan your computer for computer viruses.
    3. Check your hard drive for errors.

    CRITICAL_OBJECT_TERMINATION parameters

    The following settings are displayed on the blue screen.

    Parameter Description

    1

    The Terminal object type:

    0x3: Process of

    0x6: Thread

    2

    The endpoint object

    3

    The name of the process image file

    4

    Pointer to a string ASCII containing an explanatory message

    Cause

    Several processes and threads are necessary to the functioning of the system. As they are completed for some reason, the system can no longer function.

    BCCode: F4 0x000000F4<-- read="" this="">
    * 1241.html http://www.faultwire.com/solutions-fatal_error/A-process-or-thread-crucial-to-System-Operation-has-0x000000F4-

    ==================================================================

    Look in the Event Viewer to see if something is reported on those.
    http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

    MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
    TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
    http://www.NirSoft.NET/utils/my_event_viewer.html

    -------------------------------------------------------------------------
    Also this, so you can see the probable bluescreens.

    Windows Vista restarts automatically if your computer encounters an error that requires him to plant
    (also, Windows 7 and Windows 8).
    http://www.winvistatips.com/disable-automatic-restart-T84.html

    -------------------------------------------------------------------------

    Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
    info that would help. Such as ITC and 4 others entered at the bottom left. And all others
    error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

    As examples:

    BCCode: 116
    BCP1: 87BC9510
    BCP2: 8C013D80
    BCP3: 00000000
    BCP4: 00000002

    or in this format:

    Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
    Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

    It is an excellent tool for displaying the blue screen error information

    BlueScreenView scans all your minidump files created during ' blue screen
    of death "crashes and displays the information about all crashes in one
    Table - free
    http://www.NirSoft.NET/utils/blue_screen_view.html

    BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
    There are other causes.

    You can do mode if necessary safe or the Vista DVD command prompt or
    Options recovery if your system is installed by the manufacturer.

    How to start on the System Recovery Options in Windows 7
    http://www.SevenForums.com/tutorials/668-system-recovery-options.html

    You can try a system restore to a point before the problem started when one exists.

    How to do a system restore in Windows 7
    http://www.SevenForums.com/tutorials/700-system-restore.html

    -------------------------------------------------------------------------

    Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

    Enter this at the command prompt - sfc/scannow

    How to fix the system files of Windows 7 with the System File Checker
    http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
    generates cbs.log Windows Vista (and Windows 7)
    http://support.Microsoft.com/kb/928228

    The log can give you the answer if there is a corrupted driver. (Says not all possible
    driver problems).

    Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

    How to run the check disk at startup in Windows 7
    http://www.SevenForums.com/tutorials/433-disk-check.html

    -------------------------------------------------------------------------

    Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
    keyboard and mouse, as well as of other major device drivers.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    How to install a device driver in Vista (also Windows 7) Device Manager
    http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

    Stop Windows 7 to automatically install device drivers
    http://helpdeskgeek.com/Windows-7/stop-Windows-7-from-automatically-installing-device-drivers/

    How to disable automatic driver Installation in Windows 7 / Vista
    http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/

    Turn off Windows Update Device Driver search prompt in Windows 7 / Vista (for professionals,
    Ultimate and Enterprise)
    http://www.AddictiveTips.com/Windows-tips/disable-Windows-Update-device-driver-search-prompt/

    -------------------------------------------------------------------------

    How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
    quit unexpectedly
    http://support.Microsoft.com/kb/958233

    Troubleshooting Vista Blue Screen, error of JUDGMENT (and Windows 7)
    http://www.chicagotech.NET/Vista/vistabluescreen.htm

    Understanding and decoding BSOD (blue screen of death) Messages
    http://www.Taranfx.com/blog/?p=692

    Windows - troubleshooting blue screen errors
    http://KB.wisc.edu/page.php?id=7033

    -------------------------------------------------------------------------

    In some cases, it may be necessary.

    Startup Options recovery or Windows 7 disk repair

    How to run a startup repair in Windows 7
    http://www.SevenForums.com/tutorials/681-startup-repair.html

    How to start on the System Recovery Options in Windows 7
    http://www.SevenForums.com/tutorials/668-system-recovery-options.html

    How to create a Windows 7 system repair disc
    http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

    How to do a repair installation to repair Windows 7
    http://www.SevenForums.com/tutorials/3413-repair-install.html

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

  • How to read the Drwtsn32.log and user.dmp files

    I'll have the blues of the blue screen and need to read these files to help me find the problem.

    I found the problem

    NVIDIA GeForce4 MX 420 with AGP8X

    as he tried to update last update driver was, but wouldn't Toad. I'm incotact with the support of tec awaiting a response

    Thank you for answer

  • How can I fix the blue screen that appears after the Welcome screen and also the compaq screen changed after windows update the or to the 03/23/11

    March 23 windows set to date. a failure and then managed. After that, the compaq screen has changed and the blue display lights for a little after the Welcome screen.

    Hello

    If you think the update caused the blue screen then uninstall it to check.

    Control Panel - Windows Updates - lower left Installed Updates - uninstall or change

    Or

    Remove an update
    http://windowshelp.Microsoft.com/Windows/en-us/help/182043da-fc3e-4220-AFBC-d9b09f2b2a1a1033.mspx

    Or

    The problems with the removal of updates
    http://windowshelp.Microsoft.com/Windows/en-us/help/5a319824-5cb5-493d-9151-9a97d0f565b61033.mspx
    Or

    How to uninstall updates in Windows Vista
    http://www.vista4beginners.com/how-to-uninstall-Windows-Vista-updates

    Disable or hide optional updates on Windows Vista
    http://www.howtogeek.com/HOWTO/Windows-Vista/disable-or-hide-optional-updates-on-Windows-Vista/

    ==============================================================

    If not, remove the updates help then we can troubleshoot the BlueScreens.

    Check this thread for more information using BlueScreenView, MyEventViewer and other methods
    to troubleshoot the BlueScreens - top 3 responses (+ 1 other).

    http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/3deab2fa-4000-4136-8c78-a3d22b1db009

    We can analyze the minidumps if make you it available to the SkyDrive or another file
    sharing sites.

    ZIP or download the content of the C:\Windows\minidump

    Use SkyDrive to upload collected files
    http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

    -------------------------------------------------------------------------

    Also this, so you can see the probable bluescreens.

    Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
    (also Windows 7)
    http://www.winvistatips.com/disable-automatic-restart-T84.html

    ===========================================================

    Check out these utilities to see if information may be collected:

    It is an excellent tool for displaying the blue screen error information

    -Free - BlueScreenView scans all your minidump files created during "blue screen of death," collisions
    and displays information about all accidents of a table.
    http://www.NirSoft.NET/utils/blue_screen_view.html

    -------------

    MyEventViewer can be verified at the time of the blue screen (BSOD) within a second or so of the
    time of the BSOD to provide more information about the possible cause - see TIP.

    MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
    TIP - Options - Advanced filter allows you to see a period of time instead of the whole of the record-
    Set it for a bit before and after the time of the BSOD.
    http://www.NirSoft.NET/utils/my_event_viewer.html

    ------------

    AppCrashView - free - a small utility for Windows Vista and Windows 7 that displays the details of all the
    application goes down has occurred in your system. The information breaks down is extracted from the .wer
    the files created by the Windows Error Reporting (WER) of the operating system component of each
    time that an accident has occurred. AppCrashView also allows you to easily record the list of accidents to
    text/html/csv/xml file.
    http://www.NirSoft.NET/utils/app_crash_view.html

    I hope this helps.

Maybe you are looking for

  • HP 110-414: Hp 110-414 Win10 upgrade

    All upgraded to Windows 10 on the 110-414 hp you have problems or bugs with it and it runs well on it and you think I should update

  • "Display will turn off.." ELPH 160

    While I'm trying to focus on a topic why my Canon ELPH 160 displays the message: "screen turns off. Any operation reactive'? I can't concentrate with a black screen, and tapping a button disrupts the development. I could understand this if the batter

  • Abandoned WebWorks?

    Thus abandoned WebWorks or just put development on hold? Asking the reason is that the latest version uses obsolete plug-ins and former Cordova style of their designation. This means that update those, to remove the 'old' and install the most recent

  • Delete empty pages

    Hi experts,I would like to delete a document all empty pages.What is the best solution? By storythread or pageitems or something?A storythread can contain one or more empty page with same tagnameEmpty page = the current page contains only empty text

  • Activate the social sharing for DPS APP company

    HelloMy client is trying to use social sharing feature (part of the article on someone's facebook wall) in the application of business for some reason any. I tried to build the iOS app to the APP generator business and social sharing feature didn't w