Re: Lost - recovery disc how to recover the satellite A100-649 without a disk?

Similar Questions

• How to recover the Satellite A100 without recovery disk

  Hi all

  I'm trying to restore my laptop A100 settings * without * a restore CD via pressing a sequence of buttons during startup (which must launch the recovery on the hard drive partition).

  It is really unfortunate, I know it can be done as I did before butI for the life of me forgotten what was this key sequence I can't find the article I stumbled initially on!

  I've scoured the web looking for this key sequence and all the proposed solutions, I fell on do not seem to work.

  Unsuccessful attempts so far:
  -Press and hold 0 power
  -various suggest 'F' keys: F1, F8, F10
  -now the delete key

  Note: I guess it may be worth mentioning that pressing F8 actually take me on-screen "start options advanced windows" but I don't have any recovery options.

  Yeh Yes, I'd * extremely * grateful if someone could point me in the right direction here because it makes me crazy... the fact that I've done this before, it that much worse!

  Post edited by: Atta

  > I'm trying to restore my laptop A100 to the factory without the recovery CD settings via pressing a sequence of buttons during startup (which must launch the recovery on the hard drive partition).

  As I know the A100 series has not been fitted with the recovery of HARD drive partition!
  And so I doubt that any combination of keys will start the partition recovery!

  So you only chance to recover the laptop is to take the recovery disk, then boot from it.
  You can also try to install the disk Microsoft Windows operating system and then could install the drivers of Toshiba on the pilot site of Toshiba!

  See you soon

• How to recover the Satellite A10?

  I have a Satellite A10.
  After insering the recovery disc 1 a tab instead of tab C. Now I'm back and I have no idea how to do to return to my homepage or drive D to continue the recovery. I have no idea how to use BACK.

  Hello

  To be honest I m a bit confused
  The recovery procedure is very easy and you n t need to do anything in the BACK.

  In order to recover the laptop, you will need to boot from the recovery disc and should follow the instructions on the screen.

  Satellite A10 series is old and the recovery procedure is different in the new procedure, but you should certainly receive some messages how product

  I recommend repeat get back again;
  Put the right recovery disk in the drive and boot from the CD by pressing the C key. You can use F12 and then you may choose the CD/DVD drive in the boot menu

• How to recover the Satellite L30-140 - I lost the recovery disk

  Hello

  I have a Satellite L30-140 and I want to recover the windows on that.
  I lost the dvd recovery-. -.
  Is there a method to recover? as acers Alt + f10 recover menu?

  Thanks for your help :)

  Hello

  You need the recovery disc, either the clean Microsoft Windows disk in order to install the operating system gain.
  L30 being a little older, I doubt that you can order the recovery disk
  That's why you need a Microsoft Windows CD!
  You will need to buy this CD if you are not the owner of the Microsoft Windows CD.

  Welcome them

• How to recover the Satellite L305D without recovery disk?

  Hey guys

  I bought my Toshiba Satellite L305D half a month ago and now my computer works do not.
  So I m thinking about restoring my laptop when I bought it first, but you know when I bought it, it doesn t come with any disk recovery so I put t know what to do.

  Is knowledge how laptop computer recovery without a disk?

  I am new to this problem
  So please if you know how to do
  Note please the specific details to show me how to

  Thank you!

  Hello!

  First of all, you should check the user manual. There you can find all the details on how to recover a Toshiba laptop.

  In any case, if your laptop came without recovery disk you can create one using the Toshiba recovery disc creator. That's why you need one or two DVDs and then you have factory on a DVD.
  If you created the recovery disk, you can boot from it and follow the instructions on the screen. Windows will be reinstalled, and you get back to factory settings.

  But you can also recovery a Toshiba laptop without recovery disk. So go to the F8 advanced boot menu and choose fix my computer. Now, you can choose the Toshiba Recovery option and follow the instructions on the screen.

  If you have any other questions, you can search a bit in the forum. You will find a sufficient number of threads on the recovery procedure.
  In addition, you must check this document:
  [How to recover a Toshiba notebook with the HDD recovery procedure? | http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=58]

  Good bye

• How to set the Satellite A100-596 to factory without Recovery DVD settings

  I gave my young niece of my old laptop A100-596 for Christmas.
  It worked perfectly on Christmas Eve I packed it upward, in packing of origin, but at the time my niece connected on it has lost 40 GB of data among the drives C and E - everything E drive and the dvd drive had stopped working!

  Now, no one has any explanation for what is happening, nor any reason why a laptop that has performed flawlessly for 18 months would suddenly lose 3/4 of the data on it, but whatever!

  So now I want to restore it to factory, but without a job settings dvd, how? I have all disks involved in perfect condition!
  In addition, I want to fool proof so it can be retrieved in case the person or nothing damaged, this time he cannot repeat the action.

  So I think that if I partition the hard drive so that the recovery of files is accessible by me with a password, which I will NOT share with any of the children, if they bumble once again, then I will be able to recover.

  Moreover, even restoring the system files have disappeared, so I can't even it roll back to a working condition!

  Any advice?

  Hello

  You wrote so much and I think it's the best we descuss all questions slowly.

  I don't know what you mean under non-working DVDs. Is the drive defective optical drive or media DVD is not readable?

  Anyway, the fact is that if you want to have the factory again settings you must install operating system using Toshiba DVD recovery. If you don't have it you can do clean OS installation using the Microsoft DVD facilities. All the necessary drivers, tools and utilities are available on the Toshiba support under http://eu.computers.toshiba-europe.com page > support & downloads.

  When you use recovery media Toshiba HARD whole disc will be erased. Absolutely everything. All data and partitions.
  What you want to do with recovering data unfortunately will not work. You cannot copy the recovery image and start it from the other partitions. Not on Satellite A100.

  On new A300, something like this is possible because the recovery image is stored on the second partition in folder HDDRecovery.

  If you have any other questions please let us know.

• Re: How to recover the Satellite L30-10s?

  How can - I make my satellite L30-10 s to exit the restore box settings?

  Hello

  I think that HDD recovery isn't possible since this is a very old notebook and I guess for this series, HARD drive recovery were not available.

  So you have only one option to retrieve the computer laptop back to factory settings: you need the recovery disc.
  If you n t have this disk, you will not be able to put the computer laptop back to factory settings. I think that its no longer possible to order the recovery disk because of the age of the laptop.

  So what to do?
  You can use only a clean installation of Microsoft disk in order to install the system.
  The essential drivers or tolls are available on the page of the Toshiba UE driver.

• How to restart the Satellite 5200 801 without using the recovery disk?

  Hello
  I haven't used my Satellite 5200 801 for awhile and now it does not start. That's what I have on the black screen:

  Intel® Boot Agent Version 4.1.04
  Copyright © 1997-2002, Intel Corporation
  PXE - E61: Media test failure, check cable of
  PXE - M0F: Exit Intel Boot Agent.
  Insert system disk in drive.
  Press a key when tready.

  I have the product recovery disc, but which will erase all existing data and rebuild. Is there a way to boot my PC without the use of the recovery disk?

  Thanks for any help.

  > PXE - E61: Media test failure, check cable of

  This message means that laptop tried to boot from LAN.
  Given that this was not possible the PXE - E61: Media test failure, check cable appeared

  I guess that the HARD drive is defect and therefore, the laptop won't boot from the internal HARD drive.
  In this case also your internal data on the HARD disk are lost.

  But to be100% sure that you can remove the laptop HARD drive, could use a drive enclosure HARD 2.5 to connect the HARD drive to another computer just to check if you would be able to access data on the HARD drive

• Re: Need help to recover the Satellite A100-522

  Dear all

  I have a laptop and when I turn on found operation system error apears.

  I tried Recovery, but when I want to preaze in the first stage.

  Also I wanted to do with new XP installation but I can't delete the C drive and install new windows.

  I was wondering if you help me

  Hello

  If you want to retrieve the laptop using the Toshiba recovery disc then it must put the disc into the CD/DVD player and have to boot from that disk.

  You can press the F12 key while turning the power on and the start menu will appear.
  Then, choose the ODD (CD/DVD drive) as a source of start-up and installation should begin.
  Then follow the instructions on the screen.

  You can also use the original Windows CD for installing the OS.
  You should boot from the XP CD, and you will see that the installation program will start.

  But buddy note; If you will not be able to start the installation, a HARD disk failure is possible. I received a message that the operating system is not found on the HARD drive and this problem has been linked to the failure of HARD drive.

  In this case the drive HARD shoul be replaced

• I lost my private, how to recover the navigation

  Under Tools, I can choose private browsing, but nothing happens after that. I had the incognito for years, then suddenly... nothing

  Hello

  Exactly what he kind of lost, in the case of bookmarks, so you can recover your bookmarks.

  Firefox automatically creates backups of your bookmarks, which can be useful if your bookmarks are lost or missing. To retrieve them, follow the instructions below.

  1. Use one of the following methods to open the bookmarks library window:
     • Click the Firefox button to open the menu and click on bookmarks.
     • Click on the menu of bookmarks and click show all bookmarks.
  2. At the top of the library window, click on the "Import and backup" menu and select restore.
  3. Click on the date of the backup of bookmarks you want to recover.
  4. In the new window that appears, click OK.
  5. Your bookmarks in the selected date should now be restored.

  For more information, see the article restore bookmarks from a backup or move them to another computer . For alternatives, see the article of recover lost or missing bookmarks .

  This solve your problems? Please report to us!

  Thank you.

• My hard drive crashed, I have my key of win 7 but no disc how to recover the software?

  Hello, my hard drive crashed and can't access my pc so I bought another one, but I don't know how I can install win7 to my new hard drive, I tried to retrieve the windows product key with software, but it did not work, what should I do?

  Microsoft also does Digital River for Windows 7 downloads. Windows 10 will soon be out, and you are eligible for a free upgrade of your Windows 7 OEM license.

  Know you can not install Windows 7, so the best thing for you to do is to install Windows 10 10130. It's beta software, but it is very stable. You will be able to use Windows 10 Insider 10130 as a springboard to Windows 10 RTM outside at the end of next month.

  See here for instructions on downloading Windows 10 10130 x 64 .iso Insider and prepare the USB support:

  http://dellwindowsreinstallationguide.com/download-Microsoft-Windows-and-Office/Download-Microsoft-Windows/download-Windows-10-technical-preview-ISO/

• How to recover the Satellite L to get back on Vista?

  Hiya,

  My son has recovered a part a little Trojan, it only would not let us go in safe mode or restore. The only thing we could do was to completely clear all & use the disks to reinstall again. Simple normally... but this time it wont run something else that XP now, I tried 5 times to reinstall from backup disks to return to Vista and it freezes just the farthest, I managed to get was the installation of updates, but it froze once again to 25% on the portion of the Net framework update.

  His market on XP at full speed now, but if I try to put Vista slot via the backup of disks it takes about 5 minutes so he can perform an action, slow is not the word.

  I want to just go back to Vista and now completely lost, why used it keep running Vista?

  Anyone any idea?

  Hello

  If I understand your question; you have installed Win XP on the laptop, but you want to install Vista, but Vista freezes and is slow is it good?

  What cell phone do you have?
  As far as I know the books supports the new SATA controller.
  This means that you need the SATA driver to install the Windows operating system.

  You can change the compatible SATA mode in the BIOS. This will allow you to install the Vista and other operating systems Windows without the SATA drivers, BUT this will slow down the performance of the HARD disk!
  This is perhaps the reason for your question

• How to recover the Satellite A200-1KZ?

  Hello. I m from Spain. So excuse me for errors I could do in that language.

  Well, I bought this phone and I m very happy with it. But recently I had a problem.

  The issue is that I m a user of linux but use windows to play games and similar. The fact is that I was almost four or five months without getting into windows and... I Don t understand this, but... I forgot my password lol.

  I had tried every password I use, but no one worked. I could get into windows with different account unprotected, administrator privileges, so I can uninstall and install programs. I just make a copy of all my data from my user security.

  Difficult, I have administrator privileges, I use to have problems; for example Mozilla Firefox crashing.

  Take the County that I use this laptop for... probably six or seven years. So I have a lot of FP programs who use Don t actually and I think that the best I can do is to reinstall.

  When I bought the pc, they told me that the pc have a hidden partition (winRE) with 2.0 GB more or less. And when I use the Food Center (in windows vista) I see that partition, but disabled.

  Stand-alone box, with documentation, is, more or less 800 km. It probably contains a cd. The question is if you know how long that model have an indeed hidden partition (and restoring that) or I have to use the cd, thanks and again, I apologize about the errors.

  You're right about the partition recovery or recorded image recovery on the HARD disk but the problem is that you can't access.
  All you can try is again recovery disk order on https://backupmedia.toshiba.eu/landing.aspx
  Others and for me the best solution is to install own Win7 32bits version. It works very well and stabile on this old A200.

  If you need help with this let know us.

• How to recover the Satellite Pro M70 using the RIS (starting at LAN)?

  Hello, we are trying to get some 6 M70 of them to build via ris but they keep trapped say Setup is inspecting your hardware.

  We tried the latest maps on the server ris and many different things.
  Bios update laptop computers and update the PXE boot room with no joy.

  What is the answer?

  Thank you
  Richard

  Hello

  At first, I must say that on this forum, you will find some interesting discussions on installation of RIS. Use the RIS services as search terms in the advanced search option and check the results. Regarding the installation of RIS, you can also find some info under http://support.microsoft.com/kb/304992

  A question: have you done your own recovery to the installation image?

• How to get the VM with or without thin disk in VC Server

  I need to get my Vm list all in my server VC who have the fine disc and one of them is not a thin disk.

  I do not understand it can be done in CLI power and I have Vmware Vsphere CLI installed power. I also find some scripts on the net, but I don't know how to use them

  Please suggest step by step how to run these scripts and where console as well?

  Thank you

  Deepak

  If you have the names of these servers in a CSV file with this provision.

  Name
  server1
  server2
  ....
  

  You can use a script like this

  $report = @()
  Import-Csv "C:\My-Csv-file.csv" | %{
       $vm = Get-VM $_.Name
       $vm | Get-HardDisk | %{
            $row = "" | Select VMname, Folder, HDname, HDformat
            $row.VMname = $vm.Name
            $row.Folder = (Get-View $vm.FolderId).Name
            $row.HDname = $_.Name
            $row.HDformat = $_.StorageFormat
            $report += $row
       }
  }
  $report | Export-Csv "C:\VM-disk.csv" -NoTypeInformation -UseCulture
  

  ____________

  Blog: LucD notes

  Twitter: lucd22