Re: Portege R100-11Z no audio signal through headphones/mic not taken, via its USB OK

Similar Questions

• No audio signal through HDMI (dv9700t CTO)

  HP Pavilion dv9700t CTO Entertainment Notebook PC / Windows Vista 64-bit

  I put the audio device by default for the device "Realtek Digital Output. I have no sound.

  I've updated the audio drivers on the HP support site. Still no sound via HDMI. (the microphone quality was reduced at the point of being worthless)

  I have updated the drivers with drivers from the site Web of Realtek. Still no sound via HDMI. (I found micro feature)

  The box of bolt that I'm trying to connect to indicates that there is no audio signal passed him from this source (my laptop). I even tried to connect directly to the tv. Which doesn't work anymore.

  Its almost as if there was no link between the audio and HDMI port.

  

  Message edited by Slybo on 12/23/2008 06:22
  Message edited by Slybo on 12/23/2008 06:24

  I have dv9758ca and I have the same problem. No sound with the yamaha receiver. I sound with my LG TV and I tried with an Onkiyo recevier and it worked.

  Once I had the sound on the yamaha (was a flook). the image was running on the TV and the screen of the computer (which is not normal) at the same time. then I concluded that the problem is the HDCP protection. the yamaha recevier is HDCP.

  I've still did not know what the solution is, I just wanted to share my experience

• Portege R500-11Z: how to use the external mic and hear the internal speakers

  We have a Portege R500-11Z running XP and want to use Skype with an external table microphone and the internal speakers.

  When connect us the microphone to the Jack MIC the Portege, built-in speakers cut out!

  How to use an external mic and still hear the internal speakers?

  Hello

  > When connect us the microphone on the Portege, built-in speaker MIC Jack cut!
  Are you sure you used the microphone port and no headphone port?

  Have you checked your settings Audio from Skype?
  There is an option called ring through the speaker too or something like that.

  Please also check the Realtek HD audio Manager in Control Panel.
  There is a tab called Audio i/o.

  Usually, you can change the connector settings, by clicking on the small key-tool icon.
  Disable the option called Mute rear output when plugged headphones before

  As you can see is called headset and not so I m confused a little bit why the speakers are turned off when you connect an external microphone.

  By the way; There is also a tab called micro.
  Check if the two options that reduce the echo and noise are OFF

• ProBook 6540 b: no audio signal through Displayport

  The Displayport video output on 6540 b does support audio? If so, how I would allow sound through displayport through the windows? I was not able to get sound to participate in one of my TVs that has DisplayPort inputs.

  Hello:

  It's possible this is the case.

  There are a few PCs that do not support audio out of the view port.

  I was hoping that it works.

  What would you say to the manage audio devices in the hardware and sound section in the control panel?

  You see two audio devices listed?

  The laptop speakers would be the IDT audio and if you see an Intel HD audio device, for the display port.

  The only suggestion I can offer would be to connect to a display port, select the Intel HD audio device in the window and see if it works.

  If you do not see the two audio devices listed there, so I doubt he's has supported audio out of the view port.

• EliteBook 8540w: no audio signal through DisplayPort

  I'm trying to connect my laptop to my TV through DisplayPort. I bought an adapter DisplayPort to HDMI cable. The image is fine, but no audio is coming through. I don't see TV as the device in the sound Panel, and I have only (not Intel) IDT audio control panel.

  Any ideas?

  Solved.

  It was in the latest versions of the NVidea driver. I uninstalled the driver and then installed the driver that was originally shipped with the laptop (Oct 2010 driver version). The TV came immediately as playback device and its working now.

• Audio playback through headphones and speakers

  Headphones or speakers in windows 7, it cannot have them both?

  Looked at other issues, nothing seemed close.

  My machine has dual boot, Windows 7, XP and Vista ultimate and now XP. In XP and Vista I have the speakers and headphones plugged together, playerd noise, so I could use one or the other by plugging them in front and back taken audio.

  This allows me to play during the day with speakers, and then at night with headphones and no round reaching under my desk to remove the cables.

  Now I use windows 7 and many other issues I have with it, I can't play with speakers or headset until I went through a lot stupid click on deactivate one or choose the other as a default value. Why this has been changed in windows 7 after Vista, it seems totally useless logic. I can turn off my speakers with the power button and get the helmet works. Now, I'm either or. So my new IR headphones are wasted. Please, someone tell me there is a work around?

  It's little interference silliness like this that give me want to stay under XP.

  Much thanks in the meantime someone has found a work around.

  I have my Jabra GN9350 both my speakers for computer, audio playback at the same time. :)

  Here's the trick (and it is verified on 3 other systems Win 7):

  (1) R click on your speaker icon, select "Recording Devices" (if you have the sounds dialog box to the top, it's the 2nd 'Recording' tab)

  (2) click on R in the white space, make sure that the TWO "show disabled devices" AND "show disconnected devices" is checked.

  (3) * now, this step will take some thought for each computer used: on my laptop (HP Elitebook) I get a "Stereo mix" device, ACTIVATE this device.

  4) click on properties, click on the "Listen" tab

  (5) check the box 'Listen to this device', also change the drop-down list below 'read through this device' to be your second audio device

  -To check that you have done this correctly, go back to the tab of the dialog box sound reading, you should now see two of your audio devices showing green graphics small displacement.

  Here are the specific parameters that I have on my laptop, maybe this will help you with your settings:

  Speakers - GN9350 (by default the communications device)

  Speakers - SoundMAX Integrated Digital HD Audio (default device)

  Feature 'Listen' stereo Mix - point this device on my GN9350 headset.

  Paul

• CC: Just Audio export through Renderlist does not work...?

  The WAV or MP3 file has no Audio in it...

  It works with the Media Encoder.

  AE CC 2015.0.1

  Sorry, I was on Page 2 when I got on the Forum. I see I'm not the only one with this problem.

  incredibly, this is a Bug. Comon Adode...

• Pavilion DV4: Laptop plays sound through headphones but not by internal speakers

  Audio was working fine on my laptop, when suddenly the laptop would not play sound with internal speakers.  If I plug in headphones sound is fine.  Execution of control panel of configuration/sounds shows 'Speakers and dual headphone - IDT High Definition Audio CODEC' enabled and set as the default device, as well as "independent double headphones" (enabled by default but not) and 'SPDIF (Digital Out via HP docking station)' disabled.  What can be wrong?

  Cure the problem by uninstalling the CODEC driver, then restart Windows then reinstalled, and now things are ok again.

• Audio works with headphones, but not the speakers

  Hello, I have a DELL XPS17.  The sound works fine with headphones, but no sound when the headphones are disconnected.

  Note that I had the opposite problem (its good speaker, but no helmet) and then updated the driver.  Once the new driver has been installed, the problem was reversed.  Very strange: Pei

  Last driver installed is Audio_RLTK_W7_A05_Setup-J3VMR_ZPE

  Thanks for your help!

  Hello. You can test your speakers by running test audio fast ePSA or PSA tests.

  You can test the audio driver by opting for the native Windows audio driver. If you get the same symptoms with the native driver, then you can exclude a bug in the driver from Realtek. This Realtek driver has been around for awhile now and has no bugs that I know.

  • 1. open Device Manager (found in the Control Panel, or type devmgmt.msc in the search box).
  • 2. develop the 'audio controllers, video & game' and right click on "Realtek High Definition Audio".
  • 3 Select this option to "Update driver software".
  • 4. click on "Browse my computer for driver software".
  • 5. click on "Let Me pick from a list of drivers on my computer".
  • 6. put the "Show compatible hardware" check box if not already checked.
  • 7. in the list of devices, click on 'High Definition Audio"(native driver).
  • 8. click on "next".
  • 9. in the update driver warning box, click 'Yes' (the driver).
  • 10 restart the portable computer if you are prompted. If not invited, so no need to restart.
  • [To return to the Realtek driver, do it again but reverse steps 2-7 names].

  If the speakers and the driver to pass the tests, you might have failed to sense pin into the headphones Jack, explained in the FAQ of Jack for headphones.

• Portege R100: Bluetooh/WLAN 802 .11b/g Mini pCi card Combo available

  Hello

  does anyone know of a Mini-PCI solution, which combines a b/g WLAN Card with Bluetooth which is compatible with the R100?

  My new laptop has a bluetooth connection and a nice combination of WLAN/BT integrated in the R100 would be also cool that the R100 is. There are a few Combocards on eBay that are Mini-PCi cards, but I don't know if "mini-PCI" is a standard for all Mini PCi cards adapt the R100...

  Concerning

  Christian

  Hmm, I searched a bit for some information on the Portege R100 series and it seems that BT is not available and not extensible. This would mean that there is no room for the internal minPCI BT module.

  The WiFi network is available but not BT ;(

  In my opinion, you need to use an external solution such as a stick USB BT.

  Best regards

• HP ENVY Notebook PC m6: no audio output to headphones

  Audio of the speaker works fine. Headset does not any audio signal. Speakers do not play when the headphones are connected, as they should.

  I couldn't find a page of official troubleshooting for this problem on Windows 10.

  Tried troubleshooting from another thread, and a hard reset seemed to have done the trick

• His record game, I can get sound through headphones

  I can't get sound through headphones and not on the computer

  First of all, what PC model do you use?

  Desktop or laptop computer?
  You can try to check what audio output device is set as default
  To do this, right-click on the Volume icon control near the clock
  Choose playback devices in the list
  If there is a speakerphone option, select it and click on set as default.
  It would also be possible that you need updated for your sound card drivers.
  or if it's a desktop PC. It cannot have a built-in speaker. Thus, headphones or external speakers might be your only option.

• Portege R100 and WUXGA(1920x1200) external LCD display

  I bought Dell 24 inch wide LCD display.

  I thought that my portege R100 can support the resolution 1920 x 1200 because its maximum resolution is 2048 x 1536, but it's not. TT

  Graphics chip is trident cyber xp4.

  I already tried to use software PowerStrip, but it did not work for the chipset graphic trident.

  Is it possible that I can use the resolution of WUXGA(1920x1200) using my portege R100 as regestry change or what ever?

  Hello

  I found the info that 1600 x 1200 is a resolution supported max for Portege R100. As much as I know there no way to change this through any changes to the registry. As you know the performance of the graphics card can not be changed.

  Good bye

• Portege R100 - restore the system software

  I have a portege r100 that has been absent for repairs three times in the last two months. He has just returned to me and now blus screens through startup. I guess I now need to rebuild the operating system but have only a USB CD drive. I contacted the support help line which can not tell me where I can get a CD PCMCIA drive to rebuild the laptop (I have the CD). Any ideas on:
  -Where to get a CD player (in the United Kingdom)
  -Otherwise, how to perform the task.

  Thank you

  Hello

  I found this Toshiba document:
  http://support.toshiba-tro.de/KB0/TSB5100S70004R01.htm

  You will find a compatible readers and supported for R100.
  I recommend seeing for readers of this and find an online store that sells players.
  The other possibility is to order these parts from the Toshiba service partner.

• Portege R100 - how to install after Exchange of HARD drive?

  Hello world
  I'm new to this forum and I want to know exactly where I'm wrong. I have this portege r100 laptop and the hard drive gave a few days ago. Because I am a novice when it comes to computers, I left the laptop with an engineer, that I found on Kijiji.
  Unfortunately, the engineer could not load any operating system on it. I go through this forum and loads found useful answers, but alas, still the same problem.
  Could someone guide me in the right direction. I would be really grateful that I have exams coming next week and really need the laptop.

  I don't have any CD-ROM compatiable only an external floppy drive.
  I tried to install using the windows startup disk (x 6 downloaded from the microsoft Web site), but after the 6 disc it asks me 3 options.

  1. press ENTER to install
  2. recovery console option of
  Output 3.F3

  When I press on enter is not superimposed my cd rom which I figured out is not compatiable. If I leave the connected cd rom it says unmountable boot disk. It gives me a bsod. Is there another way, I could install the operating system using only the FDD.
  I'd appreciate it really all the help of the experienced members of this forum.
  Thank you.

  First of all, you can not use any external CD/DVD drive... you must use a compatible and recommended by Toshiba.

  Secondly, I you could try to connect the HARD drive to another computer using the USB caddy.
  Then copy the i386 to the HARD disk folder.
  Then, you can run the winnt.exe file to start the Setup program.

  Once configuration is complete plug the HDD to the Portege and tries to start
  It is only theory, but maybe it won't work