Re: Problems with the hard drive on a Satellite A200

Similar Questions

• Satellite A200-1AE (PSAECE) Vista has detected a problem with the HARD drive

  I have problem with my mass storage device, or else I think it's this feature that I get this error message when I start my computer [(photo de Massage de l'erreur) | http://img513.imageshack.us/img513/1059/errorxd5.jpg] and I think it has something to do with that [(Image in Link) | http://img132.imageshack.us/img132/2703/divicemanagerax9.jpg]

  I don't know which driver download for this problem.
  If anyone can help it will be much appreciated. I am running windows Vista x 86.

  Hope helped photos

  Hello

  The first error message said nothing; He only says that something is wrong on the HARD drive.
  Why you n t pres the button Don t ask me once again this problem?
  It seems the message again using this option?

  On the second picture, I see that your Intel Matrix Storage Manager has not been installed on your Vista 64 bit OS.

  On the European driver Toshiba page, you will find the 64 bit Vista drivers. Please download the Intel Robson Package from this site and install it. Robson package includes Intel Matrix Storage Management Utility for the management of your local storage space.

  Check it!

• A problem with the hard drive of your computer

  Windows is not able to open a file on the hard drive of your computer. This could be a temporary condition that may disappear after you restart your computer, or it could be a more serious problem with your drive hard or its driver. I tried to restart my computer, I ran the hard drive error checking, nothing seems to help. Please advise?

  Hello

  Go to the website of your computer manufacturer > find specifications of hardware in your computer (hard drive) > access the Web Hard Drive from the manufacturer site > download their diagnostic software > make a Bootable disc > test your hard drive.

  See you soon.

• Problem with the hard drive on the computer.

  Hello

  my hard drive is 500 GB, but my hard drives are less than 100 GB

  I want to increase my hard drives storage

  So, what should I do?

  One who partitioned the drive had little idea about what they were doing.

  You have a spare TWO HUNDRED eighty THREE GB unallocated at the end of the training. This is the rest of the space.

  Use a partition manager to absorb space unallocated in the existing partitions.

  Aomei is as good as no matter what...

  http://www.aomeitech.com/aomei-partition-Assistant.html

  Merge unallocated with E drive space by selecting resize them...

  Then resize D space e administration until E is that it is currently...

  Then resize C until the D is about the same size as e...

  The above will take time to complete, and you should make a backup of all data before you begin...

• Problem with new HARD drive and Qosmio Player installation

  Hi all
  I hope someone can help, I had my Qosmio for 2 1/2 years now and recently had a problem with the hard drive. I decided to replace the hard drive, because it was the fastest solution. The problem I have now is that I can't receive TV on media center. I tried to install qosmio player at the disk to see if it made any difference, but when I run the provided recovery disc software tells me that there is not enough disk space! The laptop came with a 60G hard drive and the new HARD drive manufactured by the same manufacturer is a 150 GB, can someone help me out with this would be appreciated.

  Thank you
  ED.

  Have you tried to install Qosmioplayer initially, then on operating system? If I remember well, on this first portable Qosmio, it was very important to install Qosmioplayer initially.

• I need to reinstall photoshop elements 8 after having problems with my hard drive. I use MacBook Pro and a timemachine. After restoring the program of the Time Machine, I got the error 6 code: a license for this product has stopt working. How can I cancel

  I need to reinstall photoshop elements 8 after having problems with my hard drive. I use MacBook Pro and a timemachine. After restoring the program of the Time Machine, I got the error 6 code: a license for this product has stopt working. How can I cancel it?

  See here:

  Error "Licensing has stopped working". Mac OS

• Problem with connector hard drive to spring on T43 motherboard

  My T43 (type 1875) cannot operator unless I am pressing on toward the down on the palm rest above the spring certainly drive connector.  This connector seems to be designed to move upwards & downwards on two positions.  44 pin hard drive seem to connect indirectly to the motherboard via 44 springs in this assembly.  This Assembly should be compressed manually for the system to communicate with the hard drive.

  I do not understand the physical design of this connection?  I certainly do not understand the purpose of this complicated mechanism.  It is part of the protection of the hard drive?

  To correct the problem, I see two possible solutions;  either compress the springs, then bend the stems of alignment to maintain the State of compression, which makes electrical connections or replace the motherboard.

  If someone put me on how I could fix this?

  -Michael Faklis

  Note of the moderator; email address removed before finding too much spam

  This is common with the T4x problems and those who have not been carefully reassembled since the Council can become cracked over time especially when door one-handed from a corner as a person would natrually.

  Even models 15 inches and their solid upper bezel can experiencine this issue, but the models 14 inches and the palm rest of split and are the most sensitive.

  The system works when you press the right ALT just below and to the right of the trackpad?

  If you took the palm rest off the power, then press the plug of the battery, it restores the operating system?

  If so, you may be lucky that the Council itself cannot be cracked but it could be the connectors of taking battery BIOS on the Board and in this regard a $3 repair. Cut the connector and replace with a new one or cut and reweld to ensure that the circuit is solid.

  If it is cracked, you can hold with some high quality neoprene since used neoprene "shrink as styrofoam when exposed to heat and pressure. Shim planks will run, but the added stress of ttignehtning it back together can create other pauses as you are bowing the bridge so that the stress has to go somewhere.

  In addition, the system will work better if it remains stationery for a portable shim will pass when the goods are shipped under nomral conditons.

  Finally, the entire system will be brick and you can save or part the rest of it.

• After the clean install of windows 7, it gives an error saying that there is a problem in the hard drive.

  * Original title: hard drive

  I have a lenovo laptop, processor Intel i3, 500 GB hard drive. After the clean install of windows 7, it gives an error saying that there is a problem in the hard drive. I ran chkdsk looking for bad sector and its display 6000 KB in bad sectors. After completing the audit when it began to restart its stuck when the windows logo appears. What should I do? Reinstall the windows help?

  Run the hard drive HD diagnosis extended CD scan manufacturer to know with certainty the State of the reader.  If your brand has no bootable diagnostics in the link, use Seagate Seatools burned onto CD or SeaTools for a USB key .  Follow this with a full check disk command from the installation media kicked prompt know with absolute certainty the State of the reader.  If he repeated the errors after you run the two tests twice, I replace it or at least keep everything backed up in real time.

  If by chance the drive past diagnosis then compares the steps you've done with the best possible Clean install Windows 10 in the link, you can do more if it varied too - especially if the partitions were not deleted during install.  If you do then I additonally run own Diskpart command command line of the punt media accessible to the first screen after startup by pressing SHIFT + F10 keys, or through the repair your computer on the second screen.

• "A problem with the display driver.

  Recently, I get an error message whenever I open Photoshop CS4. It reads as follows.

  "As Photoshop has encountered a problem with the display driver and has temporarily disabled GPU enhancements. Visit the Web site of the manufacturer of the video card for the latest version of the software.

  "GPU improvements can be enabled in the Performance preferences panel."

  I checked the graphics cards in Device Manager, and when I tried to update the software, it told me that I was aware.

  • OS: Vista Edition Home Premium
  • Dell Inspiron 1520
  • Display driver: NVIDIA GeForce 8400 M GS

  Sincerely, Danny

  Hello

  Try to update your display manually driver and do not use the analysis of the drivers on the manufacturer's website either.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system. For
  each driver in the list, additional useful information is displayed: load address of the driver, description,.
  version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - Device Manager - Display Adapter - note the brand and complete model of your
  video card - double - tab of the driver - write version information. Now click on UPdate Driver (this
  cannot do anything as MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
  This will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party with their
  own the software and drivers and all other main drivers that you have.

  Now go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration) and then of the manufacturer of the device
  (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for the BIOS, Chipset and software)
  updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after each installation.

  Always check in the Device Manager - tab drivers version you install actually shows up. This
  because some restore drivers before the most recent is installed (particularly that audio drivers) so install a
  pilot - reboot - check that it is installed and repeat if necessary.

  Repeat to the manufacturers - BTW on device at the DO NOT RUN THEIR SCANNER - manually check by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
  This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
  questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
  manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• my computer asks me to fix a problem with the graphics driver intel but windows tells me solution can not be downloaded

  computer crashed and rebooted itself. I first started in safe mode, and the computer did not find any problems but had sent a report anyway.

  To restart normally, the center of the action (or as I would say, Center!; - p), has been asking me to scan with windows defender and a problem with the graphic driver intel. Scanned well, but to solve the problem, said action solution Center could not be downloaded. I am most definitely connected to the internet and have tried to solve this question many times during approximately the last 18hours?
  Help would be much appreciated?

  Good suggestion but I tried this, had to go the manufacturer of the laptop, but still no luck. Think he was playing tricks on me in any case, as seemed to be resolved with a full audit of the system and diagnosis.

  Thanks for the effort though...

• I get the message: Photoshop has encountered a problem with the display driver and has temporarily disabled GPU enhancements. Visit the Web site of the manufacturer of the video card for the latest version of the software.

  Photoshop has been giving me the warning:

  Photoshop has encountered a problem with the display driver and has temporarily disabled GPU enhancements. Visit the Web site of the manufacturer of the video card for the latest version of the software.

  Also other programs are affected.  I suspect a recent download of Adobe.  Can anyone HELP.

  No, it has nothing to do with updates of Adobe. There is a problem with your video card driver.

  Go directly to the Web site of the manufacturer of the GPU for updates (not Microsoft, not a System Builder).

• Photoshop has encountered a problem with the display driver

  I've updated photoshop on my mac last night as it kept prompting me to do, and I have an exam tomorrow, which requires the use of photoshop. When I open photoshop this morning the following message appears:

  "Photoshop has encountered a problem with the display driver and has temporarily disabled the improvements using graphics hardware. Visit the Web site of the manufacturer for the latest version of the software. For more information, visit: http://www.adobe.com/go/photoshop_gpu_cc_en'. '.

  Can someone help me with this? IT IS URGENT!

  The problem is the driver for your video card, no Photoshop.

  Update the video card driver from the website of the manufacturer of the GPU (NOT Microsoft or a system integrator).

• How to partition the hard drive in my satellite M40X-189?

  Please can you advise the team?
  I would like to have the operating system and application programs in a partition and the data I've created in another partition.
  Please can I have advice from the team?
  Has anyone partitioned the hard drive on their satellite M40X-189 and what software did you use to do the partitioning?
  Also, I just defragged my hard drive and the card reader can be seen at: http://www.seniorvalues.org/drive%20map.jpg
  I am curious about the above provision given that free space if 52%, but white space does not reflect this and there is a piece of defragmented files and folders around the middle of the big whitespace at the end of the training I was expecting to be adjacent to the last great defragmented file.
  TIA
  Welshmike

  Hello

  I use partition magic to create and manage new partitions. In my opinion it of the best tool if you want to work with partitions.
  I have 2 partitions on my unit. C for OS and D for the 3rd of data and files. In this case if I recover my unit only the first C partition will be formatted.

  Good bye

• Problem with external hard drive (an unexpected error - 50)

  I've had this problem for a few months now. Sometimes, I can't delete a file from my external hard drive, or export a file to it. The process is impossible, and I get a message "Cannot perform the action due to an unexpected error - 50". Ejecting the disc gives the message "eject impossible because another program can use it." Ejection force becomes the only option. After re-login, the problem goes away, like nothing ever happened.

  The question is not constant, but quite common to become a nuisance, the one I want stopped.

  That's what I think it is (a bad connection with the cable, defective contact), or is this a virus? I need to know.

  The hard drive is 1 TB Toshiba Canvio Basics and is formatted as Mac OS extended (Journalized).

  not a virus, and not only because there is no virus mac at this time.

  negative errors on the discs can be a signal indicating that the file is corrupted or worse still, the drive is failing. While it can also be a problem with the cable or the connector that it commonly goes back on the disc itself.

  Currently, it is recommended that you backup your data if a backup fails, you may need to save what you can manually and sometimes that means go to this folder by folder or file by file

  Use Time Machine to back up or restore your Mac - Apple Support

  All HARD drives (and SSD') eventually fail and while this isn't a your statement you should check the drive with disk utility (Macintosh HD/Applications/Utilities/Disk Utility) after you got what you possibly can off and consider replacing the disk with a new one.

• Qosmio G30 (PQG31) - problem with cloned hard drives

  Hi all!

  * Qosmio G30-154 * (* PQG31 *).

  Demo of the Qosmio has 2 hard drives with XP MCE (32 bit) installed on the primary.
  The RAID parameters are JBOD.
  BIOS is "newer" 3.90

  I would try to upgrade the drives (without installing any OS) and... have a problem!
  BSOD "Stop 0x0000007B" after 'clone with resizing' for the main HARD disk.

  I read on [drivers Toshiba RAID | http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=48489] also [how to integrate the AHCI driver when installing Windows XP | http://aps2.toshiba-tro.de/kb0/HTD9401AN0000R01.htm] and (or)
  [SATA and AHCI Intel Matrix Storage Management Software: "the installation program found no hard disk units installed in your computer" Error Message during Manual Installations | http://aps2.toshiba-tro.de/kb0/TSB7B020R0000R01.htm], but I don't want to install OS, I want to keep intact my OS work.
  F6 (for all usb drivers) is not available to boot OS, sorry.

  "cloned" drive is in line with the correct name of made in the BIOS. "Cloned" secondary drive works (with old primary school). How to get access to the new primary OS and loading cloned? Please, any ideas?

  Thank you.

  Hello

  I think that the system cannot boot to the new HARD disk as the partition where the system is installed, was not marked as bootable system partition.

  I recommend to insert the previous HARD drive and to start the laptop.
  HARD drive new, cloned could be connected as an external HARD drive to a USB port.

  Then you should go to disk management (right click my computer - manage-> management-> disk management computer)
  Here you can see the HARD internal disk and the 2nd HARD drive connected to the USB port
  Right-click on the partition (2nd HARD drive) where the Win XP has been installed and choose the partition as the system partition and mark it as active.

  Then you could change the HARD drive again and could power the device in place. Usually, the system should boot to the top of the new marked system partition.