Re: Satellite P200: how to move from SATA to install XP - Dual OS

Similar Questions

• Satellite A500 - how to move from Vista 64 bit to 32 bit?

  Hei guys,.

  Recently, I bought my new A500 series - 14 c and installed the 64-bit version of Vista. What is happening is that I later discovered that a USB sound card that I use doesn't have vista64 drivers yet, so I wanted to reinstall the OS and choose Vista 32 this time.

  I was wondering how I can do? Can I just create the recovery DVD using Toshiba Recovery? Who will ask me this that IF I want to install or will it just restore the latest version?

  What other ways can I try? My computer did not bring any DVD, so I guess that the two KIND of facilities are always stored on the HARD drive. I don't know where or how to use them.

  > I recently bought my new A500 series - 14 c and installed the 64-bit version of Vista

  I guess that you have formatted the whole HARD disk during the installation of 64-bit Vista.
  Is this good?

  If yes then you would not be able to get the Vista 32 bit OS back because you n t create the recovery disk before installing vista 64 bit OS.

  The Toshiba laptops Toshiba recovery disc Creator called tool.
  This tool allows you to create the recovery disk that you would help to redefine the laptop to factory settings.

  If you don t have this drive and if you are not able to create it so you could order from this page:
  https://backupmedia.Toshiba.EU/landing.aspx

  Good bye

• How to move from the photo library?

  How to move from the photo library? How to use more than one library?  I would like one on a second partition for work stuff and hand over folder for personal stuff.

  Do the drag to another volume and launch Photos with down necessary option.

  (144134)

• How to move from x 1 standard x 1 pro and what is the cost?

  How to move from x 1 standard x 1 pro and what is the cost?

  Hi Chris,

  XI STD. Pro XI upgrade path is not currently available.

  I would say that the last DC Acrobat upgrade

  Kind regards

  Rave

• Re: Satellite P200 - installation of XP and SATA driver

  Hi guys

  I'm new to the forum.

  I know there are already 100 topics on installing XP on a Toshiba Satellite P200 and believe me I have lived all of them, but I'm still fighting trying to install XP.

  I will describe the steps I've been through so if someone could tell me where I'm wrong or try something other way out then let me know:

  I went to the following site to download Intel Matrix Storage Manager:
  http://Downloadcenter.Intel.com/Filter_Results.aspx?strTypes=all&ProductID=2101&OS FullName = Windows * + XP + Professional & lang = eng & strOSs = 44 & submit = Go %21

  First of all, I downloaded
  32-bit floppy Configuration utility
  (F6flpy3287)

  Now the first download did not contain an exe file, so I've been to unzip and copy the files on my floppy drive. I inserted my XP SP3 CD and rebooted the laptop, when XP installs the Setup files, I pressed F6 (that she mentions at the bottom of the screen) after installation of the files, that it says something like that couldn't detect the drivers and press S to select one of the pilots in total there are 4 riders, I chose all alone (so did 4 facilities in total) , but it keeps giving the same error.

  The error itself says something like the hard drive is not detected and to be honest its make me lose the will to live because I spent hours trying to figure this out.

  As there are two managers matrix downloads I tried the other as well:

  32-bit floppy Configuration Utility for Intel Matrix Storage Manager version 5.5.0.1035
  (F6flpy32)

  This one was an exe file, I have attached my USB floppy drive ran the exe file that has copied the files and I tried to choose once again each of the 4 drivers the entire installation, but it says the same thing no hard drive detected.

  Someone help me please, I would really appreciate it.

  Thank you

  To be honest, here are really quite subject to this subject and enough descriptions how to do this please, read it.

  I think the simplest is that you download the storage on the Toshiba site manager.
  Then, you can use nLite to integrate the driver on the CD.
  After that, you must also start the CD and then the HARD drive is detected (you don't need to press F6 to load the driver.

  And here's all the necessary links:
  http://EU.computers.Toshiba-Europe.com
  http://www.nliteos.com

• Satellite P200: How to calibrate the monitor to get the same colors using Photoshop CS3

  How to calibrate the monitor to get impression that looks like the picture on the screen?
  I use Photoshop CS3.

  When I get a pic of how I want it on the screen and try to print, it prints a lot more dark. I was able to calibrate my monitor iMac for photoshop, but could not find a way to do it with my Satellite P200.

  My printer is a Canon ip4300 and I'm using paper and ink of Canon.

  Hello

  Sorry, but I think that there is not much to do. I guess you have right ICC profile, but something like that is not supported by Toshiba.

• Satellite P200-1JV: A DVD from Toshiba drive - unable to output video...

  Hello

  I just signed up so forgive me if I posted this question in the wrong place.

  I have a Satellite P200-1jv and I could read the dvd on it without problem. Now when I try to play a dvd using the Toshiba player, I get a message coming indicating + * impossible at the exit of the video on an external device. Please change your device display by pressing Fn + F5 keys after the end of this application + *.

  I'm trying this and lcd comes but never changes. What I am doing wrong?

  Thanks for your help.

  Stretchmo

  Hello

  I think I can help and I found a solution.

  I recalled to this topic and searched a bit here in the forum and found this thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=114726𜀦

  Jack Black has posted a link to the document from Toshiba which describes exactly this problem and offers a solution.

  The problem can be solved by updating the Realtek Audio driver.
  You can download the driver from his most recent on the Realtek site and may reinstall it.

  Concerning

• How to move from areas of an image?

  • How can I move from areas of an image?
  • I have a picture with the sketch of a dog at the bottom of the image, with script above it. All I want to do is go down the script and move the dog up. I spent hours trying to do or not this result.
  • Help!
  • Pen-K5

  Here I chose the dog and copied/pasted into a new layer.

  Done the same with the poem.

  The move tool to reposition the two layers.

  The full original white background layer.

  

• How to move from the physical layer to the business layer

  Hello
  
  I added schema SH to my physical layer, how to move that layer business and layer of presentation? If I want all the tables and the columns of this pattern to my company and Presenattion of the layer.
  
  Thank you.

  Hello

  Please find below the link he gives step by step help you from beginning to advance

  http://www.Oracle.com/technology/OBE/obe_bi/bi_ee_1013/bi_admin/biadmin.html

  assign as correct, so useful

  Thank you

• How to move from the old iMac, iMac (24-inch mid 2007) to the new

  Got an iMac (24-inch mid 2007), and the desire to buy a new... How to transfer from 'old' iMac again?

  You will have the option to do so when you set up the new iMac; He can run through a network, external drive or disc mode target.

  (140878)

• If you use vista, how to move from one account to another windows messaging?

  My set cable company in place for e-mail accounts.  One for my wife and one for me.  My wifes account is the default value.  How to switch from one account to another?

  I searched through default settings, account information, etc. anything. I believe that under XP, you could choose an account or another.

  OE has the option of identities, Winmail opener does not work. Unless you have separate Windows logons, you use the same instance of WinMail and share the same Inbox, unless you create another and divert the mail with message rules. The only "switch" you have at the moment is when you compose a new message, there is an arrow down to the right of the field to choose the account, the message will be.

• Satellite P200 P3PB3E: Network adapter not working after installing XP

  I have a Satellite P200-p3pb3e running xp - sp2 inder. I downloaded the drivers on the Toshiba site and everything is working fine except for one element: the Ethernet controller is marked yellow in the Device Manager.
  I don't know where I can get the driver.

  A strange point that may or may not have an impact: Atheros network card is displayed as AR5006X with EVEREST, while Device Manager displays AR5007EG.

  I used the driver from the Web from Toshiba site.

  Hello

  Satellite p200-1dy seems to be equipped with chip Realtek 10/100 Base-TX Ethernet.
  Therefore, it would be desirable to search for on the site Web of Realtek Lan XP compatible driver.

  :) See you soon

• Satellite P200 - 17 c: Question on the clean install of Vista

  Hello

  I have the Toshiba P200 - 17 c Personal Computer and I don't want programs like Norton ISI because I want to install my own I, so thought to format the drive to install Vista Premium on its own and then install the drivers and the utilities of the download on the Toshiba webssite section, but, after reading the thread at this link :

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=28091&TSTART=45

  I see that some users who also have this pc had problems to install the drivers and utilities, that they got on the site for their P200 - 17 c. A user who installed instead of Vista Premium Professional Vista and then tried to install the drivers/utilities for Vista Business that he has downloaded from toshiba and was getting errors like "invalid serial number."

  I still want to use Vista Premium on my P200 - 17 c and then install my Toshiba approved some drivers/utilities. Surely in this case, all the drivers should install without problem on the same model computer and s/n?

  Concerning

  Brave

  Hello

  The European driver Toshiba page provides the drivers for Vista OS. This means that these drivers must be compatible with all versions of Vista. There should be no problem because all the Vista OS s use the same kernel!

  But note; If you use the clean Vista you must also use a compatible serial for a Vista version right key. In addition, you should note that there are different sets of P200 and so good drivers for the series on the right should be choose in download form.

  All that s

• Satellite Pro L40 - how to move from a Vista to XP

  Hi all

  I would like some info on "how a Vista to XP downgrade?
  I have an original XP SP2. Please help...
  I tried before, but the sound does not work... help please

  Apreciate will please and thanks in advance.

  Hello

  Usually, you can find and get these fixes Windows on the Microsoft page.
  You can also try Google. Simply search for the KB888111 and KB835221.
  Many websites of third 3rd provides these patches too.

  I had the same problem in the past and resolved is to install the patches mentioned before installing the audio driver.
  As I remember, audio device marked with exclamation yellow must appear after the KB888111 and KB835221 and portable installation restart a new high definition.
  You must install the audio driver to get rid of yellow exclamation point and to get the sound functionality.

  See you soon

• Satellite A100: How do I enable SATA NATIVE mode

  Hello, my laptop Satellite A100 PSAA9 and the southbridge is an ICH7M
  I put an SSD in my laptop and the drive controller is locked-> Ultra DMA 6 IDE compatible mode.
  I would switch to the native SATA-1 to increase the bandwidth (from 110 MB/s-150), but I can't find any setting so that, in the last BIOS 6.00

  I think that maybe in the past, Toshiba has enable this feature, but I suppose they might have turned it off for beginners who don't know how to install the SATA drivers during the installation of Windows.

  I found Toshiba BIOS database, but it is locked by a password.
  I'm willing to test any BIOS that could re - enable native SATA mode

  + The message was edited: link has been removed - unauthorized +.

  Hello

  You need the native SATA controller?

  The laptop was equipped with a controller SATA interface supports the Serial ATA Rev. 1. 0a.

  Some laptop models take a BIOS that contains a SATA mode option.
  This option can be changed on AHCI or in compatibility mode.

  But as far as I know a100 BIOS does not contain these settings