Re: Satellite Pro U400-11V - mass storage controller

Whenever I turn on the camera, I get the message "New hardware" about "mass storage controller".

How can I fix it?

Research on driver downloads is not one for this name.

It's strange. I mean when a certain piece of hardware is correctly installed, it is done with the installation.

A question: did you install your own operating system or what? Is when the operating system is installed with the Toshiba recovery image, this message will not appear.

Tags: Toshiba

Similar Questions

  • Satellite Pro U400-11V: possible to increase the 60 Hz screen refresh rate

    I have a laptop Toshiba Satellite Pro U400-11v.
    I just realized that my screen refresh rate is 60 Hz (resolution 1280 x 800).
    Even I decrease the resolution. It won t be another option 60 Hertz.
    Is it possible to increase it?
    My monitor is indicated under the generic name of the PnP in the system.

    You cannot increase the internal laptop display refresh rate and it of not necessary to go higher, because all the internal laptop screens are running at 60 Hz.
    If you would like to connect an external monitor, you will probably see higher available for the external monitor refresh rates.

  • Satellite Pro U400-11V - Sharp noise when starting with connected screen

    Hello

    We received 5 x computers laptops Satellite Pro U400-11V, are excellent, with one exception:

    When you start (it happens on all of them) with a screen VGA monitor plugged in, a high beep is played from what looks like the speaker system. It occurs just before the first splash screen windows.

    Once the windows login screen is displayed a monitor can be connected to any problem & works very well.

    What can I check? I have had a look but do not find all the tracks so far, where this post.

    Thank you
    -A

    Perhaps you are meaning that the beep POST (Power on self test)?

    The laptop still sounds if the POST has been successfully passed.

    Parts of the motherboard will be verified during POST, and if everything is ok, a beep is displayed.

    If something would be a mistake, the laptop will not start and different beeps would appear.

    Welcome them

  • Satellite Pro U400-11V - Installation using the floppy from XP downgrade

    Hello

    Yesterday I had to replace my HARD drive once it is simply dead.
    I didn't know it was a big deal that I had lost any data.
    I would just like to re - install Windows XP using the Downgrade XP disk came with the laptop.

    It turns out that: I have about 10 discs Downgrade XP each almost identical looking and everyone, I assume, associated with a particular Toshiba laptop my company bought at some point.
    Now, I have no idea what drive is the one that came with my Toshiba Satellite Pro U400-11V.

    What I did:
    -We selected at random.
    -Installed Win Xp Pro.
    -Tried to activate Windows.
    -It indicates that the product key is bad (and some drivers are missing, so it is obviously not the disc that came with the laptop, but he got me so far).
    -Correct the product key according to the key that is located on a sticker at the bottom on the laptop *.
    * On the sticker, this key is an OEMAct Windows Vista Business key, the OS of the laptop came with.
    -L'activation of Windows will not accept the key to the sticker.

    So I have 2 questions:
    1. is there another method of re - install Windows XP Pro using the * original * Downgrade XP disk that came with?
    2 (leading to #1) is it possible to identify which drive is the one shipped with my laptop? Perhaps by checking some serial numbers on the disc?

    Worst case scenario I'll have to make (at most) 10 Windows installs until one works.
    But I was really hoping some help & advice.

    I can't wait to hear all the answers,
    Thank you!

    Hello

    > I have about 10 discs Downgrade XP each almost identical search and each, I presume, associated with a particular Toshiba laptop my company bought at some point.
    > Now, I have no idea what drive is the one that came with my Toshiba Satellite Pro U400-11V
    Your ad is really funny :D

    I put t know how your Win XP drive looks like. My laptop came with the recovery disk and it was mentioned on the label that it's Toshiba recovery disc.

    In addition he s already enabled so I put t need to activate the operating system by using this key.
    Also, the key at the bottom of the unit belongs to the preinstalled operating system and it will NOT work with the new Win XP or another operating system.

    But back to your Win XP disks
    I recommend that you check the single disc... maybe a disc is already activated

  • Satellite A200-10w - PSAEC: mass storage controller driver

    I uninstalled to acciently mass storage controller driver and cannot find anywhere! Can someone please help me find this driver?

    Thanks in advance, Luka

    You have the following options:

    Go to the website of toshiba driver and just download it here by choosing your model and operating system:
    http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

    or go to the Intel website and download it here:
    www.Intel.com

    Good luck

  • Satellite A200 - need to mass storage controller

    Realized just install fresh in A200 WXP and the only device imminent in the 'Device Manager' to be installed are a 'Mass Storage Device' and not able to understand which driver download. Details refer to a PCI\VER, can anyone give a suggestion for what I forgot.

    Charges so far:
    A200 BIOS updated for Windows XP Home edition
    ALPS Touch Pad driver
    Chicony Camera
    Intel Chipset utility
    Driver Modem
    Network driver
    Audio driver
    Network wireless driver

    Thanks for any help
    Dave...

    Hello

    I doubt you will find a driver for "mass storage device.
    Why, because this feature is only supported by Vista and so drivers XP don t exist.

    Check this doc from Toshiba:
    [No driver Windows XP for PCI memory controller | http://aps2.toshiba-tro.de/kb0/TSB83023N0000R01.htm]

    You will find this:
    + After the installation of Windows XP, there might be a yellow exclamation by a "PCI memory controller" or * "Mass storage controller" * in Device Manager. +
    + This unit is probably the module of Robson former Turbo Memory. +
    + This hardware will only supported by Windows Vista. +

    Good bye

  • Satellite P200-1JY - Windows mass storage controller driver 7

    Hello
    I own a P200-1JY PSPB6E, and I installed Windows 7. One device no driver found, is the "mass storage controller" and I havn't found this driver...
    Am I the only one having this problem?
    Kind regards.

    Hello

    You are not alone.
    I aso had this on a P500 when you perform a clean install of Win7.

    Go to the Toshiba website for your area and download the Toshiba Win7 drivers for the driver problem, you... P200 I found here - http://support.toshiba-tie.co.jp/windows7/download/Satellite_P200_32_au.htm

    There is a storage config atch here as well I think solved my problem in a few weeks ago...

    Windows7

    Pilot

    PatchFiles (TOSHIBA Storage Configuration Patch for Windows7)

    BR /.
    Rob

  • Satellite A100-294 - need mass storage controller driver

    Dear all.

    Where I can download: controller driver for mass storage for notebook Tosiba Satellite model A100-294:
    Reference number: PSAA8E-02T014GR

    Please help me.
    Sunny
    \

    You need this driver for Windows XP or Windows Vista?
    Why should you get this driver? You have no yellow exclamation point in Device Manager?

  • Satellite Pro U200-104 - mass storage device driver

    Hey all,.

    I just bought a second hand U200-104 and it installs now. My OS is Windows Vista Business 64-bit & 32-bit seem to work ok. Although I installed all that he is on the page of the driver that I keep having an unidentified "Mass Storage Device" in my device list.

    In the properties, it says:
    -Location: Bus PCI 3, device 11, function 2

    I hope someone can help me!
    Thanks in advance :) a mollion

    Hey Buddy,

    > Location: 3 PCI Bus, device 11, function 2
    To be honest, this information is not useful
    You should check the vendor and device IDS in the devices in the Device Manager.

    At the present time it is difficult to tell what device it is, but you should try to install the card reader driver. Visit the Web from Toshiba for this!

  • Satellite Pro U400-11V - charges only battery when the computer is turned off

    Following a reformatting my hard drive of the computer, my laptop recognizes only the AC/DC power adapter when it is turned off. When the computer is turned on, it does not recognize the AC adapter.

    Changed the power supply ac and it made no difference.

    Have also tried an update of the BIOS (3.0), I am running Windows Vista 32 bit.

    Hello

    I doubt it has something to do with the software or the operating system. In my opinion, that this looks like a hardware problem, because the battery will be always charged if AC/DC adapter is plugged in. That's why it of not necessary to enable this setting in the configuration of the software.

    If your BIOS is already updated, contact an authorized service provider. Technicians can check your laptop and maybe the motherboard needs to be replaced.

  • Satellite Pro P300: Need driver "Mass storage controller" of Vista 64-bit

    Hi, please help.

    I just upgraded my laptop from Windows Vista 32 bit Vista 64-bit.

    I managed to find all the drivers apart: the driver "Mass storage controller" (yellow exclamation in Device Manager).

    I don't know where to look for this driver.

    Any help would be appreciated. Al

    Hello

    I guess you didn't search in the forum for similar issues? Is this good?
    I think that I m straight because I searched the forum and found that Toshiba FAQ doc.

    + No driver Windows XP for PCI Memory Controller +.
    http://APS2.toshiba-tro.de/KB0/TSB83023N0000R01.htm

    Here you can find this text passage:
    After the installation of Windows XP, there might be a yellow exclamation by a "PCI memory controller" or * "Mass storage controller" * in Device Manager.

    _Solution: _
    This unit is probably the module of Robson former Turbo Memory.
    This material will be supported only by Windows Vista.
    There is therefore no Windows XP driver.

    Now, everything should be clear ;)

  • Satellite A200-1CR - driver for the mass storage controller

    On my Satellite A200-1CR / Windows 7 Pro, I see yellow "Mass storage controller" in the list of devices. Should which driver I install?

    My card reader is not working now.

    Hi createa,.

    > Also my card reader is not working now.
    Maybe you should install this driver ;)

    Theoretically, mass storage controller might mean the card reader so I recommend installing this driver.

    Check this box!

  • Satellite P200-1DY: need XP drivers - LAN, SM bus and mass storage controller

    I have a Satellite P200-1DY running XP - SP2. Where can I find the drivers for Ethernet, storage of buses and the mass of SM controller controller?

    Are they 'hidden' in one of the drivers in one of the driver for XP Toshiba site list?

    How can I identify what version of laptop I have: PSPB0, B3, B6, etc. ?

    Oh. I have already answered in the other thread you posted here in the forum;
    http://forums.computers.Toshiba-Europe.com/forums/message.jspa?MessageID=117816#117816

    Seems you've discovered what series it is ;)

    PS: the SM bus and mass storage controller are communities which are only compatible Vista and so drivers don't exist for the XP operating system

  • Satellite M100 - mass storage controller can not be read

    Hey guys, I checked the wires and did not find all the discussions leading to it.

    I have a series of Toshiba Salellite M100 and realized that my mass storage controller cannot be read because I don't have the driver for it, and I have search endlessly trying to find this driver for my laptop. Its my memory card reader.
    I tried to look in my drive to restore but to no avail.

    Any help on this issue would be much appreciated!

    Toshiba Satellite M100 (MCLEV10ACP05) with Windows XP Home Edition
    T2300 at 1.66 Ghz

    Thank you for your time.

    Hello

    I think you need to find the drivers on the Toshiba site. ;)
    http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

    Download the driver for the card reader and install it.

    Good bye

  • Unposted on Satellite A100-680 mass storage controller

    Hello
    I have a Satellite A100-680 (PSAA9E) that has worked, XP Home, for about two years. Very satisfied!
    I decided to upgrade to Vista Business, which worked very well (actually impressed by the ease of installation).

    The machine works perfectly, there is only one irritating factor - under Device Manager - other devices I have something called mass storage controller and is not a driver loaded. I tried to locate one, but I have no idea of what to look for.

    Vista at one point suggested some Texas Instrument PCI device, but... Let me this way... Fortunately I have not reinstall because I had made a backup of the disc image.

    Can anyone give me a tip that I should look for.
    Thanks in advance
    Hans

    Published by: Admin

    Really nice, your installation of Win Vista worked all right.
    For this device not recognized, I also think it's the Texas Instrument card reader.

    Go: http://eu.computers.toshiba-europe.com

    And download the Flash Media Driver and maybe the SD memory Format. Install them, reboot and the unit must be installed without any problem.

Maybe you are looking for