Re: Shadow report

Similar Questions

• Shadow reports

  What is the best way to find more than a week all snapshots and send a notification by e-mail using Orchestrator?

  Here's something a put together earlier.  It may need some tweeking but can steer you in the desired direction.

• touch screen works is not to a few areas and typing randomly

  The touchscreen does not work in specific areas of the screen. and also it behaves erratically, opening, closing and switching applications and typing randomly on its own... sometimes the home button also stops working.

  The problem started with "ghost typing" and automatic switching of applications. and recently to the touch in some places on the screen also stopped working...

  I do not have a centered around Apple care, so I thought to get certain points of view on this problem before relying completely on the local repair store guy...

  You have coverage on the iPad that can interfere with the screen?  I've seen other shadow report type and it turns out being the hardware issues, but try some basic troubleshooting steps. Close all applications and the strength to restart the device first.

  Close all applications. Press the Home button twice quickly. You will see small glimpses of your applications recently used. Drag to the left to find the application you want to close. Swipe up on the preview of the application to close.

  Now restart of strength. To force the reboot your device, press and hold the two buttons of sleep/wake and home for at least ten seconds, until you see the Apple logo.

  If this difference, try this. Reset all the settings. You won't lose any data, but all the parameters of the device will have to be entered again in the settings app. This includes the WiFi password. Settings > general > reset > reset all settings.

• Enough Storge is available to create the sadow copy storage file or other shadow copy data: 0x8004231f:

  I get this message every time when Windows tries to slopes upward, yet, I have 50 GB of space on the D drive, I checked back to the location. I hope someone can help, thanks
  Ads

  The 0x8004231f error code indicates VSS_E_INSUFFICIENT_STORAGE. I suspect that the problem is related to the following factors:

  -L' free space on the partition that is related.
  -The maximum size of the shadow copy of Volume.

  Therefore, I would suggest that we check the first above.

  I. Please make sure you have enough space in your backup media.

  II. to verify the maximum size of the shadow copy of Volume:

  1. right-click the partition to back up, and then choose Properties.

  2. in the instant snapshots tab, click the settings button.

  3 change the maximum size of a larger.

  Please check if the problem has been resolved.

  If the problem persists, please help to collect the following information.

  1. what brand and model is your backup media?

  2. VSS debug log
  Refer to the following KB to enable VSS debug log. Reproduce the problem
  then save and send me the trace file.

  887013 how to activate Volume instant cliché service debug tracing
  features of Microsoft Windows Server 2003
  http://support.Microsoft.com/?ID=887013

  3. download and run the tool to report on the SBS 2003 server configuration MPS.

  a. visit of the
  http://download.Microsoft.com/download/b/b/1/bb139fcb-4AAC-4fe5-A579-30b0bd9
  15706/MPSRPT_SETUPPerf.exe to download the file.

  b. run the MPSRPT_SETUPPerf.exe on the area of the server.

  c. wait 10 ~ 15 minutes.

  d. open Windows Explorer, navigate to the
  %SystemRoot%\MPSReports\Setup\Reports\cab

  e. send the .cab file directly to me at * address email is removed from the privacy *.

  I appreciate your time. I am happy to help and watch
  to send your answer.

• Backup impossible error 0 x 81000019. Cannot create the shadow...

  I can create backups is no longer on my computer. Whenever I try, I get the same error message.

  "A snapshot could not be created. Pleasse check "VSS" and "SPP" applications for more information event logs.
  Details: shadow enough storage to create the copy storage file or other shadow copy data. "Error code: 0 x 81000019

  I know that it says that there is not enough space, but it's not likely. This is a fairly new computer, less than a month, and the hard drive I backup a lot of storage space left (800 + Gb).

  When you save files on a computer Windows 7 may appear error 0 x 81000019 with an error message similar to the following:

  "A snapshot could not be created. Please check the event logs "VSS" and "SPP" application for more information. Details: shadow enough storage to create the copy storage file or other shadow copy data. »

  This error can occur as a result of having too many language packs for Windows installed on your computer.

  The cause is that the backup process involves the system writer who reports files in applications, installed on the machine. Where a large number of language packs installed, reported by this writer metadata file becomes huge in size and does not fit the size of 100 MB. This causes the backup to fail since there is not enough space for the creation of shadow copies. This isn't something that you can check to validate because this metadata file is created during the backup and deleted at the end.

  To resolve this issue, uninstall all unused language packs that are currently installed on your computer. You can do this by clicking Start and then typing Lpksetup.exe in the search box and then click Lpksetup.exe in the list of programs. Once the Language Pack installation starts, click on uninstall display languages. Uninstall the languages that you don't use and then restart your computer, restart the backup.

  Bobby

• Windows 7 system image - no space for Shadow Copy

  Windows 7 x 64 SP1

  Disc 1 - drive drive C: - 42 GB free out of 100 GB + system

  D - 173 out GB free drive of 200 GB

  Disc 2 - drive E: - 287 GB 300 GB free

  The system of running a report image "Backup and Restore" not enough space to create shadow copy volume.  Shadow copy volume is "started - manual" Windows Backup Service is "Started - manual" target for Sysimage is drive E:.  Help appreciated please

  I tried several backup and imaging products, but until recently, Windows backup works wonders for me

• Shadows on shapes: unexpected results on the output of HTML5

  Shadows are known for questions of course with out HTML5?

  It seems that putting a drop shadow on a SmartShape with stroke and fill of 100% opacity, two shadows are producing; one for the filling and one for the race, in which the shadow of race comes actually on form rather than below (or somehow shines through. Can't if there is no line. Can't get on other objects; e.g. boxes to highlight.

  Is it possible to change this behavior for HTML5 correspond to the Flash?

  Edit Mode:

  

  Flash power:

  

  Output of HTML5:

  

  Checked and it is a bug. You can submit a bug report to http://www.adobe.com/products/wishform.html

  The only way I can see around him, would be to remove the feature, duplicate the object is directly above the old object, then set the fill to 0%, adding the race again and remove the shadow. It is not ideal, but if you need to use the drop shadow with an object that has a stroke, it's the only way I can see the output file as HTML5 without appearing inside the shape.

• Shadow with .jsx

  I have thousands of images cropped bottle and I would like to add a shadow (made with ellipse-> Gaussian blur, blur movement) at the bottom of each with .jsx. I have a lot of difficulties because the bottle images have different dimensions, and I would also change the size of a shadow. I need a script! could someone help me?

  Here, it's with the addition of 300 to the canvas

  app.activeDocument.suspendHistory ("bcm_addShadow", "main()");

  main() {} function

  makeShadow (15, 4.5, 2.49, 25.49, 70); / / These values are procents

  arg1: this x to add to the selection of elised compared to the width of the layer

  Arg2: the procent to add to the selection of elised compared to the height of the layer of y / / obsolete

  Arg3: this blur

  Arg4: motion blur procent

  $arg5: this opacity

  }

  function makeShadow (xPrc, yPrc, blurPrc, mBlurPrc, shOpacPrc) {}

  = first to add 300 px autour

  var idCnvS = charIDToTypeID ("CNV");

  var desc9 = new ActionDescriptor();

  var idRltv = charIDToTypeID ("Rltv");

  desc9.putBoolean (idRltv, true);

  var idWdth = charIDToTypeID ("Wdth");

  var idPxl = charIDToTypeID ("#Pxl");

  desc9.putUnitDouble (idWdth, idPxl, 300.000000);

  var idHght = charIDToTypeID ("Hght");

  var idPxl = charIDToTypeID ("#Pxl");

  desc9.putUnitDouble (idHght, idPxl, 300.000000);

  var idHrzn = charIDToTypeID ("Hrzn");

  var idHrzL = charIDToTypeID ("HrzL");

  var idCntr = charIDToTypeID ("Cntr");

  desc9.putEnumerated (idHrzn, idHrzL, idCntr);

  var idVrtc = charIDToTypeID ("Vrtc");

  var idVrtL = charIDToTypeID ("Retix");

  var idCntr = charIDToTypeID ("Cntr");

  desc9.putEnumerated (idVrtc, idVrtL, idCntr);

  executeAction (idCnvS, desc9, DialogModes.NO);

  var btLayer = app.activeDocument.activeLayer;

  var btLayer.name = lyrN;

  lb var = getLBounds();

  var lw is parseFloat (lb.right) - parseFloat (lb.left);.

  var lh is parseFloat (lb.bottom) - parseFloat (lb.top);.

  var percW = (lw * xPrc) / 100;

  Var pole = (lh * yPrc) / 100;

  = get the substantive limits

  var lidx = getSelectedLayersIdx();

  var percWT = (lw * 20) / 100;

  var percHT = (lh * 20) / 100;

  makeSquareSelection (lb.bottom - percHT, lb.left, lb.bottom, lb.right);

  app.activeDocument.selection.invert ();

  makeShadowLayer();

  var tlidx = getSelectedLayersIdx();

  selectLayerTranspByIDX (parseInt (lidx));

  substractLayerTranspByIDX (parseInt (tlidx));

  // =======================================================delete temp layer

  var idDlt = charIDToTypeID ("Dlt");

  var desc240 = new ActionDescriptor();

  var idnull = charIDToTypeID ("null");

  var ref221 = new ActionReference();

  var idLyr = charIDToTypeID ("Lyr");

  var idOrdn = charIDToTypeID ('Ordn');

  var idTrgt = charIDToTypeID ("Trgt");

  ref221.putEnumerated (idLyr, idOrdn, idTrgt);

  desc240.putReference (idnull, ref221);

  executeAction (idDlt, desc240, DialogModes.NO);

  LCB var = app.activeDocument.selection.bounds;

  lcbO = {top: parseInt(lcb[1]), right:parseInt(lcb[2]), left:parseInt(lcb[0]), bottom:parseInt(lcb[3])};}

  app.activeDocument.selection.deselect ();

  = finished find substantive obligations

  var selW = (pole, lcbO.right + percW)-(lcbO.left-percW);

  var pH = (selW / 6.77)/2;//keepeng all elipsoids for the same report)

  makeElipsoidSelection (pH, lcbO.bottom - pH, lcbO.left - percW, lcbO.bottom + lcbO.right + percW);

  offsetSelection (-pole/2, 0); rising a bit selection

  makeShadowLayer();

  // =======================================================

  var idnewPlacedLayer = stringIDToTypeID ("newPlacedLayer");

  executeAction (idnewPlacedLayer, undefined, DialogModes.NO);

  selH var = (lb.right + bass)-(lb.left-perche);

  selcH var = (lcbO.right + bass)-(lcbO.left-perche);

  Alert (selH)

  var blurPercH = (selcH * blurPrc) / 100;

  Blur (blurPercH);

  var MblurPercH = (selcH * mBlurPrc) / 100;

  mtnBlur (parseInt (MblurPercH));

  // =======================================================move layer down

  var idmove is charIDToTypeID ('move');.

  var desc312 = new ActionDescriptor();

  var idnull = charIDToTypeID ("null");

  var ref283 = new ActionReference();

  var idLyr = charIDToTypeID ("Lyr");

  var idOrdn = charIDToTypeID ('Ordn');

  var idTrgt = charIDToTypeID ("Trgt");

  ref283.putEnumerated (idLyr, idOrdn, idTrgt);

  desc312.putReference (idnull, ref283);

  idT var = charIDToTypeID ("T");

  var ref284 = new ActionReference();

  var idLyr = charIDToTypeID ("Lyr");

  var idOrdn = charIDToTypeID ('Ordn');

  var idPrvs = charIDToTypeID ("Prev");

  ref284.putEnumerated (idLyr, idOrdn, idPrvs);

  desc312.putReference (idT, ref284);

  executeAction (idmove, desc312, DialogModes.NO);

  app.activeDocument.activeLayer.name = lyrN + "Ellie"; Rename shadowlayer

  // =======================================================set opacity

  var idsetd = charIDToTypeID ("setd");

  var desc317 = new ActionDescriptor();

  var idnull = charIDToTypeID ("null");

  var ref288 = new ActionReference();

  var idLyr = charIDToTypeID ("Lyr");

  var idOrdn = charIDToTypeID ('Ordn');

  var idTrgt = charIDToTypeID ("Trgt");

  ref288.putEnumerated (idLyr, idOrdn, idTrgt);

  desc317.putReference (idnull, ref288);

  idT var = charIDToTypeID ("T");

  var desc318 = new ActionDescriptor();

  var idOpct = charIDToTypeID ("PCT");

  var idPrc = charIDToTypeID ("#Prc");

  desc318.putUnitDouble (idOpct, idPrc, shOpacPrc);

  var idLyr = charIDToTypeID ("Lyr");

  desc317.putObject (idT, idLyr, desc318);

  executeAction (idsetd, desc317, DialogModes.NO);

  app.activeDocument.activeLayer = btLayer;

  }

  function getLBounds() {}

  Var ref = new ActionReference();

  ref.putEnumerated (charIDToTypeID ("Lyr"), charIDToTypeID ('Ordn'), charIDToTypeID ("Trgt'));

  DESC1 = executeActionGet (ref);

  DESC1 = desc1.getObjectValue (stringIDToTypeID ('bounds'));

  desc1Top = desc1.getUnitDoubleValue (stringIDToTypeID ('top'));

  desc1Bottom = desc1.getUnitDoubleValue (stringIDToTypeID ('bottom'));

  desc1Left = desc1.getUnitDoubleValue (stringIDToTypeID ('left'));

  desc1Right = desc1.getUnitDoubleValue (stringIDToTypeID ('right'));

  rObj = {top: desc1Top, left: desc1Left, low: right desc1Bottom: desc1Right};

  return rObj;

  }

  function selectLayerTranspByIDX (idx) {}

  var idsetd = charIDToTypeID ("setd");

  var desc205 = new ActionDescriptor();

  var idnull = charIDToTypeID ("null");

  var ref179 = new ActionReference();

  var idChnl = charIDToTypeID ('channel');

  var idfsel = charIDToTypeID ("FSC");

  ref179.putProperty (idChnl, idfsel);

  desc205.putReference (idnull, ref179);

  idT var = charIDToTypeID ("T");

  var ref180 = new ActionReference();

  var idChnl = charIDToTypeID ('channel');

  var idChnl = charIDToTypeID ('channel');

  var idTrsp = charIDToTypeID ("TN");

  ref180.putEnumerated (idChnl, idChnl, idTrsp);

  var idLyr = charIDToTypeID ("Lyr");

  ref180.putIndex (idLyr, idx);

  desc205.putReference (idT, ref180);

  executeAction (idsetd, desc205, DialogModes.NO);

  }

  function substractLayerTranspByIDX (idx) {}

  var idSbtr = charIDToTypeID ("rBST");

  var desc213 = new ActionDescriptor();

  var idnull = charIDToTypeID ("null");

  var ref193 = new ActionReference();

  var idChnl = charIDToTypeID ('channel');

  var idChnl = charIDToTypeID ('channel');

  var idTrsp = charIDToTypeID ("TN");

  ref193.putEnumerated (idChnl, idChnl, idTrsp);

  var idLyr = charIDToTypeID ("Lyr");

  ref193.putIndex (idLyr, idx);

  desc213.putReference (idnull, ref193);

  var idFrom = charIDToTypeID ("from");

  var ref194 = new ActionReference();

  var idChnl = charIDToTypeID ('channel');

  var idfsel = charIDToTypeID ("FSC");

  ref194.putProperty (idChnl, idfsel);

  desc213.putReference (idFrom, ref194);

  executeAction (idSbtr, desc213, DialogModes.NO);

  }

  function makeSquareSelection (top, right, left, btom) {}

  var idsetd = charIDToTypeID ("setd");

  var desc167 = new ActionDescriptor();

  var idnull = charIDToTypeID ("null");

  var ref135 = new ActionReference();

  var idChnl = charIDToTypeID ('channel');

  var idfsel = charIDToTypeID ("FSC");

  ref135.putProperty (idChnl, idfsel);

  desc167.putReference (idnull, ref135);

  idT var = charIDToTypeID ("T");

  var desc168 = new ActionDescriptor();

  var idTop = charIDToTypeID ('Top');

  var idPxl = charIDToTypeID ("#Pxl");

  desc168.putUnitDouble (idTop, idPxl, top of page);

  var idLeft = charIDToTypeID ("Left");

  var idPxl = charIDToTypeID ("#Pxl");

  desc168.putUnitDouble (idLeft, idPxl, on the left);

  var idBtom = charIDToTypeID ("Btom");

  var idPxl = charIDToTypeID ("#Pxl");

  desc168.putUnitDouble (idBtom, idPxl, btom);

  var idRght = charIDToTypeID ('Rght');

  var idPxl = charIDToTypeID ("#Pxl");

  desc168.putUnitDouble (idRght, idPxl, right);

  var idRctn = charIDToTypeID ("Rctn");

  desc167.putObject (idT, idRctn, desc168);

  executeAction (idsetd, desc167, DialogModes.NO);

  }

  function makeElipsoidSelection (top, right, left, btom) {}

  var idsetd = charIDToTypeID ("setd");

  var desc15 = new ActionDescriptor();

  var idnull = charIDToTypeID ("null");

  ref10 var = new ActionReference();

  var idChnl = charIDToTypeID ('channel');

  var idfsel = charIDToTypeID ("FSC");

  Ref10.putProperty (idChnl, idfsel);

  desc15.putReference (idnull, ref10);

  idT var = charIDToTypeID ("T");

  var desc16 = new ActionDescriptor();

  var idTop = charIDToTypeID ('Top');

  var idPxl = charIDToTypeID ("#Pxl");

  desc16.putUnitDouble (idTop, idPxl, parseInt (top));

  var idLeft = charIDToTypeID ("Left");

  var idPxl = charIDToTypeID ("#Pxl");

  desc16.putUnitDouble (idLeft, idPxl, parseInt (left));

  var idBtom = charIDToTypeID ("Btom");

  var idPxl = charIDToTypeID ("#Pxl");

  desc16.putUnitDouble (idBtom, idPxl, parseInt (btom));

  var idRght = charIDToTypeID ('Rght');

  var idPxl = charIDToTypeID ("#Pxl");

  desc16.putUnitDouble (idRght, idPxl, parseInt (right));

  var idElps = charIDToTypeID ("ELP");

  desc15.putObject (idT, idElps, desc16);

  var the idAntA = charIDToTypeID ("AntA");

  desc15.putBoolean (the idAntA, true);

  executeAction (idsetd, desc15, DialogModes.NO);

  }

  function makeShadowLayer() {}

  // =======================================================

  var idMk = charIDToTypeID ("Mk");

  var desc169 = new ActionDescriptor();

  var idnull = charIDToTypeID ("null");

  var ref153 = new ActionReference();

  var idLyr = charIDToTypeID ("Lyr");

  ref153.putClass (idLyr);

  desc169.putReference (idnull, ref153);

  executeAction (idMk, desc169, DialogModes.NO);

  var b = new SolidColor();

  blck. RGB. Red = 0;

  blck. RGB. Green = 0;

  blck. RGB. Blue = 0;

  app.activeDocument.selection.fill (blck);

  app.activeDocument.selection.deselect ();

  }

  function of blur (ss) {}

  var idGsnB = charIDToTypeID ("GsnB");

  var desc65 = new ActionDescriptor();

  var idRds = charIDToTypeID ("Rds");

  var idPxl = charIDToTypeID ("#Pxl");

  desc65.putUnitDouble (idRds, idPxl, ss);

  executeAction (idGsnB, desc65, DialogModes.NO);

  }

  function mtnBlur (ss) {}

  var idMtnB = charIDToTypeID ("MtnB");

  var desc226 = new ActionDescriptor();

  var idAngl = charIDToTypeID ("Marko");

  desc226.putInteger (idAngl, 0);

  var idDstn = charIDToTypeID ("Dstn");

  var idPxl = charIDToTypeID ("#Pxl");

  desc226.putUnitDouble (idDstn, idPxl, ss);

  executeAction (idMtnB, desc226, DialogModes.NO);

  }

  function getSelectedLayersIdx() {/ / get the index of selected layers (position in the layer editor)}

  var selectedLayers = new Array;

  Var ref = new ActionReference();

  ref.putEnumerated (charIDToTypeID ('Dcmn'), charIDToTypeID ('Ordn'), charIDToTypeID ('Trgt'));

  var / / desc = executeActionGet (ref);

  Add var = 1;

  If (hasBackground ()) {alert ('gebunden'); add = 0}

  If (desc.hasKey (stringIDToTypeID ("targetLayers"))) {}

  DESC = desc.getList (stringIDToTypeID ('targetLayers'));

  var c = desc.count

  var selectedLayers = new Array();

  for (var i = 0; i)<>

  selectedLayers.push ((desc.getReference (i). getIndex()) + add);

  }

  } else {}

  Var ref = new ActionReference();

  ref.putProperty (charIDToTypeID ('Rprp'), charIDToTypeID ("ItmI'));

  ref.putEnumerated (charIDToTypeID ('Lyr'), charIDToTypeID ('Ordn'), charIDToTypeID ('Trgt'));

  SRS = (hasBackground)? executeActionGet (Ref), .getInteger (charIDToTypeID ('ItmI')) - 1:executeActionGet (ref), .getInteger (charIDToTypeID ('ItmI'));

  selectedLayers.push (srs);

  }

  Return selectedLayers;

  }

  function hasBackground() {/ / function to check if there is a background layer}

  var RES = not defined;

  try {}

  Var ref = new ActionReference();

  ref.putProperty (charIDToTypeID ("Rprp"), charIDToTypeID ("Nm"));

  ref.putIndex (charIDToTypeID ("Lyr"), 0);

  executeActionGet (ref) .getString (charIDToTypeID ("Nm"));

  RES = true;

  } catch (e) {res = false}

  return res;

  }

  function offsetSelection (x, y) {}

  var idTrnf = charIDToTypeID ("Trnf");

  var desc356 = new ActionDescriptor();

  var idnull = charIDToTypeID ("null");

  var ref314 = new ActionReference();

  var idChnl = charIDToTypeID ('channel');

  var idfsel = charIDToTypeID ("FSC");

  ref314.putProperty (idChnl, idfsel);

  desc356.putReference (idnull, ref314);

  var idFTcs = charIDToTypeID ("CIE");

  var idQCSt = charIDToTypeID ("QCSt");

  var idQcsa = charIDToTypeID ("Qcsa");

  desc356.putEnumerated (idFTcs, idQCSt, idQcsa);

  var idOfst = charIDToTypeID ("Ofst");

  var desc357 = new ActionDescriptor();

  var idHrzn = charIDToTypeID ("Hrzn");

  var idPxl = charIDToTypeID ("#Pxl");

  desc357.putUnitDouble (idHrzn, idPxl, y);

  var idVrtc = charIDToTypeID ("Vrtc");

  var idPxl = charIDToTypeID ("#Pxl");

  desc357.putUnitDouble (idVrtc, idPxl, x);

  var idOfst = charIDToTypeID ("Ofst");

  desc356.putObject (idOfst, idOfst, desc357);

  var idIntr = charIDToTypeID ("Introduction");

  var idIntp = charIDToTypeID ("Intp");

  var idBcbc = charIDToTypeID ("Bcbc");

  desc356.putEnumerated (idIntr, idIntp, idBcbc);

  executeAction (idTrnf, desc356, DialogModes.NO);

  }

• 'Reports' grey menu (the link is disabled)

  Hello

  The menu of reports does not work and I do not know why.

  I tried with 2 different ID, 4 different clients and 2 different browsers (IE and Firefox).

  The photo is attached. You can see the reports link is formatted differently (it has shadow). In Internet Explorer, the shadow appears. In FireFox, no shadow. In both cases, clicking on the reports does not display the menu drop-down.

  Thanks a lot for Singapore.

  E1, VCAP-DCD

  If you want to add systems to an existing project:

  1. open the project/business
  2. administration Menu > my projects
  3. Locate the project name > click on the name of the project
  4. go in the select systems tab, then select systems
  5. apply.

  If you create a new project, there is a step in the wizard to select the systems.

  Best regards

  Jon Hemming

• Titles of the shadow

  I use PE 9.

  There is a problem with shadows in titles.

  The angle, distance and sweetness are always 1. I can change these numbers, and they are used. But when I return, I don't see what numbers I've used. It is also a problem when I type a number and press ENTER. The shadow screen closes.

  It must be a bug.

  It might be.

  Have you reported it to Adobe?

• Report to concatenate several lines into one line

  I have three tables:
  1 project Pk = proj_id
  2 Resources_on_Project Pk = Resources_on_proj_id Foreign_key = proj_id
  3 cost Pk = cost_id Foreign_key = proj_id
  
  columns in the table:
  
  Project: proj_id, proj_name, proj_description
  Resources_on_Project: Resources_on_proj_id, proj_id, id_ressource
  cost: cost_id, proj_id, cost_type, cost_incurred
  
  the table relationships:
  
  Project: Resources_on_project 1:m (project has several resources in Appendix)
  Cost of the project: 1:m (project has many costs in annex)
  
  Data:
  
  Project:
  PROJ_ID, proj_name, proj_description
  1, CDM, Advisory Services
  
  2, efficient lighting, efficient ESCO
  
  Resources_on_project
  Resources_on_proj_id, proj_id, id_ressource
  1, 1, 1
  2, 1, 2
  3, 2, 3
  4, 2, 4
  
  Cost:
  cost_id proj_id cost_type cost_incurred
  1.1, food, 1200
  2.1, travel, 2000
  3.1, trip, 3500
  4.1 food, 1200
  5.1, trip, 1400
  6.1, travel, 1200
  7,2 trip, 2000
  8.2 food, 1200
  9.2, trip, 1300
  10.2, food, 2000
  11.2, travel, 800
  12.2, travel, 1150
  13.2, food, 3000
  14.2, food, 1000
  15.2, food, 2400
  
  
  First project has 2 resources attached to it and 6 different costs.
  Second project includes 2 resources and 9 heads of different costs.
  
  I want a report that gives me:
  
  Proj_name, Proj_description, id_ressource, cost_incurred
  Advisory services CDM 10500 1/2
  
  ESCO effective effective lighting 14850 3/4
  
  
  I wrote a query:
  «Select «PROJECT»» PROJ_NAME' as 'PROJ_NAME. "
  ««PROJECT»» PROJ_DESCRIPTION' as 'PROJ_DESCRIPTION. "
  sum (COST. COST_INCURRED) as "COST_INCURRED."
  'RESOURCES_ON_PROJECTS '. "" RESOURCE_ID ' as 'RESOURCE_ID.
  'COST', 'cost ',.
  "RESOURCES_ON_PROJECTS" "RESOURCES_ON_PROJECTS"
  'PROJECT' 'PROJECT '.
  where "PROJECT. "" PROJ_ID "=" RESOURCES_ON_PROJECTS. " "" PROJ_ID.
  and 'PROJECT '. "" "PROJ_ID '=' COST. PROJ_ID.
  PROJECT group. PROJ_NAME, PROJECT. PROJ_DESCRIPTION, RESOURCES_ON_PROJECTS. ACCOUNTABLE_RESOURCE_ID
  
  the result is:
  
  Advisory services CDM 1 10500
  Advisory services CDM 2 10500
  ESCO effective effective lighting 3 14850
  ESCO effective effective lighting 4 14850
  
  It gives a new line for each different resource.
  
  
  I want to:
  Advisory services CDM 10500 1/2
  ESCO effective effective lighting 14850 3/4
  
  any help will be appreciated.
  
  Published by: Rahul Gupta on September 7, 2009 16:07

  Rahul Gupta says:
  Shadow of Blu,

  It's exactly what I wanted. But the measures specified by you are not clear for me.

  can you let me know how I can implement?

  Okay... Let's take the internal selection...

  SQL> select proj_name
    2        ,proj_desc
    3        ,resource_id
    4        ,cost
    5        ,row_number() over (partition by proj_name order by resource_id) as rn
    6  from output
    7  /
  
  PROJ_NAME PROJ_DESC               RESOURCE_ID       COST         RN
  --------- ----------------------- ----------- ---------- ----------
  CDM       Advisory Services                 1      10500          1
  CDM       Advisory Services                 2      10500          2
  Efficient ESCO Efficient lighting           3      14850          1
  Efficient ESCO Efficient lighting           4      14850          2
  
  SQL>
  

  This affects a line number for each line, each group proj_name (partition). Line numbers are allocated in the order of the id_ressource.

  Now, using a (hierarchical) query connection we create a hierarchy of folders as well as RN = 2 is considered to be a child of RN = 1, etc..

  SQL> ed
  Wrote file afiedt.buf
  
    1  select level
    2        ,lpad(' ',(level-1)*2,' ')||x.proj_name as proj_name -- indent for hierarchical illustration only
    3        ,x.proj_desc
    4        ,x.resource_id
    5        ,x.cost
    6        ,x.rn
    7  from (
    8        select proj_name
    9              ,proj_desc
   10              ,resource_id
   11              ,cost
   12              ,row_number() over (partition by proj_name order by resource_id) as rn
   13        from output
   14       ) x
   15  connect by proj_name = prior proj_name and rn = prior rn + 1
   16* start with rn = 1
  SQL> /
  
       LEVEL PROJ_NAME       PROJ_DESC               RESOURCE_ID       COST         RN
  ---------- --------------- ----------------------- ----------- ---------- ----------
           1 CDM             Advisory Services                 1      10500          1
           2   CDM           Advisory Services                 2      10500          2
           1 Efficient       ESCO Efficient lighting           3      14850          1
           2   Efficient     ESCO Efficient lighting           4      14850          2
  
  SQL>
  

  Now, using the sys_connect_by_path function we can get it to collect the data, because it passes through to the bottom of the hierarchy...

  SQL> ed
  Wrote file afiedt.buf
  
    1  select level
    2        ,lpad(' ',(level-1)*2,' ')||x.proj_name as proj_name
    3        ,x.proj_desc
    4        ,x.resource_id
    5        ,sys_connect_by_path(resource_id,'/') as resources
    6        ,x.cost
    7        ,x.rn
    8  from (
    9        select proj_name
   10              ,proj_desc
   11              ,resource_id
   12              ,cost
   13              ,row_number() over (partition by proj_name order by resource_id) as rn
   14        from output
   15       ) x
   16  connect by proj_name = prior proj_name and rn = prior rn + 1
   17* start with rn = 1
  SQL> /
  
       LEVEL PROJ_NAME       PROJ_DESC               RESOURCE_ID RESOURCES        COST         RN
  ---------- --------------- ----------------------- ----------- ---------- ---------- ----------
           1 CDM             Advisory Services                 1 /1              10500          1
           2   CDM           Advisory Services                 2 /1/2            10500          2
           1 Efficient       ESCO Efficient lighting           3 /3              14850          1
           2   Efficient     ESCO Efficient lighting           4 /3/4            14850          2
  
  SQL>
  

  Now, we can store up to the sys_connect_by_path to eliminate the left "/" simply by using the TRIM function.
  We also need to do however is to choose only the lines that have reached the bottom of the hierarchy (the nodes). We have a pseudo-device column we can refer to called CONNECT_BY_ISLEAF...

  SQL> ed
  Wrote file afiedt.buf
  
    1  select level
    2        ,lpad(' ',(level-1)*2,' ')||x.proj_name as proj_name
    3        ,x.proj_desc
    4        ,x.resource_id
    5        ,ltrim(sys_connect_by_path(resource_id,'/'),'/') as resources
    6        ,x.cost
    7        ,x.rn
    8        ,connect_by_isleaf
    9  from (
   10        select proj_name
   11              ,proj_desc
   12              ,resource_id
   13              ,cost
   14              ,row_number() over (partition by proj_name order by resource_id) as rn
   15        from output
   16       ) x
   17  connect by proj_name = prior proj_name and rn = prior rn + 1
   18* start with rn = 1
  SQL> /
  
       LEVEL PROJ_NAME       PROJ_DESC               RESOURCE_ID RESOURCES        COST         RN CONNECT_BY_ISLEAF
  ---------- --------------- ----------------------- ----------- ---------- ---------- ---------- -----------------
           1 CDM             Advisory Services                 1 1               10500          1             0
           2   CDM           Advisory Services                 2 1/2             10500          2             1
           1 Efficient       ESCO Efficient lighting           3 3               14850          1             0
           2   Efficient     ESCO Efficient lighting           4 3/4             14850          2             1
  
  SQL>
  

  So now we can filter only the lines where CONNECT_BY_ISLEAF = 1, also remove the output columns and calculates values etc, we don't need to see.

  SQL> ed
  Wrote file afiedt.buf
  
    1  select x.proj_name
    2        ,x.proj_desc
    3        ,ltrim(sys_connect_by_path(resource_id,'/'),'/') as resources
    4        ,x.cost
    5  from (
    6        select proj_name
    7              ,proj_desc
    8              ,resource_id
    9              ,cost
   10              ,row_number() over (partition by proj_name order by resource_id) as rn
   11        from output
   12       ) x
   13  where connect_by_isleaf = 1
   14  connect by proj_name = prior proj_name and rn = prior rn + 1
   15* start with rn = 1
  SQL> /
  
  PROJ_NAME       PROJ_DESC               RESOURCES        COST
  --------------- ----------------------- ---------- ----------
  CDM             Advisory Services       1/2             10500
  Efficient       ESCO Efficient lighting 3/4             14850
  

• How can I report a hacked account to get my money back

  I was sent from iPhones that are not mine. think I was hacked, how do I report it and request a refund

  iTunes Store-what to do if your account has been compromised

• report of kernel panic: kernel_task

  Who may be reading - please advice!

  I had a few panic kernel last week:

  -kernel panic started using photoshop lighroom cc

  -Restart computer, panic came 20 minutes later

  -computer restarted, did not use any design programs or photo, panic took place 10 minutes later

  -connected temporarily separated I have that has no file - well just to check email, watch movies

  -restarted the safe mode and saved all my valuable info to my external hard drive

  -checked the material through computer test = all very well

  -re-installed the OS form scratch and re-installed programs.  Have stayed on El capitan and did not improve with Sierra still.

  -panic happened once when I tried to use a cc design program.  Used CS6 version and it was very good.

  -panic occurred when I tried to open my library lighroom. Installed LIghroom Cs5 (old version) and started a new library - has worked

  -use of regular program is very well: e-mail, web surfing, viewing

  -last night worked on lightroom for a good 45 min - 1 h, and then passed to photoshop cs6 for 20 min - computer has a different kernel panic

  -just today, I worked on illustrator cs6 for 30 min and the computer has a different kernel panic.

  looking at the reports, most of them joined kernel_task

  My computer:

  MacBook Pro retina mid 2012

  I7 clocked at 2.6 GHz, DDR3 8 GB 1600 MHz RAM

  Intel HD Graphics 4000 1536 MB

  I watched the last report and it wouldn't let me post because of "caractΦres" (don't know where)

  try to replace underscores with hyphens characters, or posted to an account free pastebin.com and give the link (NOT a download - anyone who thinks clearly will download a file of mystery).

• Strange shadows on the Sierra of the Mac OS on an external monitor

  After upgrading to Mac OS Sierra, I noticed that there are these strange shadows. It of almost like the gradient of a shadow is not fluid and smooth:

  Screenshots:

  https://www.dropbox.com/s/dj6g3x68c9ggwez/screenshot%202016-09-24%2008.34.42.PNG? DL = 0

  https://www.dropbox.com/s/2ql2prnhn2k27rz/screenshot%202016-09-24%2008.35.43.PNG? DL = 0

  Is this normal, or is there a problem? Recommend a fix?

  I'm on Mac mini (mid-2011) and a screen LCD Dell UltraSharp U2913WM 29 inches.

  ... However, if the screenshots are picking up, it seems less like a problem of monitor and more like an incompatibility of graphics cards with MacOS Sierra?

  This seems to be quite normal. The windows are translucent, and what I see, this is the result of the image behind the window.

  It was the same thing in El Capitan (and, I suppose, Yosemite, as well).

  You can go to system preferences - > accessibility-> display and select "reduce transparency" if it bothers you.

• WARNING: Beware of Trusteer report installation on macOS Sierra

  Just a word of warning to users who have the version for macOS Sierra - I'd be suspicious about installing and using Trusteer report of IBM software as it doesn't seem to work correctly with Safari 10. Although maybe it's not the case for all devices running Safari 10, it certainly caused problems on my Mac and someone else on this thread:

  Safari 10 high CPU usage

  High CPU usage (and therefore high battery drain) is the main problem I've experienced with that. If you have already installed report, maybe try using Safari and check Activity Monitor CPU usage to see if this problem is widespread or limited to certain devices (mine included).

  Report was constantly beset with problems on my Mac - in OS X El Capitan icon appears in Safari 9.1.3; in the public beta of macOS Sierra the installer kept crashing and causing my Mac restart unexpectedly. and now high CPU utilization when you use Safari 10.

  Everyone encountered problems with the report? For now, I don't particularly want to reinstall the software, despite its security perks - headaches constant software involves dissuaded me to use it for the moment.

  I agree whether Trusteer report on a Mac installing problems.