Titles of the shadow

Similar Questions

• When I defragment I get message "suspended for the shadow copy of volume.

  Original title: Defrag problem

  When I defragment I get message 'suspended for the shadow copy of volume' whatever that means?

  The VSS Service should not be run unless you do some kind of a backup that uses it.

  Are you using any kind of third-party backup software that would force the VSS Service to run all the time?

  If defrag used to work, what do you think might have changed since the last time it worked correctly?

  I have my VSS Service set to "Manual" - in this way, it not start with XP on a restart and run all day to do nothing, but he will start by itself when I do a backup and stop when the backup is complete (it runs when you need).

  You check the VSS Service, click Start, run and enter in the box:

  services.msc

  Click OK to open the Services applet and find the Volume Shadow Copy Service.

  Select the status and Startup Type columns.

  If you do not have a backup at this time there, the Status column must be empty (not started) and the Startup Type should be set to manual.

  If this is not the case, let a right-click on the VSS Service, properties, Stop (to stop it), change the Startup Type to manual and OK your way out (ensure that it is reactivated by itself).  If it starts up again without a valid reason, you need to understand why and fix it.  Restart to make sure the changes 'stick '.

  See if your defragmentation works when the VSS Service does not work...

• How to clear the box colored under the titles of the icons

  original title: the DESKTOP ICONS

  THE ICONS ON MY DESKTOP HAVE A BOX OF COLOR UNDER THE TITLES OF THE ICONS.  HOW TO MAKE THAT BOX OF COLOR IS IN GO?  I DON'T KNOW WHAT I HIT THAT PUT IT THERE.  I CHANGED THE LOOK OF MY DESKTOP. WHAT I WANT TO SEE IS THE ICON TITLE.

  Hi Deb52,

  To get the background on the icons, click Start-> settings-> Control Panel-> system-> advanced-online Performance-> settings-> Tickmark "Shadows fall to use the desktop icon labels"-> Apply-> ok.

  I hope this helps.

• How to remove the shadow of the screen and the fonts?

  Original title: hot to remove the shadow on the grid.

  My screen is difficult to read. The letters that all seem to have a shadow behind them. I tried to change the fonts, colors, etc. in the Customize menu, but this did not help. Is it possible to restore the settings to the factory settings screen?

  
  

  You can do a system restore before the moment that it happened.

  1. Click Start
     

     type system restore in the Search box, and then clickSystem Restore in the programs list.

     

     If you are prompted for an administrator password or a confirmation, type your password or click continue.

  2. In the System Restore dialog box, click choose a different restore point, and then click Next.
  3. In the list of restore points, click a restore point created before you started having the problem, and then click Next.
  4. Click Finish.
  http://support.Microsoft.com/kb/936212

  You can also check this:

  http://social.answers.Microsoft.com/forums/en-us/vistaappearance/thread/f5392f31-10ed-407D-ba5a-5b065e3b8663/

• My backup system to stop working on my computer: "backup failed from Windows while trying to read from the shadow copy on one of the volumes to back up.

  My back by abandoning work on my computer, it worked for the last 3 years and all of a sudden I have an error message "failure of the Windows backup while trying to read from the shadow copy on one of the volumes to back up. Please check in the case where the relevant error logs. "How can I fix this so I can get a full backup?

  original title: shadow copy error
  Hello
   

  See the methods listed in the article mentioned below and check with the question.

   
  Windows backup or restore 0 x 80070001, 0 x 81000037 or 0 x 80070003 errors
  http://support.Microsoft.com/kb/973455
   

  I hope this helps!

• There is not enough disk space to create the shadow copy of volume of storage location 0 x 80780119

  Original title: create system image error - not enough disk space?

  I am trying to create a system image on my external hard drive reformatted with over 400 GB of free space. I get the following error message: «is not enough disk space to create the shadow copy of volume of the vault...» 0 x 80780119"backup should take up to 82 GB of disk space. I have more then enough available space.  External hard disk is formatted NTFS. My internal hard drive has more than 150 GB free. 64-bit Windows 8

  Any suggestions?

  Hi Mohammad,.

  I thought that's kind of a joke to check the drive on my brand new Microsoft Surface, but I figured it's worth a try. It worked! You are a genius, thanks man.

• How can I change the title of the folder?

  Im trying to organize my notes and consolidate a bit, but I need different titles. I can't change the title even with edit. Also, is it possible to pass information from one folder to another?

  To change the title of the file, switch to the folder view (who has the list of places, your notes are kept: all iCloud, Notes, file, folder, deleted recently) and press the button change. While in editing, tap the folder you want to change the name to once and it will display a window where you can change it.

  You can move the notes of any place anywhere. Switch to the folder view and click the folder you want to move the notes of. Click on edit, select the notes that you want to move, click on move and then select the folder you want to move.

  See you soon,.

  GB

• What is the title of the highest element side of 2016?

  I have securities (table 1::B), which are labeled by year (table 1::A) and have a value in percentage (table 1::E) assigned to them.

  In table 2, I used an AVERAGEIF formula to determine the average percentage of anything with the label of 2016. I would also like to column B of table 2 to find the name of the actual title (table 1::B) whose value in higher percentage (table 1::E) for the corresponding year (table 2::A) and (table 1::A). Essentially, the question being answered is "what is the title of the highest rated power (as a percentage) issue of 2016?

  Moreover, I can then apply this same concept to get the average value of what that is a decade in particular and also list the title albums for each decade? The tricky part here is that I can simply use a direct statement because the decades are listed as 'the years 2010', "2000 years", etc. which do not appear in the table 1 original. Any ideas?

  Thanks for all the help. It's just a fun side project that I sometimes like to do and then I often learn new concepts that I can use to assess the data in my job as a teacher.

  

  Hi Minrali,

  Here is one approach. I started with 2 additional columns in the source table.

  

  F2 = MAX (OFFSET ($A$ 1, MATCH(A2,A,0) −1, 4, COUNTIF(A,A2), columns))

  If your column % is not the 4th column a you need ot change the '4' in this formula.

  It is filled to the bottom

  

  G2 = INDEX (B, MATCH(F2,E,0), column-index, area-index)

  Filled down.

  If you want to eliminate the F column that the formula would be

  INDEX (B, match (Max (offset ($A$ 1, match(a2,A,0) −1, 4, COUNTIF(A,a2), Columns)), E, 0), umn-index, the index of surface)

  He combines the two.

  

  And in fact. I would filter the table so that the years without values are hidden. Or you could wrap it in IFERROR() If you do not want to see the flags of the error.

  Quinn

• I have a large collection of big slideshows in iPhoto, created over the years with captions from the titles of the photos. How can I keep these slide shows subtitled in Photos?

  I have a large collection of big slideshows in iPhoto, created over the years with captions from the titles of the photos. How can I keep these slide shows subtitled in Photos?

  You can't keep slideshows as captioned photos.  Slide shows get migrated in the form of albums for the Group of photos is maintained.  But Photos don't have the ability to add descriptions to the slide show so that they would have to be manually added to each slide automatically.

  However, a possible solution would be to export every slide show in iPhoto as a Quicktime movie file. Which will keep the titles and descriptions on each slide.  The resulting QT files can be imported into the iPhoto library before migration or photo library after.

  

• Tab title shows the connection...

  I am able to navigate on all Web sites, but the titles of the pages opened by me tab all show 'connection '.... ' or 'new tab '.
  I have a wire keeping trouble follow which tabs were open pages since show all the same text mentioned above.

  I have attached an image file showing the problem. Remember that all tabs have loaded them as web pages.

  What could be the problem?

  This problem may be caused by an extension that is not working properly.

  Start Firefox in Safe Mode to check if one of the extensions (Firefox, Tools/menu key > Modules > Extensions) or if hardware acceleration is the cause of the problem.

  • Put yourself in the DEFAULT theme: Firefox, Tools/menu key > Modules > appearance
  • Do NOT click on the reset button on the startup window Mode safe
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• How can I remove the title of the Email and date/time printing even?

  Hi people,
  First of all, thanks to everyone at Mozilla Thunderbird and Firefox!
  I want to do is eliminate the subject of the E-mail (top left corner) and the date and time (lower right corner) when you print an email.
  Thanks in advance... Mark

  "File menu (alt + F) > layout > margins and headers/footers.

  Delete the title in the box with the title inside. and even with that with time. Change the two voids.

• How can I remove the title of the page above the file, Edit, View, history, bookmark tab?

  How can I remove the title of the page above the file, Edit, View, story, tab bookmarks in firefox

  In Firefox, 29 and 30 of Firefox:

  button '3-bar' menu > customize

  Bottom left, click the title bar button to enable and disable the title.

  In Firefox 28, I actually do not remember!

  I would be remiss in my duty if I didn't remind you:

  • 28 Firefox is not safe: Mozilla has disclosed its known security flaws.
  • You can change 30 Firefox in order to restore many features of previous versions of Firefox user interface using the techniques in this article (or with the help of volunteers from the forum): How to make the new look of Firefox as the old Firefox.

• search with the keyword in the title of the album - showing not

  When I got iPhotos / before I upgraded to El Capitan, voluntarily I named a couple of albums with the same word so I can see them all together in the search for this word.  Now, when I do a search, a list of all albums showing on the right.  The photos are not displayed.  Is it possible to view the photos instead of just the titles of the album?  Thank you.

  Now, when I do a search, a list of all albums showing on the right.

  You can click on the albums in the list to open them one by one. But research will not display the photos in the album. You will need to add the keyword to the individual photos in the album to show the photos in the list.

• How to restore the title bar? Title of the page displays only the tabs - this is not good enough

  I'm used to be able to see the title of the page in the title bar. Firefox has removed this feature, and now I have to mouse over the tab to display the title of the page. It is another example of extracting the characteristics that people use for reasons that I don't understand. So far, I had to install two 'add ons' to restore the common features on previous versions - and always on IE and Chrome.

  1. Right-click on a zone empty of the tab bar and select Customize.
  2. Click the button on the title bar in the lower left corner.
  3. Click the Customize output button when finished.
  • Customize controls, buttons, and Firefox toolbars

• Firefox 29,0 deleted has the titles of the pages at the top of the browser - how can I get back them?

  Pretty explicit in the title of the thread. Page titles have gone with 29,0 - how to make a comeback?

  Hello UnderPar, go to the new firefox menu

  

  > customize and activate the down title bar to the left of this window...