Reactivation

Similar Questions

• I want to reactive my credit card

  HI my credit card was spended as I had active illegal on my iTunes but its been resolved how can I reactive my card now pls

  I want to talk to someone

• "Reactivation" corrected automatically on "disable."

  I tried typing "reactivate", and it automatically corrected to 'disable '. Twice. Why? I say again, WHY? I tried to type a word which * is * a Word, in fact finally I was walking on a dictionary, he was there. Is not correct automatically supposed to correct misspelled words or whole words that he thinks you type? It was neither. I don't understand. WHY? What indication would have me the software I wanted to type a different word that what I typed in fact really? Consciously? He thinks I'm drunk? I really don't understand. Is there someone familiar with the type of coding and processes that go into the AutoCorrect function, and why he seems determined to "correct" the legitimate words? He did it twice. Of course, me trying to type "reactivation" was so far-fetched that I could not possibly try to type, and I had to have made a mistake. And then I made the mistake again, whoopsies! Guess I'm just a lovable crazy, oh gee the antics that I enter, try to type words and say stuff that makes sense. I was a ward of the State.

  TL; DR

  However:

  The solution to your problem is in two steps:

  Step 1:

  Have one of these:

  

  Step 2:

  Display settings-> general-> keyboard-> text replacement

  Add the new sentence "reactivate" (you do not have to create a shortcut) and this is!

  Your phone is no longer trying to AutoCorrect disable to reactivate.

• Satellite A100-049 screen remains empty when reactivated from sleep mode

  Intermittently, have been left for a while my screen A100-049 remains empty when reactivated from sleep mode. It does not meet the access keys and have checked the settings which seem to agree.

  Notice that in this case the power button remains 'blue' and not to return to 'Orange flashing. Is this a common problem?

  Hello

  What do you with the mode 'sleep'? Do you mean the hibernation mode or the mode booth? What operating system do you use?

  Listen buddy. It's really not easy to say why it happens without running diagnostic tests. I think you should try to update the graphics driver and check if you are using the latest version of the BIOS. Two updates might be useful in resolving these issues

  Good luck

• Disable the automatic reactivation after opening of the screen

  Hello

  is it possible to disable the automatic reactivation after the idle state by opening the screen? If so, how?

  Greetings
  Mr. Auer

  Hi, Matthias

  When the laptop is in sleep or Hibernate mode after the opening of the screen for laptop wakes up automatically and display will be automatically ON.

• I disabled my I have cloud and only recently reactive it on my phone and the photos that I had downloaded went is it possible to recover those important photos

  HI I had turned off my iCloud on my iPhone just reactive and 6 it but the pictures that I had downloaded before disabling disappeared is it possible to recover those important photos

  Welcome to the Apple community.

  Were the photos from your camera, photo album or photo library iCloud stream.

• Monitor the problem flashing on the reactivation of the computer.

  Monitor the problem flashing on the reactivation of the computer.

  I have a new HP laptop G60 - 243 CL of Costco and a new HP W2207h monitor. The screen flashes when the laptop wakes fashion "sleep" with the HDMI cable connected. It works very well with the VGA cable. Any assistance in finding the cause would be much appreciated. Here is my hardware spes and a newspaper detailed observations.

  Thanks in advance,

  Paul

  --

  HP W2207h monitor

  680 x 1050 hz @60

  Laptop:

  HP G60 - 243 CL

  AMD Turion X 2 RM - 72 2.1 GHz

  3 GB RAM DDR2

  320 GB SATA, 5400 RPM HARD DRIVE,

  NVIDIA GeForce 8200 M G, with up to 1407 MB total graphics memory (shared).

  16 "16:9 1366 x 768 display

  Drive x drive LightScribe 8 with support double layer
  HDMI

  Here is my log.

  25/01/09

  1 unpack the monitor. With mobile connection cables on: HDMI, USB, power Turn on the monitor. It flashes. Black for about 2 seconds, then the light for a split second, repeat, ongoing. Turn off monitor, the driver of the CD W2207h monitor, restart. Monitor works normally.

  The monitor HP w2207h Readme says driver using driver Nvidia 10.65 or later version.

  The Control Panel on the computer laptop G60, NVIDIA GeForce 8200 M g: Device driver 7.15.11.7614, 11/07/2008 (this is the latest driver from the HP support page. See on 27-01-08 below).

  Install W2207h Monitor driver CD and restart the computer. Control Panel, device, Manager I see two monitors, the two "monitor PNP generic", first Hardware ID "MONITOR\HWP26A8", the second "MONITOR\SEC314C", both with the 6.0.6001.1840 driver (longhortn_rtm.080118 - 1840), I wonder if, maybe, the pilot did not.

  2 put the laptop into sleep mode. Wake the portable computer and monitor flashes market, as described in (1). Image appears normally while the monitor is turned on for fraction of a second intervals. If reboot laptop, follow the work properly.

  Occasionally, flashing monitor heal without rebooting. Out of about 10-15 tent: once the monitor began to function properly while the computer shuts down. Once the monitor was OK on the reactivation of the laptop. Once, while the screen flashes, I removed the USB cable and the monitor started working. None of this is repeatable.

  3 removed the HDMI cable and started using the VGA cable and an audio cable. No more flashing on the reactivation of the computer. Very repeatable. About 7 7 times.

  01/26/09

  Control Panel, two monitors, Device Manager, the two "monitor PNP generic," first of all we have the Hardware ID "MONITOR\HWP26A8", second is "MONITOR\SEC314C", both with the 6.0.6001.1840 driver (longhortn_rtm.080118 - 1840), I wonder if, maybe, the pilot did not.

  27/01/08

  Download NVIDIA drivers

  Downloaded from Nvidia support: Version 179,28, 2008-12-18, 179.28_notebook_winvista_32bit_beta.exe Beta (attention: are not supported by the laptop to the manufacturer.)

  HP support: Version 7.15.11.7614 has, 2008-09-08, sp40385.exe (same version that is installed.

  Version of the driver installed is the same that the one on HP support site, so did not not update driver.

  w2207h monitor download driver

  Download and install A Rev 2.0, 4.0.100.1189, 2008-10-16

  Version of the file now reads 6.0.6001.18000 (longhorn_rtm.080118 - 1840), I think it's the same as the driver already installed.

  Flashing problem is unchanged.

  –

  end

  It was the monitor! I brought my laptop and a HDMI cable at Staples where I bought the monitor and tried on the w2207h on set. It has worked well. Took the phone in and out of fashion 'sleep' several times. I'm in the store week return policy 2 stables will replace it. The seller was very accomodating to let me try different monitors with HDMI and VGA cables and my laptop while I was there. I even brought in a large piece of cardboard to protect the ceiling :).

• If you change a value on a disabled control programmatically, become reactivated?

  I'm trying to solve a problem on a surface that worked before I added new codes...

  I have a cluster with Boolean LED, ring type dropdown menus and text boxes.

  Before... I've had situations where I've disabled the entire cluster... and it worked, and I even felt on the mouse down, that someone was trying to make changes while he was disabled and I put forward a teling user message that them no change is possible.

  Now... I have added code, it'll make the updates on the value of the function from code LEDs now a serial connection. I am wanting to change the value of the LED (and possibly the other controls on the cluster) even if it is disabled.

  However, now when I click on the disabled so-called cluster... I can now change the value of the LED... as it is not off more, but the code for the Message of the user triggers always.

  Just to test things... I set the disabled property of 1 to 2... so it would be totally disabled and grayed out... THAT is not the case now... so, I'm stumped.

  My first thoughts were... may LV is the reactivation of some of its parts when I change programmatically a value of something is disabled on the Panel before... is this the case?

  Thank you

  Cayenne

  In a cluster when you update the value of a disabled control, it will be updated and you can read the value programmatically, but if the same command that you try to access it manually through the front side you can not access this similar case with the disabled grayed out property. So that you can understand the property is given to show the user that the control is in-accessible, but it will not be reactivated unless you change the disabled property of the control.

• How to trigger an alarm in the DSC module if, after alarming reactivation

  My application monitors a large number of tags.  I set up the user interface to allow the user to temporarily disable the alarm for some time.  For example, if someone opens the door to a freezer, then it closes, the label of the temperature goes into alarm.  Since we know why the alarm has occurred, the operator can deactivate the alarm for a couple of hours.  When the alarm is reactivated for this tag, if it is still in the range of alarm, he should be back in alarm.  The problem is that it is not.  Is there a way to programmatically alarm status?  I use also the alarms & events display component ActiveX to acknowledge alarms, so I prefer not to use the user defined alarms.  Any ideas would be greatly useful.

  Tom

  
  

• reactivation from win7

  Hello

  I have a pavillion g6. He had win 7 home basic oa mea. My t.o.d. was damaged, so I lost everything and I do not have a recovery dvd. I have a product key in my computer. If I download the iso file, can I turn it back on with the same key on the net.

  Thank you.

  Hello

  Yes, and must be the same version of Windows (in your case: Home Basic). Please also see the following note:

  http://social.Microsoft.com/forums/en-us/f5f9986f-2f76-49b1-a8f9-45d8b4179768/reactivating-Windows-7-product-key?forum=genuinewindows7

  Kind regards.

• How can I disable the Mappoint 2006 for the installation and the reactivation on new computer

  How can I disable the MapPoint 2006 for the installation and the reactivation on new computer

  This forum is for posting comments on the web site of Microsoft Answers, only not to ask questions of Mappoint.

  Mappoint forum is here: http://social.microsoft.com/Forums/en-US/streetsandtrips/threads

• PLEASE, HOW DO I REACTIVE MY HOTMAIL ACCOUNT IT WAS SUDDENLY CLOSED.

  Please, how can - I reactive my hotmail account, it was suddenly closed and I received an email from Microsoft Help, sent to my yahoo account and they said I have to fallow instructions recovery reset a password which I did but I do not remember some information when I opened my hotmail account.

  Note. I am using my husband's hotmail account to sign here. I CAN'T USE MY HOTMAIL ACCOUNT AND I IN MANY INFORMATION HOTMAIL FILES.

  Hello

  Answers is homologous supported and has no real influence on Hotmail.

  HotMail has its own Forums, so you can ask your questions there.

  Windows Live Solution Center - HotMail - HotMail Forums Solutions
  http://windowslivehelp.com/

  Hotmail - Forums
  http://windowslivehelp.com/forums.aspx?ProductID=1

  Hotmail - Solutions
  http://windowslivehelp.com/solutions.aspx?ProductID=1

  How to contact Windows Live Hotmail Support
  http://email.about.com/od/hotmailtips/Qt/et_hotmail_supp.htm

  Windows Live Hotmail Top issues and Support information
  http://support.Microsoft.com/kb/316659/en-us

  Compromised account - access unauthorized account - how to recover your account
  http://windowslivehelp.com/solution.aspx?SolutionID=6ea0c7b3-1473-4176-b03f-145b951dcb41

  Hotmail hacked? Take these steps
  http://blogs.msdn.com/b/securitytipstalk/archive/2010/07/07/Hotmail-hacked-take-these-steps.aspx

  I hope this helps.

• reactive my hotmail account

  Hi, I'm trying to open my hotmail account (* address email is removed from the privacy *) but I think that someone hake so it is blocked now and I'm trying to reopen several times but I failed coz I don't remmember my answer secret and since a long time, I didn't use my alternative e Yahoo mail so it is also blocked can you help me using my real password I can send it to you and you can the check and make sure that I am the real user and reactive my new email coz there are many e mail important in it and all my family and friends to contact pls reply to this email (* address email is removed from the privacy *)

  Hi nagwaessa,

  To support more specialized on Hotmail issues, post your request here

  Windows Live Forum - http://windowslivehelp.com/

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer
  ***************************************************************************

• I reinstalled and reactivated Windows 7 Ultimate 64 bit.

  To be able to run additional memory, that I had to change the motherboard in my computer. So it took to reinstall Windows 7 Ultimate 64-bit and reactiving the software. No problem. I then tried to download updates only to get the message that they were not important updates available and when I checked on my history of update, I got a list of all the updates I had downloaded on my old configuration. So far I had not downloaded a single update on the new installation of Windows. How can I get back all these old updates?

  To be able to run additional memory, that I had to change the motherboard in my computer. So it took to reinstall Windows 7 Ultimate 64-bit and reactiving the software. No problem. I then tried to download updates only to get the message that they were not important updates available and when I checked on my history of update, I got a list of all the updates I had downloaded on my old configuration. So far I had not downloaded a single update on the new installation of Windows. How can I get back all these old updates?

  Open Control Panel > programs and features. Now click the installed updates link in the left frame. Is this a list of installed updates show?

  If it doesn't then you fact not do a new install of Win 7, which means that you do not reformat the hard drive and installed all updates have been preserved.

  If there is no list of the updates installed then suggest you go here: How to get the latest version of the Windows Update Agent to help manage updates on a computer

  Click on the link under 'x 64' computer and Save the download, windowsupdateagent30 - x 64 .exe .

  Once the download completes browsers and close all programs open. Install windowsupdate30 - x 64 .exe. Reboot the system after installation and see if it can be updated now.

  MowGreen Services update - consumer safety

• Reactive power meter in Multisim

  Hello, is there a way to create a phase three reactive power meter using the components/instruments in Multisim v12?

  Thanks in advance!

  Hi Tobster

  (1) Yes... Conexion Aron is the same thing with 2 wattmeter method.

  (2) the connection is good. But the formula is Q = sqrt (3) (XWM2-XWM3)

  (XWM2 + XWM3) =P

  SQRT (3) (XWM2-XWM3) = Q

  S = P + JQ

  
  

  ATT:

  Alvaro Tasco

• Reactivation of the EZ always goes to the Wakeup EZ settings screen after waking up

  Hello - I have an Iconia 10 "and I like the EZ Wakup function, but when I wake the tablet with 5 fingers he always goes to reactivation of the EZ settings screen - I would like to go directly to the home screen once I wake the Tablet, how can I do this? Thank you.

  Please check in the app defaults to the option to disable to open when the rest of the shelf upward.

  http://Acer.custhelp.com/app/answers/detail/A_ID/11345#_ga=1.219386010.263337500.1415824428

  http://Acer.custhelp.com/app/answers/detail/A_ID/8615/related/1