Read files based on date selection

Similar Questions

• When you save a file to the [.jpg] format, I wonder to choose a quality from 1 to 100. What are the changes in the created file based on the selected quality setting?

  When you save a file to the [.jpg] format, I wonder to choose a quality from 1 to 100. What are the changes in the created file based on the selected quality setting? I would like to know what changes, so in the future, I can set my camera to one who will give me the highest quality in a first time, which allows me to make cultures and always preserve the quality.

  Thank you

  Dovid

  Thank you twenty-one... your answer of common sense to me.

  so, in short, can I assume down the chosen quality over compression algorithm?

• Reading JSON file based on the selected drop-down list item

  I have little code shown below.

  I'm trying to read data from a JSON file based on certain criteria, in this case all the suburbs on a territory
  

  I can do that quite easily in a liquid hard coding the territory, however, I want to use the value of the < select > option

  I understand that this can be achieved with JavaScript, is it possible otherwise?

  < select id = 'territory' >

  < option value = "xx" >--please select--< / option >

  < option value = "CBD" > CBD < / option >

  < option value = "North" > North < / option >

  < option value = "South" > South < / option >

  < / select >

  {model module_json json="/_System/shipping/shipping.json" = "" = "shipping" collection "}

  < select id = "suburbs" >

  < option value = "xx" >--please select--< / option >

  {% for section in shipping.territory %}

  {% If the element.} TERRITORY is '< value on top of select >' %}

  < option value = "{{point." POSTAL CODE}} "> {{point." SUBURBS}} < / option >

  {% endif %}

  {% endfor %}

  < / select >

  Hi Craig,.

  You can skip liquid altogether and use JS to get the values you need for json.

  If you want to use liquid you need to load the last part with AJAX/XHR to enter the selected value.

  1. create a new file suburb.html and ajax request after #territory selected with the option as a parameter:

  URL: suburb.html? = north shipping

  2. the suburb.html file would be:

  {assign = globals.get.shipping-% selectedTerritory %}<- this="" will="" have="">

  {model module_json json="/_System/shipping/shipping.json" = "" = "shipping" collection "}

  --Please select--

  {% for section in shipping.territory %}

  {% If the element.} TERRITORY is selectedTerritory %}

  {{point. SUBURBS}}

  {% endif %}

  {% endfor %}

• Reading files of multiple data individually

  Hello

  I made a program that writes data into several files .lvm spectrometer.

  They are saved in the same folder with sequential names like 'file_001.lvm', 'file_002.lvm', 'file_003.lvm', 'file_004.lvm '...

  I use the "List Folder.vi" to list them all and want to read them individually and select them while the program is still ongoing. I expected that I could use a control (such as a slide) on the Panel for front do it affecting 1 read "file_001.lvm" and it 10 to read "file_010.lvm" and so on.

  Is it possible to do? I need a light on how to do it.

  This control must change the name of the file to read "reading measurement file Express", but I don't know how to do it again.

  I thought that the name has a 'base' i.e. "file_" and I only needed to change the rest so I can choose between the files. Am I wrong?

  Thanks in advance,

  Liepo

  PS: I send you my program as it is and a folder with the files. It reads the files sequentially, and then stops. I want to be able to control what file it reads instead of this automatic iteration.

  You probably want to do something like this:

  

• Read file, reformat the data, write new file

  Oracle 11g PL/SQL.

  I have a need to read an existing file, reformat the drive and write to a new file format.

  My solution has been to read the file using utl_file and store it in an array of procedure1.  There is a column of data to hold 1000 bytes of data for each line of the file.

  Then in procedure2, read the data through a cursor column, with a certain logic and fill in the fields of a record type object by using the function substr on the data column.  The type of record object has about 80 columns, all TANK types.  The OUT of procedure2 parameter would be the type of record object.

  Then in procedure3, record object would be the parameter, and this recording would be used to write the new line of the file.  The problem I see now is that I can't convert the object record type a TANK in order to write the file.  So that would mean that I have to reference each of the 80 columns once again in procedure 3 and concatenate each for the parameter buffer utl_file.put_file.

  I don't want to assign values for columns of 80 exit more than once because that makes the code very long and detailed, so I thought that I assign values to the time in the record object, then pass the record object to the write file procedure.

  I'm looking for suggestions on a better design, or have I missed some very basic code design?

  Thank you.

  Thanks for all the great suggestions.

  The original file is from a COBOL program.  What I ended up doing was reference and readability, I have defined/filled all fields of provision of COBOL in my program and then concatenated fields during the construction of the output string.  It's a bit verbose, since the 80s fields appear twice, but the code is clear and easy to understand for support purposes.

  Thanks again for all the thoughtful suggestions.

• View the name of the CSV file based on date?

  So I have this CSV file where there are two columns Date and name. And I want to show the correct name on the correct date in the field of the name_txt, how can I do this? pls help.

  Use the urlloader class to load your csv file and string flash methods to analyze the data.

• Problem with reading file xls with text inside

  Hi all

  I have a problem to read the excel (xls) file with the first line containing chains of different length.

  I wonder how can I skip the first line and continue reading of the second line.

  Thank you very much.

  I only have saved VI.

  So here are the names.

  Downstairs: open the file.  Text reading file with lines of selected reading (right click for the menu to find).  Read the text file with lines of reading not selected.  Close the file.  At the top is spreadsheet String to Array.

• Why not make a text box read only based on drop-down of work?

  Hello experts.

  I received help on this a few hours ago, and it has worked very well so I closed the discussion and form.  However, now it no longer works and I don't know what I did.

  I have a form with a dropdown list and two text boxes.  The first text box is populated according to the value selected in the drop-down list, I used a simple table of the to do and it works as expected.  I had to bring textbox2 read only based on some selections in the drop-down field.  It worked very well at the beginning, but now it no longer works.  I did not any changes to the form except that I closed and since.

  I try to get the following to work:

  If (this.rawValue is "Junk" again)

  {textbox2.access = "readOnly" ;}

  If (this.rawValue is "More Junk")

  {textbox2.access = "readOnly" ;}

  I put this in the change event using javascript.  I use ARE 8.2 on Windows Vista 32 bit.

  Any help would be greatly appreciated.

  Thank you

  Jerald

  In the case of change you can't get the rawValue... So, use xfa.event.newText to get the modified text...

  Also, you have a space at the end of the value while comparing. In the code below I removed it.

  If (xfa.event.newText is "Junk Again")

  {textbox2.access = "readOnly" ;}

  If (xfa.event.newText == more "junk")

  {textbox2.access = "readOnly" ;}

  Thank you

  Srini

• 'IMPOSSIBLE READ of THE DISC or FILE SOURCE' - trying to select the last WORD Excel documents to copy into the folder for backup.

  I'm trying to manage files.  My strategy was looking for files with specific dates, then to copy to a new folder with the time interest af and backup.

  1. in the folder my documents C: SEARCH > SELECT ALL

  2 > COPY INTO FOLDER

  3 > MAKE NEW FOLDER

  Can I get an impasse with can NOT READ FILE or DISK SOURCE

  Is there a better way to make a new record with docs for a given period of time?

  I don't know if it is 'better', but another way would be to use Robocopy.

  Robocopy: <> http://technet.microsoft.com/en-us/library/cc733145%28WS.10%29.aspx >

  If you don't have robocopy on your machine, you can get it for free as part of theXP Resource Kit

  An example of command for your application can be:
  Robocopy "c:\documents and Settings\nom" outputdirectory / mining: 30 /maxage:60 / s

  HTH,
  JW

• Reading file Modification date

  In Flash 8, I know there is the FileReference class but it seems to be based around downloading files. Is there a way to read a date of modification of the existing local files only? I have build an executable that loads a .swf file and the .exe has just need to know if the file has been updated. It checks periodically change, ideally. Any help would be appreciated with this. Thank you, Rob

  Another thought... his was curious why you need this information...

  I can only assume that its because some external process to the projector exe file creates a new SWF every now and then... one with the same name as the one you have loaded.

  If so, could you not get this process (whatever that is) to also save a text file with the date and time at the time of the update the swf file?
  Flash load this value from the text file when it starts with loadVars and (if you want more persistence a sharedObject allows you to retrieve/store the old value).
  Regularly - check the text file and then compare with the old value each time. I know that this approach seems clumsy, but you are quite limited, unless you want to add some additional file systems api via a 3rd party etc. projector tool. Its also difficult to propose an option because I don't know why you need to do this... I'm just guessing.

• Reading several files / locate the data source during execution

  Hi all
  
  I have a requirement of the company in which I need to read files to different folders. This system is not hosting the ODI agent. There are two folders, the folder A and folder b. Two records may have any number of files. My intention is to read the files in a folder and write the data to a table in a database that resides in another system. This forms a flow for me. For the B folder, I have a similar flow. All files (in the folder A and folder B) have the same structure. The requirement is to read A book during the week and the B folder on the weekend. The system that has the database also runs the ODI agent.
  
  Here are my questions:
  
  1. How can I read several files one by one in a folder? Because the read files must be archived, they need to be written in a different folder, file C (for example). How do you archive part? Please note that this machine does not run ODI agent (network share could be an option, but we try to avoid it.
  
  2. can I have only an interface to read files in folder A and folder B? Everything else remains the same (the processing logic/transformations etc.). Indeed, is there a way to dynamically switch between two files (using a variable, perhaps).
  
  I've not worked with files and so any help is greatly appreciated.
  
  Edited by: Sankash 7 May 2009 08:24

  Hi Sankash,

  Hopefully I can help you achieve this task.

  Please go through this link

  Re: import files in a table

  1. you can update the status of the process of the files in a journal/temp table.
  Based on the State of the (transformed) file in the table, you can check the files that has completed its process correctly.

  machine does not run ODI agent:-J' have it is implemented the same type of scenario, in which I am downlading all the files in a common location and treat it from there.

  2. one of the solutions is that: -.

  create two interface with the same structure, but the source table must point to the folder A and B
  Create a variable (week/check) and based on the value, you can call the interfaces.

  second option: -.

  If you're downlaoding the files in a common location, you can reach the spot through a single interface (down load files from folder A or B according to in week/weelend)

  3. If all the files have the same structure, you need only a data store and it should be a variable data store.

  If something is not not clear please me ping / mail to my id (good that now I don't get enough time to go through the forum discussions)

  Also if you need I can send you a diagram wokflow for this loop (read multiple files one by one in a folder)

  Kind regards
  Pascale of M

• Cannot open the terminal failures of the file 'C\:HP\DATA\HP. DAT' to read.

  I've just updated my bios on my HP Pavilion g6-2102au Notebook PC.

  I had continuous multi color screens, thought it was overheating but not so much.

  I installed the latest version of the bios and it seems to have worked? having had a twinkle while writing

  This.

  My query is to start up when he started I get this message and I said OK

  Terminal Failute cannot open the file 'C\:HP\DATA\HPLB. DAT' to read.

  This is the message that someone help me get rid of it

  See you soon

  shiner2348

  Hi @shiner2348,

  Thank you for your inquiry.

  I understand that you receive the error message "Terminal failure cannot open the file"C\:HP\DATA\HPLB. " DAT' to read '.

  This is a reference to the launch of HP software box.    I suggest to uninstall and then restart your laptop.

  If you want to keep this app I suggest that you try to download it and install it using compatibility mode.

  Here are links to help you in this process:

  Compatibility mode

  HP launch box Windows 8

  Please let me know the results.

  
  

  Thank you for your participation in the Forums of HP! We want to help you as well as others who may encounter a similar problem as you. Please consider tagging the post in order to solve your problem as "accept as Solution" to help other members of the community!

  To show recognition for my efforts please click the Thumbs Up below.

• Adobe *.pdf files can be opened in Internet Explorer, the default program can not be changed to acrobat reader in the properties or select 'Open with'

  Adobe *.pdf files can be opened in Internet Explorer, the default program can not be changed to acrobat reader in the properties or select 'Open with'. Cannot change the default program of Adobe in the file association list.

  I have the latest version of Adobe (9.3.3).

  Hello

  Don't forget to log on as an ADMINISTRATOR

  Use this utility to unassociate the. PDF and then re - associate with Adobe Acrobat Reader.

  How Unassociate a Type of Extension file in Vista and a utility to help
  http://www.Vistax64.com/tutorials/91920-unassociate-file-extention-type.html

  How to set default Associations for a program under Vista
  http://www.Vistax64.com/tutorials/83196-default-programs-program-default-associations.html

  How to associate a file Extension with a program Type in Vistahttp://www.vistax64.com/tutorials/69758-default-programs.html

  How to view and change an Extension of filename on Vista
  http://www.Vistax64.com/tutorials/103171-file-name-extension.html

  Restore the Type Associations by default Vista file extensions
  http://www.Vistax64.com/tutorials/233243-default-file-type-associations-restore.html
  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Reading file and dump the data into the database using BPEL process

  I have to read the CSV file and insert data into the database... To do this, I created some asynchronous bpel process. Adapter filed added and associated with the receive activity... Adapter DB has added and associated with the Invoke activity. Receive two total activity are available in the process when trying to Test em, receive only the first activity is complete and awaits the second receive activity. Please suggest how to proceed with...

  Thanks, Maury.

  Hi Maury,

  There is no need in step 2 that u mentioned above. I donot find useless a webservice?

  The process will be launched by the CSV file, then using the processing activity, you can put it in the DB.

  There should be no way where you can manually test it by giving an entry. All you can do to test is to put the file in the folder you mentioned when configuring the file adapter.

  You just need to have the composite as below:

  ReadCSVFile---> BPEL--> DB adapter

  And in your BPEL process:

  Recieve--> Transformation activity--> call activity

  Try to work on some samples listed on the oracle site and go through the below URL:

  The playback of the file adapter feature using

  Thank you

  Deepak.

• Vary the accounts based on the selection of feature in data form

  Hi all
  
  I use Hyperion Planning 11.1.1.0.
  
  I have a problem by varying the members accounts on the dataform based on the selection of members of the entity of the dimension of the page.
  
  Currently, we use the Begbalance as a member (column) in the dataform and kept hidden. And we set the value of Begbalance-> actual values to zero for accounts that correspond to a specific entity...
  
  Then, on the form, I put 'delete missing data... That way I can show the accounts that should appear for an entity.
  
  But the list of members of the entity has more than 200, and thus also the accounts.
  
  Therefore, it is very tedious to do this adjustment for them...
  
  Someone please you suggest a better way to achieve the same * (i.e. different accounts on the dataform based on a selection of entity?) *.
  
  Kind regards.
  
  Alicia

  Hello

  You use the technique that a lot of consultants allows you to control what is displayed on a form.
  How do you set the values, if you have an excel template that you just update and then send the data to essbase it can facilitate the management of it a little.

  See you soon

  John
  http://John-Goodwin.blogspot.com/