Read multiple files in the folder and add data to a file

Similar Questions

• Open the spreadsheet at the request and add data

  Using a cDAQ 9172 and Labview 8.2, I collect four channels of noisy pressure and temperature data collected during a product test.  The data are shown live on the band on the front panel cards after be smoothed by the average feature of the sample Compression Express vi.  All this works pretty well.

  Data are presented to the test operator so that he can see when the test conditions have stabilized, which usually takes 3 to 5 minutes.  After stabilization, I want to be able to press a button on the front panel so that a spreadsheet is open (ideally, with the original opening time as part of the file name) and a scan of the four data channels are added to the spreadsheet (with a timestamp).  Then, ongoing test for 1 or 2 minutes, I want to again push the button every 10 or 15 seconds or so to add more data analysis, so that we can see later that the conditions had really stabilized.  The exact date and the number of analyses of additional data is not critical, I just want to be able to connect to another 4 to 8 lines of data before you complete the test.

  I have a kind of sort of do this, shown on the seal 'on demand spreadsheet.vi' below.  Noisy signals are shown here numbers just under the random name embedded in a table (which is how my data writing to a spreadsheet file in my actual program).  The problem with this arrangement is that the spreadsheet file is created each time that I start the vi and there are several times during execution of tests and data are not collected for some reason any.  Accordingly, we would end up with a large number of files with no or data without meaning .xls.  I just want to create the worksheet file when I press the button (s) during a successful test after conditions have stabilized.

  

  I tried a slightly different approach in the joint 'on demand spreadsheet 2.vi' below where I added a switch to toggle to activate a case to open the spreadsheet, and an additional button to save data.  It seems like it should work, but I don't get all the lines of data, only the headers.

  

  I'm still pretty new to all this and I have spent days trying to figure this out.  Any help is greatly appreciated.

  I don't have 8.2.  You can either save my vi and publish it on the thread Downconvert VI ask, or you could look at just the image:

  

• Is it possible to print from Windows Explorer the folder and files from one hard disk structure?

  You want to compare the folder and organization of the files of two disks.  With the help of a visual comparison takes time.  Also want to print the subfolders and files in a folder for the purposes of comparison.

  Hello

  Welcome to Microsoft Windows Vista Forums.

  You can try this:

  Create the Printdir.bat file

  To do this, follow these steps:

  1. click on start and run, type notepad, and then click OK.

  2. Paste the following text in Notepad:

  off @echo

  dir %1/-p o:gn > "% temp%\Listing".

  Start Notepad /w /p "% temp%\Listing".

  del "% temp%\Listing".

  output

  3. on the file menu, click on exit and then click Yes to save the changes.

  4. in the Save dialog box under, type the following text, and then click Save:

  %windir%\Printdir.bat

  Click on the link how to add the feature print directory for folders in Windows XP and Windows Vista: http://support.microsoft.com/kb/321379

  Diana

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Problem with rename folders in Windows 7: get this error message: "the action cannot be completed because the folder or file is open in another program. Close the folder and try again. »

  When I try to rename a folder in Windows 7 I get this error message: "the action cannot be completed because the folder or file is open in another program. Close the folder and try again. "Can anyone help?

  I gave up and solved the problem by buying a third party software to use as a directory, Directory Opus.  It is much more functional than the Microsoft Directory and I have never problem renaming of files.  I am just amazed that so many people have this problem and Microsoft has not fixed.

• I have a folder with 140 tif files I want to convert to PDF. Is it possible to select the folder and convert all files or what I need to do each file individually?

  I have a folder containing tiff 140 files I want to convert to PDF. Is it possible to select the folder and convert all files or do I have to convert each individually?

  Hi MBASparky,

  It is possible to convert all the TIFF files to PDF in a go with Actions in Acrobat Pro ms.

  You can also perform this service Pack PDF help.

  Go to https://cloud.acrobat.com/convertpdf

  Sign in with your credentials

  Click on select files to convert to PDF

  Click on choose the files on my computer

  Of the open a file dialog box, navigate to the folder where you have all the TIFF files and use CTRL + A to select all files.

  I would like to know if it works.

  Thank you

  Abhishek

• How can I create a new folder and add some choose another folder

  How can I create a new folder and add some pictures a different folder?

  Click Start-> computer.  Navigate to where you want to create the new folder.  Then, hold down the ALT key and press F.  Point again-> file and click folder.  Now, you have created the folder if you need to name it.  Type the name you want to give the file and press ENTER.  Now you have the new folder with the name you gave it.  Use him copy / paste to copy the images to the new folder.

  Good luck.

• Script to check how the host in the domain and add it to domain

  Hi all

  AM face to face strange question as some or little my esxi host is out and it will be difficult to connect and run to another regular activity.

  Is there a script that can check together how esxi host are out of area and another script that can add back to the domain.

  Thank you in advance for a ton

  Hello.

  This little script will check all your hosts domain name, if none it will put the hostname to out.txt file to the current folder:

  $hostnet = Get-VMHost |Get-VMHostNetwork
     $hostnet |foreach{
     if (!$_.DomainName)
      {
      $_.HostName|out-file .\out.txt
      }
  
     }
  

  Second scenario takes the output generated by the first and adds the domain name of your choice to the host. It will ask you confirmation.

  $nodomainhost = Get-Content .\out.txt
  $domain = "your.domain"
  $nodomainhost|foreach {
  Set-VMHostNetwork -HostName $_ -DomainName "$domain" -Confirm:$true
  }
  

• Questions asked by a beginning.  CF, HTML, change of name/path of the folder and the addition of home page.

  
  Questions asked by a beginning. CF, HTML, change of name/path of the folder and the addition of home page.
  Hello, I got this new job and I'm trying to understand it as soon as possible. I'm a complete newbie to html, CF and web development
  Yes, I caught a few books, but if you can help me. I appreciate a lot is.
  
  I have this file structure
  Z:\ToExport\RepDocs\MyReport
  Pointing to this one
  http://myserver/MyReport/
  You will find a folder of MyReport
  And find 2 .cfm
  1 index
  2 version.cfm
  I have 2 BIG questions, ok 3
  
  HOW TO MAKE A PAGE THAT WILL CONTAIN
  The link of this MyReport.
  A home page. In other words.
  
  Homepage that contains a main report text
  Name of the division_
  
  Then a link called my reports. And your report
  Prefereably sorting
  
  · My reports.
  · Your report
  
  
  HOW CAN I CHANGE THE FOLDER
  Of
  Z:\ToExport\RepDocs\MyReport
  Pointing to this one
  http://myserver/MyReport/
  TO
  Z:\NewExport\repmining\myreport
  
  And then tap on it
  http://myserver/ repmining\myreport
  
  
  WHY IS THE REPDOCS NOT TYPED IN THE BROWSER WHEN YOU VIEW the MYREPORT. (I don't have to type (repdocs) to view the report)?
  in other words:
  Z:\ToExport\RepDocs\MyReport
  Is typed
  http://myserver/MyReport/
  
  without repdocs.
  
  Please excuse me.
  I am a true beginner.
  
  Thank you.
  Hope someone replies soon.
  Take care.
  
  

  OK, I think I understand your questions, so here:

  Quote:
  HOW TO MAKE A PAGE THAT WILL CONTAIN
  The link of this MyReport.

  Just have a link on a page, e.g.:
  TEXT of the LINK,
  As for your question on your reports, I don't understand what you're asking

  Quote:
  HOW CAN I CHANGE THE FOLDER
  Of
  Z:\ToExport\RepDocs\MyReport
  Pointing to this one
  http://myserver/MyReport/
  TO
  Z:\NewExport\repmining\myreport

  And then tap on it
  http://myserver/ repmining\myreport

  If you are directly connected to the server, simply create a folder (what looks like) Z:\ToExport\RepDocs\ which is the new name of Fortin, ex:
  Z:\ToExport\RepDocs\NEW_folder and put the files into it. If you are now directly connected to the server, use a program such as FTP server to connect via FTP and do the same thing.

  Quote:
  WHY IS THE REPDOCS NOT TYPED IN THE BROWSER WHEN YOU VIEW the MYREPORT. (I don't have to type (repdocs) to view the report)?
  in other words:
  Z:\ToExport\RepDocs\MyReport
  Is typed
  http://myserver/MyReport/

  It is simply because http://myserver/Myreport/ is set to point to the Z:\ToExport\RepDocs\MyReport file so it looks http://myserver is set on the Z:\ToExport\RepDocs\ folder anything you add to a folder which will be included.

  I have IE hop answered some of your questions

• Creating the folder and by assigning the role access list, approach programmatic

  Hi all

  I have a requirement to create the folder and assigning RAL in the folder created by the UCM (11.1.1.8) program

  I found RIDC API to use for creating folders, can I use the same for the assignment of RAL, pointers?

  Thank you

  You get errors?

  This blog can be useful: adding a file in folders of the WebCenter RIDC content frame. Niels Krijger

  Jonathan

  http://jonathanhult.com

• Target the scene and add < iframe > go inside symbol?

  Having trouble again. I'm SLOWLY the CC thing use 2014 =).

  Now, I need to be able to target a symbol on the stage of inside of an element inside a symbol and add it with an < iframe > and move the iframe attributes.

  I have a file - please see the stock symbol and whitewater1.click and whiteawater2.click videoui in this symbol (link below (drop box)

  Here's what I have so far...

  Insert the code for the mouse, click here

  Go on a label or a specific time and stop. For example:

  SYM. Stop (500); or sym.stop ("myLabel");

  SYM. Stop ("videotwo");

  Change the text in an element

  SYM. $("télétexte") .html ("video to: TheNigglesbear");

  var youtubevidtwo = $("< iframe/>");

  sym.getComposition () .getStage ().getSymbol("vcontainer").append (youtubevidtwo);

  youtubevidtwo.attr('type','text/html');

  youtubevidtwo.attr('width','616');

  youtubevidtwo.attr('height','347');

  youtubevidtwo.attr ('src','http://www.youtube.com/embed/eqzwoIQseyA?rel=0'); / / url/Video_Id

  youtubevidtwo.attr('frameborder','0');       // 1 | 0

  youtubevidtwo.attr('allowfullscreen','0');   // 1 | 0

  This same code - with different path for symbol of course-works fine on the document.compositionReadyscene, but don't know how to target the videoui and add the iframe and its attributes from inside another symbol.

  Help please - it should really be more ADVANCED examples of possible targeting methods. I find a lot on the targeting of the symbols inside symbols, or stage of symbols, but not much about the symbols on stage for another symbol on the stage.

  Thanks in advance.

  Dropbox - videoPhotoUI.zip

  Note that vcontainer is not a symbol instance, so in whitewater2 click Manager you need to change the code at line number 11 of:

  $.getComposition () .getStage () .getSymbol ("vcontainer")

  for the following:

  sym.getComposition () .getStage (). $("vcontainer")

  It will Add an iframe that is new to the container, however, if you need to replace the old with the new video, you can try the following:

  container var = sym.getComposition () .getStage (). $("vcontainer");

  Container.Find ("iframe"). Remove();

  Container.Append (youtubevidtwo);

  I hope this helps.

  DIA-

• IPod touch reads "ipod disabled" on the screen and does nothing and will not be a link with itunes.

  IPod touch

  IPod touch reads "ipod disabled" on the screen and don't respond to nothing and used to link with itunes, we think that our daughter has forgotten his password and entered the wrong one until this message has appeared, is there any solution for this?

  Hello Jesushq33

  The forum in that you send is for Microsoft Windows. For support with Apple and Apple products please click on the link below. Thank you.
  http://www.Apple.com/support/iPodTouch/

• In Windows Explorer. A dated file say 12/02/2000. When you click the folder, the files in the folder bear different date. Why is it so.

  ORIGINAL TITLE: I use Windows xp.

  I use Windows xp. In Windows Explorer. A dated file say 12/02/2000. When you click the folder, the files in the folder bear different date. Why is it so. To update the files, we should see the dates of the files instead of the dates of the folder. right? Why is there such a difference?

  My copy of Windows XP works the same as yours.  Apparently the date folder is not updated when the content is, that fact make some sense as the folder itself is not updated when new content is created in the it.

• How to print the name of the folder and its subfolder names

  I have a folder with miltiple sbu-records.  I need to print the name of the folder and related subfolders.  How can I do this?

  If you need it in a tree hierarchy, use this command:

  1 hold down the SHIFT key and right-click on the folder.
  2. click on command window open here.
  3. type the following command:
  TREE | Clip
  4. open your word processor, and then press CTRL + V
  This glue entries to the directory tree.

• What is the difference between the cat of the IR and IR data files in lightroom it please

  I have cat IR and IR data files in my backup. These two are big files of 500 MB, 900 MB respectively. My understanding is that these records did not contain real images but only thumbnails with the mods of lightroom. What is the difference between the cat of the IR and IR data files and should I make a second copy of both or the cat IR file

  The.lrcat is the file in your catalog. This is an important safeguard.

  The .lrdata files have previews. These can always be regenerated from the library, but it could take some time a large catalog.

  It is advisable to save them both. But if you are short on disk space, save the .lrcat file.

• When I try to sign and add dates in pdf forms, as I USED to be able to do...

  When I try to sign and add dates in pdf forms, as I USED to be able to do until I'm so-called 'improved', by selecting "fill and sign", the page will just blank and I'm drunk. What's wrong?

  Windows 7 Pro.

  Screenshot simply shows nothing else that a header with a tab said "Document" that would bring back me to the pdf document. All the pdf documents I've tried, and that was the most I've saved.

  Unfortunately, it came to my attention when I had little time and was both deal with the Australian Taxation office AND fill in the dates and sign and return that some docs of annual audit my accountants.

  Solved the problem simply uninstall the DC version and stalking a version of X Adobe Reader online and installation. Hey presto, everything fixed. As usual the lesson learned is: if it's not broken, don't fix it "." It happened because I agreed a recommended update. Like so many others, Adobe seems to have problems with the "newer".

  I now put on ' manually search for updates (so-called non recommended) and that's the way it will stay, and I do not seek. Also, if I try in the future, I keep the Setup program in a folder in my downloads, so I can come back easily, where an agency decides to remove older versions of availability.