/ read-only data

Similar Questions

• Read only data with replication SAN HP store? (CA)

  Hello

  Not sure it should be in the ESX or VC forum...    We use EVA and replication on XP SAN with SAN CA (Continuous Access). We have virtual machines on a LUN (read, write) replicated to a destination LUN Dr. When you use HP CA it marks the destination LUN read-only source...

  We want to import the LUN target in our cluster of DR esx, but when we add the disk it formats... We have tried to deceive esx by adding the data reading writing that works then set up this store again which marks while reading then however only store data disappears from the host to storage page...

  Anyone know if this will work or how to make it work?  Maybe a setting advanced on the part of the drive to ESX import read only LUNS which we will turn to read write if we talk about DR

  Any ideas would be thank you very much

  Packetboy.

  On the second site ESXs, enter into the advanced settings and go to LVM > DissalowSnapshotLun and set it to 0. Perform a new analysis and data warehouses SHOULD appear available. You can go back to la to write.

  Only, I did not understand why the added ESX your LUN as data stores format again. This behavior should not happen. Maybe something is not replicated.

  Do not forget that, by adding a virtual computer, you will need to keep/change the uuid as the data store has changed unit logic (indeed) number.

  Marcelo Soares

  VMWare Certified Professional 310

  Technical Support Engineer

  Chief Executive Officer of the Linux server

• RMAN & read-only data files

  DB: 10.2.0.4 (just upgraded from 8i)
  Win 2008 64-bit operating system
  
  This is the first backup of the 10g database after the upgrade & with RMAN.
  I copied all the backup files to another server to test and try to create a new database.
  
  The backup script was: -.
  run
  {
  backup as compressed backupset database more archivelog delete all entries;
  }
  
  When I run the BACKUP from the LIST, I can see the data files read-only listed with the rest of the files.
  
  On the second test server, I mounted the database & run a restore command.
  run
  {
  allocate channel d1 type disk;
  restore the database;
  }
  
  He restored all the files except those unalterable. So now, I get an error "alter database open resetlogs ' may fail because the RO data files are missing.
  
  I tried to do the restore using RESTORE DATABASE CHECK READONLY, but now I get an error saying: -.
  
  RMAN-00571: ===========================================================
  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
  RMAN-00571: ===========================================================
  RMAN-03002: failure of the restore command at 2010-05-21 14:56:30
  RMAN-06026: some targets not found - abandonment of restoration
  RMAN-06023: no backup or copy of datafile 8 found to restore
  RMAN-06023: no backup or copy of 7 found to restore
  
  But the BACKUP from the LIST is displayed data readonly files in the list.
  
  How to make this work?

  If you have physical copies of the datafiles made after the Tablespace has been read-only restoring them (using the operating system utilities).

  Hemant K Collette

• Read-only data objects

  What is the best way to ensure that the data in the cache is not changed once it is placed in the cache? Is there a way to specify that objects are 'read only '?
  
  My cache clients must have the ability to read and write to and from the cache, but should not be able to change (or replace) the existing entries. They should just be able to read existing entries or add new unique entries.
  
  Thank you!

  Hello

  You should be able to extend WrapperNamedCacheto get the desired behavior.

  A close example of what you want to do is ReadonlyNamedCache

  Thank you
  -Dave

  Edited by: dcarrano on December 1st, 2009 16:05

• Tabular read only Date Picker

  Hello
  I have two or three items with dates selectors and do not want to implement
  This code because it will be too many buttons on my form. I need to delete an element
  at a time when the date picker is read-only, but in tabular form.

  function f_clear_items()
  { 
      {$x('P1_ITEMA').value = ''};
      {$x('P1_ITEMB').value = ''};
      }

  Then after that I created a button url and pass this function I can erase the datepicker. But, I
  has been wondering is there a cleaner way to do this.
  
  I have other items on the page that are the same name but in different tables. I only want
  to clear each item date picker at the same time. This code works very well for a regular shape.
  -Item after item to erase text element

  a href="javascript:setValue('P1_ITEMA','');">Clear Date</a

  There is a named thread "how to delete a page only reading point...?" that shows how this code works, but does not work
  work for a table shape in a page master detail. There is a link on the side of the switch of dates to delete the item specified, but in a tabular form point, there is no tab of the item, any ideas on how to clear a date picker component readonly by using a tabular form
  and not with a button for each item, thanks in advance. I use the Application Express 3.2.0.00.27.

  Charles,

  I did a little more for you...

  Kind regards
  Dan

  http://danielmcghan.us
  http://sourceforge.NET/projects/tapigen
  http://sourceforge.NET/projects/plrecur

  You can reward this answer by marking as being useful or correct ;-)

• How to activate a field read-only for data entry.

  Dear all,

  In fact, I'm bring a form simply queries the table of database data and shows it. It presents the data in readonly textfields.

  There is a button that can create a new line. The problem is when the system is to create the line he is creating the messagefield readoly.

  In order to overcome the situation that I wrote the code below

  mainVO.last () .setAttribute ("IsTextReadable", Boolean.TRUE); To make the last row entrable for the user.

  But the system gives the error when the user is pressing the button create

  Details of the exception.

  oracle.apps.fnd.framework.OAException: oracle.jbo.NoDefException: Houston-25058:

  IsTextReadable of the type definition of that attribute is not found in XxphccamsfdbmstdtlrVO1

  Could you please suggest me how to make the textfield readonly can be changed dynamically.

  Concerning

  Rajat

  Dear Stephanie,

  Thanks for your reply. I solved the problem and it was pretty simple.

  I created a transient in the VO and attached attribute the transitional attribute to the property read-only from the field using SPEL (${oa.) XxamsfdbdtlrVO1.Viewenb}).

  Select the line that you want to update and run it.

  row.setAttribute ("Viewenb", Boolean.TRUE);

  Concerning

  Rajat

• Set the following fields in 'read only' to take data from the first occurrence?

  Hoping that this can be easily done without the need for scripting.

  I'm working on creating a form of proposal. There are a few areas where I would like the first instance of an editable field, but the rest would be locked so that they are even taken out of the tab order.

  Example: On the first page, I have a field for the name of the company. This field is reproduced in the pages of the proposal. Each field has the same name. So all data have concluded one of them are dealt to each of them.

  Ideal solution: Front page field is editable, and is where data is entered. "All the following fields are defined as 'read only' and take their 'master' field data" so someone can't make a change to this form, for example, the third page and have this error repeated throughout the document.

  Is this possible?

  I use Acrobat Pro DC on Windows 7 pro.

  Thank you.

  You use a script to do it, but it's very simple.

  If the 'master' field is called "Text1", then enter this code in the calculation script customized for all other areas that need to have its value:

  Event.Value = this.getField("Text1").value;

• Reader only a physical standby Clock Data Guard?

  Hi all

  We try to use TimesTen 11.2.2.4.1 as a memory cache read-only for a 11.2.3.0.7 on Linus RedHat 6.3 Oracle schema, all using Oracle Data Guard to replicate the Oracle instance through geographically remote sites. At each site, we would like to have two instances of TT, synchronization with the local instance of Oracle 11 g. It works very well against the master DB, but TT agents will be able to synchronize against physical standby instances?

  The problem, seems, is that the agent of TT uses structures dedicated in the master Oracle (related to the grid of cache), instance that will be replicated to instances of Eve. Is TT agent able to use the read-only, structures to complete replication synchronization, or is this unworkable approach? What would be your advisor as a way to do this?

  Thanks for your help,

  Chris

  No, I'm afraid that will not work and is not supported. We support the use of groups of READONLY and AWT cache in collaboration with Data Guard in the following configuration (documented in the Guide of Cache TimesTen IMDB):

  1 data Guard is configured as synchronous physical standby

  2. all the caches of TT run against Oracle DB

  3. in the event of a failover of Data Guard, TT hiding can be migrated to run against the DB who now has beed promoted active to standby

  It is the only supported configuration.

  Kind regards

  Chris

• I have a VBA application that fills the data in an Acrobat form.  Do I have to distribute a complete Acrobat on each machine that uses this application (it will be disastrous) or is there a way I can use the software Acrobat reader only.  I am using the f

  I have a VBA application that fills the data in an Acrobat form.  Do I have to distribute a complete Acrobat on each machine that uses this application (it will be disastrous) or is there a way I can use the software Acrobat reader only.  I use the next AcroExch.App and AcroExch.PDDoc object to the form.  I hope there's a distribution object, I can use the full application and not because I don't want users to have access to forms and to keep the cost down.

  It is important to realize that the Acrobat SDK kit is a marketing tool for Acrobat. So, Yes, certainly you need a copy for each system. There is no redistributable components.

• SQL DEVELOPER DATA MODELER tables seem to be read-only and make it a symbol of the string in the upper left corner

  I have a lot of tables in my data model.  I have three relational models defined in this file.  In one of the models, all tables seem to be read-only.  They all have a string in the upper left corner of the box.

  I use version control, so that are not archived or something like that.

  How to unlock these items?  Why they seem to be locked?

  Thank you

  Must not have been involuntary - you should have physically moved and dropped the tables/entities from one model to the other.

  If you want to copy them and be able to change in the future, use instead of copy / paste.

• read only cells in the form of data

  Hello

  A couple of lines become read only in one or more the data form, it is read only for some users AB and its writable for users CD.

  AB users could not enter data until last month in the same lines on the same form, all of a sudden it does not AB enter data in cells.

  If security seems good, what could be other possible questions?

  Thank you

  Ravi

  Did you look at their security? Check the filters in environmental assessments or generate a report of access control for users and see if some security is limiting.

  Concerning

  Celvin

• The selected data source is read-only

  Someone knows how to solve this 'problem '.

  The selected data source is read-only. You cannot change the view configuration.

  Thanks in advance.

  My solution to this has been reset in the field of data and download information again. I know that it is not best practice but it works

• Strange question: Hyperion Planning Forms becomes read-only and data are destroyed: 11.1.2.2

  Hello

  Let me start by saying that I am not new to Hyperion Planning. We encounter a weird problem in our Test System. We notice that some (NOT ALL) of our tour of webforms in readonly webforms. all the cells in the gray form. It comes to despite the fact that the read-only checkbox is not checked in the form as well as the security is fine on all dimensions; Basically, all the cells of the form are valid combinations.

  The form becomes readonly, and all the data on this form is always Wiped. This has happened only for two web forms so far. We took a lot of Calc (none of the Calc have cleardata command). We do not know why this is happening. Maybe it's a bug in the product... not sure. has anyone seen this behavior before?

  Please let me know.

  -

  PK

  Please skip this question. It happened because someone on my team had added a member under umbrella of level 0.

• DBMS - data not visible for read only account users.

  I created below to know the status of my lots which run on server every Sunday.
  
  CREATE OR REPLACE VIEW CAFDB_REFRESH AS
  SELECT
  log_id,
  owner,
  TO_CHAR (log_date, ' ' DD-MON-YY HH24:MI:SS) TIMESTAMP.
  job_name,
  status,
  ERROR #.
  run_duration,
  INSTANCE_ID,
  additional_info
  Of user_scheduler_job_run_details;
  
  It works fine and I am able to get the information.
  now, to make it visible for read only account users - using «grant select» I gave access and created also means public.
  
  but it shows only the names of columns in read only account data.
  
  How to make this visible to read only account?
  
  Please guide.

  Views USER_ will have only the objects owned by the user executing the query... In your case, it will be only schedules made by the user.

  You will need EU ALL_ or view s/n (all_scheduler_job_run_details)

• Windows Server 2008 R2 NFS mounted data store is read only

  I've done this dozens of times in the past, but not with this exact combination successfully:

  ESX4 U1

  Windows 2008 R2 Server Datacenter edition

  NFS Server installed. TCP Version 3.

  The normal configuration that worked in the past:

  NTFS security - total control on ANONYMOUS logon, everyone control total

  The local policies, network access: Let Everyone permissions apply to anonymous users (applied automatically by Windows)

  NFS Sharing - ANSI encoding, allow anonymous access - UID = - 2, GID = - 2

  NFS share permissions - allow all THE MACHINES read-write, ROOT access

  The data store adds OK and appears in the list of data on vClient stores and can be viewed or directly via a Console logon.

  The problem is that the data store is read only! Nothing from ESX can write, delete, or update a folder or a file on the data store. Access Windows NTFS is very well.

  This means also you cannot boot from say a CD ISO on the data store, or create a VMDK guest virtual computer on the data store.

  Given that I had zero problems with this in the past, when with the help of ESX3 or ESX4 connect to Windows Server 2003R2 or several NAS with NFS devices supported I think Windows 2008R2?

  Has anyone seen anything like this before?

  I use it currently; It works fine, but it's the way that you configure the windows nfs export without having to use a mapping service (see images)

  Also, be aware that Windows System Cache is a bit less efficient than linux (but that's ok) you just need to add additional RAM at least 16 GB for the data store busy.

  I also recommend refining delays in setting up nfs for each virtual machine host:

  NFS. HeartbeatFrequency = 10

  NFS. HeartbeatFailures = 5

  And on windows change the properties of the NFS server in the locking tab

  customer collection lock wait 5