The selected data source is read-only

Similar Questions

• Where is able to select the GPS data source?

  Hi, guys.

  I have a question about the GPS.

  I want to know the source of GPS data.

  I think that 2 types of sources of GPS data as internal device of GPS and Bluetooth GPS Receiver.

  If the user has a BB with chip GPS and Bluetooth GPS Receiver, where it is able to resolve?

  And I thought that this version of the OS 4.2 and 4.3 and 4.5 - 4.7 have different parameters to set the GPS data source option.

  Thank you guys.

  Hello

  The GPS data source is available for consultation in Options - Advanced search - GPS. If you do not have an entry Advanced Options (pre - 4.3 software) then you should see a GPS option on the first screen of Options.

  Kind regards

  Mike.

• How to make the image Inline source to read from database BLOB column?

  Dear all

  I have a database table that contains the BLOB column. And tif files in the BLOB column.

  Now, I want to display the value of the BLOB file in af:inlineFrame.

  I want to do this because I installed "AlternateTiff" on my browser to view tif files in the browser.

  You can download it from http://www.alternatiff.com/

  The inLine frame component has a property called 'Source '. The value of the "Source" property must be the location of the URI of the content you want to display in the example of frame.for online:

                        <f:facet name="second">
                              <af:inlineFrame id="if2" styleClass="AFStretchWidth"
                                              shortDesc="To browse the selected document" source="/temp/myFile.tif"/>
  

  now, I want to change this example to read the content of the BLOB column.

  IS this possible?

  Thanks in advance

  You must install a servlet which reads the data from the BLOB and represents the data structure.  My blog http://wp.me/pcBZk-bU shoes how to proceed.

  Timo

• It is possible to apply again while the watch is opened in read-only mode?

  Hello
  
  I am using Oracle 11 g R2 (11.2.0.1.0)
  
  Step 1: Two-node RAC is configured.
  Step 2: A single node Data Guard RAC is configured. (i, e watch is a CCR node).
  
  Primary:
  
  SQL > select open_mode, database_role, PROTECTION_MODE, PROTECTION_LEVEL from v$ database;
  
  OPEN_MODE DATABASE_ROLE PROTECTION_MODE PROTECTION_LEVEL
  -------------------- ---------------- -------------------- --------------------
  MAXIMUM READING WRITING PRIMARY MAXIMUM AVAILABILITY AVAILABILITY
  
  
  Standby time:
  
  
  SQL > select open_mode, database_role, PROTECTION_MODE, PROTECTION_LEVEL from v$ database;
  
  OPEN_MODE DATABASE_ROLE PROTECTION_MODE PROTECTION_LEVEL
  -------------------- ---------------- -------------------- --------------------
  READING ONLY WITH APPLY A MAXIMUM OF PHYSICAL AVAILABILITY MAXIMUM STANDBY AVAILABILITY
  
  Question:
  
  I have not purchased active dataguard license.
  In my case in data custody BECAUSE it is possible to apply again while the database is opened in read-only mode?
  
  
  Thank you
  Solaiman

  876149 wrote:
  SQL > select open_mode, database_role, PROTECTION_MODE, PROTECTION_LEVEL from v$ database;

  OPEN_MODE DATABASE_ROLE PROTECTION_MODE PROTECTION_LEVEL
  -------------------- ---------------- -------------------- --------------------
  READING ONLY WITH APPLY A MAXIMUM OF PHYSICAL AVAILABILITY MAXIMUM STANDBY AVAILABILITY

  'READ ONLY WITH APPLY"in V$ DATABASE. OPEN_MODE means that active Data Guard is enabled.

  Oracle does not check if you have the right license: it's up to you to know which license, you have to your database environments.

• How to judge whether a data store is read only or not?

  Hello

  VI client, when I select the 'Mounting NFS read-only' checkbox during the addition of a storage, the storage will not be listed during VM creation.  I checked the MOB and the SDK web page, but have not found how to judge whether a data store is read only or not.

  Do me a favor please.

  -Akityou

  You should be able to get this information out of the HostMountInfo under mode http://www.vmware.com/support/developer/vc-sdk/visdk25pubs/ReferenceGuide/vim.host.MountInfo.html

  =========================================================================

  William Lam

  VMware vExpert 2009

  Scripts for VMware ESX/ESXi and resources at: http://engineering.ucsb.edu/~duonglt/vmware/

  repository scripts vGhetto

  http://Twitter.com/lamw

  If you find this information useful, please give points to "correct" or "useful".

• WebLogic ResourceLimitException with the JNDI data source

  I deployed a third web application on my Weblogic Server and this application connects to the Oracle database using the JNDI data source that I defined in my weblogic server. Now, while I use the web app, I don't see any problems and after accessing the request for some time, it throws an exception like below-

  
  

  weblogic.common.resourcepool.ResourceLimitException: No resources currently available in pool test_db to allocate to applications, please increase the size of the pool and retry.. caused by: weblogic.jdbc.extensions.PoolLimitSQLException

  
  

  I have increased the size of the pool earlier and I do not use the web app for a few hours, then when I started to use it, then I get this error. How can I debug this problem using my Weblogic Server? Is there a log file which contains details on why all connections are still used?

  It could be connection leak problem and haveInitialCapacity and MaxCapacity the same value(higer).

  Enable TestConnectionsOnReserve and check.


  
  

  Selectinactive-connection-timeout-seconds to check for the connection leak.

  Hope this helps.


  
  

  Debug JDBC and Debug JDBC Connection would give more information on the issue, make sure you increase the logging severity as well.

  
  

  Thanks,


• Can hyperic agents collect metrics from a server where the 'root' FS went to ' read-only '?

  Hello

  Can agent hyperic able to collect measures from a server where the 'root' FS went to ' read-only '?

  IE will be hyperic monitoring work if 'root' FS managed server went to fashion 'read only '?

  Thank you

  The agent record metric data in the local server in the data directory.

  These data will be sent to the Hyperic server.

  As a result, the agent must write permissions on local storage.

• How to make all the fields on one page read only (for the recipient) without having to make each field read-only?

  How to make all the fields on one page read only (for the recipient) without having to make each field read-only?

  Hello Jmbtexas4,

  By default, you will need to individually click on the fields of the form and check the 'read only' and save it. From now on, it is not possible to select all together and make the changes.

  -Usman

• Windows Server 2008 R2 NFS mounted data store is read only

  I've done this dozens of times in the past, but not with this exact combination successfully:

  ESX4 U1

  Windows 2008 R2 Server Datacenter edition

  NFS Server installed. TCP Version 3.

  The normal configuration that worked in the past:

  NTFS security - total control on ANONYMOUS logon, everyone control total

  The local policies, network access: Let Everyone permissions apply to anonymous users (applied automatically by Windows)

  NFS Sharing - ANSI encoding, allow anonymous access - UID = - 2, GID = - 2

  NFS share permissions - allow all THE MACHINES read-write, ROOT access

  The data store adds OK and appears in the list of data on vClient stores and can be viewed or directly via a Console logon.

  The problem is that the data store is read only! Nothing from ESX can write, delete, or update a folder or a file on the data store. Access Windows NTFS is very well.

  This means also you cannot boot from say a CD ISO on the data store, or create a VMDK guest virtual computer on the data store.

  Given that I had zero problems with this in the past, when with the help of ESX3 or ESX4 connect to Windows Server 2003R2 or several NAS with NFS devices supported I think Windows 2008R2?

  Has anyone seen anything like this before?

  I use it currently; It works fine, but it's the way that you configure the windows nfs export without having to use a mapping service (see images)

  Also, be aware that Windows System Cache is a bit less efficient than linux (but that's ok) you just need to add additional RAM at least 16 GB for the data store busy.

  I also recommend refining delays in setting up nfs for each virtual machine host:

  NFS. HeartbeatFrequency = 10

  NFS. HeartbeatFailures = 5

  And on windows change the properties of the NFS server in the locking tab

  customer collection lock wait 5

• System Restore will not restore the selected date, even if the date is in bold in the home

  It just says: cannot restore the selected date

  Usually, this is caused by your anti-virus program is interfering with the system restore.  Norton is especially guilty of this behavior.  Try restarting your computer in Mode without fail (repeatedly tap key the F8 key during the restart of the computer), and then perform your safe mode system restore.  When it restarts after you perform the restore, allow him to start in normal mode.

  HTH,
  JW

• 2 applications on the same data source vs different data sources

  Hello

  What is the difference between having 2 planning applications on the same data source with the same user on the DB and with each on a separate user name and the new data source?

  I have no problem space or privileges on the two schemas of the DB. I just want to know what the best technically?

  Thank you

  You need a separate data by application source otherwise each application will overwrite the other that they will share the same relational tables, if you want the planning application to work properly then two apps = two data sources

  See you soon

  John

  http://John-Goodwin.blogspot.com/

• Find the Oracle data source...

  I inherited a ColdFusion 10 app with a backend Oracle 11g; Windows Server.    I am especially a DBA and not an expert in ColdFusion.  In the application code, they have the hardcoded data source.  In other words, when I move to Test I have to change the source data, load the modules and test.   After a successful test, I need to change the data source, once again, to download and the promoted to production.   I seem to remember in the old application, I used to support, the code was generic and the data source depends on what server you were lit; If the development, testing or production, you don't have to worry.  I don't remember how it was done.   What would be the best way to eliminate this hard coding and make it more automated?   I know I'm probably missing something, but you were all very helpful to me in the last few weeks, so I hope that he is not a stupid question.   Thank you.

  I do not have Admin CF

  You can specify that?  Do you mean that you do not have access to the CF Admin?

  Not having access to the CF Admin, I'm not sure you can do something differently as you are now., unless you're writing a logic to examine the server host name or the domain name of the site and set the source of data accordingly.

  If you can access the CF Admin, create two data sources: one for production and one for testing.  Then in application.cfc, you can write logic to examine the server host name or the domain name and indicate 'this.datasource' to whatever datasource is appropriate.

  -Carl V.

• Error: unable to copy to the output directory, destination is read-only

  Hello...
  
  Help, please...
  
  I have a project that I just check in the files + files to harvest. After I deleted all the elements I have just check-in, I again opens the project in Jdeveloper, but when I recompile and run I hit this error:
  
  Error: unable to copy to the output directory, destination is read-only
  
  Help, please... I can't do anything on this subject as it is to show read-only... When I try to compile the java files even case:
  
  Error writing class java.io.IOException: cannot create output file
  
  
  Help, please...

  Hello

  In Jdeveloper, right-click on the project and go to the project properties menu

  In the content of the project, you can see the output directory path field,

  go to the path and give all the permissions in the folder

  I'm not sure what harvest is, but check if this helps you

  Concerning
  Ravi

• Change the physical data Source in DAC

  I need to extract data from instance DEV2 of Siebel instead of DEV1.
  So I change the name of the database, the username and the password under the Data Sources tab physical under the SEBL_VERT_80 data source Configuration.
  I've generated parameters and rebuilt the execution plan. However when I run the execution plan certain tasks fail and I noticed in the log of session that the ETL jobs always seek to extract data from the DEV1 instead of DEV2.
  
  Can you get it someone please let me know what I might be missing? How can I make CCIP run ETLs on the DEV2 database?
  
  
  Thank you

  Let me know if that solves the problem or if the problem persists.

  -Austin

• ADF select several shuttles become read only when the value is

  Hello

  I want to ask about the select oracle ADF that many shuttle.

  Recently, I want to create a shuttle a lot with the pre value is set in the right box, select. When I try to set the value of the shuttle to select several properties. The shuttle many select transformed into an object as input like the image below text

  

  but when I'm not set to select several shuttles it became normal like that

  

  the method that I put in the value property is like that

  public list < BidClassification > getListBidClassificationTaken() {} finalClassification = new ArrayList(); The OperationBinding class method = ADFUtil.getMethodBinding ("retrSupSupplierClassificationFindAllBySupplierId"); method.getParamsMap () .put ("supplierId", getSelectedSupplier () .getId ()); List < BidClassification > finalClassification = method.execute () (list < BidClassification >). Return finalClassification; }

  the method that I use to set the position data is like this

  public list < SelectItem > getListBidClassification() {} retval = new ArrayList(); The OperationBinding class method = ADFUtil.getMethodBinding ("retrBidClassificationFindAll"); listBidClassification = (list < BidClassification >) method.execute (); for (BidClassification bc: listBidClassification) {} SelectItem item = new SelectItem(); item.setLabel (bc.getId ()); item.setValue (bc); retval. Add (Item); } Return retval; }

  I have already replace the method equal in the BidClassification class so there will be no more no problem

  Header 1
  < af:selectManyShuttle label = 'Grading' id = 'sms1"binding =" #{backingBeanScope.backing_vendorEdit.sms1} ' " leadingHeader = 'Ranking Master' trailingHeader = 'Grading of provider' > < f: selectItems value = "#{backingBeanScope.backing_vendorEdit.listBidClassification}" id = "si1" "

  Binding="#{backingBeanScope.backing_vendorEdit.SI1}"/ >

  < / af:selectManyShuttle >

  This the jsff xml where I put the shuttle several select no defined value

  < af:selectManyShuttle label = 'Grading' id = 'sms1"binding =" #{backingBeanScope.backing_vendorEdit.sms1} ' "

  leadingHeader = 'Ranking Master' trailingHeader = 'ranking of provider.

  value = "#{backingBeanScope.backing_vendorEdit.listBidClassificationTaken}" >

  < f: selectItems value = "#{backingBeanScope.backing_vendorEdit.listBidClassification}" id = "si1" "

  Binding="#{backingBeanScope.backing_vendorEdit.SI1}"/ >

  < / af:selectManyShuttle >

  Select this the jsff xml where I put the shuttle well with the value

  someone has an idea of what's going on with this code? ___. thx a lot btw

  @

  Yeay! I already fix it!

  BTW who behave the same as me.

  You must make a note on the setter and the Get accessor of the variable list you use

  * in my case, I don't implement the setter method and the list