Read the bus number

Similar Questions

• Read the serial number in LabVIEW of USB-8476 LIN Module

  Is it possible to read the serial number of a USB-8476 module in LabVIEW. I am building a system that will use 10 of these modules in a single system and I want to be able to verify this LINX = serial No.: ABC. I'm afraid that a 'user' will disconnect and the plug-in a USB module causing the FLAX number to change.

  Hi graveux,

  The ncGetHardwareInfo.vi with the attribute set to "Serial number" should do the trick (use the desired USB interface and port number 1 as inputs).

  -B2k

• Read the serial number of the PXI 8130

  Hello:

  Anyone know how to read the serial number of an SMU-8130 chassis controller programmatically? Read the serial number of a 1075 chassis will work also.

  Is it still possible?

  Thank you very much

  -Ilya.

  My apologies, as this thread is expanded to LabVIEW, I was assuming that the main language was LabVIEW. Currently, it is not a condition C library that reproduced the personality of the Configuration of the system. My understanding is that this feature is in the works, but not yet implemented.

  In the short term, you can choose to compile the necessary features of LabVIEW in a DLL called by your project. Otherwise, the MAC address can still be used as a unique identifier, if that's what you need.

  See you soon,.

• write/read the serial number of 32-bit

  Hello

  I want to read and display the number of 32-bit Seraglio and then want to store in a text file. every time I scan the new serial number, whenever it needs to store the new number.

  What exactly is the problem you are having? The task is very simple and has been discussed before. If you use a bar code scanner, just search the forum which. If you post the code you've written, a person could look and see what the problem is (if in fact you describe the problem).

  And in case you've not seen it before, there are tutorials available.

• Failed to read the serial number or of SNIDS on label Aspire 5100.

  Hello

  I use the search function but did not find a question quite like this - little surprising?

  A family member gave me a laptop Aspire 5100 that no power, fear of the system board.  Not seem to receive a wave of newer computers with bad cards system.  The label on the back of the laptop with the number of series & NSID is faded & I can't do all the numbers.

  Since I will very probably be pulling apart anyway is everywhere, maybe inside, where the serial number or the SNID could be printed?

  The manual lists this laptop to use ATI Radeon® Xpress 1100 or Xpress1200 chipset - I can't tell the difference between the two.  All system boards for sale seem to only list Xpress 1100 chipset that will probably work but a little clarification on Xpress 1100 vs 1200 would be nice.

  Thank you

  Can try it analyzes, you'd be surprised to know that can capture even a little expensive HP scanner/printer.

• Text flow create a delay when an overflow creates a new page, which prevents you from reading the page number, in error

  Hi all!

  I create a script to automatically generate a catalogue of photos; the idea is to prepare a master document with a text block in the master full of self flowing, then insert images with their legend by the script, let the system automatically creates the following pages when necessary, by a single stream of text.

  My catalog is divided into sections, each represented by a different master spread; So I know what page I work when the script put there a picture just to link the current page in the master spread appropriate.

  To simplify what I got most of my script here, using text instead of images:

  / * load a master document, only containing a block of empty text in the master spread, connected to the main text stream * /

  var doc = app.open (new File("~/Desktop/mySampleDoc.indd"));

  / * I'm working on the story, thinking that every time that the textframe of first page will be full, we will create another block of text on the next page (automatically created) * /

  var history = doc.pages [0] .textFrames [0] .parentStory;

  / * now, I put a few lines of text in history, pending the creation of a new on the first page will be complete * /

  for (var i = 0; i < 100; i ++) {}

  / * This is the following line: * /.

  .silence story.insertionPoints [-1] = "This is line n." + i + "\r";

  / * here, I want to know what page is the line just created (the error is generated here just in the creation of the new page + block of text) */

  Thispage = story.insertionPoints [-1] .parentTextFrames [0].parentPage.documentOffset;

  / * and now I print the page number * /.

  story.insertionPoints.item(-1).contents = "current page:"+ thispage + "\r"; ".

  }

  The big problem is: when the first block of text is full and overflow is generated, a new page with a new block of text from the main text flow (as the master spread) is generated. but it seems my script requests the page number before the new page with the new text block is born and an error is given.

  It seems that the script goes too fast regarding the creation of the new page.

  If I remove the line thispage = story.insertionPoints [-1] .parentTextFrames [0].parentPage.documentOffset; everything is ok.

  I tried to introduce a delay up to 3 seconds with no effect.

  I tried also to view or zoom in the request of page number, thought new page to force the system to wait for the page is truly born, also without effect (by the way, I wasn't able to view the page in adding the script of the text!).

  Can someone help me?

  A big thank you to everyone

  Roberto

  Have you tried using myDoc.recompose () before the application for compensation?

• Read the serial number of the device in LabView COM port

  Hello

  Is it possible to read a device COM port number in LabView? I would like to make an initialization of the program following the right port COM of a device, for example a USB temperature reading device, and set the COM port as the correct port at the start of the main program of LabView. I want to do that, because a USB device gets usually different dedication of COM port on different computers. Our application runs on 80 different computers. A program like that would be very nice.

  Can someone help me?

  Paal

  Another thought. It also has a place where certain standards can save you a lot of time.

  You have 3 dongles by machine. When setting up a computer are these three dongles * always * assigned to, for example, com 3, com 4 and com 5.

  Similarly, always check that instrument 1 is always on com 3, tool 2 is always on com 4 and 3 device is always on com 5.

  This convention will also simplify debugging...

  Mike...

• read the specific number of the txt file

  Hello

  Anyone know how to read specific numbers to a txt file.

  If the operator choose tab1. The values displayed will be the first list of numbers. Otherwise the values shown on the table are the second list

  Thanks in advance for your help

  Please find enclosed my VI and the txt file

  My best regards

  Nadia

  The format of your example tab.txt file in do you need?

  If not, I do not consider using a format such as LabVIEW Config File VI or a common standard such as XML.

  If you don't need the exact format in the example, then you will need to write your own parser for him.

• How to read the version number of a DLL?

  Hello

  is - anyone has example code on how to get the version of a DLL file? I know it should work with the function GetFileVersionInfo (.) , but I get errors link project get, but including the "window.h»

  Thank you!
  Greg

  just found the solution in the SDK samples samples\sdk\verinfo\verinfo.cws'.» ...

• How can satellite M30x, I find the model number?

  Hello
  need to get the drivers for my old Toshiba Satellite M30x *. The stickers below are washed out and I can't read the model number more.

  How can I know the model number to get the right drivers?

  Thanks for help

  Hello

  I checked the Toshiba download page and for Satellite M30x it is a model only PSA72E.
  So just visit download page of Toshiba under http://eu.computers.toshiba-europe.com > support & downloads.
  When you open the download under product type area, select option ARCIVE and you will find the drivers for your model laptop.

  If you have any other questions please let us know.

  Good luck!

• Satellite L300-21F - where can I find the serial number?

  The ink on the toshiba money serial No./model No. Panel at the back of my laptop rubbed off after only a week of use, when I bought the pc last year. I now have a problem with my touchpad registers is not the movement of finger-cursor or shots at normal pressure. I have to press more strong most of the time for the action to be recorded. A third of the time it works fine at normal pressure.

  It is still under warranty. Unless someone can tell me of a possible reason for this [someone]? so I guess I should probably send it in for repair.

  Where can I find the serial No. information? It is stored electronically on windows anywhere? I have only a rough idea of what is the serial number - I managed to write most of it when I noticed that he had started to rub. I don't think that my laptop is saved online and I don't have the paperwork that came with the laptop in its box.

  Thanks for any help

  null

  Hello

  I m wondering really that you can read the serial number on the underside of the t more after a week not where you use Notepad?

  In any case, I have the Satellite L300 too with Windows XP preinstalled. If I start Diagnostic PC Toshiba tools I can visualize all the details on my laptop and see also the serial number.
  Check this box!

• read the version imbue

  How can read the version number form an exe

  Do a search on 'Version of the executable' and there are a number of steps in this regard and a lot for example VI that you can use.

  http://digital.NI.com/public.nsf/allkb/D45E3A1E694815AD86257173005CFD36

  http://digital.NI.com/public.nsf/allkb/935BA7FB426305398625711E0055F1FA

  http://forums.NI.com/T5/LabVIEW-idea-exchange/make-App-version-return-the-application-version-not-th...

• M127fn MFP: How to read the meter of pages on m127fn mfp

  How to read the total number of pages printed on this m127fn MFP?  In status screen supplies, it shows only "pages printed with this offer.

  Due to another problem, a technician from HP told me through a hard reset, after which I had to get all of my preferences. So this mave have reset the NVRAM that is associated with the page counter as you suggest. I installed the latest firmware today but the page counter is at 104 and supplies report 634 and "basket is very low" message that is expected since it is a life of aprox 700 starter cart.

  Thank you for your insight and suggestions. I'll keep an eye on the config. page counter when I start a new shopping cart.

• Restore the serial number of Adobe standard CS6.

  Hello!

  Our product - CS6 Adobe Standard. Gains in 2012.

  Problem: When you open a session using the message get a trial version (!)

  Using Adobe ed and password. But the programs require a serial number. The serial number is lost.

  The goal of treatment - the restoration of the serial number.

  Sincerely.

  This theme has information on programs designed to read the serial number of an existing installation

  Lost information - response #1 in https://forums.adobe.com/thread/2008767 (for Mac or Windows programs)

  non-Cloud http://helpx.adobe.com/creative-suite/kb/trial--1-launch.html back to the test

• Reading the part of a string

  I have a table with a column "otname."
  Table1.otname contains several lines of alphanumeric string that resembles the following sample data:
  
  11.10.32 * 12 *. U.A.F.3.2.21.249.1
  2001.1.1003 * 8281 *. A.THE. PAINVIN
  2010.1.1003 * 8261 *. A.THE. B.B
  
  I want to read the fourth number in each chain (part of the string in bold) and write a query in Oracle 10 g
  to read its description stored in another table. My dilemma is to write the first part of the query.i.e. Choose the fourth issue of each string in an array
  
  My second query will be something like this:

  select description_text from table2 where sncode = 8281  -- fourth part of the data sample in every string

  Thank you very much.
  
  novice

  Oops... I forgot to change that:
  Fixed query:

  SELECT   description_text
     FROM   table1, table2
    WHERE   SUBSTR (otname, INSTR (otname,'.', 1, 3)
                           + 1,
                           INSTR (otname, '.', 1, 4)
                                - INSTR (otname,'.', 1, 3)
                                - 1)
                                 = sncode
  

  This will return rows from your table if the sncode appears as the fourth string (delimited by '.') in otname. What is your requirement?

  Kind regards
  JO