read the contents of the table

Similar Questions

• WARNING: dell_psp_eql_routed: PspEqlReadRoutingTable:1138: cannot read the table on page

  Hello community,

  We went just to ESXi 5.1.0 build-1021289. We have installed MEM 1.1.2 and used to configure all of the iSCSI network and has chosen to use our BCM57810 10G cards for unloading rather than use the SW initiator. We are currently on firmware 5.2.6.

  We now see this error constantly in the vmkernel logs.

  2013-05 - 04 T 21: 06:40.074Z cpu4:240833) WARNING: dell_psp_eql_routed: PspEqlReadRoutingTable:1100:Invalid size package of page table (length 4096, 338 expected)
  2013-05 - 04 T 21: 06:40.074Z cpu4:240833) WARNING: dell_psp_eql_routed: PspEqlReadRoutingTable:1138: cannot read the table on page
  2013-05 - 04 T 21: 07:08.085Z cpu4:240833) WARNING: dell_psp_eql_routed: PspEqlReadRoutingTable:1100:Invalid size package of page table (length 4096, 2528 expected)
  2013-05 - 04 T 21: 07:08.085Z cpu4:240833) WARNING: dell_psp_eql_routed: PspEqlReadRoutingTable:1138: cannot read the table on page
  2013-05 - 04 T 21: 07:08.091Z cpu4:240833) WARNING: dell_psp_eql_routed: PspEqlReadRoutingTable:1100:Invalid size package of page table (length 4096, 2528 expected)
  2013-05 - 04 T 21: 07:08.091Z cpu4:240833) WARNING: dell_psp_eql_routed: PspEqlReadRoutingTable:1138: cannot read the table on page
  2013-05 - 04 T 21: 07:08.099Z cpu4:240833) WARNING: dell_psp_eql_routed: PspEqlReadRoutingTable:1100:Invalid size package of page table (length 4096, 2528 expected)

  We did all the additional configurations generally suggested - disabled ACK delayed, disable LRO, iSCSI timeout.
  I can't tell if it's having an impact on our performance or reliability. He sees not to be. However, these errors constantly fill our vmkernel logs.
  Out of curiosity, I went our adapter SW config and I do not get these more. We would really prefer to use unloading iSCSI broadcom cards now that the frames are supported. Has anyone seen else this error or know how I could get more details about this?

  ESXi 5.1.0

  Build-1021289

  The problem is the new broadcom driver, when you use the mode of unloading iSCSI.  VMware and Broadcom to release a patch.   For now just use the iSCSI SW.

• READ the TABLE of another schema

  Hello
  pls help me.
  
  I want to read the table of another schema that is declared in the application of the apex.
  
  SELECT * FROM DBA_ROLE_PRIVS;
  (SELECT * FROM sys.) DBA_ROLE_PRIVS: auch bad)
  
  The owner of this table is SYS.
  
  Error: The Table is unknown or cannot be found.
  
  my real schema is GCs.
  
  How is the select statement for this case for reading in the table (or tableview) of another schema?
  many and many thanks for your help.
  TL

  The SYS schema is a special schema in Oracle. You must explicitly grant the user rights by selecting tables and views sys.

• Why the SD-R6112 drive will not read the table of contents through DVD Decrypter?

  Why the hell used my reading of DVD-ROM/R/RW Toshiba SD-R6112 the TOC through DVD Decrypter?
  She normally does! I use nero, Decrypter, DVD Shrink, and even Windows medai Player 9 series.

  It was working fine 2 days ago now pfft, will not work. Everything in the settings of the device checked, said everything works properly without conflicts. I unloaded the driver and rebooted then loaded it, same problem. I tried a disk driver that came with my laptop and is responsible, it is very good, so I take this CD work correctly, but won't load DVD. With DVD Decrypter, it says: could not retrieve the table of contents.

  There must be a solution!

  Hello

  Are you trying to make illegal copies of DVD? ;)

• 1st reading the table

  I'm currently reading the first reading greater than 0.5 in each column of the table.

  

  

  Like this?

• Table of index always returns zero when reading the table 3D

  I have a 9 x 2000 x 5 table table 3D diamension.  I have this table filled with data and when I try to read a data point unique on the table the function Index Array always reads zero. I place a probe on the 3D input array and when I put in the index of the probe to the same data point the probe shows the value stored in the table. I also have an indicator showing the 3D table and it displays data in all locations. For example if I try to read the location 0, 144.0 in 3D it array always return zero. Yet I know that the value of this element is 6.8616E - 5. Each item I try to retreave table gives zero.

  Anyone saw the Index room table this kind of behavior?

  Problem solved. As usual, it was pilot error on my part had knocked down the lines of lines and columns.

• Dynamically read the table name in the query update

  Hi all

  I am trying to run the updated sql query where the name of the table should be read dynamically from another table below.

  Please let me what wrong with my request.

  setting a day (select CONCAT('T',schemaid) from outline, which the name = 'Analyzer') set c7 = 99;

  "outline" is a table that contains two columns name and schemaid.

  all the table created in our database with the prefix 't' T4345 for example.

  I did as suggested by you

  No, you didn't.  I did not any package creation code in my example, in order to better that you you point the finger.

  Your syntax is invalid for creating a package with the code like this, please read on creating packages and procedures within them if that's what you want to do.

  In addition, your package creation statement is to create a package specification, but you put in the code which must be in a package body, not a notebook loads.

  It should be something like (untested since I don't have your tables)...

  create or replace package my_packg as
  procedure dowhatever.
  end;
  /

  create or replace package body my_packg as
  dowhatever procedure is
  TBL varchar2 (30);
  Start
  Select 't' | SchemaId
  in tbl
  of outline
  where name = 'Analyzer ';
  run immediately 'Update'. "TBL |' set c7 = 99;
  end;
  end my_packg;
  /

  and then call this procedure by calling my_packg.dowhatever ();

• Read the table xmldata

  Hello
  
  I created the following contains only one column
  
  create the table book_inf (booksinf clob);
  
  the booksinf column contains the following xmldata
  

  <BOOKS>
    <BOOK-ID> I1001 </BOOK-ID>
    <BOOK-NAME> SQL </BOOK-NAME>
  </BOOKS>

  How to read the book id values and the book-name one by one using DBMS_LOB.
  
  can someone help me... ?

  You would be better using an XMLTYPE column to store your XML data.

  SQL> create table book_inf(booksinf XMLTYPE);
  
  Table created.
  
  SQL> ed
  Wrote file afiedt.buf
  
    1* insert into book_inf(booksinf) values (XMLTYPE('I1001SQL'))
  SQL> /
  
  1 row created.
  
  SQL> ed
  Wrote file afiedt.buf
  
    1  select x.*
    2  from   book_inf
    3        ,xmltable('/BOOKS'
    4                  passing book_inf.booksinf
    5                  columns book_id   varchar2(20) path './BOOK-ID'
    6                         ,book_name varchar2(20) path './BOOK-NAME'
    7*                ) x
  SQL> /
  
  BOOK_ID              BOOK_NAME
  -------------------- --------------------
  I1001                SQL
  

• How to read the table of SQL: ActiveRecord

  We try to write a script here to interrogate a database that maintains an inventory of our servers and automatically increment the server name to the next available number in the string.  We are able to query the database, but the output seems to be encrypted as it is not readable.  I think I need to convert it somehow to make it useful.  Someone knows how can I do this?  I'm kinda new to javascript, so it's all new to me.

  Here's the script we have got so far.

  var preservername = resultVMName;

  function zeroPad (num, count)

  {

  var numZeropad = num + ";

  while(numZeropad.Length < Count) {}

  numZeropad = '0' + numZeropad;

  }

  Return numZeropad;

  }

  var query = "SELECT MAX (ServerName) FROM servers WHERE servername as ' % ' + preservername + ' % ' limit 1';"

  System.log ("Executing query" + query + "on the database" + database.name);

  resultRecordsOut = database.readCustomQuery (query);

  System.log(resultRecordsOut[0]);

  var maxserver = resultRecordsOut [0] m:System.NET.SocketAddress.ToString ();

  System.log ("It's the value of maxserver" + maxserver);

  var prenumber = maxserver.substring (0.10);

  var number = parseInt (maxserver.substring (10,13));

  var newnumbers = zeroPad (numbers + 1, 2);

  var newname = prenumber + newnumbers;

  System.log (NewName);

  OK... so I think that the last piece of the puzzle, here it is!  The value of each column is stored as a property inside the table, therefore, I think that you need to do is something like this:

  resultRecordsOut = database.readCustomQuery (query);

  resultLastRecord = resultRecordsOut [resultRecordsOut.length - 1];

  System.log (resultLastRecord.getProperty ("MAX (ServerName)");)

  
  

  This can get you where you need to be, more or less.
  

• How to read the table of string returned by the DLL

  I developed DLLS in labview that takes 2 input parameters as a string and returns an array of strings in return. How can I read back this array returned strings in labview? I tried to return a string and I can't able to read. But how to read a table?

  Is the signature of the function – void GetLoginInfo (char [] DBPath, char [UserName], LStrHandleArray * table)

  Shrinivas

  I found the solution. When you configure the node to call a library function, the argument (in which we expect an array of string) type should be chosen as "Adapt to the Type" and data format to be "pointers to the sleeves.

• Playback of a view is much slower than reading the table

  Hello
  
  I use the view in the physical layer. Query from this point of view is quite compilcated. However if I use correct filters the result is very fast (a few seconds)
  
  Responses of dashboard if I put a few columns from this point of view, and use the same filter, to 4 to 5 minutes to get the result. I don't know why the reading of the opinion is so slow on dashboard.
  
  If I create a table based on the view and use this table in the physical layer, then the result is much faster.
  
  Thank you

  Hello

  When the function u view the report in the bi bottom server sends the request to the database (if the cache is disabled).
  Come see, you already mentioned this query view is quite complicated, fires every time the query whenever you click on the report and checks all aggregations, the filter conditions, and joins.
  come to table, you are calculated and stored, each time that you run the report he just send the query like Select from table *.

  for this reason, the data view recovery is slow to table.

  See you soon,.
  Aravind

• Read the table for the next value (sequence issue)

  Is there a function in line with my_seq_no.nextval that can read a value from the previous field and get the next number in the sequence? I know how to create a sequence, but I thought that there is something as a function of getnextval.
  
  Thank you.

  Preston,

  The problem is that there is no such thing as a previous value in Oracle.
  You must specify a way (like number maximum.. etc..) to get the expected value.

  Sometimes, you can see the code as...

  insert into emp values
  (select max(empid) + 1 from emp) new_emp_id,
  ''XYZ' ename,
  .......
  ....
  ...
  from dual;
  

  As seen... the code above takes the maximum value of the emp table and gives you the identificateursuivant emp.

  The problem here is that all currently connected users will get the same value for the new empid, until a person inserts a record, then... all others would be unique constraint errors (if you have constraints on the right in place).

  Using sequences is the right way to ensure that all concurrent users get their own unique values for the new values.

  As for the getnextval, they could always get to a function which selects to the max (column-name) + 1 and returns it... but it has the same problems as the insert... Select above... So I would rather not provide code for such a thing... I would do more damage than help it. Please use a sequence for your case.

• Create the table and take the name of user who can read/write on this table

  Dear gurus,
  
  I need to add the following column in Oracle 11g DB AND also add the name of user who can read/write ONLY the following table, any table to access the same read?
  
  I use to go to Oracle PL/SQL client.
  
  My dbname is 'customerdb '.
  
  TableName: "extractOrders."
  
  +: example of the field data.
  Column0 = logID: 1
  Column1 = idNumber: 39D13613-F061-D38D-100A-16536409C6D8
  Column2 = timestamp: 2011/07/11-13:45
  Column3 = resultCode: 40509
  Column4 = resultMessage: could not find the IDENTITY card
  Column 5 = number: 9813080808
  Column6 = iid: 87670200100001466100
  Column7 = products: D1430 | "' S1412 ' | "" S1407 | "' S2607 ' | "' S1417 ' | "" S1411 | "' S1413 ' | "" S1502 | "" S1406 | "' S1522 ' | "' S1524 ' | "' S1474 ' | "" S1473 ".

  user596669 wrote:

  I need to add the following column in Oracle 11g DB AND also add the name of user who can read/write ONLY the following table, any table to access the same read?

  I use to go to Oracle PL/SQL client.

  Let's say your table than extractorders is the schema of database clientsproperty.

  As this pattern create a stored procedure that runs with the privileges of the customerschema. Having this procedure return a ref cursor For example

  create or replace procedure ReadExtractOrders( c in out sys_refcursor ) authid definer is
  begin
    open c for select * from extractorders;
  end;
  

  As this code executes with the privileges of the customer schema it can read the table belonged to this scheme.

  Now give execute rights on this process for the Joe database schema - and this pattern can create a cursor on the table of ExtractOrders , without being able to access or use directly or refer to this table. Read access to this table is therefore protected by a reliable code belonged schema customers.

  Learn about the AUTHID clause and how it can be used to differentiate the code approved and non-approved, which allows to PL/SQL code to run with different privileges than the demand for prescriptions.

• rotate the table

  Hello!

  We have a 1Darray with values and we want to rotate/shift values (3 positions). But she moves whenever we want to read the table.

  For example: we have [1 2 3 4 5 6 7 8 9 10] and we want for the quarter 3 positions as [10 9 8 1 2 3 4 5 6 7] we want to send this table, read it and then turn and read every time until we get the first table.

  Should we use loops or we can put directly?

  All responses are welcome!

  Thank you!

  Why did - it always people who insist on the things a way more complicated than it should be...

  

• How do I update the table in Jdev

  Hello

  I use Jdev 11.1.1.7.1.

  The control of data, I added that ADF only read the table. When I click on the button create and return to the report screen, highlight lines are added.

  Highlighted those who is not inserted into the DB table but he showed in the report. How to remove it. How can I update the table?

  

  Kindly advice me.

  Thank you

  Swathi

  That's what I got:

  -You have a table read-only, and a link to create.

  -When you press the link create a popup will be launched with a new record (may be a form in the same table iterator).

  -When you press save to save the changes validation triggers, stop you to insert the record.

  -After the fire of validation you will close the pop-up window (by pressing icon or by pressing Cancel).

  -After closure of the pop-up window, you will find that reading one table has some blank lines.

  If it is your problem if you have 2 choices:

  1. in the AppModule you can make a new instance on the view object (to which redirect the table) If your view object called 'EmployeesView', so, in AppModule, you should have EmployeeView1 and EmployeeView2 and your table may point to EmployeeView1, and when you create new line create in EmployeeView2 and after completing the creation you can run the query and then refresh the table (as shown in the following code).

  2 - the second option in the popup cancelListener link at the rear bean method then you can update the table by program as:

      DCIteratorBinding iter = (DCIteratorBinding) BindingContext.getCurrent().getCurrentBindingsEntry().get("TableIteratorName"); // from pageDef.
      iter.getViewObject().executeQuery();
      RequestContext.getCurrentInstance().addPartialTarget(getTableComponent());// from table Binding property bind it to object in back bean
  

• READ the events when you insert data into a CLOB to waiting

  Hello people,
  
  I too read waiting for IO (db file sequential read) on a CLOB, when data is inserted, and I don't understand why.
  
  Statement:
  INSERT into TABLE (< all columns list >) values < list of all values >;
  
  Duration:
  between 250ms and 500ms, so much is too long by far
  
  Location:
  * Database 11 GR 2 (11.2.0.3.0) Standard Edition on Linux (OEL 5) x86_64
  * Usually, I have about 200 of these inserts in a single transaction. Thus, generally such a transaction is open for at least 50 seconds.
  * This is an OLTP environment, so I can't drop indexes or constraints 'before' loading, in fact I'm loading and reading the table all the time.
  * Insertion happens simultaneously by multiple Java threads, all in France via JDBC thin driver.
  * The table is not partitioned (Standard Edition).
  * The table contains < 7 million lines.
  * I can't ADD, because the table is served in a logical way, and I do not have maintenance windows to rearrange segments.
  * There are a lot of NON NULL and check constraints simple insertion-value based on the table, but only SINGLE (as part of the numeric primary key) constraint.
  A column is a CLOB, but there is no constraint on the CLOB column.
  
  What I have done:
  Raised the execution plan. Here it is:
  ------------------------------------------------------------------------------------------------------------
  | ID | Operation | Name | Begins | Cost | A - lines. A - time | Pads | Bed | Written |
  ------------------------------------------------------------------------------------------------------------
  | 0 | INSERT STATEMENT. 1. 1. 0 | 00:00:02.75 | 5064 | 840. 2.
  | 1. LOAD TABLE CONVENTIONAL | 1 | | 0 | 00:00:02.75 | 5064 | 840. 2.
  ------------------------------------------------------------------------------------------------------------
  
  I tried to find out where all this runtime will, so I enabled level 12 10046 for this SQL tracing and tkprof analysis shows:
  
  Elapsed time are waiting on the following events:
  Event waited on times max wait for the Total WHEREAS
  ----------------------------------------   Waited  ----------  ------------
  DB file sequential read 61 0.01 0.29
  direct path write 30 0.01 0.00
  direct path read 15 0.00 0.00
  
  = > So now I know where my runtime is spent on: reading!
  
  The raw trace file says:
  
  WAITING #139690535902720: nam = 'db file sequential read' ela = 8514 file No. = 5 block #= blocks 16950925 = 1 obj #= tim 84425 = 1354644922207564
  WAITING #139690535902720: nam = "Write direct path" ela = 376 of file = 5 first dba = 16956449 block cnt = 1 obj #=-1 tim = 1354644922208331
  WAITING #139690535902720: nam = 'db file sequential read' ela = 321 file #= 5 block #= blocks 16956449 = 1 obj #= tim 84425 = 1354644922208727
  WAITING #139690535902720: nam = "direct path read" ela = 216 number of file = 5 first dba = 16956449 block cnt = 1 obj #= tim 84425 = 1354644922208998
  WAITING #139690535902720: nam = "Write direct path" ela = 375 folder = 5 first dba = 16956449 block cnt = 1 obj #= tim 84425 = 1354644922209458
  WAITING #139690535902720: nam = 'db file sequential read' ela = 5471 file #= 5 block #= blocks 8907590 = 1 obj #= tim 84422 = 1354644922215025
  EXEC #139690535902720:c = 2999, e = 18440, p = 4, cr = 14, cu is 38, SIG = 0, r = 1, dep = 0, og = 1, plh = 0, tim = 1354644922215246
  "STAT #139690535902720 id = 1 cnt = 0 pid = 0 pos = 1 obj = 0 op ='LOAD TABLE CONVENTIONAL (cr = pr 14 = 4 pw = 2 time = 16415 US)"
  OUTCOME #139690535902720:c = 0, e = 17, dep = 0, type = 1, tim = 1354644922216200
  
  obj #= 84425 is my CLOB
  
  
  Now my question:
  Why my reading INSERT a CLOB so heavily when inserts a row of data in my table?
  I wasn't able to find out, please share your thoughts.
  If you need more/other information, let me know.
  
  I thank very you much in advance!
  
  Best regards
  Martin Klier
  Principal, s/n

  Please check MOS note:
  Insert a LOB has bad performance; ARM reads in the Top 5 of the wait events [ID 1291494.1]