Read the settings from the Illustrator

Similar Questions

• How to implement the reading of data from a matte file on a cRIO?

  Hi all!

  I'm still not sure, it is plausible, but I'll ask rather before you begin complicating. So far, I found no useful information on reading in the data to a device of RT from a file (type of a simulation test - data is simulated).

  I have the MatLab plugin that allows the storage of data read a MAT file, which has a number of columns that represent the different signals and lines representing the samples at a time (depending on the time of the sample - sample every time has its own line of signal data).

  I have no idea how to implement this at cRIO.

  The idea is:

  I have some algorithms running on the controller of RIO in a timed loop. As the entries of these algorithms I need to access each of the values of columns in the row, which is the time of the sample (sort of a time series - without written actual times).

  I am fairly new to RT and LV development, so any help would be appreciated.

  Thank you

  Luka

  Dear Luka!

  I think the reading of all the samples in a single channel is exactly what you need here, because reading the files may take some time and is not deterministic, so it is best to read all the data in memory (or if this is not feasible due to problems of size, fairly large pieces may be sufficient). The table read can be provided and then in the loop simulating outings, something like this:

  

  I used here separate channels so it's more graphic, but you can build all the channels in a 2D array and array index corresponding to the samples fom 1 who. You can also use for loops with indexing as tunnels are setup and then you won't need the index functions and the number of iterations is also set automatically, but you have to take care of synchronization settings.

  Best regards:

  Andrew Valko

  National Instruments

• How to change the BIOS settings to read the Norton CD?

  In accordance with the instructions of Norton, I need to temporarily change the BIOS setting so that my computer will read the CD that has a Norton Bootable Recovery tool to start the computer. Norton's other attempts to remove the W32. SillyFDC.BDP worm failed, so they recommend using their recovery tool. How can I change the BIOS? Thank you.

  In accordance with the instructions of Norton, I need to temporarily change the BIOS setting so that my computer will read the CD that has a Norton Bootable Recovery tool to start the computer. Norton's other attempts to remove the W32. SillyFDC.BDP worm failed, so they recommend using their recovery tool. How can I change the BIOS? Thank you.

  You may or may not need to change the BIOS settings.  Assuming that you have a bootable CD with this tool, put it in your CD drive and restart the computer.  One of the 3 things will happen:

  1. the computer starts from the CD and you can follow all instructions you have Symantec.

  2 watching very carefully that the computer starts.  You may see a message that says something like "press any key to boot from the CD-ROM.  If you see this message, press a key (for example, the space bar) and the computer boots from the CD.

  3. watch very carefully that the computer starts.  You will see a message that says something like, "to change settings, press F1."  The key that you press on will be different depending on your particular computer.  It might be F1 or F10 or del key.  Whatever it is, press this button and you will enter the BIOS configuration utility.  From there, you can change the boot order to CD first.  Directions to navigate the BIOS Setup will be displayed on the screen, but they will involve using the button tab, enter, and arrow keys, because your mouse does not work in this utility.

  You can also take a look here: http://www.bleepingcomputer.com/forums/topic228631.html

• Synchronization of the settings of the Illustrator

  I have a problem with the synchronization of the settings of the Illustrator. I just installed CC on another computer and tried to synchronize the parameters from the cloud in the new installation of illustrator, but nothing happened. It worked OK for Photoshop and Dreamweaver, but I does nothing.

  Hello dv8kiwi,

  The AICC settings will be synchronized with the version of the AICC 2014. It is currently a limitation in the functionality of the synchronization settings. So, you will need to have the same version of AI installed on computers signed using the same Adobe ID.

  Please let me know if it helps.

  Kind regards

  Dhirendra

• Is there a way to read the settings in a .pst file?

  Hi all!

  I looked everywhere for info on this and found nothing. Anyone know how to read the settings contained in a .pst file? I found some that I really like, but would like to know what they are doing. In other words, what are the different used FX and what are their settings? I would use some other users have created as a starting point to create my own channels of FX. Open in a text editor doesn't show something like:

  @^@^@D^@^A^A^@^@^@^@^KEMAGPPST^@^@^A^H^@^@^@^@Âp^@^@^@^@^@^@^@^@^@^@^@^@^@^@¿< 80 > ^ @^ @^ @^ @^ @^ @^ @^ @^ @^ @^ @^ @^ @^ @? < 80 > ^ @^ @@ ^ @^ @^ @

  Is there a way to show somehow what they do and what they use the settings?

  Thank you!

  You're right, the settings file contain only of the code when opened in a text editor.

  But why don't you just open settings in a project, this way of seeing exactly what Plugins are loaded. Opening of the plug-in window will show you their parameters.

  The only restriction is that GarageBand has only a limited view of Plugin window which can not show all settings. To do this you must open in Logic Pro X.

  Hope that helps

  Edgar Rothermich - LogicProGEM.com

  (Author of "Graphically improved manuals")

  http://DingDingMusic.com/manuals/

  "I could receive some form of compensation, financial or otherwise, my recommendation or link."

• Since an incompetent technician clear my settings from mozilla, I get up to a page of useless information about the sender and want to know how to avoid this

  Since an incompetent technician clear my settings from mozilla, I get up to a page of useless information about the sender and want to know how to prevent it. I can't copy / paste an example, but there are things like x-vipre scanned. x-uidl, x-account key. These things print when I make a copy paper, waste of paper and ink.

  The menu bar, select View-Headers-Normal

  No menu bar? Press the ALT key.

• USB port from a digital Multiport card will not read the external SSD drive. Right USB - c for the USB adapter works fine.

  USB port from a digital Multiport card will not read the external SSD drive. Right USB - c for the USB adapter works fine.

  It's a new 12 '' MacBook

• Read VeriStand channel from inside the custom device that are not part of the custom device?

  Is it possible to read VeriStand channels from within a custom device VeriStand (RT Driver) that are not part of this custom device?

  For example, suppose I want to be able to configure a channel in my custom device to always be twice the value of a string of material that my user selects (I know, better/more simple ways to do this, but this is just a simple example ).  Can I do this from the device custom without programmatically create a mapping of the system? (I've done this before and it is messy and VERY prone to error of the user).

  Thank you!

  good point

  the channel ID (U64s) are not the same in the engine config of vs. Instead, you must set 'references to dependent item' in the config and then get these references in the engine.

  See the source jarrod linked, which makes it

• How to read the text from a DOS window in real time?

  I call an executable file that downloads a file to flash memory.  This program displays status information in real time as the percentage of completion in one window BACK.   It also makes account of the CRC of the file as it downloads.  I am currently redirect the output of the DOS window in a text log file.  This works fine for obtaining of the CRC when the file is actually downloading but the operator loses the visibility of the State in the percentage of download.  Is there a way to read text information in a DOS window with my request of LabWindows/CVI real-time?

  Hi Brent,

  If redirect you the output from the first application in a log file, you would be able to read the contents of the file streaming to your second request, and whenever the content changes (such as the download value percentage), couldn't display you this information immediately with the second request in one window DOS or some other GUI?

  Luis

• Can LabWindows libraries call function inherited from read the Datalog file?

  We are currently updating some old software written in LabVIEW 6.0.3 to Java. One of the features of the original software is to create data files using the function "Write Datalog" and also remind these databases later using 'Read Datalog'.  To maintain backward compatibility with old data users, we want that new software to also be able to read and display the old datalogs.  I have read several posts here about how the only way to get data off datalogs uses the function 'Reading Datalog' of the same version of LabVIEW to write the paper in the first place. I have the original LabVIEW code so I don't know the structure of the data that has been written.

  I want to know if there is the same function in LabWindows libraries.  Specifically is there is no support for a 6.0.3% version of the function of reading Datalog to support interfacing with a call to java?

  To knock out a possible solution, this software is shared with clients.  We want to avoid the way of compiling an executable separated from LabVIEW to be distributed with the main Java software which batch processes all the old data files in reading them with the old function of LabVIEW and spitting out files in a new format.  We would prefer for the old files to be transparent open into the new software.

  WARNING: I use LabVIEW for dark days before the invention of the button cancel, but never touched LabWindows/CVI. Please enter slowly so I will understand

  Thank you all!

  I guess that is not a built-in library capable of reading files datalog LabVIEW simply because they do not have a fixed format... Even in LV, you will need to pass the data structure for the opening function in order to be able to read the data back.

  Searching the forum I found this discussion that can give you useful to begin with.

  Apparently, you need detect the beginning of the section of the data file after the initials "DTLG" and rest of the header (which is the part not documented). After this point, read the file should be simple if you know the data structure the program writer used. The data > storage section of LabVIEW help can give you information about the content of the memory of each type of data used.

  A simple test, I did write the clusters with a string and an integer shows that: 1. section of data begins at offset 0x22F; 2. the cluster is poured into the file preceded an int with the length of the string; 3. documents may have a variable length according to the length of the string; 4. There are no bytes of padding between elements of the cluster; 5. records are packed in the file consecutively.

  I did this test using LabVIEW2009: it is possible that older files of LV are structured differently.

  An alternative to this is to generate a DLL in LabVIEW that reads files datalog and passes their content to the appellant. Since you are experienced in LV, you are certainly more comfortable than me by doing this.

• How to read the data from a channel named in windows using labview

  Hello

  I need to read the channel named in windows data. The pipe is created by python by another application. This application post permanent data on the pipe. But I don't know how to read data using labview. is it possible to read the data from different application? If possible, how to start?

  Thanks in advance

  concerning

  RJ

  Hi Rolf,.

  It's just, because of driving is not initialized completely, pipe read returns error 42, I added 2 seconds late, then its work perfect.

  Thank you very much.

  Concerning

  RJ

• How to read the two columns of data from the Port series

  Hello

  I'm reading two columns of data from the serial port.

  Example:

  52439 52430

  52440 52437

  52209 52214

  51065 51070

  52206 52390

  I use the serial of Visa service and I can read the first column of data from the serial port, but I can't understand how to read the second column.

  I want to both sets of chart data.

  I enclose my VI.

  Thank you for your help.

  The analysis of string function takes a "Format string" on top (with the right button of the function and choose Help, which explains all the entries).  In particular, you can say 'Give me two numbers separated by a tab' and the output will be two numbers (whole or floating, depending on the chosen format).  In particular, %d\t%d specifies a decimal integer, , whole decimal.

• Remove the read-only attribute from all files in a folder

  How to remove the read-only attribute from all files in a folder. I tried to use the properties and used the attrib command, but all I see is when I right click on the folder, selecting Properties, it shows once again

  

  I followed the forums, but I'm really confused. Can someone help me with this. Thanks in advance

  I would like to start by finding which file is read-only again. This is probably a file as well as a miniature file desktop.ini.  An easy way to find it is to go to the details view, turn on the column heading "Attributes" and search for all files with the attribute value "R":

  In this example, the key of SB file is read-only:

  

• How to read the 16 bytes directly from the Modbus?

  Hello

  I got problem about the modbus register.

  Means I have call serial No. Which is given the address of 5000 and series not is 16 bytes and each has high and low-bit bytes.

  When I call using Modbus, so I can read the only first two bytes of address 5000 (4 bits) can you guide me please how I can read my serial No. bytes. Directly using modbus.

  Maybe I'm not good enough explanation so here I have attached a diagram that redbox right side indicate serial no.which I gave.

  LHS it not show the address of the register and the 12594 value is decimal maybe and then 16 bytes bytes.each has high and low bits.

  I want to make Vi the help that I can see my # of series directly on the front.

  right now I can only see 12594 value I want, I want to no.which series, I gave side pic HHR.

  Can you please guide me how I can do...

  also, I enclose example vi that I got from forum of NOR.

  Thank you in advance...

  It's basic Boolean math.

  Read the byte.  If you want to determine the value of a particular bit, you AND another value.  For bit 0 AND it with 1 for bit 1 AND 2.  ANDing with 128 will give you the value of bit 7 (bit 8 and higher).  If the result is 0, then the bit is set to false.  If the result is > 0, then the bit is true.

  Even easier is to take the number and convert it into a boolean number table function Boolean Array in the palette of the Boolean.  Then, you can index the particular Boolean you want from the table.

• Cannot delete files from 0 KB Word 2003 "cannot read the source file or disk.

  Original title: how remove the files from Word 2003 0 Kb which can not be read - file cleaner empty and an empty folder solvent do not work - "cannot read the source file or disc!

  I have a number of Word 2003 files that I'm unable to delete, since the message "Source file can not be read"appears when I try to delete.
  I have tried vacuum cleaner and Remover empty folder, also delete - file but cannot delete what cannot be recognized. Can anyone help please? Must be an easy way to do what I forgot, because I can't send files that contain some of these bulk files in my backup hard drive, the process stops when it reaches the 0 kb file!

  Hello

  1. where are the files located?
  2. are you able to open this file?

  This can happen if the file is used by some programs / demand or is corrupt.

  Follow these steps:

  Method 1: Check if you are able to delete the files in safe mode.
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/boot_failsafe.mspx?mfr=true

  Method 2: Ownership of files and check if you are able to delete.
   http://support.Microsoft.com/kb/308421