ReadyNASOS 6.5.0 (RC2) shows UPS warning after Installation

After installing 6.5.0 (RC2), I get a warning from the UPS device status.

I've never had this with the previous version.

Is there something I need to do to clear this warning?

Installed 6.5.0 RC3 and the UPS is detected again, as before.

Thank you for the fix in.

Tags: Netgear

Similar Questions

  • MacBook boot, shows flashing folder after 1 minute

    I recently bought a MacBook A1181 2007 model, and it does not start.

    When I press the power button, I get a white screen, and I hear noise from Apple as well as the CD player starts, make a little noise. Initially, the HARD drive makes a terrible noise, but I replaced it, thinking that would like to fix the no start problem, but it didn't. There is no more noise. After about 1 minute on the white screen, I get a folder flashing with an exclamation mark. If I press "C" key, it will show this folder, only does not blink.

    I pressed 'option' when you start trying to get to the recovery screen, and right, which shows a cursor after a few seconds and nothing else. I tried just about every combination of keys that I read on, and none of them work.

    I tried to remove the memory modules, and there is no difference. With or installed, the computer not turn on, instead the white power light illuminated and no more.

    I need a recovery disc or something? How can I get the laptop to boot?

    Your MacBook is trying to find OS X, however, is not able to find it.

    Try recovery mode to repair the HARD drive.

    On OS X Recovery - Apple Support

    http://www.idownloadblog.com/2016/02/24/how-to-start-Mac-recovery-mode/

  • Checking update Java plug-in does not show latest version after update same

    Checking update Java plug-in does not show latest version after update same

    You exit and then restart your browser after Java update in order for the right version of Java to display the Plugin Check page. I felt it necessary to do so.

    See also:

    Other - you should check your Plugins and update as needed.

  • Windows Vista Service Pack 1 was a success; However she was showing as unavailable after you restart the computer.

    * Original title: Vista 32-bit SP1

    I have vista and tried to install sp1 again it has been a success, but is always appear as a download available even after a reboot. Help! Just try to update to IE9.

    Hello

    Thanks for posting your query in the Microsoft Community Forums.

    According to the description of the problem, it seems that Windows Vista Service Pack 1 was successful; However she was showing as unavailable after you restart the computer.

    I will certainly help you with this issue.

    This problem may occur if one of the following conditions is true:

    a. a program on your computer interfered with the installation of the service pack.

    b. There is an inconsistency in the store of Windows services. The store Windows maintenance is a required component to install service packs.

    Here are a few articles that you can consult in order to solve the problem.

    How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues 

    How to obtain the latest Windows Vista service pack 

    Microsoft Windows Vista Service Pack 1 (SP1) frequently asked questions 

    Solve the problems when you can't install Internet Explorer 9

    If the problem persists, or you have questions about Windows, do not hesitate to let us know. We will be happy to help you.

  • Police shows only correctly on the first run after installation

    I have a really weird problem where my custom font is displayed correctly on the first run of my application after installation in the Simulator or device. Subsequent executions of the application, display the fields with the default system font.

    The service I use is this:

    public static Font GetCustomFont(boolean bold, int size)
{
    Font myFont = null;

    if (FontManager.getInstance().load("customfont.ttf", "custom", FontManager.APPLICATION_FONT) ==FontManager.SUCCESS)
    {
        try
        {
            FontFamily typeface = FontFamily.forName("custom");
            if (bold) myFont = typeface.getFont(Font.BOLD, size);
            else myFont = typeface.getFont(Font.ITALIC, size);
        }
        catch (Exception e)
        { e.printStackTrace(); }
    }
    return myFont;
}

    and the font is used as follows:

    LabelField myLabel = new LabelField("TESTING CUSTOM FONT");
myLabel.setFont(GetCustomFont(false, 24));
add(myLabel);

    The police show up nicely the first time I run the application. Even though I call System.exit (0), then restart the application, it is up to the top with the system font. My policy is a TTF 46KO file, which is added to the res folder of my project and I develop for BB 7.0.0.

    Can someone please help?

    You should check the return code of

    FontManager.getInstance () .load (...)

    You agree that SUCCESS, I think that you will find in the following executions that return code is something like 'Already loaded' and so you can use it in this circumstance too.

  • Given that the upgrade to Windows 8 my PC turns off without warning after an hour or so.

    Given that the upgrade to Windows 8 my PC turns off without warning after an hour or so. Any ideas?

    My PC is an Asus
    3 GHz Celeron Prosessor
    2 GB of ram

    Hello Kenneth g. Mann

    What version of Windows 8 you have installed on your computer?

    The only thing I can think of that would cause the computer shut down every 2 hours would be if you have the Windows 8 Preview of consumers or the Windows 8 Preview version. These two operating systems were copies of the assessments only and were set to expire on 15 January and 16 January.

    Click the link here , which deals with these issues.

    If you have previews of Windows 8 evaluation, please answer and provide your version of the operating system and any error if set.

    Thank you

    Marilyn

  • LR4 RC2 is necessary after installation of the LR 4.1?

    LR4 RC2 is necessary after installation of the LR 4.1?

    N ° on a Windows system it will have been replaced by installing 4.1, but I'm not sure on Mac systems.

  • No show next page after successful update

    I have a page with 2 forms, an update and one to insert it. Update, I have the insert behavior show next page after insertion, but the insert that is happening, but the next page does not appear. I have repeatedly validated the insert occurs. Any ideas on how I can understand why DW does not display the next page I mentioned it in the server behavior? If MySQL returns code is not 'OK', even if the insertion was successful?

    OS x 10.4.10 on MacTel, PHP, MySQL 5.0.41, DW CS3

    Cub, looks like I found the culprit here, although I have NO idea why this has caused the problem. Initially, I've always had the code session_start() at the top of the page. I manually add to every page that uses session variables because I don't see any way to have the DW insert this code when you create a page. I moved this code below and it worked fine. Can someone enlighten my ignorance here? I would like to learn from the mistake instead of trying to continue to get lucky.


    <>
    If (! isset {})
    session_start();
    }
    ?>
    <>

  • Firefox12 shows no warning when closing multiple tabs

    Although I check "warn me when closing multiple tabs", Firefox fails to notify me when I open them and close them anyway. I checked the Boolean parameters "topic: config ' and they are set to 'true '. How can this be repaired? This is a drawback of having no warning.

    browser.showQuitWarning

    browser.warnOnQuit

    browser.tabs.warnOnClose

    browser.tabs.warnOnQuit

    change all the above true about: config and check again, the last one (browser.tabs.warnOnQuit), you must create it with Ctrl-click > select new > Boolean > enter browser.tabs.warnOnQuit as the preference name > click OK
    > select true > click OK.

    Thank you

    Please check 'Resolved' the answer really solve the problem, to help others with a similar problem.

  • Device Manager shows yellow warning signs, portable devices

    Dell inspiron 546 windows Home premium 7, Norton 360 detected after that I run diagnostic report - error in device (yellow triangle) Manager [in devices and printers, I notice a warning next E F, G:\, H:\ Portable device. View the status of device Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19). When I click on solve problems, windows can't find any problems. When I put the USB into the slot, I flash drive: (J). so, my drive (Cruzer) works, it turns into letter (J) and CD (i) U3 system, CD RW drive letter: D
    I don't see the removable E, F, G, H storage devices. Is this a problem? I see them when I install it, say a card reader?
    Help, please

    Thank you very much! This uninstallation / reinstallation disk check, etc., was absolutely useless!
    Windows 7 has a research program and drop the toolbar, you go to start and where you have all programs, just underneath, there is a (located on the bottom left corner) a search toolbar - if you go and you type on the search tool bar just a Word, peripheral, Windows offers choice , among them was a command "find and fix problems with devices. When you click on it, Windows search problems. He found one by one, he fixed, H:\errors, G:\, E F.  That's all!

  • The Recycle Bin icon shows not empty after I have empty the tray

    * Original title: office wastebasket

    I empty the trash, but trash icon shows empty afterwards.

    Hi Yvonne husen,.

    Thanks for posting in the Microsoft Community forum. I'm sorry to hear that the Recycle Bin icon showed not empty once you empty the tray.

    I imagine the inconvenience that you are experiencing. I will definitely help you with this.

     

    I suggest that you run the Fixit tool that is available in the following article from Microsoft and check if it helps.

    The Recycle Bin icon does not automatically update in Windows Vista or Windows XP

    http://support.Microsoft.com/kb/968873

    Registry warning

    To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

    322756 (http://support.microsoft.com/kb/322756/)

    How to back up and restore the registry in Windows

    If the problem persists, feel free to let us know. It is our pleasure to be of service.

  • Update of security KB2446708 from 04/12/2011 still shows after installation

    I called support after that update kb 2446708 for cadre4 Net 12/04/11 said that it has been installed but would show again after updates or will disconnect on my laptop Dell Inspiron 1545 which has Windows 7 Home Premium and also on my Compaq Presario SR 5610F, which has Windows Vista with all service packs. After checking with other friends that they had the same problem, I called 4/19 and addressed to a Mr. Susruth who did a number of things still using the cleaning tool fx dotnt like going in the registry setting that it & he said he would send an email telling me he did, then I could do the same thing for my office. Of course that e-mail never happened. After I checked the support site (cannot find it now though) and there was a procedure which included the tool, but does not cover the other number of things he did. Well after that I started to run into a number of problems, so I called the tech service & which resulted after running an analysis of Vipre rescue who showed some issues fixed. But it has been determined that what he did I have to do a complete reinstallation of the operating system Windows 7. Spoke to a Mr RAM yesterday 5/3 help with my desktop computer with Vista & service packs that has NetFramework4 on this & said he installed with success but still appears & it did not really too refuse to use the cleaning tool. The end result is just, he was told to hide but does not tell me how. But if I have a number of people met this problem shouldn't seem a fix? If a response should not be come easily conclude that I can't find the forum topic or more until I DO?

    Is the caps lock on the keyboard from the system, Warren? ;)

    There are 2 ways to determine if a program or application, or the web site requires the installation of .NET Framework 4 in order to make it work:

    (1) when one installs program or application, you should be warned that the .NET Framework 4 must be or is being installed. Key word being should.

    (2) when an installed program/application or web site informs you that it has the .NET Framework 4 installed so that the software or site to work properly.

    Microsoft .NET Framework 4 (standalone installer)

  • PowerEdge 2900 showing predicted failure after disk replacement

    Hello

    I posted this same message in the forum of the disk drives, then I realized there's a specific forum for disks hard server so I'm copying here.

    We have a Poweredge 2900 with HDs 2x500Gb on RAID-1. One of the drives has failed and we replaced it with an identical disk that works very well (same brand, model number Seagate, etc.), but without a Dell PN.

    After replacement, the controller began to rebuild the RAID, but it shows "predicted failure = Yes" for this new album. The disc is currently still under reconstruction.

    One thing to notice is that apparently the Perc firmware is outdated. OpenManage shows that the current Perc 6 / i firmware version is 6.0.2 - 0002, and the minimum required version of the firmware is 6.2.0 - 0012. If I go to the Dell support site and enter a label for the Server service, it shows me a download available for the Perc firmware with version 6.3.3 - 0002.

    The questions are:

    -Is generally allowed to use not Dell certified readers if they are of the same brand and model as the other disk?

    -How would I determine the source for the warning of predicted failure?

    -It would have something to do with obsolete Perc firmware? Are there risks associated with Perc firmware upgrade?

    Thank you very much in advance for your help!

    --
    Julio.

    Update for our fans to the forum thread. Original poster concluded that used replacement drive was indeed bad. He is later replaced by a good drive and will update the server accordingly.

  • A fact error 4014 showing each time after all the steps

    One of my friends has an iPhone 5 s and he lowered his 10 9.3.5 iOS iOS iPhone it started and inquired "side update" to the rest of the new software update points, but suddenly her iPhone off and does not turn, does not yet show the Apple Logo. I tried to restore it with the new version of the iOS 10.0.2, I file the software theipsw and then restoring the iPhone, iTunes showed me the message "waiting for iPhone" and ultimately showed me a message by this sentence "iPhone" his name' siphons ' could not be restored.» An unknown error occurred (4014).

    I checked the list of steps that Apple suggests their, but nothing happened then, always showing me the same error number. What should I do?

    Thank you for your help and appreciate it.

    I found the solution. Just type here for others with the same problem to solve their problems.

    While the "iTunes with cable" sign is showing and in your computer, showing you "Waiting for iPhone" and things occur, you should restart your iPhone (hold sleep/wake low and low home together for a few seconds) implemented after this attempt to restore your iPhone again you should recover your iPhone software.

    Thank you for your support and more.

  • IPod Classic 160g shows no music after synchronization.

    I tried reformatting and restoring. Sometimes I can get a few albums will appear on the ipod, mainly purchased itunes music. Almost none of my CD from my library will not work. It's maybe a hard disk problem. I just want to have some opinion or if someone could have the same question. It started after making the mistake of syncing with itunes after the last update. Forgive me for wanting to add new music. Here are my stats hard drive...

    Retracts: 9

    Reallocation: 16376

    Sectors pending: 0

    PowerOn hours: 143

    Start/stop: 47707

    Temp: current 29

    Temp: Min 5 c

    Temp: Max 56 c

    Do not know your stats, but it is not specifically a drive problem hard if your iTunes Store purchased songs to the iPod and your CD songs imported synchronization are not.  iTunes doesn't care of the original source when it syncs the songs.

    Do you use the method to Manage manual (drag and drop songs on iPod in iTunes) or Auto Sync (setting synchronization music )?  You get an error message after synchronization?

    Find one of the songs that will not sync to your iTunes library.  Make a right click on it and read the information.  Tab Info to file window, browse to the location.  It shows a file path to its location on your disk, or does it mean something else there, like iCloud.  Depending on the configuration of your iTunes, it is possible for you to access your songs streaming from Apple servers ("iCloud").  But to synchronize the songs on your iPod, your files must be stored locally on your disk.

    If this isn't the problem and/or your iPod hard drive is defective, you can consider to replace flash storage, in the form of widely available card compact flash or a card SDXC, on an adapter.  The 5th generation and later "classic" iPods, this website contains relevant information.

    https://www.iFlash.xyz/

Maybe you are looking for