Real Application Clusters configuration

Similar Questions

• ORA-00439: feature not enabled: Real Application Clusters

  Hi friends,
  I installed Oracle 10 g server on my PC without RAC configuration. To enable archiving only after a command, I have published.
  
  "Alter system set Cluster_Database = True Scope = spfile"
  
  It was working well but when I tried to start the database by using connect as sysdba and "statup" command it gives following error.
  
  "ORA-00439: feature not enabled no: Real Application Clusters.
  
  Please help me on this issue.

  CLUSTER_DATABASE parameter is not bound to the Archives of the newspapers (assuming that's what you mean by 'activate archiving'). So I don't know why you set this in the first place.

  Given that the CAR is not installed and CLUSTER_DATABASE required by CARS, the error you are getting is not surprising. You'll want to change the parameter to false.

  Justin

• EBS on Real Application Clusters running

  Is there than a practice paper for the establishment of EBS on CARS?
  
  Thank you

  Hello

  Please refer to these docs.

  Oracle E-Business Suite and Oracle Real Application Clusters Documentation Roadmap [ID 745759.1]
  Oracle E-Business Suite Release 11i high availability Documentation Roadmap [ID 1072807.1]
  Oracle E - Business Suite Release 12 high availability Documentation Roadmap [ID 1072636.1]

  Thank you
  Hussein

• Data Guard & Real Application Clusters

  Hello, I have a problem with my configuration of data protection. I'm setting up data guard in a RAC
  but I don'n know configured how do it again by sending to the standby database.
  I would like to than all the documentation on the subject.
  Thank you.

  Here are some links:

  http://www.Oracle.com/technology/deploy/availability/PDF/MAA_WP_10g_RACPrimaryRACPhysicalStandby.PDF
  http://www.Oracle.com/technology/deploy/availability/PDF/MAA_WP_10g_RACPrimarySingleInstancePhysicalStandby.PDF

  And of course, there is the Manual:

  http://download.Oracle.com/docs/CD/E11882_01/server.112/e10700/TOC.htm

  See Chapter 3 and annexes D and F.

  Larry

• Differences between Oracle Real Application Clusters 11 g 1 material and GR 11, 2

  Hi Experts,

  Please give me the differences between RAC Oracle 11 GR 1 material and GR 11, 2.

  Thanks in advance,

  Kalashnikoff.

  From GR 11 1 11 GR 2 material, there is not much on the side of the data base which is different with respect to Oracle RAC. Which means that anything like that again for a server Oracle 11 g RAC 2 is too new for an Oracle 11 GR one-time 2 server.

  On the side of the grid Infrastructure, the biggest difference is the introduction of the listener SCAN.

  See you soon,.

  Brian

• Oracle Real Application Testing

  I capture a 10.2.0.5 RAC workload and try to play again on a RAC 11.2.0.3. All the Docs describe going from a stand-alone node RAC and all steps to do. However, I can't find anything describing the JAR to the CARS process.
  
  Any help would be appreciated.
  Thank you

  user12006502 wrote:
  I capture a 10.2.0.5 RAC workload and try to play again on a RAC 11.2.0.3. All the Docs describe going from a stand-alone node RAC and all steps to do. However, I can't find anything describing the JAR to the CARS process.

  Any help would be appreciated.
  Thank you

  It's there, you just need to look around for it (and probably do some reading).

  Things like
  http://docs.Oracle.com/CD/E11882_01/server.112/e16540/dbr_capture.htm#CACICAAC
  "
  Capture the workload that only one can be carried out at any time. If you have an Oracle Real Application Clusters (Oracle RAC) configuration, workload capture is performed for all of the database. To allow a clean state before you begin to capture the workload, all instances must be restarted.
  "

  and

  http://docs.Oracle.com/CD/E11882_01/server.112/e16540/dbr_replay.htm#CHDBCADJ
  "
  For Oracle Real Application Clusters (Oracle RAC) databases, you can map all the connection strings to a load balancer connection string. This is particularly useful if the number of nodes on the Replay system is different from the capture system. Alternatively, if you want to run the workload to specific instances, you can use the services or explicitly specify the instance identifier in remapped connection strings.
  "

  See you soon,.

• Application server configuration

  I'm putting in place the ATG app on my machine.

  I have installation 11.1 ATG with app server Weblogic 12.1.3.0. While the implementation of ICD I am error ' invalid Weblogic version: 12.1.3.0.0 taken in charge: [12.1.2] '

  Document is saying something like:

  When you install an application server, you can install a supported version and a version that is not supported by permit. Application server configurations are found at /atg/cim/productconfig/
appserver/SupportedApplicationServer.properties .
  

  [ Oracle ATG trade Web - Application Server Configuration]

  But I am not able to find the file of property mentioned in the record of the ATG.

  Could someone help me solve this problem?

  Thanking in anticipation.

  Hello

  The property file can be found in: CIM\lib\classes.jar\atg\cim\productconfig\appserver

  Please find the reference document for more information below and understand the best, hope that helps you.

  Problem installing Oracle trade 11.1 on Weblogic 12.1.3 (Doc ID 1922316.1)

  Please select a correct answer if this answer solves your problem.

  Thank you & best regards

  Suman Vernoux

• I can't seem to install indesign, get me the following message: no application is configured pour open URL, what to do? Thank you pour your help!

  I can't seem to install indesign, get me the following message: "no application is configured to open URL", what to do? Thank you pour your help!

  Please read https://forums.adobe.com/thread/1499014

  -try some steps such as changing browsers and disable your firewall

  -also clear the cache of your browser if you start with a fresh browser

  http://myleniumerrors.com/installation-and-licensing-problems/creative-cloud-error-codes-w ip.

  http://helpx.Adobe.com/creative-cloud/KB/failed-install-creative-cloud-desktop.html

• make an exception in jdev 11.1.2.3.0 after the application security configuration

  Hello
  
  Berfore my ADF Application security configuration works well. But after security configuration, I am getting the below error. Can someone help me to solve the issue. Here is the stack trace. BTW, the JDev I use is version 11.1.2.3.0.
  
  java.lang.NoClassDefFoundError: has not been initialized class com.bea.security.quark.ASIParserProxy
  at oracle.security.jps.az.internal.runtime.entitymanager.ExtensionsManagerImpl.init(ExtensionsManagerImpl.java:227)
  at oracle.security.jps.az.internal.runtime.policy.ApplicationPolicyImpl.initWithAppPolicyEntry(ApplicationPolicyImpl.java:322)
  at oracle.security.jps.az.internal.runtime.policy.ApplicationPolicyImpl.initAppPolicy(ApplicationPolicyImpl.java:274)
  at oracle.security.jps.az.internal.runtime.policy.ApplicationPolicyMap.get(ApplicationPolicyMap.java:110)
  at oracle.security.jps.az.internal.runtime.service.PDPServiceImpl.getApplicationPolicy(PDPServiceImpl.java:575)
  at oracle.security.jps.az.internal.runtime.service.PDPServiceImpl.getApplicationPolicy(PDPServiceImpl.java:556)
  at oracle.security.jps.internal.policystore.PolicyUtil.getGrantedAppRoles(PolicyUtil.java:2876)
  to oracle.security.jps.internal.jaas.JpsAbsSubjectResolver$ 5.run(JpsAbsSubjectResolver.java:497)
  to oracle.security.jps.internal.jaas.JpsAbsSubjectResolver$ 5.run(JpsAbsSubjectResolver.java:487)
  at java.security.AccessController.doPrivileged (Native Method)
  at oracle.security.jps.internal.jaas.JpsAbsSubjectResolver.getApplicationRoles(JpsAbsSubjectResolver.java:487)
  at oracle.security.jps.internal.jaas.JpsAbsSubjectResolver.createJpsSubject(JpsAbsSubjectResolver.java:334)
  at oracle.security.jps.internal.jaas.JpsAbsSubjectResolver.getAnonymousSubject(JpsAbsSubjectResolver.java:319)
  at oracle.security.jps.internal.jaas.JpsAbsSubjectResolver.resolveJpsSubject(JpsAbsSubjectResolver.java:258)
  at oracle.security.jps.internal.jaas.JpsAbsSubjectResolver.resolveSubject(JpsAbsSubjectResolver.java:214)
  at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:161)
  at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
  at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:139)
  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
  at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
  to weblogic.servlet.internal.WebAppServletContext$ ServletInvocationAction.wrapRun (WebAppServletContext.java:3715)
  to weblogic.servlet.internal.WebAppServletContext$ ServletInvocationAction.run (WebAppServletContext.java:3681)
  at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
  at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
  at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277)
  at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
  at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
  at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
  at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
  Thank you / Vinet.

  Hello

  Finally the problem is resolved. Actual cause is, there is a space in the name of the folder in which the jdev is installed. I installed the jdev in a different directory (no spaces in the directory name) and has defined the variable env JDEV_USER_HOME and everything worked fine.

  It is an odd question. Sorry for the confusion.

  I thank all of you for your time.

  Best regards
  VINET.

• Real Application testing from 10g to 11g

  Is it possible to do the real application testing of database 10 g to 11g database? How can do us?

  I had little trouble. You can capture the workload also in 10.2.0.3. Please follow the link.

  http://www.Oracle.com/technetwork/database/manageability/MetaLink-real-application-testing-f-132358.PDF

• HFM Application Cluster Configuration - failed

  Hello
  
  I use the EPM 11.1.1.3 System. The Oracle database version is 10g. When I tried to reconfigure HFM Application cluster via the EMP Configurator, I get error below. I just added the name of the HFM server to the cluster and click Next. Please could you help on this issue.
  
  Error Msg in the log file:
  The server name duplicated SERVERNAME line: 1062 file:.\CHFMConfig.cpp error code: 0 x 0 error: the operation completed successfully.
  The user has been properly set up DCOM limitations
  Try to configure the cluster server.
  Cannot set the application servers and Clusters. Line: 515 file:.\CHFMConfigUtil.cpp Error code: 0x8004082a error: #1578 IDispatch error
  General error. Line: 827 file:.\CHFMConfigUtil.cpp Error code: 0 x 80040815 error: error IDispatch #1557
  
  Thank you
  Michel K

  I removed the name of server in doubles in the HFM_Config.xml file and solved the problem.

  Thank you

• 1042 for real-time PXI configuration

  I bought

  PXI-1042

  8187 controller

  a module for capturing data.

  I want to configure the purposes such real-time pxi,

  so should what steps I follow?

  Thank you

  Abbas

  With success, I put the ip address of the PXI-8187 controller in chassis 1042.

  now does not restore the IP 0.0.0.0

  What I did:

  Once the network is built, go to

  1 MAX > remote to the pc host, right click on and select format.

  2. change the IP as you want

  3 reboot, now your ip address will stick to our ip is entered.

  another sequence of installtion

  1 - first of all, I installed Labview 7

  2. then Labview real-time module 7

  3. then DAQmx 7

  now, when I try to install the software from remote > remove from , I do not see the LVRT7 in the list to download to the target.

• Problem with db/server connection in a cluster on the WebLogic application server configuration

  Hi all,

  Maybe someone here has already encountered this problem. I want to deploy and run my application on a cluster (with 2 servers) on WebLogic configuration. All data sources appear to be configured correctly, the application is deployed correctly and that it works correctly, except when a sql query is taken to a specific java class (DataGridService) that handles the results grid search.

  It displays the following error:

  MDatagrid: query: select * xxxxxx WHERE (xxxx) {'success': false, 'id': messageType '',' ': "ERROR", "messageFunction": "Sql Error", 'messageDescription' ': 'java.lang.ClassCastException: weblogic.jdbc.rmi.SerialConnection_weblogic_jdbc_rmi_internal_ConnectionImpl_weblogic_jdbc_wrapper_JTAConnection_weblogic_jdbc_wrapper_XAConnection_oracle_jdbc_driver_LogicalConnection_1211_WLStub cannot be cast to oracle.jdbc.OracleConnection',' iconMessage":"Ext.MessageBox.ERROR","buttonMessage":"Ext.MessageBox.OK","msgTitle":"System Error!"}

  As I said, all sources of data in the console of wl appear to be correctly configured with the option "Not packaged data items of Type" not selected. All other connection db work correctly but there is a problem only with this particular class and with the cluster configuration, in fact it works correctly on a stitching configuration. In this case, the same problem occurs if 'Objects of Type data not packaged' is selected.

  Maybe there is a problem with a certain configuration of wl. Can someone help us?

  We have just solved the problem: in the properties file, wls.context parameter, we forgot to insert the ip for all servers in the cluster

  for example, cluster with 2 servers

  bad: wls.context=t3://ip-address:7001 (this is the only server admin)

  correct: wls.context=t3://ip address: 7001,ip address: 7002,ip address: 7003 (admin server, Server1 Server2)

• scenario test Oracle real application cluster

  Hi all! I just finished real oracle application implemented for the customer. Now, I need to UAT to them with cases. Some of the cases I don't know if he can make the cluster fail, or need to repair, or sunk. I need to tell them what happens if something go wrong in the following cases:
  
  case 1. the storage database server connection is down in a node, or all nodes of the cluster.
  
  case 2. Private SqlConnection connection down
  
  case 3. public network down into another node or all nodes of the cluster.
  
  Please, help to resolve the situation and behavior of oracle rac, or suggest me a useful document about this case.
  
  I'll appreciate your help.
  
  Thank you

  Hello

  I hope this helps...
  >

  Kind regards

• Categories, the application and configuration settings not migrate in the exported XML file

  We have exported our FDM of an environment and it application another via XML file imported. We have experienced several issues highlighted on the link below. In addition, the control of 'Catégories' table is not migrated at all and there seems to be no option to import or export step on the control panels. In addition, I find that many other parameters have not been migrated, such as:
  -Administration | Configuration settings | Allows a custom period description
  -Administration | Application settings | Batch charger
  -Administration | Application settings | Format of Date key time mask
  -Etc etc
  
  Please can anyone suggest why they have not migrated successfully? It's quite frustrating because at the present time, we have to recreate settings manually in the following environment and the control panel. Y at - it a potential bug here? We use FDM version 11.1.2.1.
  
  -2147418105-error automation on FDM application via XML file import
  
  Published by: Jubei on June 12, 2012 16:20

  You import the adapter. These tables are specific adapter and that may be your problem.