Real Application testing from 10g to 11g

Similar Questions

• Impossible to upgrade the schedular schema from 10g to 11g

  Hello
  
  Im doing an upgrade of the schema S_NQ_SCHED from 10g to 11g, its failure to upgrade, while the review, he throws the error in the log below:
  
  
  [2012-03-16 T 12: 09:21.363 + 02:00] [BIPLATFORM] [ERROR] [update. BIPLATFORM] UPGCMP-05001: table 10 g S_NQ_SCHED. S_NQ_JOB. Oracle.IAS.mrua.plugin.BI.DBTable@6a493b65 does not use the default columns.   He can't be updated[2012-03 - 16 T 12: 09:21.363 + 02:00] [FrameworkMR] [ERROR] [UPGAST-01008] [update. FrameworkMR] review of the scheme has failed for Oracle's BI platform.
  [2012-03-16 T 12: 09:21.363 + 02:00] [FrameworkMR] [ERROR] [update. FrameworkMR] Cause: upgrade framework determined that the review of upgrade phase failed for the named component. This is often due to a the prerequisite check failed. No patterns changes have been made to the component that failed. Action: Check the log files upgrade for the cause of the message. Fix the source of the problem if possible and start the exam. Do not have to perform a real upgrade upgrade all components unless mode to succeed during the review.
  [2012-03-16 T 12: 09:21.363 + 02:00] [FrameworkMR] [NOTIFICATION] [update. Failure_total M_upgradeMode 1 FrameworkMR] N
  [2012-03-16 T 12: 09:21.363 + 02:00] [FrameworkMR] [NOTIFICATION] [update. Failure_total M_upgradeMode 1 FrameworkMR] N
  [2012-03-16 T 12: 09:21.363 + 02:00] [FrameworkMR] [ERROR] [UPGAST-01015] [update. Specific software components FrameworkMR modules] some update of the repository report the failure.
  [2012-03-16 T 12: 09:21.363 + 02:00] [FrameworkMR] [ERROR] [update. Cause FrameworkMR]: one or several modules specific to software components returned a status of error during upgrade from the repository. A few other components could be upgraded successfully. Action: Review upgrade logs to determine which components have failed and locate the source of the errors for each component. Correct the conditions that caused the errors. It may be possible to restart the upgrade.
  [2012-03-16 T 12: 09:21.379 + 02:00] (Framework) [NOTIFICATION] [update. Finishing frame] examination of the components.
  
  
  
  Kind regards
  KK

  KK,

  When we install OBIEE 11 g, we run a repository creation utility (RCU) creates two schema called schema of metadata (MDS) and BIPLATFORM.
  The planner of all associated tables were created in the BIPLATFORM schema.
  If Enterprise Manager (EM) takes these patterns automatically and executes BI 11 g Planner services.
  Connect with the BIPLATFORM schema in the data source. Here we can see the Scheduler tables S_NQ_JOB, S_NQ_INSTANCE, S_NQ_JOB_PARAM, S_NQ_ERR_MSG which are born already when we ran RCU related

  For more information,.

  http://allaboutobiee.blogspot.in/2012/03/creating-agent-in-OBIEE-11g.html

  Thank you
  Oldia...

• Scheduler quartz 1.6 does not work after migration application Java of 10g and 11g

  I used the Task Scheduler quartz 1.6 with Java application built in technology from 10g to Oracle using Jdeveloper 10 g as IDE.

  The application works fine with the mentioned technology. But after the migration of the application of technology 11g quartz scheduler does not work anymore. The Weblogic Server allows you to deploy this technology migrated is Weblogic server 10.3

  Finally, the issue is resolved.

  The problem is resolved after you delete the following jar files in my view-controller project: Api .jar-Trinity and the Trinity - impl.jar

• Oracle Real Application Testing

  I capture a 10.2.0.5 RAC workload and try to play again on a RAC 11.2.0.3. All the Docs describe going from a stand-alone node RAC and all steps to do. However, I can't find anything describing the JAR to the CARS process.
  
  Any help would be appreciated.
  Thank you

  user12006502 wrote:
  I capture a 10.2.0.5 RAC workload and try to play again on a RAC 11.2.0.3. All the Docs describe going from a stand-alone node RAC and all steps to do. However, I can't find anything describing the JAR to the CARS process.

  Any help would be appreciated.
  Thank you

  It's there, you just need to look around for it (and probably do some reading).

  Things like
  http://docs.Oracle.com/CD/E11882_01/server.112/e16540/dbr_capture.htm#CACICAAC
  "
  Capture the workload that only one can be carried out at any time. If you have an Oracle Real Application Clusters (Oracle RAC) configuration, workload capture is performed for all of the database. To allow a clean state before you begin to capture the workload, all instances must be restarted.
  "

  and

  http://docs.Oracle.com/CD/E11882_01/server.112/e16540/dbr_replay.htm#CHDBCADJ
  "
  For Oracle Real Application Clusters (Oracle RAC) databases, you can map all the connection strings to a load balancer connection string. This is particularly useful if the number of nodes on the Replay system is different from the capture system. Alternatively, if you want to run the workload to specific instances, you can use the services or explicitly specify the instance identifier in remapped connection strings.
  "

  See you soon,.

• update from 10g to 11g xe xe

  Hello world
  I'm upgrading to 10g to 11g xe xe traying.
  Oracle 10g XE is installed before on my C:\
  I want to install 11 g xe even directory.

  To export the data from 10.2 XE database, perform the following steps:
  
  Connect to 10.2 XE database as SYS user.
  
  Create a dump folder dump_folder on the local file system.
  
  Create directory object DUMP_DIR with READ and WRITE privilege to SYSTEM user.
  
  SQL> CREATE DIRECTORY DUMP_DIR AS '/<dump_folder>';
  SQL>GRANT read, write ON DIRECTORY DUMP_DIR TO system;
  Export data from 10.2 XE database to the dump folder.
  
  expdp system/system_password full=Y 
   EXCLUDE=SCHEMA:\"LIKE \'APEX_%\'\",SCHEMA:\"LIKE \'FLOWS_%\'\" 
   directory=DUMP_DIR dumpfile=DB10G.dmp logfile=expdpDB10G.log
  expdp system/system_password 
   TABLES=FLOWS_FILES.WWV_FLOW_FILE_OBJECTS$ directory=DUMP_DIR 
   dumpfile=DB10G2.dmp logfile=expdpDB10G2.log

  When I get to the step
  

  ORA-39002: invalid operation
  ORA-39070: Unable to open the log file.
  ORA-29283: invalid file operation
  ORA-06512: at "SYS.UTL_FILE", line 475
  ORA-29283: invalid file operation
  
  
  
  SQL>

  Published by: esra aktas on 06:54 18.Nis.2011

  ESRA aktas wrote:
  I haven't installed the new database 11g xe still...
  Should I install 11g xe first?

  Oops. You have changed the first post :)

  So, you see the error when you export.

  Are you sure that oracle can access your DUMP_DIR (the folder created for the export of landfills)?

• Real application testing

  Hello!
  
  Is it possible to reread in oracle 10G, the workload on the same version 10G
  I'm usung 10.2.0.5
  
  Thank you and best regards,
  Pavel

  Pavel wrote:
  Hello!

  Is it possible to reread in oracle 10G, the workload on the same version 10G
  I'm usung 10.2.0.5

  Pavel,

  The answer to this would be a step becaue the RAT tool, is it only 11.1 from. So you can replay the workload of another host running at 11.1 and change, you would use a box of test running with 10 g. I don't think that any group of patches makes this tool available in the version back who is there for a newer version, as in your case 11.1.

  HTH
  Aman...

• Apex from 10g to 11g Guide

  Hello
  I have an apex application that resides on Oracle 10 g. You're heading 11g and you need to move this app. What is the best way to do this:
  1 wouldn't be a good idea to save the 10 g and restore it to 11 g?
  Tool apex 2-use to move the app to 11g?
  
  Thank you

  I will seek to update your installation of APEX at least 4.0 x very soon. 4.1 with a host of new features is coming, unless you have a burning reason to remain in 3.2...

  Thank you

  Tony Miller
  Webster, TX

  Time passes fast like the wind, but the flies from fruits such as bananas.

  If you answer this question, please mark the thread as closed and give points where won...

• tutorial for migrating an application JHeadstart. 10g to 11g ADF

  Hi, is there a tutorial on migrating a 10g ADF application developed using JHeadstart application of ADF 11 g which also supports JHeadstart.
  
  Only found this [http://www.oracle.com/technology/products/jdev/collateral/migration.html] which is not related to the JHeadstart.
  
  Thank you.

  It is documented in the notes.

  Steven Davelaar,
  JHeadstart team.

• Upgrade to ebs r12 dbtier from 10g to 11g note.

  Hi all
  
  I'm looking for a note of oracle put dbTier 10 g to 11 g. EBS r12.
  
  Thanks in advance.

  Hello

  Please refer to:

  Note: 735276.1 - interoperability Notes E-Business Suite R12 with Oracle Database 11 GR 1 (11.1.0) material
  Note: 782224.1 - interoperability Notes Oracle E-Business Suite Release 12 with 11 GR 1 material (11.1.0.6)

  Oracle Database 11 GR 1 material (11.1.0.6) certified with E-Business Suite Release 12
  http://blogs.Oracle.com/stevenChan/2008/09/oracle_db_11gr1_11106_certified_with_ebs12.html

  If you have upgraded to R12 (12.1.1) and always on 10 gr 2 or you want to patch 11g for the last group of patches, refer to:

  Note: 802875,1, interoperability Notes for Oracle E-Business Suite release 12.1 with Oracle Database 11g Release 1 (11.1.0)

  I suggest that you add (Note: 380482.1 - Oracle E-Business Suite Release 12 battery bitumeuses Documentation) to your list of favorites, it contains all the necessary documents, you should consult.

  Kind regards
  Hussein

• Upgrade to DB 10g and 11g

  Hi guys,.
  
  Current version: 10.2.0.5
  Target Version: 11.2.x.x
  
  I intend to improve my DB from 10g to 11g.
  Before the actual upgrade, I can create a test 11 g environment.
  
  I've read a few articles and understand the following concepts
  1 create a set of tuning in current 10 g to capture plan and the performance of the sql execution statistics
  2 export the setting of 10 g and 11 g SQL import base
  3 export all data to 10 g and 11 g
  4 to 11 g database, consider whether there is a best execution plan and accept
  
  For my scenario here, my test 11g environment is not all applications server conneecting to it.
  For my 11g generate other plans, the sql should be run at least once in 11g. As there could be a number of SQLs captured in the tuning set, how I run everything manually (via sql * more) because I did not have a request to call him?
  
  In fact, my main goal here is to compare the execution between 10g and 11g plan. Already from 9i and 10 g, I have actually generate version manually sql execution plan and compare manually.
  
  
  
  Thank you

  Have you thought about Oracle Real Application Testing - http://www.oracle.com/technetwork/database/focus-areas/manageability/rat-option-11gr2-datasheet-128580.pdf

  Lordane Iotzov

• CONNECT BY QUERY returns different number of Clotilde in 10g or 11g databases

  People,
  
  I put just a problem of bellows in our databases.
  
  1.) 10 g database:
  

  Connected to:
  Oracle Database 10g Enterprise Edition Release 10.1.0.5.0 - Production
  With the Partitioning, OLAP and Data Mining options
  
  SQL> select * from global_name;
  
  SQL> SELECT ROWNUM 
    2    FROM   dual
    3  CONNECT BY ROWNUM <= 2;
  
      ROWNUM
  ----------
           1
           2
           3
  
  SQL> 

  2 Database 11 g

  Connected to:
  Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - Production
  With the Partitioning, OLAP, Data Mining and Real Application Testing options
  
  SQL> select * from global_name;
  
  
  SQL> SELECT ROWNUM 
    2    FROM   dual
    3    CONNECT BY ROWNUM <= 2;
  
      ROWNUM
  ----------
           1
           2
  
  SQL> 

  As you can see in 10g above query returns 3 records in 11 g only 2.
  Why is it like that? It's sort of adjustable, to produce the same result?
  
  Thank you very much
  Tomas

  Hello

  If you have access to metalink, see no bug no 6031397.
  It is fixed in version 10.2

• Web Service security settings of 10g and 11g Migration

  We will migrate a complete Application of the ADF from 10g to 11g. We got all this work, but the web services. It seems that we learned the work of web services, but the security settings for the web service are very different and I have difficulties to make them work.

  For example, we have a customer's web service that has a X 509 certificate for authentication. We use the WSS 1.0 safety and I chose in the Configuration of the customer strategy: "oracle/wss10_x509_token_with_message_protection_client_policy and in 'Select credentials', I use https identification information."

  However, I get the following error when I try to use the web service pointing to the customer: Note: I also detached the client and deleted the credentials and get a SIMILAR error.

  < javax.xml.ws.soap.SOAPFaultException: WS-Security treat failure: FAULT CODE: InvalidSecurity MESSAGE of ERROR: header missing WS Security in the SOAP message >

  < to com.sun.xml.ws.fault.SOAP11Fault.getProtocolException(SOAP11Fault.java:197) >

  < to com.sun.xml.ws.fault.SOAPFaultBuilder.createException(SOAPFaultBuilder.java:122) >

  < to com.sun.xml.ws.client.sei.SyncMethodHandler.invoke(SyncMethodHandler.java:125) >

  < to com.sun.xml.ws.client.sei.SyncMethodHandler.invoke(SyncMethodHandler.java:95) >

  < to com.sun.xml.ws.client.sei.SEIStub.invoke(SEIStub.java:136) >

  So any that I have attached a customer or have not a joint, I get the same error. An idea that I am wrong?

  Thank you

  Okay, figured it out. I had to use ClientConstants to set the web strategy and set the OWSM political Director to use the appropriate strategy.

  The ClientConstants code is:

  SecurityPoliciesFeature = securityFeatures

  New SecurityPoliciesFeature (new String() {"oracle/wss10_x509_token"});

  In InboundOutbound_Service = new InboundOutbound_Service();

  InboundOutbound svc = in.getInboundOutboundPort (securityFeatures);

  String urlLn = this.getURL ('url');

  BindingProvider bp = svc (BindingProvider);

  Card reqContext = bp.getRequestContext ();

  reqContext.put (BindingProvider.ENDPOINT_ADDRESS_PROPERTY, urlLn);

  reqContext.put (ClientConstants.WSSEC_KEYSTORE_TYPE, "JKS");

  reqContext.put (ClientConstants.WSSEC_KEYSTORE_LOCATION, "web.jks");

  reqContext.put (ClientConstants.WSSEC_KEYSTORE_PASSWORD, "pw");

  reqContext.put (ClientConstants.WSSEC_ENC_KEY_ALIAS, "keyalias");

  reqContext.put (ClientConstants.WSSEC_ENC_KEY_PASSWORD, "pw");

  reqContext.put (ClientConstants.WSSEC_SIG_KEY_ALIAS, "keyalias");

  reqContext.put (ClientConstants.WSSEC_SIG_KEY_PASSWORD, "pw");

  reqContext.put (ClientConstants.WSSEC_RECIPIENT_KEY_ALIAS, "serveralias");

  Here is a picture of link at all that I found useful:

  https://blogs.Oracle.com/OWSM/entry/owsm_concepts_11g

  http://docs.Oracle.com/CD/E21764_01/Web.1111/b32511/setup_config.htm#BABJHIBI

  Using Oracle Web Service security policies

  Review of the architecture of Oracle WSM in Oracle Fusion Middleware

• I can't see model excel after upgrade editor bi of 10g and 11g

  Hi all

  We have improved Bi Publisher reports from 10g to 11g. Reports looks good with RTF out put. Reports are displayed with Excel out put.

  If I click EDIt of excel layout, that nothing is displayed. If I can't model properties is available.

  My question is

  RTF works well why EXCEl does not work?

  can I download 10 GB excel and I can download in 11 g?

  should I open excel 10 and 11 g and copy and paste out put?

  is there properties I should correct?

  Please help me. for your understanding I'm downloading a few screenshots. (see attachment)

  Thanks in advance for your time and support.

  I solved this problem.

  I downloaded excel 10g, then downloaded page layout in the report of 11g. It works very well.

• Migration 10g and 11g - Variables does not later

  If someone could give me some suggestions that would be great.
  
  My client has just migrated from 10g to 11g and aside from a few problems with the modules of knowledge Hyperion, which we managed to solve, we met one of the main problems we have not yet resolved, and we are not able to find something about this on the forums / Articles.
  
  The problem is that the variables used in the script do not hold their values after the migration.
  This is for variables position and refreshment. If you refresh, the scenario looks to be pleasantly refreshing value, but this value is not used in interfaces that need to use it.
  
  Where (re) generate the scenario, the problem has disappeared, but since we have different versions of scenario in Dev and Prod, just team all scenarios is not the preferred solution.
  
  Could there be some missing link (s) between the tables in the repo work, which contains the metadata for the scenario and the variable metadata?
  
  All suggestions are welcome!
  
  See you soon,.
  RO

  Hi Rudyo,

  It seems that an update of the repository is necessary. The setting of variables seems to be wrong. Referential ODI11g in the table snp_scen_step a column is added: var_long_value.

  It seems that during the migration, the original field (var_value) is not moved to the new var_long_value field.

  Copy the contents of the old column to the new column will solve the problem.

  Update snp_scen_step set var_long_value = var_value where var_long_value is null.
  commit;

  Kind regards
  Martijn

• With the help of 10g to 11g repository

  Hello
  can I use bi repository admin from 10g to 11g admin bi in another computer?
  and I which file should I copy to my computer so it can work...? THX

  For webcatalogs upgradation.
  You must copy your records webcatalogs and deliveries in a single directory.
  give the path of webcatalogs to the catalog directory, then it automatically selects folder deliveries as the path for the directory of the catalogue of deliveries.