Real as for again time doubt REALITY apply to the Dataguard

Similar Questions

• ThBird: after running for some time on Mac, I noticed the loss of contact, the highest use of resources...

  Hi, first post so excuse despises.
  On Mac OS X 10.6.8.
  When I start TB he moved to processor low use (0, 0-0, 1%) after the initial activity. There are some file access.
  After some use (cannot be precise if it could be as little as first check for mail, certainly with 20 minutes) the process uses 5.5% or more at any time when TB is 'inactive' as far as I'm concerned. There is a flow of constant IO even though many are stat or similar rather than full read/write.

  Also, several times I found the most much of my contacts are not available (even my own account acting) Although some are.
  It disappears if I restart TB.
  Haven't checked but suspect that these may be contacts in my contacts OSX/phone etc. Did not time check which is common to accounts that remain - suspect they would be accumulated addresses in TB files.

  Also, I was amazed how many fonts are opened by the CT (guessing almost everyone, I opened, several 100) which seems a strange thing to do if it is not really needed. I wonder if a file handle limit results in the problem of contacts.

  I hope that this gives to encourage thoughts. I can do some searching, but the clock is ticking right now.

  (I lost the weeks pass to TB from Outlook when Virgin UK moved to gmail hosted in their own platform.) A lot of data migrated but TB helps rebuild a functional archiving messaging system.)

  cwinte said

  Just checked more closely and he are a 850 font files open and 100 or so files. It's probably a little crazy in terms of resources.

  It's weird. But he has been so on Mac for many years. Maybe even in version 2. I have not yet tracked when put obtained behavior implemented.

  The behavior is noticed in Firefox bug https://bugzilla.mozilla.org/show_bug.cgi?id=701661 and bug https://bugzilla.mozilla.org/show_bug.cgi?id=800279 Thunderbird

• If I use my system for some time (say 15 minutes) and the system automatically disconnects I want to open it as administrator

  Saving a system using win + L or an automatic log out after awhile and then to connect it will open in the same account that she used last time. I still want to ask an administrator password before returning inside the system.

  Uzair,

  The short answer is - you can't do what you want to do.

  Deletion of all accounts & just running things an Admin account will make it easier for horses Trojans enter your system - see Why use a standard account instead of an administrator account?  [you can also see this information in the help file of the computer management window].

  You should then be in using a Standard account for daily activities & keeping a password protected administrator account just for authorising facilities, etc.  This, judging from your description seems to be exactly what you are doing.

  I should also mention something else I want to give you half a story.  Make a second password protected administrator account.  From any account may suffer from corruption of the user profiles to use, your current Admin account could one day be the account who suffers from this corruption of the user profiles.  Having another Admin account as a reserve protects you against this possibility - it could then enter the system using the second Admin to fix things.  You should also make a password reset disk for each account on the computer.

  All the best,

• Time Machine wants to finish the backup

  I recently had a repair on my MacBook Pro.  They replaced the Logic Board 2.5 GHz.  Time Machine now wants to do a full backup instead of only since my last backup.  Should I just let a backup completes or is there a way to backup only since the last of them?  Will allowing him to make a full backup take too much space on my external hard drive?  The drive is fairly new and I know that there is enough space (for now.)  Apple advice for troubleshooting time Machine said to call the repair center, but I thought someone here might be able to help.  Thank you.

  This is quite normal. Time Machine it's an another computer because the new logic board. So, you have to make a new backup. If you have no space on the backup drive, then erase the disc first.

• Newspaper archive database pending apply to the production server.

  Dear all,
  
  How to apply for standby database archive log apply to the production server.
  
  Please help me.
  
  Thank you
  Manas

  Follow the steps of permutation.

  http://taliphakanozturken.WordPress.com/2011/10/28/physical-standby-database-switchover-failover-operations/

  Talip Hakan Öztürk
  http://taliphakanozturken.WordPress.com/

• remove the pop up message "Waiting for in time real (target CompactRIO RT) to answer.

  Is there a way to remove the pop-up message "Waiting for in time real (target CompactRIO RT) to answer" what power is removed the cRIO or when the network cable is disconnected?

  Hey Danny,

  How did send you the commands to the Windows PC the cRIO? You use the remote FPGA host Interface?

  I've seen the pop-up dialog box when the LabVIEW project is not present.

  If you create a Windows VI that sends orders via shared variables or other network mechanism to a VI RT, which in turn controls your FPGA VI, then you should not ever see the popup you speak.

  This tutorial walks through creating an example of monitoring on cRIO with three screws as indicated:

  http://zone.NI.com/DevZone/CDA/tut/p/ID/11199#toc4

  This tutorial is an example of the use of a shared variable to implement a heartbeat, to determine if the cRIO is connected:

  http://decibel.NI.com/content/docs/doc-11046

  I hope this helps.

• When I connect to XP, if I'm not actively something for a few minutes I logoff and will have to retype my connection again. How can I change the time that remains active?

  When I first log on to windows xp if I'm not actively something minutes I logoff and must re-enter my ögon again. How can I change the length of time that it remains active?

  You can find in Control Panel

• dad bought me a computer PORTABLE from NUTRIGEST I HAVE BEEN out of the CITY FOR SOME TIME AND LATER BETWEEN the AUTHENTICITY CODE PRODUCT, AND IT's not SAYIING VALID, BUT I KNOW THAT CANT BE REAL CODE IS

  dad bought me a computer PORTABLE from NUTRIGEST I HAVE BEEN out of the CITY FOR SOME TIME AND LATER BETWEEN the AUTHENTICITY CODE PRODUCT, AND IT's not SAYIING VALID, BUT I KNOW THAT can NOT BE TRUE

  If it is a new machine call or go to circuit city and get them fixed.  If they sold you the laptop, indicating that it included Windows XP then the onus is on them that provide you a valid COA and the product key.

  John

• MSCOBJCL.sql runs for a long time everything by applying the patch 6678700 for 12.1.1 upgrade

  DB: 11.2.0.3.0

  OS: IBM AIX 64 bit 6.1 power system

  Hi all

  MSCOBJCL.sql runs for time while using a patch 6678700 12.1.1 put level. We are the upgrade of 11.5.10.2.0 to 12.1.1

  Could someone please share why the script takes so long to run?

  Thanks for your time

  Best regards, a1_win

  Thanks Asif

• Google Calendar becomes inactive in Firefox. Reset Firefox solves the problem for some time (sometimes minutes), then it becomes inactive.

  Google Calendar becomes inactive in Firefox. Can not navigate, cannot change the appointments, can only view an appointment, then freezes and nothing is more possible.
  Reset Firefox solves the problem for some time (sometimes minutes), then it becomes inactive.
  Firefox 28.0, Windows 7.
  Google Calendar is OK in Android and syncs with my PC OK.
  Works fine in Internet Explorer.
  Please notify.

  The extension Freeven pro is probably the problem. Only that disable and check again.

  If you have the same problem after having disabled the extension pro Freeven then, disable graphics hardware acceleration.

  You will have to perhaps restart Firefox for it to take effect, so save any work first (e.g. you compose mail, documents online that you are editing, etc.).

  Then perform the following steps:

  • Click on the orange top left Firefox button, then select the 'Options' button, or, if there is no Firefox button at the top, go to tools > Options.
  • In the Firefox options window, click the Advanced tab, and then select 'General '.
  • You will find in the list of parameters, the checkbox use hardware acceleration when available . Clear this check box.
  • Now restart Firefox and see if the problems persist.

  In addition, please check the updates for your graphics driver by following the steps in the following knowledge base articles:

  • Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox
  • Update your graphics drivers to use hardware acceleration and WebGL

  In safe mode hardware, acceleration is disable by default.

  Thank you.

• Firefox 3.6.3 will not play integrated youtube videos. It comes up with ' year error occurred please try again later. " It happens all the time

  Firefox 3.6.3 will not play integrated youtube videos. It comes up with ' year error occurred please try again later. " It happens all the time. If you click to go to youtube the clip plays.

  This has happened

  Each time Firefox opened

  Well, here's my answer to my own post.

  After reading some posts here about possible solutions, I tried to delete all the cookies for YouTube (Tools > options > privacy > show cookies > youtube.com). Then tested on a site with integrated video would not play before and on YouTube directly - both worked!

  The poster with the suggestion of cookies also proposed changes to the 'exceptions', but it was not necessary at least for me.

• I have disabled my iPhone s4 because I type in my password PIN for several times how I unlock now?

  I have disabled my iPhone s4 because I type in my password PIN for several times how I unlock now?

  Follow the instructions in this article to support that best apply to your situation:

  iOS: device disabled

  Good luck

  GB

• FIFO in real-time instead of 'length of the graphic history.

  I was wondering how I can implement the following method with FIFO in real-time instead of 'length of the graphic history.

  

  Well Yes. It uses two FIFO read nodes. The first one reads the elements 0 and the output for the remaining element is wired to the number of items in the second node entry. Voila, check you what is in the FIFO and pull everything out of it.

• Case held (not gel) for some time

  So I got 2 analog input via NiMyrio and I got a deal of true/false because if the two signals larger than the trigger point as I put, it will enter in the case of true.

  The problem because both signals is put in correspondence with the comparison to very fast time, this means that the real case will happen after this date that is too fast. After that it will change to cuz case misstep signals of time corresponding to the comparison more.

  If the case don't give me enough time to fulfill the function inside the housing. (example I want number 5 decremented to number 1 in 5 sec but it could not be done because of the case will turn to false cases like the true case happening very quickly)

  There is nothing to do with signals, their charesteristics who behave so

  I wonder is anyway I can hold the case for time to complete the function inside as the true case happening too quickly according to the signal.

  "I tried" delay "and" wait until the next multiple. They can hold, but at the same time to freeze the program as well which is meaningless cuz she also only freeze function inside I want to perform.

  IN summary, I want to keep (no gel) the true case and don't function inside at the time of the operation, as described in the pictures

  Thanks for your help

  

  Here's what happens:

  -Once the case is entered, the delay time say you keep of 100ms

  -If the remaining part of the code runs at scenario1:50ms and scenario2: 150ms

  -In scenario 1: because of the delay, the case held for 100 ms-50ms = 50ms

  -In scenario 2, the code moves after completing its code.

  -Until the delay time provides is the case will take minimum of 100 ms.

  -Timer is just pointer to the clock and during this time also code runs.

• I have a valid license for Windows XP key code, so why the system tells me it is not currently active or real?

  Windows has no

  I had to spend my PC this morning. Moving it, I decided to implement a new network card. When I reconnected it all the cables, I plugged my USB mouse on another USB port where it had been plugged in before. The computer is more than 7 years old and I've never had a problem with the front Windows Validation. I have a valid license for Windows XP key code, so why the system tells me it is not currently active or real?

  When Windows checks to see if you have moved your copy of Windows to "another computer", among other things, that his focus on the identification of several strands of material in the computer to see if they are different than when Windows was first installed.  I do not remember the list for now, but I remember that the network card is one of the pieces - and IIRC it is 'valuable' higher than others to reach the conclusion.

  You probably other elements has changed over the past seven years and now Windows has decided to have a "new" computer  Assuming that you haven't changed the motherboard - if you had, you would have had this issue at the time wherever you did--your installation is still legal.  Reactivate using your original license key. It should work online, but you will need to call the number that appears in the error message from re - validate.