Real problems of Yosemite VMWare Windows 7

Similar Questions

• Solution of problems with the vmware window

  Using VMWare Workstation 7.0.1 and windows xp SP3 professional home, the resolution of the screen always changes to adapt to the vmware window. I especially run it in full-screen, exclusive mode, but sometimes I have to go to restored state. When I do, the vmware window must shrink to fit on my screen (which it doesn't) and the resolution of the virtual machine running is currently expected to remain the same for he puts just scroll bars on the edges. What is happening is that the resolution always goes down to 800 x 600 bottom of 1440 x 900 and its really annoying. Mostly because all the desktop icons move upward in the upper left corner when I change the resolution back to the larger size.

  I'm sure it's a problem in vmware itself because I tried to uninstall vmware tools of virtual pc and with that was the graphics card driver. Surprisingly, when I rebooted the virtual pc, it installed most of the pilots who were going with vmware tools except for the screen and it goes not smaller when I'm out of the mode full-screen. After that, I reinstalled tools and he did the same thing again. I'm pretty sure I should keep vmware tools, so I don't want to leave just UN-installed.

  Are there specific parameters associated with the change in resolution to fit the window? Ive looked around and ive seen settings do not really match what I want.

  AutoFit window resizes the window to match the guest.

  AutoFit Guest resizes the guest to match the window.

  (This is explained in the preferences > display page.)

  If both are true, we will resize the window when the customer changes his resolution internally, but we will resize the comments when you explicitly resize the window of VMware Workstation.

• the application could not start because the configuration of the incorrect application of reinstallation of the application can solve the problem by Insalling Vmware tools so that windows server 2003

  the application could not start because the configuration of the incorrect application of reinstallation of the application can solve the problem by Insalling Vmware tools so that windows server 2003. PFA

  Ranjana,

  Please, review the vminst.log file located in % TEMP and see if we could see related errors.  Otherwise follow the troubleshooting steps below;

  1. check that the guest operating system that you want to install VMware Tools is fully certified.

  2. check that the correct guest operating system is selected

  3. check that the good ISO image is loaded. For more information, see ensuring good ISO image VMware tools is loaded (1003910).

  4. check that the VMware Tools ISO image has not been damaged. For more information, see determine if your VMware Tools ISO image is damaged on a host ESX/ESXi (1004820).

  5. If you are installing a Windows operating system, make sure that you do not encounter problems with your Windows registry database. For more information about the resolution of the problems of register with VMware Tools, see Impossible to upgrade the existing VMware tools (1001354).

  6. If you install on a 64-bit Linux guest OS, make sure that there are no missing dependencies. For more information, see Tools from VMware install fails to start the daemon of guest OS on the operating systems 64-bit Linux with the glibc-common package 32-bit installed (1023185).

  If your problem persists, please refer to: KB VMware: VMware Tools installation problems that are defective in a guest operating system or contact support.

  ~ dGeorgey

• Pavilion DV9008NR BIOS problem 8 32-bit Windows

  I have a mobile Pavilion DV9008NR older:

  RAM - 2 GB RAM

  CPU - Athlon Turion 64 x 2 TL-50 1.6 GHz

  Motherboard - Quanta 30B 9

  Chipset - NVIDIA GeForce 6150

  Southbridge - NVIDIA NForce 410/430 MCP

  BIOS HP F.43 22/03/2010

  -GPU of NVIDIA GeForce Go 6150 (UMA) (MS Bsic Disply C52 A.2 adapter graphics card

  This has been previously loaded with WinXP SP3 with nLite slipstreamed 1.42 to load SATA drivers.  He was previously the BIOS flashed to F.43 (latest version).

  He was 'clean' updated with Windows 8 Pro Upgrade after passing all the tests.

  After reboot, I got the standard HP/Phoenix BIOS screen with the usual guests for BIOS Setup and boot order.

  Every time after that, the guests disappeared and Win8 charge * fast * as usual.

  Feature to win 8 seems to be in good condition, and necessary Ricoh 5-in-1 and drivers NVIDIA coprocesser loading without difficulty.

  I went back to my old image of WinXP and loaded several times BIOS normally with and invites you.

  After reloading Win8, back to problems of any invites after the first reboot.

  Try or during the BIOS support is * not * enter you the BIOS or boot order Setup.

  It seems that somewhere Win8 is "anticipate" normal "flow" of the BIOS.

  I understand that Win8 has a feature to take control to prevent the takeover of boot sector malware.

  Is this what is happening?  (Which becomes a real problem with and may be necessary).

  Is this a bug in the BIOS, or

  Is there something else.

  Thank you ~.

  Just talked to the MS Support for something different and wondered about it.

  Obviously, on some machines, this is * normal * and is the result of the function "Secure Boot.

  The answer is... you need to use the 'restart' instead of 'Shut Down' to prepare the system to give the menu .

• find the real problem between memory and processor or beween food and virus!

  Hello

  In addition to the pieptones how you can know if the problem is with CPU or memory, how you can distinguish the problem if there is a real problem whith one of this material in two?

  just to know I took off the memory of my laptop and I saw the screen went black, I did the same thing with the processor, and it had the same sign as the dark memory screen.

  so my question is,

  1. How do I know when this two material is damaged one who is the origin of the problem whitout having any reserve memory by me? is there any tool material memory Tester?

  2. sometimes computer restarts every few minutes when there a supply or virus problem, how you can distinguish the problem if it is based on the power supply or a virus by the desktop computer whitout having any multimeter by you, is there a tool like a pen that you can measure the power supply of power or the volt?

  all good advise from the experience is welkom

  Thank you

  Johan

  If it's a failure of defective material, sometimes, you will get the BIOS beeps that can give clues to what's wrong - http://www.pchell.com/hardware/beepcodes.shtml

  There are testers of memory around like - http://windows.microsoft.com/en-US/windows7/Diagnosing-memory-problems-on-your-computer or see http://pcsupport.about.com/od/toolsofthetrade/tp/memorytest.htm

  defects of power supply - search the net for articles like http://www.techrepublic.com/article/learn-to-troubleshoot-power-supply-problems/ (there are many other tips) BUT PAY Attention when messing around with the power supply. Obvious care to avoid damage to the PC or worse, damaging yourself!

  viruses - there are many scanners available as http://www.malwarebytes.org/ if malware your PC is stable enough to run them. If your PC does not start there are scanners bootable, you can download it from a certain AV companies, you can start your PC and then from the scanner.

  NOTE: If you download software, download from a site deemed safe and always fully AV check on a system that works before you install or run - just to be sure.

• What support VMware Windows 7 as a guest host and Windows Server 2003 as the operating system operating system?

  People,

  Hello.

  Because my laptop is preinstalled Windows 7 and cannot dual boot multiple operating systems. I need to install VMware in Windows 7 host and then install Windows Server 2003 as a guest operating system.

  I installed VMware Server 2.0.2 in Windows 7 and Windows Server 2003 operating system as a guest host. Everything works fine for a while. But VMware Server Home Page https://mylaptop:8333 / IU cannot display more.

  I found that Windows 7 is not a host for VMware Server 2 and strange operating system might happen at any time. I found that 'VMware Player 3' is fully supported in Windows 7 as host operating system but is not taken in charge of Windows Server 2003 as a guest operating system.

  People knows what product VMware Windows 7 support as host operating system and Windows Server 2003 as the operating system prompted?

  Thanks in advance

  Hello

  IMHO, I think that Workstation is the vmware product just for you, the requirements

  It supports Windows 7 as a facilitator and Windows 2003 as a host with no problems. You can be confident about it at 100%.

  Best wishes / Saludos.

  Pablo

  Please consider providing any useful answer. Thank you!! - Por favor considered premiar las useful responses. MUCHAS gracias!

  Virtually noob blog

• Problemas com Rede - VMWare Server 2.0.2

  Estou com um problema great. Ocorre com todas as minhas maquinas

  tolls. Use a VMWare Server 2.0.2 atualizei back versão

  that o problema resolveria mas continued ocorrendo.

  APOs

  some tempo em execução a rede simplesmente Plaça loses a conexao

  pingar para, to EU acts e reativar volta, to EU access as

  of voltar e alterar Propriedades para a mesma option anterior, e can

  Sair volta a pingar e volta o status of rede usually. Have any

  training of o driver driver of Rede da placa virtual? O ESXi pode

  resolver? A logging ESXi e paga OU gratuita?

  Guga, is o seu laptop roda Windows 7 e sober ele você instalou VMware Server, then o pode ser o seu problema este: o VMware Server e suportado sober o Windows 7 ainda nao. Veja Manual o produto, pag. 25.

  Como alternativa, VMware Workstation ja mourned o Windows 7 o, e bem but funcionalidade excellence. But a front a VMware passed a suportar o Windows 7 no also VMware Server, como mas ele e free, nao tem a prioridade.

  VMS Made in Brazil

  PS: Please consider dar pontos has este or any poster caso seja util lhe outro.

• Problem installing iTunes on Windows 10

  I get an error message on the installation in the installation of iTunes to Apple Application Support. Specifically, the text reads:

  ""Microsoft.VC80.CRT, type = "win32", version = "8.0.50727.6195", publicKeyToken = "1fc8b 3b9a1e18e3b", processorArchitecture = "amd64" '. '. See Help and Support for more information. ' HRESULT: 0 X 80073715.

  In addition once iTunes is installed and I try to open it it wont let me.

  The message "an error occurred during the installation of assembly ' Microsoft.VC80.CRT, type ="win32", version ="8.0.50727.6195", publicKeyToken ="1fc8b3b9a1e18e3b", processorArchitecture is...» "may occur because a particular library file is not included in the supplied with iTunes distribution package or will not be installed because some unspecified reason. Install Microsoft Visual C++ 2005 Service Pack 1 Redistributable Package MFC security update before you attempt to reinstall iTunes can help.

  When to reinstall iTunes, right-click on the Setup and run as administrator.

  See troubleshoot problems with iTunes for Windows updates for more information if necessary.

  TT2

• Unfortunately I couldn't find another option in Firefox to describe the problem. I use Windows 7. Since the Firefox update (now I use 16.0.2) when I

  Unfortunately I couldn't find another option in Firefox to describe the problem.
  I use Windows 7.
  Since the Firefox update (now I use 16.0.2) when I use the Google Translator in Firefox, I can't copy and paste into Microsoft Word.
  But when I use it in Internet Explorer, I can't use the copy paste it to Microsoft word (MS Word 2010).
  my e-mail address: [email protected]

  Hello
  Thank you very much for quick help
  It's work with the instruction of Ctrl + C.
  perditer

• I have problems when I minimized windows and try to open a new window will open all minimized windows as well as the new window. He just changed when mozzilla updated. He has not done this before the update.

  I have problems when I minimized windows and try to open a new window will open all minimized windows as well as the new window. He just changed when mozzilla updated. He has not done this before the update. Before the update if I had minimized windows they would be reduced when I opened a new window. Need help please, I guess it's just a setting somewhere but I can not understand where is the parameter. Thank you jason

  http://about.ask.com/APN/toolbar/docs/default/FAQ/en/FF/index.html#Na4 is Ask FAQ on how to uninstall the toolbar.

• The Back button only allows me to return a page at a time instead of select a previous page from a drop-down list. It is a real problem: someone has any ideas?

  In the previous version of Firefox, I could go back to a previous page by clicking on a part of the previous button which brought up a list of recently visited sites and clicking on one of them, might go back to this page. This installation does not seem to be available in the latest Firefox, and the back button only goes back one page at a time. It's really embarrassing, like,

    it now takes longer to get to an earlier page
    there is no visibility of previous pages visited
    any actions carried out on webpages are undone when going back through them - this does not happen when jumping back several pages in one go.
  

  It is a real problem, I used the old system constantly and cannot continue to use Firefox 4.0 unless there is a way around it.

  Use it to open the history list:

  • Right-click on the back or next button
  • Press and hold the left button of the mouse on the active back or forward button until the list opens

  You can watch this extension:

  • Backward forward history Dropdown: https://addons.mozilla.org/firefox/addon/backforedrop/

• Having a weird problem with the new window. Download the old look of firefox with incorrect URL and messy appearance.

  I opened a new window in the main window of Firefox. The new window is nothing like on the main window of Firefox 4 Beta. And when I have tabs in a new window, the URL doesn't change. Infact, it changes nothing in the tabs. It remains that if I change it manually.

  I do not encounter this problem in the main window of Firefox. If I open a new window of hand. Why is this?

  Take a look at the screenshots I did.

  Main window
  New window

  You may also notice the tab I'm the and the URL is displayed in the image of the new window. You can see what I'm talking about here.

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the Add-ons is the cause of the problem (switch to the DEFAULT theme: Tools > Modules > themes).

  • Makes no changes on the start safe mode window.

  See:

  • Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox

  Create a new profile exclusively for version 4.0 beta and create a shortcut on the desktop with Pei 'profile' attached to the target to launch this profile.

  • http://KB.mozillazine.org/Testing_pre-release_versions
  • http://KB.mozillazine.org/Creating_a_new_Firefox_profile_on_Windows
  • http://KB.mozillazine.org/Shortcut_to_a_specific_profile
  • http://KB.mozillazine.org/Using_multiple_profiles_-_Firefox

• Not able to install Itunes for my pc windows7 (64 bit) im... Every time I have install I get the message "there is a PROBLEM WITH CE PACKAGE WINDOWS INSTALLER. A DLL REQUIRED FOR THIS FULL INSTALLATION COULD NOT BE EXECUTED. PLEASE CONTACT THE SUPPORT STA

  Not able to install Itunes for my pc windows7 (64 bit) im... Every time I have install I get the message "there is a PROBLEM WITH CE PACKAGE WINDOWS INSTALLER. A DLL REQUIRED FOR THIS FULL INSTALLATION COULD NOT BE EXECUTED. PLEASE CONTACT THE SUPPORT STAFF. "What should I do? I am new to Iphone! If you could help me on this, it would be very appreciated...

  aarruunn, you might want to try Windows Installer Cleanup utility.

  http://www.MajorGeeks.com/files/details/windows_installer_cleanup_utility.html

• Problems installing iTunes on Windows 10 12.3.1.23

  Hello

  I had this problem for two weeks, I don't know how to solve, and it would be good to have help.

  Two weeks ago, I noticed that after I had plugged my iPhone into my PC 5, only Windows Explorer recognized iTunes didn't.

  So I tried to see if there were updates for iTunes, but no update has been published.

  I used Windows 10 tools to uninstall it and then tried to install it again.

  Before that, I used CCleaner to make sure that no left, files or old registry key remained in Windows.

  Then I tried to install iTunes 12.3.1.23 by downloading from the Apple Web site and by opening the Setup program.

  Since then, every time, when I try to install iTunes, installation work until it says "Restore action", and a new mask appears, where it is written that there is a problem and that Setup could not install the software.

  After trying this for 3 - 4 times, I went to C:\Users\MYUSER\AppData\Local\Apple\Apple Software Update and tried to run all executable files in this folder, which contains installers for each program, Apple needs to install iTunes on PC separatelly, distinguished by the installation program downloaded by the Apple because one website you can download contains all the facilities of programs in a single installer.

  I managed to install all the software, with the exception of the Apple Mobile Device Support (version 9.1.0.6), who, as program controls when a unit Apple is plugged to the PC, and it has not worked since the beginning and is the one who made me do all this, in my view, is the same as the one send me problems during the installation of iTunes when I run the installation program downloaded by the Apple Web site.

  Anyone have the same problem and/or know how to fix this problem?

  I have 10 Home Windows (64-bit) version 1511.

  Thank you

  A

  SPECIFICATIONS OF THE PC:

  Name: HP Pavilion 15-P258NL

  OS: Windows Home (64-bit) version 1511 10

  CPU: Intel Core i7-5500U @ 2.40 GHz

  RAM: 16 GB DDR3

  GPU: NVIDIA GeForce 840 M with 4 GB of dedicated DDR3 memory

  FEATURES of the iPhone:

  Model: iPhone 5 s, black

  Capacity: 16 GB

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach. Review other cases and a list of documents to support further down the page, in which case one of them applies.

  More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.

  Your library must be affected by these measures but there are also links to the backup and recovery advice it should be necessary.

  In some cases with 64-bit systems, you may need to install the version of iTunes for Windows (64-bit-for older video cards) and QuickTime to enable iTunes work with some videos. 32-bit users must install QuickTime.

  TT2

• I have the same problem. whenever I start windows it tells me it is install and configure updates, after 20 minutes he finally - but next time I start exactly the same thing happens - that is every day and im tired of it.

  I have the same problem. whenever I boot windows vista it tells me it is install and configure updates, after 20 minutes he finally - but next time I start exactly the same thing happens - that is every day and im tired of it.

  Hi MartinWithWindowsIssues,

  Welcome to the Microsoft Vista answers Forum!

  I have some steps that may help you.

  Step 1

  Try resetting the component of windows update.

  To do this, click resolve this present in the link below. Click run in the file download dialog box and follow the steps described in the fix it Wizard.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Step 2

  Perform a scan of the file system [SFC] checker on the computer that will replace missing or corrupt files.

  To do this, follow the steps below:

  1. click on the Start button

  2. on the Start Menu, click all programs followed by accessories

  3. in the menu accessories, right-click on command line option

  4. in the drop-down menu that appears, click the "Run as Administrator" option

  5. If you have the User Account Control (UAC) enabled, you will be asked permission before the opening of the command line. You simply press the button continue if you are the administrator or insert password etc.

  6. in the command prompt window, type: sfc/scannow then press enter

  7. a message is displayed to indicate that "the analysis of the system will start.

  8. be patient because the analysis may take some time

  9. If all the files need replace SFC will replace them. You may be asked to insert your Vista DVD for this process to continue

  10. If all goes although you should, after the analysis, see the following message "Windows resource protection not found any breach of integrity.

  11. once the scan is finished, close the command prompt window, restart the computer and check.

  For more information, see the link below:

  How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista

  http://support.Microsoft.com/kb/936212

  Hope the helps of information. Please post back and we do know.

  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think