Realistic of the random movements of multiple MovieClips

Similar Questions

• 7344 PCI behave erratically, the random movements of servo

  I use a PCI-7344 to control a 3-axis test bench. Today when I booted with on all the settings it has not worked, just kept servos moving randomly, even when controlled by MAX and a script of movement. Even the kill command has failed. I checked for the disconnected wires, but nothing has moved since the last time I used the system.

  The servos for all axes acted weird. The current position, the target position and the following error message remained at zero, even though the engines were spinning. On an axis, the MAX software would show the current increase in position and values of random speed while the position of the target and following error message has remained at zero.

  Something went wrong and I don't know how to fix it this time. Does anyone have an idea what to do? Since I was put on this project, I never enjoyed working with NOR-MAX or the PCI-7344. It seems I have spend more time to use it for experiments in fixing it.

  It turns out that someone disconnected the cable used to power the PCI-7344. Once I plugged it back in it works well again.

• Random movement + draggable?

  And again, here's another question to me, haha. I develop an interactive game, and I meet quite a few hiccups due to my inexperience with Lingo and my lack of resources Director.

  So, let's say a sprite has the random movement and Rotation and Draggable behaviors attached to it.

  When I drag the sprite as it moves randomly, it does slide correctly. But when I drop, it jumps to the location where the behavior of random movement and Rotation would have it to when it updates, as if the behavior has been calculating and moves the location of the sprite in the background as I am dragging. I want to be able to drag the sprite while it moves randomly, drop it in place and have the random movement behavior start again in its new location.

  How would I change the original code to do this?

  Thanks much for any help you can provide. I really, really appreciate it - you have no idea.

  See the film 'http://nonlinear.openspark.com/tips/sprites/DraggableRandom.dir'.

  -What are you looking for?

• How to drag and drop multiple movieclips at the same time

  Hello world

  I'm a new actonscript 3 and adobe flash CC user and I am building an application but I have been stuck for several days. I have looked everywhere and tried everything I could think of, but I can't yet find a solution to my problem that I thought were pretty basic.

  Basically, let's say I have a rectangle and a circle on the stage. Once I did of the movieclips and assigned an instance name to each of them, I want to be able to perform a drag and drop the Rectangle so that both the rectangle and the circle become movable at the same time.

  For now, I have a mouse down events listener associated with the instance of rectangle, a method startDrag assigned to the rectangle instance and another assigned to the circle. But in this configuration, when I click on and drag the rectangle, only the circle is mobile (only the last line in the code is taken into account).

  I don't know if what I'm trying to achieve is feasible, but any help will be greatly appreciated, thank you!

  The startDrag() method can only work for one object at a time, so in your case the Treaty the last of them, designated the task.  This approach is to temporarily to plant the two objects in a container and then drag the container.

  rectangle.addEventListener (MouseEvent.MOUSE_DOWN, fl_ClickToDrag);  When I click on the rectangle

  var dragMC:MovieClip = new MovieClip();
  addChild (dragMC);

  function fl_ClickToDrag(event:MouseEvent):void

  {
  dragMC.addChild (rectangle);        move objects in the container
  dragMC.addChild (circle);
  dragMC.startDrag ();
  }

  stage.addEventListener (MouseEvent.MOUSE_UP, fl_ReleaseToDrop); When I release the mouse button

  function fl_ReleaseToDrop(event:MouseEvent):void

  {
  dragMC.stopDrag ();
  Rectangle.x += dragMC.x;         Adjust the positions of the objects to their new location
  Rectangle.y += dragMC.y;
  Circle.x += dragMC.x;
  Circle.y += dragMC.y
  addChild (rectangle);                 move back to the scene objects
  addChild (circle);
  dragMC.x = dragMC.y = 0;       reset the benchmark for the dragMC
  }

  All this stuff of repositioning in the Drop function is necessary because when you drag the container, the positions of the content are still on their original coordinates inside the container.  So when you drop them they will resume their x / y positions in their new parent, meaning they go back where they were.  Reposition them where they have been trained to take into account the change in the position of the dragMC.

• How to program a character with a movement messy scene, including the diagonal movement and Exchange sprites from all directions. (AS3).

  Please, someone help me.

  Did you expect a code within the main timeline? It is a code that should be put in the class of a document. Who is the most recommended method.

  To do this, create a new folder, fill it with the FLA file and create a new folder called 'classes', where you must have a class (.as) file. Call the "Main.as".

  
  

  Then open your FLA file and, without anything selected, open the Properties window. There is a text entry field that represents the class. Write "classes. Hand '. After that, open the window of the library, where you should have your 4 sprites. One of them right click and select Properties. A new window will appear where you must check the option button "export for ActionScript". In the field of text entry class write "classes. Sprite1 ". In my previous answer, I told you what should be the Sprite1, Sprite2, Sprite3 and Sprite4... Well, that's when you use this formula. In the second entry of text field (which I do not know how it is written in the English version of the program... perhaps Base class?), write "flash.display.Sprite" and finally click OK. Do the same thing with each of the other 3 Sprites.
  

  
  

  In the "Main.as" class file, paste this code:

  {classes package

  import flash.display.MovieClip;

  import flash.geom.Rectangle;

  import flash.display.Sprite;

  import flash.display.Graphics;

  import flash.utils.Timer;

  import flash.events.TimerEvent;

  SerializableAttribute public class Main extends MovieClip {}

  public var enemy: Sprite = new Sprite();

  public var _Sprite1: Sprite1 = new Sprite1();

  public var _Sprite2: Sprite2 = new Sprite2();

  public var _Sprite3: Sprite3 = new Sprite3();

  public var _Sprite4: Sprite4 = new Sprite4();

  public var sprite: Array = new Array (_Sprite1, _Sprite2, _Sprite3, _Sprite4);

  public var movements: Array = new Array ("Right", "Left", "Top" and "Down");

  public var EnemyInicialPosition: Array = new Array (100, 100); X, the values Y

  public var EnemySpeed:Number = 20;

  public var MovementsDelay:int = 500; Miliseconds

  public var: delay = new Timer (MovementsDelay);

  public void Main() {}

  CreateEnemy();

  RandomMovements();

  Delay.addEventListener (TimerEvent.TIMER, TimerFinished);

  Delay.Start ();

  }

  public void CreateEnemy() {}

  Enemy.x = EnemyInicialPosition [0];

  Enemy.y = EnemyInicialPosition [1];

  stage.addChild (Enemy);

  Enemy.addChild(Sprites[0]);

  for (var i: int = 1; i)< sprites.length;="" i++)="">

  The sprites [i] .visible = false;

  Enemy.addChild (Sprites [i]);

  }

  }

  public void RandomMovements() {}

  var IndexNumber:int = Math.floor (Math.random () * (Movements.length));

  var Direction: String = movements [numero_index];

  for (var i: int = 0; i)< sprites.length;="" i++)="">

  The sprites [i] .visible = false;

  }

  If (direction == 'Right') {}

  Enemy.x += EnemySpeed;

  Enemy.y += EnemySpeed;

  Sprites [numero_index] .visible = true;

  }

  If (direction == 'Left') {}

  Enemy.x = EnemySpeed;

  Enemy.y = EnemySpeed;

  Sprites [numero_index] .visible = true;

  }

  If (direction == 'Up') {}

  Enemy.x += EnemySpeed;

  Enemy.y = EnemySpeed;

  Sprites [numero_index] .visible = true;

  }

  If (direction == 'Down') {}

  Enemy.x = EnemySpeed;

  Enemy.y += EnemySpeed;

  Sprites [numero_index] .visible = true;

  }

  }

  private void TimerFinished (e:TimerEvent) {}

  RandomMovements();

  }

  }

  }

• Screen is scrolling down repeatedly and the cursor moves on its own.

  The cursor is rolling along of type I.m

  You do not give much information about what is really happening, but the first two points to check are the mouse and the keyboard, before looking for other hardware or software problems.

  If you have another mouse and keyboard available, you can try reverse the two and restart the computer to see if the problem persists.  If not a little more information would be needed before I could give advice on the best way to solve the problem.

  You're talking about the screen, scroll down and the cursor moving without the mouse - these are two separate actions.

  He is not anywhere on the screen do scroll down unless you have a running program - this scrolling happens with all programs that could scroll, or simply with a certain program?

  The cursor moves randomly or according to a specific orientation?  The cursor move around all the time or only in certain programs?

  These problems occur all the time, or only when you do something, like click with the mouse or use the scroll wheel?

• Date limited to NOT allow the random text?

  Hello

  I use LiveCycle ES3.  This may seem like a stupid question, but how do I prevent users from random input, not- date text, such as "adsfasdfkafsdj" in a date field?  I defined the required field and set the modes of display/editing/validation validation as indicated below, but still I can enter the random text in the field. Indeed, it appears saying the date is in the wrong format and return correctly, but then the right cursor moves to the next field, leave the incorrect text in the date field and does not require the user to correct my custom error message.

  View model

  Date {MM/DD/YY}

  Edit the model

  Date {m/d/YY} | date {MM/DD/YYYY}. date {MM/DD/YY} | date {MM/DD/YYYY}. date {M/DD/YY} | date {M/DD/YYYY}. Date {mm/D/YY} | date {D/mm/yyyy}. Date {M.D.yy} | Date {M.D.yyyy} | date {mm. DD. YY} | date {MM DD. YYYY} | Date {M.DD. YY} | Date {M.DD. YYYY} | date {Messrs. D.yy} | date {mm. D.yyyy} | Date {M-D-YY} | date {M-D-YYYY} | da te{MM-DD-YY}|date{MM-DD-YYYY}|date{M-DD-YY}|date{M-DD-YYYY}|date{MM-D-YY}|date{MM-D-YYYY}| Date {MMDDYY} | date {MMDDYYYY}

  Model validation

  Date {m/d/YY} | date {MM/DD/YYYY}. date {MM/DD/YY} | date {MM/DD/YYYY}. date {M/DD/YY} | date {M/DD/YYYY}. Date {mm/D/YY} | date {D/mm/yyyy}. Date {M.D.yy} | Date {M.D.yyyy} | date {mm. DD. YY} | date {MM DD. YYYY} | Date {M.DD. YY} | Date {M.DD. YYYY} | date {Messrs. D.yy} | date {mm. D.yyyy} | Date {M-D-YY} | date {M-D-YYYY} | da te{MM-DD-YY}|date{MM-DD-YYYY}|date{M-DD-YY}|date{M-DD-YYYY}|date{MM-D-YY}|date{MM-D-YYYY}| Date {MMDDYY} | date {MMDDYYYY}

  With the reasons that I have above, the user should be allowed to enter data in one of these formats, correct?  I am at a loss for which is why it does not work the way it is supposed to.

  Thank you.

  Hello

  It is also possible with a script to the output of the date field event.

  He uses a regular expression to check the value entered for a specific model.

  Allows are the dates of these way: [9: 99] [.|] /| -] [9| 99] [.| /| -] [99| 9999].

  if (! this.formattedValue.match(/^\d{1,2}[\.\/\-]\d{1,2}[\.\/\-](\d{4}|\d{2})$/g)) {
            xfa.host.messageBox("Enter a correct date!", "Invalid Date", 0, 0);
            xfa.host.setFocus(this.somExpression);
  }
  

• How to change the alignment of the existing "Movie Clip" symbol Point?

  Hi all

  by:  Adobe Flash Professional CS6

  My Flash program contains a 'Symbol' MovieClip and then to the breast of this "Movie Clip" there are 3 layers, which are about 6-7 long chassis.

  Right now is size of video Clip "1680 x 1050" and it is centered on the stage. But the registration point is in a strange situation. It seems

  as it is biased a bit and to the right.

  I was wondering if there was a way to change the point of alignment in the same way as when you create the symbol (* that is when it shows you the )

  points of type "grid" which you click on one of them and it becomes its registration point)? I read about how you can change the registration Point of

  by clicking on the Clip and then clicking on Edit > Edit Selected/symbol/In_Place. But when I try that it's really hard to get where I want it to be...

  What I want is the upper-left corner of the symbol for the registration Point, which is the top-left corner is "0,0"

  Anyway I can do without having to "Hands-free" move image to the Point of alignment... ?

  Any ideas/suggestions would be greatly appreciated!

  Thanks in advance,

  Matt

  You can always create another movieclip that you (select the mc and choose create MovieClip) and when you specify the upper left corner to be the alignment point.

• Problem with the tool move? (Win 7)

  On Photoshop CS4, whenever I select the move tool and decide to move an object in a layer, it moves the object off the screen, making it difficult to bring the canvas to move. I know he's not jumping the layers, because only the object within a single layer, I moved, but I'm the only one who has this problem? How should I do?

  He has only this problem with the tool move, but with scrolling text, text tools tool and the Brush tool, as well. The text tool jump out of the screen and the marquee tool would position the tent somewhere else when I clicked on it to be the Brush tool sometimes jumped on the outline of the brush. Can anyone help?

  Market and stop over the years, I found that Photoshop itself could corrupt if used for a long time.  Or he might not.

  That's how (or if) it does seems to vary depending on other factors.  With some display drivers, for example, sometimes much more.  A particularly frustrating event is when Photoshop just stops where you try a file - save as.  Another, quite common, is that multiple instances of Community Help just start to open jerky.  But probably no matter much what look like symptoms; the source of the corruption, which has been expired for a long time.

  I don't think that it's just a problem, either, but probably several - at least a part of which are due to bugs in the drivers.  From time to time, we hear about specific versions of display drivers, for example, that have been seen to increase the likelihood of corruption.  And some, like ATI Catalyst 11.7 earlier this year, seem to minimize problems.

  What I don't know, because I don't use a Mac, is whether the same situation exists on this side of the fence.  In my heart of hearts, I suspect that it does.  Maybe it has to do with models of memory used under the covers.

  I * CAN * tell you that CS6 is not available yet.

  -Christmas

• Communication with the main movie off external class

  Hello

  Hello, after recognizing that all my problems are as a result of the problem, I just start with AS3, having a litte experience with AS2 and common OOP. So, I try to understand the concept of AS3 on this level.

  My problems are mainly in the defined direction how outwardly objects communicate with the main movie.

  For example:

  (1) can I call a DisplayObject instance out of an external class, if this DisplayObject is defined and added to the display list in the MainMovie?

  2) can MovieClipObjects instance within a table, which works like an instance variable? I think that will cause trouble in the cascade of display list:

  {should be corner braces: class.} MovieClips {i} = new MovieClip();    -> root.class.MovieClips {1} Point separates it levels in the display list, but also object and attribute.

  Thank you

  the debugger does not recognize this error message?

  and if you want to clear the memory occupied by mc when you use:

  var a: Array = [];

  var mc:MovieClip = new MovieClip();

  a [0] = mc;

  use:

  If it was added, remove the mc of the displaylist.  remove all listeners and other references if there is.

  a [0] = null;  or a.shift (), if you do not have null in an array element.  Use a.splice (i, 1), if you used a [i] = mc;

  MC = null;

• Make the cursor to avoid a MovieClip?

  Hi, I'm looking to force the cursor to the slow down/stop move when it gets closer a MovieClip. Ideally you would be able to tread the MovieClip when you move the cursor slowly, but if the cursor moves at speed, he would be obliged to stop at the edge of the MovieClip.

  Is this possible and can someone advise please? This is well beyond my knowledge AS:------.

  Thanks for reading.

  Marc

  Add an if statement to loop of update of your cursor which stops to update the position of the cursor when the distance is less than tolerance.

• Scripts external movies to the buttons in the main movie, help please?

  I'm building a site based entirely flash using Flash CS3 and ActionScript 2. I use external movies for different pages and put the buttons that control these films in the main movie file. Normally, I would simply put the script to control the buttons on the file in the main sequence, not the external ones, but because he has more than two different pages, and I'm fading each external clip in and out, I wonder if possible put the script for the buttons on the main sequence, on the external movies.

  I hope I've explained it right, any help appreciated.

  Thank you.

  Use the following.

  var tl:MovieClip =;

  This ._parent. CV_button.onPress = function() {}

  loadMovie ("' Creative - Outrage_portfolio_goto_cv.swf ', tl");

  };

• How to read a variable main.swf (this content.swf of load) and use within the loaded movie?

  Hello
  
  How to read a variable main.swf (this content.swf of load) and use it within the content.swf?
  
  I have a variable called TextColor = 'Green' handmade film and I want to read this variable from inside the content movie?
  
  anyone can help!
  
  Thank you very much.

  MyGiantBrain thanks for your reply but kglad method worked very well.

  Thanks kglad but there is some changes to your code so that it works, and it is:

  trace (MovieClip (parent.parent) ["TextColor"]);

  Thank you

• Stay on the Page/move with text/pull on my hair

  Dear friends,

  I asked this question before and yet I'm still terrible problems with my graphics flies over the text document when I add more text.  I'm not able to find the archives with the answers that people have written to me.

  I need to write a series of laboratory reports and using a terrible time amount to try to put the images in place. I do not receive a flow of text running.  Even in sections that I created, some of the images floated back up to the top of the section and are sitting there tight.  I am not able to move.

  Here is an example of a problem: I inserted a scatterplot and written my text.  I click on the tab "move with the text."  The Text wrap tab chooses spontaneously "Inline with the text.  My plot is moved to the left column - but I don't want that here.  I need to add a small annotation.  I'm not able to merge the plot toward the Center where the function of "In line with text" does not allow this.

  Basically, I try and change all the figures and plots to "Move with the text", but they tend to change to 'Stay on the Page' when I look away.

  Now, I wonder if I shouldn't open a new document in layout? This way I can add all my numbers for the section of the results in place holders.  But what I can combine "Text Layout" sections "Page Layout"?

  I really want to go back to Microsoft Word.  I would like to become proficient with Pages - and of course to learn my lab equipment!

  5.6.2 pages

  OS X El Capitan

  MacBook Air

  Thank you for your attention.

  Jonelle

  Today, I opened my document to

  Jonelle,

  Each object, with the exception of a table when it is inserted in a document of v5.6.2 Pages, has its object set to Move with text placement and its set to automatic text wrapping. To keep your images of richocheting around your document out of your control, or push a the other, visit the reorganize with the selected image tab and change skin to zero. Now you can place pictures anywhere in your body text.

  Unlike Word, Pages v5.6.2 doesn't have a convenient annotation tool, and we need to position and an oblong text box that contains the annotation group - under the image.

• When I press buttons to move the focus moves to the INTEGRATION which is not intended

  There is integration at the bottom of the screen, whenever I press each shift key, the focus moves to it. I don't want to, I don't turn it on, not deliberately anyway, this is not wanted, it made the browser unusable.

  How can I disable it [question mark] - [cannot use a shift to display the symbol of question mark real, media or almost anything.]

  It seems to have cleared up to now, maybe a stuck on the keyboard control key.

  You wouldn't believe how much it was frustrating!

  Please cancel the request.