REALLY disturbing dynamic sound control

Similar Questions

• Keyboard sound control (volume) blocked to "Mute".

  I've considered this some time between the post in the section on sound or hadeware, but now it is here in any case.

  Well well, directly to the story, here's my problem: I use HP Pavilion DV4T-1400 (series of entertainment if I remember correctly). My sound (or volume) control pad was once very well. One day, after that I made a few changes on the software installed on my computer (I removed some) and restart it, I had a HUGE problem: the of sound control kept displaying "Mute" button (the Red speaker) no matter how many times I tried to touch and touch and touch...

  The funny part is the bar of volume in Windows is still OK, and he has changed every time I touched the pad, for example from mute to turn the sound back on and then cut again for 3 keys. However, the volume key was just a "mute" red, and I can't hear any sound.

  I read the support for the Pavilion DV4T-1400 on the home page, which describes the problem (or almost) even with mine. And he advises me update the BIOS by downloading the latest HP Support Assistant to "to" my computer. I did download and run twice, and all of a sudden, I noticed that in the process of "Tune up", it not there has no option "update of BIOS". All it is exactly the same as a regular disk cleaner option.

  So I post this thread, hope someone can help me solve this problem. Three days without any noise is really terrible with someone who works in the field of design.

  P.S. for a few days, I remember deleting some software with the kind of the name of "plugin" sound similar to, or do not remember the exact name.

  Hello

  The following assumes that you are using Windows 7.

  Download and install the IDT Audio driver on the link below.

  http://ftp.HP.com/pub/SoftPaq/sp45001-45500/sp45211.exe

  Once the installation is complete, restart the computer and after Windows is fully recharged, check whether the mute button works now.

  If she does still not work, download and reinstall the driver of buttons to quick launch on the link below.

  http://ftp.HP.com/pub/SoftPaq/sp46501-47000/sp46731.exe

  Again, once the installation is complete, restart the computer, let Windows fully load and check the button mute.

  Kind regards

  DP - K

• MMS 5650 sound control does not

  Hello

  The sound control to adjust the volume in my Center speaker does not work, it turn on and off the sound system, but the noise level is always the same, it has no effect on the sound level.

  I don't really know when the problem started, maybe when I installed Windows Vista, although I can't confirm that.

  I deleted and reinstalled the latest version of my card Creative sound, the SB Audigy 2 ZS (WDM).

  Any idea, comment or the link to the possible solution will be appreciated.

  Thank you.

  The only thing to check in the PC is the configuration of the speakers.  Go to Control Panel - hardware and sound - its Panel.  Left click on your speaker icon to highlight, and then click Configure and select the 5.1 speaker system.  You can also test the speakers on this Panel.

  If it is configured correctly, the problem is internal in the speaker system.  The only thing you can do is "resettlement" of all connections of speakers (unplug then plug into each connector by ensuring they are deep-set).  If it is not in warranty there is no repair for the speaker systems.  Even if you could find a place to fix the price of a new system of speaker would be about the same as the price of the minimum work.

• Sync ' ing a Firefox with its source from a different computer, the micro-icones disappear links. It's really disturbing!

  Almost all of the favorites were in their hand, left just as icon displayed on the from the left hand of the field tab.
  .
  When you start the synchronization from a computer, you get indeed, on all other computers, all these bookmarks and all directories that contain.
  .
  But what you miss, it's just this icon remember you where it came from. And this is a really disturbing factor in a directory of bookmark that contains about 100 items that you previously sorted by the optical info recently disappeared.

  For example, I have a directory of bookmarks on 'Global warming' with about 200 items, showing a perfect structure on the sync source, but not elsewhere.

  Imagine me clicking on each bookmark on 3 other computers to restore the information within each!

  You can use this extension if necessary:

  • Reloader FavIcon: https://addons.mozilla.org/firefox/addon/faviconreloader/

• I connect my macbook pro to monitor via HDMI, but there is no sound control can do with the macbook, can you help me

  I connect my macbook pro to monitor via HDMI, but there is no sound control can do with the macbook, can anyone help?

  You must use the volume control on the monitor. That's how Apple means yo do and does not provide any method using Mac

• Can I take the option do not disturb on my control center?

  I can take the option do not disturb on my control center so it does not show when I slide up?

  N °

• The speaker volume in the computer sound control mixer is up and works well with the speakers, but with headphones, I can hardly hear.

  Original title: the headphone volume

  How can I activate the volume for headphones? the speaker volume in the computer sound control mixer is up and works well with the speakers, but with the headdphones that I can barely hear

  Hello
   
  1. who is the operating system installed on the computer?
  2. What is the brand and model of headphones?
  3A this works much earlier?
  4. What is the brand and model of the sound card?
  5. have you ever tried to play the Audio using different media player applications and check?
  6. have you tried to connect the headset to another computer or phone and check if it works well?
   
  I suggest you follow these methods and check.
  Method 1: Run the audio troubleshooter.
  Open the Audio http://windows.microsoft.com/en-us/windows7/Open-the-Playing-Audio-troubleshooter playing convenience store
   
  Method 2: Set the earpiece/microphone as default device and check.
   
  a. right click on the volume icon in the system tray at the right corner on the desktop.
  b. Select the playback device, go to torecording tab.
  c. make a right click and headphone/microphone as the default device.
  d. click on apply and ok.
   
  If above steps fails, proceed to method 3.
   
  Method 3: I suggest to disable the improvements and check.
   
  a. right-click on the icon "speaker" at the bottom right of the screen.
  b. Select "playback devices".
  c. right-click on the helmet.
  d. Select Properties
  e. click improvements
  f. check Disable all improvements
  g. click OK
   
  You can read this article for more information:
   
  Tips for solving common audio problems
  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems  
  
  You can also contact the manufacturer of headphones and check.
   
  I hope this helps!

• I'm looking for a sound control that had been deleted by mistake

  I, by wrong, deleted my system sound control. Now I want to reinstall it on my computer. Can I do more?

  Hello

  Thanks for asking!

   

  You want to add the sound icon to the taskbar.

  1. click on Startand then click run.

  2 copy and paste or type the following command in the Open box, and then click OK:

  Mmsys.cpl

  3 click to select the checkbox to Place volume icon in the taskbar .

  4. click on OK.

  If you need assistance or if you have problems of Windows in the future, let us know and we would be happy to help you.

   

   

• After you disable the speakers in the Sound Control panel, how to re-enable?

  On Vista 64-bit with latest updates, in a hurry to catch a signal continuously with the sound only through headphones, I turned off one of the entrances in the sound control panel, which was the laptop speakers.  This was done by selecting the element and selecting Disable in the right click menu.  When I come back to this Board for re - activate the speakers, they are listed is no longer and are not doing a scan for the hardware.  How can we reactivated the speakers?

  The audio device is "SoundMAX Integrated Digital HD Audio", and the computer is a Lenovo Thinkpad T61P.

  Hello

  Right click speaker near clock - reading devices - right click in the area of the boxes - check see the disabled and disconnected devices. Select speaker, then on the right click lower properties check the settings for the active device usage and so on. Also do the same to set up in the bottom left of this box.

  I hope this helps.
  --------------------------------------------------------------------------------------------
  Rob Brown - Microsoft MVP<- profile="" -="" windows="" and="" devices="" for="" it :="" bicycle="" -="" mark="" twain="" said="" it="">

• Sound control icon disappeared from the lower right corner of the screen, how do I get it back?

  Sound control icon has disappeared from the lower right of the icons on the screen column. I need to get it back so I can control the volume without using the control panel every time but don't see any option to reactivate it. Does anyone know the way back on the little icon?

  Sound control icon has disappeared from the lower right of the icons on the screen column. I need to get it back so I can control the volume without using the control panel every time but don't see any option to reactivate it. Does anyone know the way back on the little icon?

  2 methods:

  1. right click on the open space of the lower right (it is called taskbar) > click Properties > click on the Notification area > can you put a check mark on Volumn? OT, it is grayed out?
  If it is greyed out...
  2. use the tutorial below, go to method 3:
  http://www.Vistax64.com/tutorials/106787-notification-area-system-icons.html

  t-4-2

• Rate Dynamic Sound sample problems

  Audio from Adobe dynamic generation page indicates that the dynamic sound signal is sampled at 44100 Hz. I use a library of dynamic audio generation and defining its sampling frequency of 44100 Hz and output when introduced in the Sound it's at half speed. I guess that Flash is actually audio sample to 22050hz instead of 44100 hz in the document. I can decrease the sampling frequency of output of the library, which makes audio playback at good speed, but he kills audio quality.

  
  

  What I would do in this situation?
  

  Welp, it turns out that my library had gone out stereo sound, and writing each sample twice in the stream with the assumption that the output was mono. When I removed the extra call writeFloat, everything was crisp. See you soon!

• T61 Sound controls not working with vista x 64

  I've recently upgraded to full vista for 64-bit vista, and since installation, sound controls do not work.  now, I know that I need a special driver so that they work, but someone can point me to the right pair?  Thank you

  You need to install the driver HotKey.

  As a thought, you may want to add this site to your Favorites.

• Fix NetStream dynamic sounds

  Can I attach something other than my microphone to the p2p netstream? (for example if I wanted to manipulate my sound microphone and broadcast then, if I wanted to play a dynamic sound, or even rebrodcast someone else from the audio) On a similar note, maybe join a modified video image (for example after I applied a pixel bender filter or something similar)

  Sean

  You can not attach anything other than a camera or a microphone to a publishing NetStream.

  However, you can send arbitrary data * with NetStream.send (), and new with Flash Player 10.1 is NetStream.appendBytes ().  He is may be interesting ways of connection that ...

  * - the entire AMF message serialized to a NetStream.send (1:1) must be no more than 64 k for best results in Flash Player 10.1.  many can get more in the future releases.

• Disturb the sound HDD on Satellite L655-175

  Hello

  I have a question.
  Of my Satellite L655-175, I hear a kind of a constant high frequency sound and I think it's maybe normal (the rotations of the hard drive 'the engine') the problem is that sound is disturbing me.
  I'm not in costume again with her.

  So my question is:
  Is there a method to reduce or eliminate this noise?

  As much as I know there no way to control the HARD disk and reduce noise. On the virtual path that is not easy to discuss these issues but the only thing to do is the HARD drive cover and check if the HARD disk is in the right position and don t make a few vibrations.
  That s all you can do.

  Otherwise, contact the nearest Toshiba service provider and ask for help. They can put your laptop on the desk, hear the noise and say, is that it is normal or not.

• Time of design and of the dynamically created controls

  I have a project written in VC6 as a project of the MFC dialog box. In a particular area, I dynamically create several (the exact number depends on user input) CNiGraphs. There is also a two CNiButtons that were created at design time using the resource editor. The problem I have is that when this dialog box is open, a message appears saying it is an eval version and the control will go off after 5 minutes. After 5 minutes of waiting, the CNiButtons 2 go inactive (black tower), but the continuous CNiGraphs of work. I have a valid license of MStudio 8.1.6, version but it seems that these 2 buttons do not recognize the license. There are also other buttons from the moment of conception of the project, but these have no problem at all. When you create the dynamic creation of the CNiGraphs, give them a valid license string, and I was wondering if there is a problem with the time created and dynamically controls created in the same dialog box to design. Anyone know?

  I don't remember, but I can have created these 2 CNiButtons when I was with only an eval license. (All others were undoubtedly create when I got a full license) Could have an impact on them? I have a vague memory of reading somewhere that DTC create controls to check the license when they are created in the designer and store that info in them license. If this is the case does anyone know an easy way to update the license stored in control? I rather not just delete it and Add again because I would avoid having to redo the tab order (unless someone knows how to easily insert something in the middle of the order of tab instead of having to click through all the controls in the correct order)?

  In addition, I don't know if this would affect anything, but the project was originally built with ComponentWorks 1.0, we were forced to move to MStudio when we met a few bugs in CW, so all controls were originally CW controls which have been converted into control of CNi. I doubt that this is so like everywhere else, we changed during controls is not a problem, but I'm ready to try the suggestions.

  Hi JC,.

  I hope you had a good weekend!  I'm glad to hear that you're back running.  Add the extra button was, in fact, causing update the licensing information for the other buttons, as you can imagine.  After further research, I found that the license information are stored only the form of the control, and if this control doesn't change in any way (or in your case, adding a new project), he sees no reason when compiling to recreate a link to the license.  However, after the change of control and a new, it updates the link between the license information, which solved this problem in your case.

  I hope this helps, JC.  Have a great day!