Reboot and select proper on the Satellite L10W-B1768 boot device

Dear

I have this error in my Toshiba Satellite L10W B1768

Reboot and select proper boot device

or insert boot media in selected boot device and press a key

I can't do recovery also USB does not work, I try to install windows from USB / driver external CD/DVD, but not the work redirect me to this page

Reboot and select proper boot device

or insert boot media in selected boot device and press a key

I tried pressing the '0' key, nothing happens

I tried "F12" don't get recovery options.

also in the configuration of the bios not UEFI and CSM (in the advanced-> System Configuration)

How can I solve this problem?

Dear

I have a problem in my toshiba Satellite L10W-B1768

"Reboot and select proper boot device or Insert Boot Media in selected boot device and press a key.

I do not get an option «HARD drive recovery» If I press the "0 or F2" key multiplication, even the boring massage.

How can no recovery Option, I solve this problem?

also I restore the values by defect of the BIOS but same problem

Tags: Toshiba

Similar Questions

  • Satellite M50D-A-10W - error "reboot and select proper boot device."

    I have a Toshiba Satellite M50D-A-10W passing me all nuts "reboot and select proper boot device."

    This has happened before and it was solved by ctr-alt-del and F12 to get into the BIOS where the date went back to some time in 2010 - after put so far and to change the boot device, everything worked fine... until the next day.

    Now I get the screen "reboot and select good boot device ', but the F12 key does not; I also tried F2... the message keep multiplying, no BIOS...
    Help, please!

    In some cases the BIOS is only accessible by pressing the button turn off force on the lower side of the unit.

    Info:
    http://APS2.toshiba-tro.de/KB0/TSB3C03JR0000R01.htm

    After that you were able to start the windows system, its highly recommended to update the BIOS as BIOS update would solve this annoying problem.

    Info:
    http://APS2.toshiba-tro.de/KB0/TSB4903N50000R01.htm

  • I get an error. "reboot and select proper boot device or insert boot media in selected boot device and press a key" while using the hard drive.

    Replace drive hard hgst with seagate and when I replaced the hard drive from hgst orignial he says "reboot and select proper boot device or insert boot media in selected boot device and press a key" and when I tried to install OS it does not display the hard drives to install operating system.please help

    Hello

    Check your cable connections. If necessary check with the manufacturer of the motherboard System Support
    and Seagate Support.

    Make sure that settings/settings (BIOS/CMOS) often F2 that you start the computer is configured to start at
    on the CD/DVD first in the boot order.

    Seagate - Support
    http://www.Seagate.com/support/

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

  • HP Pavilion A6722SC: reboot and select proper boot device or insert boot media in selected boot device and press a key

    My computer has just stopped working and when I turned it on, it says I should change my hard drive. I did, but now the message is whenever I turn on my computer: reboot and select proper boot device or insert boot media in selected boot device and press a key.

    I have Hp Pavilion A6722SC. I have my 1st drive on the driver that I bought and I have the Boot Device Priority :

    1st boot Device [hard disk group]

    2 St boot Device [CD-ROM Group]

    3rd boot device [network startup group]

    4 rd boot Device [group Floppy]

    -> Disk Boot Priority group [not installed]

    -> Group of CD-ROM boot Priority [DSK02...]

    -> Group of HDD to boot Priority [DSK00...]

    -> Group network boot priority [not installed]

    I saw that many said I should disable the floppy, or I should have hard on the boot device 1 or driver, but this doesn't work for me. Someone who have solved problems of this kind? I need help!

    Thanks in advance.

    Sorry for the bad spelling.

    I needed a new OS... I had Windows Vista and I can't install it more, so I have to buy a new OS.

  • Why Microsoft Virtual PC comes with Reboot and select proper boot device?

    Hello

    When that I start Microsoft Virtual PC 2007 it comes up with the following error message:

    Reboot and select proper boot device

    or insertion of the in the selected boot device bootable media

    How can I fix it?

    I am running Windows 7 Professional 32 - bit.

    Any help?

    You have installed an operating system on the virtual device?
    You have created a virtual machine. When you start it, it will try to start.
    There is nothing on the virtual drive so that the system asks to find a bootable floppy
    disk or CD/DVD.

    If you still need help, you can post in the Microsoft Virtualization forum listed below:
    http://social.technet.Microsoft.com/forums/en-us/w7itprovirt/threads

    Sincerely,

  • "Reboot and select proper boot device or insert boot media" tried, still does not.

    I went into the BIOS and changed the order of Boot Drive so that the hard drive comes first as a boot priority, and nothing happened. I always get the reboot and select proper boot device error. My power supply broken so I took an old and put this one rather than broken, but I might miss some cable? I don't know because I'm not good with computers. So if you can help me please, I would be grateful. Thank you.

    Hello

    Welcome to the Microsoft community. I will certainly help you with the problem you are experiencing. I would like to ask you:

    • What is the brand and model of your computer?

    To diagnose this problem more, I recommend you to check and make all the cables are properly connected to the devices in the computer. For help with the same, you can either check the manual of the material that you may have received with your computer or you can contact a hardware technician to do the same.

    Once we are sure that the connection is good, we can diagnose more if the problem is with the software/operating system or if it is a hardware failure.

    If you have a Windows DVD or USB created. You can try to boot from the installation media and run a system restore or repair in recovery options. To do this, follow the steps below:

    1. Boot from the installation media.

    2. When you see the Install Windows page, press or click repair your computer to start Windows recovery environment.

    3. In the choose an option screen, Windows recovery environment, press or click on troubleshooting.

    4. Click on Advanced options etselectionnezStartup Repair.

    If the auto repair fails, try the system restore. It will take your system at the time, and when it was working fine. Follow the steps below:

    1. Boot from the installation media.

    2. When you see the Install Windows page, press or click repair your computer to start Windows recovery environment.

    3. In the choose an option screen, Windows recovery environment, press or click on troubleshooting.

    4. Click on Advanced options etselectionnezSystem Restore.

    5. Select the restore point where everything worked well and follow the on-screen instructions

    System Restore warning: When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

    Hope this information was useful. Let us know the results once you have tried these methods.

    Thank you

  • How do I repair: windows7 error reboot and select proper boot device?

    My computer is about 2 years old.  Sound works just fine.  One morning, I started it up and a black screen came with: reboot and select proper boot device or insert boot media in selected boot device and press a key.  Any key you hit it just kept announces the same message, I had to tough out.  As long as I start the computer with Del, F8 or F10, I can get the computer to boot. No matter what I change, it works for a few times then goes back to the same error.  Also it will not always wake up after he falls asleep.  I tried to do a repair of systems, but it does not work

    Hello

    1 do you have made no changes to software before this problem?

    2. you have the Windows 7 installation disc?

    3. what changes did you and have you been able to boot to the desktop after that?

    Method 1:

     

    I also suggest you to try the other options of WINRE (Windows Recovery Environment) and check.

    What are the system recovery options in Windows 7?

    http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

    Method 2:

    I also suggest you to check the drive for errors that it can cause a Windows to boot.

    Follow this step to do the same thing:

    1. Click Start
    2. Type: CMD, according to the results, right-click CMD-> click on "Run as Administrator"
    3. At the command prompt, type: chkdsk /r

    When you restart your system, your computer will be scanned for errors and will try to correct them.

    Note: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

    Check a drive for errors

    http://Windows.Microsoft.com/en-us/Windows7/check-a-drive-for-errors

    The issue can also occur if the boot device is not correctly defined in the BIOS. Make sure that the hard drive where Windows is installed is selected as first boot device.

    Note: Changing the BIOS / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

    See also:

    http://support.Microsoft.com/kb/266283

  • Reboot and select proper boot device or insert boot media in selected boot device and press a key

    I have an Asus UX31 of Zenbook ultrabook. It is running Windows 8, I installed it via download, is not a physical disk.

    Recently, I ran Windows Update and he knew as usual, until the time of reset. It restarts, showed on the screen "install updates", but then finally started only the following error message:

    "Reboot and select proper boot device or insert boot media in selected boot device and press a key.

    As mentioned, I don't have a disc, my ultrabook is not a hard drive. Internal storage only that there is a 128 GB SSD. I went into the bios and check the boot settings and the SSD is correctly listed as the only option to start.

    I can only assume some question that's happened with the update of windows. I'm not sure of how to proceed now? ATM, I only have a weight £1000 :/

    Hello r,.

    Thanks for posting your query in Microsoft Community.

    By the description of the problem, I understand that you have problems starting from the computer to the desktop screen, it gives the above error message.

    I imagine how it could be frustrating when things do not work as expected. I appreciate your efforts to solve this problem.

    As this problem occurred after installing Windows Update, this could be the reason for the incompatible driver installed with the Windows updates.

    As you have already checked the settings for starting a disc SSD set correctly, I suggest you disconnect all the external device and restart the computer, check if are able to boot to the desktop screen.

    We will try the following methods and check if it helps.

    Method 1: I suggest you create USB recovery media as your laptop doesn't have the DVD Rom.

    If you're having problems with your PC, a recovery USB disk can help you troubleshoot and fix these problems, even if your PC does not start.

    Create an installation media for Windows 8.1
    http://Windows.Microsoft.com/en-us/Windows-8/create-reset-refresh-media

    Method 2: Once you create USB recovery media, auto repair:

    Follow the steps below to perform an automatic repair:

    1 restart the computer, wait for the logo of the manufacturer to check the option of start menu, it will usually F12.
    2. the start menu key can be different with each manufacturer. If you are unable to find the start menu button, you can consult the user manual.
    3. restart the computer, when appears the logo of the manufacturer, continue to press the Boot option menu key to enter the boot menu and change the option to boot in DVD ROM.
    4. Once you start your computer by using Windows 8 DVD or system repair disc, a black screen appears with the gray text "press any key to boot from CD or DVD". Press a button on any.
    5. Select the exact time and the type of keyboard.
    6. click on repair your computer in the lower left corner.
    7. click on troubleshooting, advanced option and then click on auto repair.

    Hope this helps, please reply with the status of the question to get help.

  • X 51 issue "reboot and select proper boot device or insert boot media in selected boot device and press a key.

    Hello, I recently put in a new video card in my x 51 one and its been causing me headaches. I finally spent 5 beep error but now when I turn on my computer, after the alienware logo appears I get this message "reboot and select proper boot device or insert boot media in selected boot device and pre a key."

    I don't know what to do from here. Ive tried to change my priority of boot on my hard drive but it does nothing. I need help!

    try swapping between legacy and UEFI in the BIOS.

  • Cannot start the computer, the error message "Reboot and Select proper Boot device or Insert Boot Media in selected boot device and press a key any."

    Original title: can't access my BIOS, but blocked on select boot device

    I have a laptop Toshiba Satellite Pro. I gave up some time ago and removed the HARD drive to see if has been affected by the decline, as that was my first thought. "When turned on the laptop back, the error message:" Reboot and select clean boot device or Insert Boot Media in selected boot device and press a key. My HARD drive is installed correctly, that am a qualified technician. The laptop goes directly to this error message, when turned on, so cnnot access to the BIOS. Help, please.

    Hi Ryan,

    Please contact Microsoft Community. I will surely help you this question.

    To better understand the issue, let me know if you have tried pressing the F12 key or the key that is used to start the BIOS on the computer?

    Method 1:

    You may need to press the key (which is used to start-up the BIOS) as soon as you turn on your computer before Windows starts. See the article for more information.

    http://forums.Toshiba.com/T5/Windows-7-knowledge-base/how-to-enter-the-system-BIOS-on-Windows-7-computers/Ta-p/275629

    Method 2:

    If the problem persists, I suggest you to return the item and check if it helps.

    What can I do if my laptop Windows 7 or Windows Vista does not start?
    http://forums.Toshiba.com/T5/computer-troubleshooting/what-can-I-do-if-my-Windows-7-or-Windows-Vista-laptop-won-t/Ta-p/285717

    If the problem persists, I suggest you to contact the Toshiba Support for assistance.

    http://support.Toshiba.com/support/home

    Hope this information helps. Reply to the post with an up-to-date report of the issue so that we can help you further.

  • PC freeze/crash followed a "Reboot and select proper boot device."

    We have 11 PC running on a local area network, all currently running Windows 7 Professional. The following happened in recent weeks, on 4 of our PC 11:

    PC freezes completely, however, the mouse cursor will always pass normally, clicking on anything don't generate a result, or will be by pressing CTRL + ALT + DELETE. My first step in the fight against that had to leave the PC alone for 5-10 minutes to see if the problem resolved itself. After about 5 minutes, the PC will be closed on its own and try to reset, prompting the message:

    "Reboot and select good boot device or Insert Boot Media in selected boot device and press a key.

    When you press a key, the message again and again. The only solution I've found that this was a closed hard, leaving it for a minute and restarting, how everything seems fine.

    I'm suspicious that this may happen again, or on the PC so far unaffected, if someone could advise on what could be the cause, or how to stop from happening, I would be grateful.

    How old are the hard drives on those computers?  Is it possible that they have lack of hard drives?

    Download and run the software tester of the drive by the hard drive manufacturer to test the equipment.  Tell us the model numbers (Device Manager), readers and we'll give you links to get the correct software.

  • Reboot and select proper boot device (build new PCs)

    So I have been building a new computer and have finally put it all together, I wanted to check and make sure everything was working and recognised (NOTE: no OS is installed). While starting the computer everything seemed ok, until I got to the restart of the screen and select proper boot device, I checked in the bios to make sure, he was placed under the 1st priority boot device and indeed it was, what I am wanting to know is, is it normal that this message on a new hard drive with no OS installed? Everything is plugged in correctly and tight

    What I am wanting to know is, is it normal that this message on a new hard drive with no OS installed?

    It depends on what was on the hard drive before and how he got to the format.

  • Reboot and select proper boot device HP W5171 desktop

    Hello

    I have just connected to the top of my desk after a long stop (decoration etc) and received the above message.

    Then I go into bios and select the F5 key to restore the default values.

    Any help would be appreciated.

    Alex

    Hello

    I decided it disassemble and take a peek, it turned to be connections to the main hard drive had come adrift and bent the pins in the process.

    I repaired the damage and all is well.

    Thank you for your help.

    Concerning

    Alex

  • Satellite C50-B-13N - error "Reboot and select good boot device."

    Hi all

    My laptop recently bought C50-B-13N moving 39 updates yesterday, when it crashed.

    Get back with me stuck in a loop continuous. After what seemed like the logical approach to reset to factory settings, I have
    seem to have accidentally deleted the data on the disk.

    I have now repeatedly received the error message "Reboot and select proper boot device."

    I tried the F12 approach to , but my Start Menu does not have this option.

    I'm frustrated that the new laptop played if bad, given that I have had Toshiba devices for about 10 years.
    In addition, I am disappointed that potentially serious consequences to remove the drive were clearly deprecated for me, before you start.

    Please give us a solution.
    The laptop is 4 months old.

    In addition, how can I start the process of an application under my warranty?
    A dissatisfied customer of experience to date.

    Kind regards

    CGI

    I seem to have accidentally deleted the data on the disk.

    Obviously the HARD drive recovery procedure is not possible now because the HARD drive recovery files have been deleted.

    I guess you have not created such recovery media as recommended in the user's manual.

    Well, in this case, you have a chance to order a missing middle of recovery and recover the laptop to factory condition.

    Means of recovery can be ordered here:
    http://backupmedia.Toshiba.EU/landing.aspx

  • Satellite C660: message: reboots and select good boot device

    Hello

    I dropped the laptop today literally a few inches from the ground, it slipped from my hand as I was placing it on the ground. He fell flat.

    Now I see the message "reboot and select proper boot device."

    I tried a few different options that I read, and I see the HARD drive in the BIOS F2 thing or whatever it is called. If it is recognized, but I can't seem to move in the message. Any suggestions?

    Thanks in advance.

    PS I will need clear instructions, I'm not stupid, but I need to explain. I don't understand some of the pieces.

    Thank you

    Hello

    I think that your HARD drive is bad.
    I think that you have not checked it correctly in the BIOS.

    Please go to BIOS once more, by pressing F2.
    Now on the first page, you will see date, time, details of CD/DVD drive and you should also see the details of the disk (size, name)
    You see that?

    Otherwise, the HARD disk is not initialized by the BIOS and this means that, because of the fall, the HARD disk has been damaged.

Maybe you are looking for

  • There is no sound when using Firefox. Sound works fine using IE, Win Media Player etc.

    I use a laptop Dell Precision M6400 running Windows 7. I think it started after installing Shockwave

  • How to change the destination of the mp3 download

    I'm eager to save my mp3 downloads to a specific destination on my computer, but when I try to download an mp3 file firefox just registers but I don't know where it is just him, save the download box appears. How to ask where to save downloads of fir

  • Question of GPIB-USB-HS

    Hello everyone, I have 5 machines hooked: set of 2 meters, which connect to a power supply that goes to a function generator and led to a thermostream which then my GPIB-USB-HS is used to hang my computer. I am running an executable file from a previ

  • The locale-specific decimal separator in Fmt?

    Is there a way to get the floating point numbers using the locale-specific decimal separator in the Fmt() function? It seems that SetSystemAttribute will only change the separator of UI elements, as described in this thread.  Call setlocale (LC_ALL,

  • How to recover deleted Outlook Express emails

    original title: permantntly deleted email How can I get several years of e-mails that have been compacted and deleted Outlook express and are not in my deleted messages folder?