Rebound from outside the screen area.

Similar Questions

• RE: iOS iPhone 6 s 10 how l remove or disable the slippery camera from outside the locked screen? This feature is a security and threat privacy for me.

  RE: iOS iPhone 6 s 10 how l remove or disable the slippery camera from outside the locked screen? This feature is a security and threat privacy for me.

  You can not. However, I'm not sure why you think it's a privacy or security threat. The only thing that can be accessed without unlocking the phone is the camera to take pictures. No one can access your data already on the phone.

  You can send feedback to Apple here:

  http://www.Apple.com/feedback

• Join the URI from outside the network

  Hello

  I have a problem to make a call from outside the network of phones internal using URI.

  If I test a call from outside (with Jabber video) to my URI ([email protected] / * /), highway E logs show:

  TVCS: event = "Call rejected" Service = "SIP" Src - ip = "IP address" Src-port = '5060' type-aliases-Src = Src-alias "SIP" = "sip:[email protected] / * /" Dst-alias-type = "SIP" Dst-alias = "sip:[email protected] / * /="Call-serial-number="aaaaaaaa-bbbb-cccc-dddd-eeeeeeeeee" Tag "zzzzzz-Davis-0000-1234-xxxxxxxxx" detail = 'Not found' Protocol = "TCP" response code "404" = Level = '1' elements UTCTime = "2015-06-15 13:26:03, 214"

  If I check the call history, I see that my test call is not crossed:

  Source: sip:[email protected] / * /

  Destination: sip:[email protected] / * /

  Type: Non-traversal

  Protocol: SIP H323<->

  Status: 404 not found

  Step 1
  Area band bandwidth default node
  Alias 1 SIP of source:[email protected] / * / (Url)
  Target alias 1 sip:[email protected] / * / (Url)
  SIP protocol
  Address AAA. ABM CC. DD:5060
  TCP transport
  Not found a reason
  Cause 404

  Step 2
  Crossed bandwidth of Zone node (server)
  Target alias 1 sip:[email protected] / * / (Url)
  SIP protocol
  Address AAA. BBB. CCC. D:25793
  TLS transport

  Step 3
  Crossed bandwidth of Zone node (server)
  Alias target 1 [email protected] / * / (H323Id)
  H323 Protocol
  Address AAA. BBB. CCC. D:1719
  Unsaved pattern
  Destination not found cause

  My configuration:

  * X VLAN: CUCM 10.5 10.5 unit, 10.5 CUPS, ExpressWay C X8.5.1, highway E X8.5.1 (1 of 2 network adapter), DNS server, ad server

  * VLAN DMZ: highway E (the second network card)

  * Outside: External DNS

  (1) ExpC

  (a) areas

  Name	Type	Calls	Bandwidth used	Status of H323	SIP status	Status of search rule
  DefaultZone	Default zone	0	0 kbps	On	On
  CEtcp-[CUCM_PUB_IP]	Neighbor	0	0 kbps	Off	Assets	The search rules permit: 1
  CEtcp-[CYCM_SUB_IP]	Neighbor	0	0 kbps	Off	Assets	The search rules permit: 1
  Neighbor CUCM	Neighbor	0	0 kbps	Off	Assets	The search rules permit: 1
  Covered area (client)	Customer journey	0	0 kbps	Assets	Assets	The search rules permit: 2
  Covered area (UC)	Unified Communications crossing	0	0 kbps	Off	Assets	No rule search configured

  Jabber works both inside and outside.

  Details

  Name: Nearby CUCM
  Type: neighbor
  Hop count: 15
  H.323 Mode: Off
  SIP mode: on
  Port: 5062
  Transport: TCP
  Accept records submitted by proxy: enable
  Media encryption mode: Auto
  Support of ice: Off
  Authentication policy: do not check the credentials
  Trust of SIP authentication mode: Off
  Peer 1 address: CUCM_PUB_IP (-online green)
  Address of the peer 2: CUCM_SUB_IP (-online green)
  Profile area: custom
  Monitor the status of peers: Yes
  Call signalling routed mode: always
  Automatically respond to the H.323 research: Off
  Automatically respond to the SIP research: Off
  Send empty INVITATION of interoperability calls: on
  The poison SIP mode: Off
  Encryption of SIP mode: Auto
  Mode SIP REFER: forward
  Limit mode line SIP SDP attribute: Off
  Length limit of SIP SDP attribute line: 130
  Band MIME multipart SIP mode: Off
  Band of SIP UPDATE mode: Off
  Interworking SIP research strategy: Options
  SIP UDP/BFCP filter mode: Off
  SIP UDP/IX filter mode: Off
  Duo SIP video filter mode: Off
  Address record SIP road type: IP
  Proxy SIP-require header band list: white

  Name: Covered area (client)
  Type: Customer journey
  Hop count: 15
  H.323 mode: on
  Protocol: enforcement
  Port: 6001
  SIP mode: on
  Port: 7003
  Transport: TLS
  TLS check mode: Off
  Accept records submitted by proxy: enable
  Media encryption mode: Auto
  Support of ice: Off
  The poison SIP mode: Off
  Authentication policy: do not check the credentials
  Customer settings stimulus interval: 120
  Peer 1 address: ExpE_IP (-online green)
  Address of the peer 2: expe.mydomain.fr (-online green)

  Name: Trasversal area (UC)
  Type: Course Unified Communications
  Hop count: 15
  User name: qwerty
  Password: *.
  SIP port: 7001
  Accept records submitted by proxy: enable
  Support of ice: Off
  The poison SIP mode: Off
  Authentication policy: do not check the credentials
  Customer settings stimulus interval: 120
  Peer 1 address: expe.mydomain.fr (-online green)

  (b) research rules

  Priority	Name of the rule	Protocol	Source	Authentication required	Mode	Type of rehearsal	Pattern string	Behavior model	On match	Goal
  45	CEtcp-CUCM_SUB_IP	FT3	Any	NO.	Alias matching	Prefix	CUCM_SUB_IP; Transport = TCP	Leave	Stop	CEtcp-CUCM_SUB_IP
  45	CEtcp-CUCM_PUB_IP	FT3	Any	NO.	Alias matching	Prefix	CUCM_PUB_IP; Transport = TCP			CEtcp-CUCM_PUB_IP
  50	LocalZoneMatch	Any	Any	NO.	Any alias				Continue	LocalZone.GetDaylightChanges
  100		Any	Any	NO.	Any alias				Continue	Covered area (client)
  100		Any	Any	NO.	Any IP address				Continue	Covered area (client)
  100		Any	Any	NO.	Alias matching	Regex	(3\d{3})@mydomain.fr(.*)	Leave	Stop	Neighbor CUCM

  (c) changes of

  Change the destination to the URI format alias
  ([^@]*)
  Replace
  ------[email protected] / * /

  CUCM IP to the domain
  Regex
  (. *) @(AAA\.) BBB\. CCC\. D | AAA\. BBB\. CCC\. D)((:|;).*)?
  Replace
  ------[email protected] / * /\2

  Convert domain Unified CM provided until highway information
  Regex
  (4\d{3})@expc.mydomain.fr(:.*)?
  Replace
  ------[email protected] / * /

  (2) experience

  (a) areas

  Name	Type	Calls	Bandwidth used	Status of H323	SIP status	Status of search rule
  DefaultZone	Default zone	0	0 kbps	On	On
  DNSZone	DNS	0	0 kbps	On	On	The search rules permit: 1
  Covered area (server)	Crossing Server	0	0 kbps	Assets	(Connections noactive)	The search rules permit: 1
  Covered area (UC)	Unified Communications crossing	0	0 kbps	Off	Assets	No rule search configured

  Details

  Name: Area covered (server)
  Type: Server covered
  Hop count: 15
  User name: qwerty
  H.232 Mode: on
  Port: 7003
  Transport: TLS
  TLS check mode: Off
  Accept records submitted by proxy: enable
  Media encryption mode: Auto
  Support of ice: Off
  The poison SIP mode: Off
  Authentication policy: do not check the credentials
  UDP retry interval: 2
  Number of UDP attempts: 5
  UDP keep alive interval: 20
  TCP retry interval: 2
  Number of attempts TCP: 5
  TCP keep alive interval: 20

  Name: Covered area (UC)
  Type: Course Unified Communications
  Hop count: 15
  User name: qwerty
  SIP port: 7001
  TLS check the name of the object: expc.mydomain.fr
  Accept records submitted by proxy: enable
  Support of ice: Off
  The poison SIP mode: Off
  Authentication policy: do not check the credentials
  UDP retry interval: 2
  Number of UDP attempts: 5
  UDP keep alive interval: 20
  TCP retry interval: 2
  Number of attempts TCP: 5
  TCP keep alive interval: 20

  (b) research rules

  Priority	Name of the rule	Protocol	Source	Authentication required	Mode	Type of rehearsal	Pattern string	Behavior model	On match	Goal
  50	LocalZoneMatch	Any	Any	NO.	Any alias				Continue	LocalZone.GetDaylightChanges
  100	Search of covered area rule	Any	Any	NO.	Any alias				Continue	Covered area (server)
  150	Search for DNS zone rule	Any	All areas	NO.	Alias matching	Regex	(?. *@%localdomains%.*$).*)	Leave	Continue	DNSZone

  (c) changes of

  Change the destination to the URI format alias
  Prefix
  ([^@]*)
  Replace
  ------[email protected] / * /

  Hey Denis,

  It seems that you might have some problems.

  • VCS - C you have a search rule that targets CUCM, but it does not perhaps not for you for 2 reasons.
  1. It's the same priority as your rule of research area of course which may cause routing loops. Change the rule for targeting priority CUCM 100 to something between 50 and 100.
  2. It will only forward calls to CUCM which begin with a 3 and are followed by 3 numbers ending by mydomain.fr(.*). If you are URI calls that do not match this pattern, they will not be sent to CUCM. Make sure to set your match of regex to include your models DN so that your schemas URI incase they are figure not URI.

  Make these changes, and you may have more luck. Make sure also that your CUCM is configured to allow the composition of the URI. Ensure that the device that you are calling has a URI configured on the line.

  Once you make these changes to retest a call. If that fails, send the history research of the failure of the attempt. You can find it on the VCS under status > Search History.

  -Chad

• DeskJet 2050 All - in - One J510a: outside the printable area

  Hi all

  I use-

  W.7, Ultimate, 64-bit.

  Name of the model: Deskjet 2050 All - in - One J510a
  Firmware version:... SLM2FN1006BR
  Serial number:... CN0BD3F28805D1
  Service ID:... 21074
  IK No.:... 670
  Software version:... 028.000.1313.000
  The printer driver version:... 09.84.00.1189

  When you use Word, in Office 2010, I have margins set to 'Normal ' -.

  Top: 0.98 "low: 0"

  Left: 0.12 "right: 1.18"

  Whenever I have insert a border around my text and that you try to print, I was informed that section 1 page borders are defined"beyond the printable area of the page. Do you want to continue? »

  By clicking on 'Help' I read and follow all the different "solutions" available. None allow the page to print.

  I selected all of the selections of available margin different and even selected some of my own under the "custom margins. The page to print with border permits.

  For example, one that I tried was-

  Top: 0.06 "low: 0.57"

  Left: 0.12 "right: 0.13"

  I then clicked on 'Options' under 'Page borders.'

  to the "measure of" I chose "Text" once more, I was unable to print the page with the border!

  I find this very frustrating, and I can't find a solution.

  I would be very grateful if there is a known workaround that will allow me to print a Word document with a border selected.

  (I have no technical experience, and if there is a soluition, I'd be happy to get detailed instructions!)

  Thank you

  ColinX

  Hello

  Your printer can print without margins (IE margin = 0 ").  This printer can print only to a certain margin.

  bottom margin is 0.57 ",
  top margin is 0.06 "
  and the left and right margins are 0.125 ".
  
  So if you try to print beyond this margin, the impression will be cut or outside the printable area.
  
  Kind regards.

• The letters on my keyboard on the screen are passed. that is the A is now in the first row of letters, the M is in the middle line. How can I change?

  The letters on my keyboard on the screen are passed. that is the A is now in the first row of letters, the M is in the middle line. How can I change? I don't know how he has changed as a first step.

  Try the settings > General > keyboard > English > typing on the QWERTY keyboard. -AJ

• As I try to start my computor, any dialog box appears on the screen are covered in "'

  As I try to launch my putor, any dialog box appears on the screen are covered in "' so I can't put passwords or addresses of sites and if the sound is on a morse codes like noise appears with the comma... I have done all the analysis and attach it to Microsoft but do I have a virus and how do I find? thxs

  .. .all dialog box appears on screen is covered in "' so I can't put passwords or addresses of sites and if the sound is on a morse codes like noise appears with the comma...

  The character you are evidence is a single quotation mark or tick rather than a comma, but the character you see in reality is probably an asterisk in a mask the password text box. In both cases, the problem remains the same.

  You have a key stuck on your keyboard which instantly fills any box entry with the typed characters, they are ticks or asterisks. The only audible ringer is a normal computer error indicating that the keyboard buffer is full, but entry continues, once again an indication of a stuck keyboard key.

  Try another keyboard. It may be possible to launch a key by a sharp tap, but the problem will probably persist in the future. I hope that you don't talk about your laptop.

• How to choose a listItem from outside the list!

  Hello guys! I'm developing an application on the meetings, and I am experiencing a small problem. The thing is: in the application I need a list to respond to music. Explain better: I want the list to automatically change the selection when the music reaches a predetermined point. As in its stars, the first element should be selected and then when it gets to 10 seconds, It shoud jump to the next, and so. To do the checks on the position of the music, I use OnPositionChanged. It's the portion of code:

  onPositionChanged: {}
  > console.log ("BBBBBBBBBB")
  > >
  > var i = myModel.data (myModel.find(["topic1","1"]))
  > If (mediaPlayer.position > = {i.startTime})
  > listView.select (i, true)
  > console.log ("AAAAAAAAAAAAAAAAAAAAAAAAAAAA")
  > >
  > > }

  In this case, the list takes the data of the dataModel, and the first has the title Topic1 and a property named startTime which in this case, that I set to 1. If I launch the app, when the stars of the music and the first signal from the position has changed is sent, the console displays "BATH", then the check is effective, because the console displays "ADRAR", but nothing happens on the list and the point is not to get selected. I thought it might be an error in the "var I = myModel.data (myModel.find(["topic1","1"]))" part, but then I called console.log ("i.startTime") and the console.displays 1... so the only thing left is the listView.select part... Someone knows how to call a selection of items from outside the component list view?

  Welcome on the support forums.
  I suggest you re-read the API ListView/DataModel carefully.
  to call select, you need the path of the index.
  Data() returns the list item associated with the path of the index.
  Find() returns the index path, you must call select.

  Use a var to store the row, and then use that data() and select().

  and if I can offer a unrelated suggestion, 'i' use only for counter variables, use speaking names for others, for example "row".

• Is it possible to call a sub procedure event from outside the process?

  Hi all

  I was wandering if it is possible to activate a sub-process of event (started by an event message that is implemented by a 'set interface') by calling interface that seems exposed as a service?

  Or the sub-process of event can be triggered only by an activity that is executed in the same process, where is the event sub-process?

  Hi Clarec,

  If you expose your subprocess of event with an event of boot Message and you have to use a correlation set in the main part of the process, you can call it from outside the process by using the correlation key.

  Dan

• We try to use Adobe Photoshop Lightroom 4 on a new laptop with Windows 10.  Everything on the screen was to small to use.  I got the picture to the center of the enlarged screen, but the words on the side of the screen are still too small to read

  We try to use Adobe Photoshop Lightroom 4 on a new laptop with Windows 10.  Everything on the screen was to small to use.  I got the picture to the center of the enlarged screen, but the words on the side of the screen are still too small to read

  kathleenl62675526 wrote:

  Hi Tanuj,

  There is no place to change fonts.

  You must go to the LR Edit (or Lightroom on Mac) menu > Preferences > Interface > choose 'Options' in the menu 'panels '. There should be a setting for the font size of Interface. You will need to close and restart LR for the font change are taken into account.

• Convert to PDF from word, the fonts are not included, the word doc record embedded fonts, but conversion does not incorporate fonts?  What should I do to get the embedded fonts?

  Convert to PDF from word, the fonts are not included, the word doc record embedded fonts, but conversion does not incorporate fonts?  What should I do to get the embedded fonts?

  I used times new roman in word 2013.  New file.  Apparently the version of adobe that I use will not incorporate.  I use the version line.  I was told that I have to upgrade to Adobe Pro.  I'm dealing with a patent application, so I can't share the document.  The patent office cannot accept that documents with embedded fonts.  My drawings that have been scanned and then converted are a problem too because I get an error based on the size of the page (23.6 "x 32.4") and I am unable to reduce this size in files from Adobe.com.

  Unfortunately I signed up for this product that get these two converted documents and uploaded only to discover that the conversions will not download.

• How to stop the removal of the pixels outside the canvas area?

  When I develop a selection or transfer and image/object autour then deselect the edges/parts that end up falling outside the area of the canvas are deleted.  How can I stop this? When I'm going to move the layer or resize I can't because parts never landed outside the canvas area have been removed.  It's Photoshop CS6, I never had this problem with CS5.

  Activate the crop tool and turn off [] Delete cropped Pixels in the area options.

  -Christmas

• Toolbox for CreateJS: how to control the main timeline from outside the canvas.

  Hey everybody,

  I'm currently doing something simple, but my animation film breaks whenever I try to change my code. I created a basic animation in Flash where an object moves from the left side of the canvas, to the right and then loops of the last frame of the first image. Nothing else. The animation is simply placed on the main timeline. I exported the animation with the Toolbox for CreateJS through the extension of the Flash and animation series as it should. I'm trying to start and stop (reboot of the first image) the animation with the mouse on and off mouse events. I want that the events to fire when wriggling over/stop a div outside the animation canvas tag. Is this possible with CreateJS? I'm trying to find a way to control the main timeline without being inside the canvas tag.

  HTML example:

  http://www.thephotoncore.com/testing/example_test.html

  Example Code:

  < id article 'container' = >

  < canvas id = "canvas" width = "550" height = "400" style = "background-color: #cccccc" > < / canvas >

  < section id = "animation_control" >

  < p > hover over to start and stop animation. < /p >

  < / section >

  < / section >

  Thanks again for the help!

  -DJ

  Hi DjPhantasy5,

  All the clips on the scene are children of the scene,

  So now the "mouseover" all clips on the stage could be stopped with stop and on the "mouseout/mouseouthandler()" all the children could be restarted with gotoAndPlay like this:

  function Stop()

  {

  If (stage & stage.children)

  {

  var t = stage.children.length;

  for (i = 0; i< l;="">

  {

  child var = stage.children [i];

  If ('stop' in child)

  Child.Stop ();

  }

  }

  }

  function Restart()

  {

  If (stage & stage.children)

  {

  var t = stage.children.length;

  for (i = 0; i< l;="">

  {

  child var = stage.children [i];

  If ("gotoAndPlay" children)

  child.gotoAndPlay (0);

  }

  }

  }

  See http://www.liauw.nl/forums/adobe/djfantasy5/index.html

  But it is also possible to expose "ball1", for example, by adding it to the document.

  This can be done by adding the code for "ball1" as follows:

  / * js

  document.ball1 = this;

  */

  Then stop the animation would look like:

  function Stop()

  {

  If ('ball1' in the document)

  document.ball1.stop ();

  }

  etc.

  Have fun!

  Ronald

• Blur outside the zoom area

  I created a zoom on a Captivate slide area and I wanted to blur parts of the screen outside of the zoom area. To create this effect, I just inserted a chart containing a blurred version of the parts of the screen outside of the zoom area. Is there a method in Captivate, what can I use to create this same effect?

  Am I missing something here? The "external fill area" on the zoom settings, should solve this problem? Shouldn't it?

  Thank you

• Can the iPad reset my new email password from outside the material?

  I used my mini iPad more than 2 years. A day ago I had to change my password main e-mail through my office due to some strange events in my account. My Android phone has stopped receiving emails after that; I have to reset the password in it. I thought I have to reset my iPad, too, but it seems that the emails always get through, as if nothing had happened. Is this normal? How could the iPad reset my password by email directly from the e-mail box, to outside the material? Is it considered normal?

  I've never been through this. To change the email password, you will need to go into settings, messages, contacts and calendars and manually change them

• Change the folder of default reports from outside the sequence editor

  Hello

  I want to set the path to the folder of the regular reports of TS (xml) outside the sequence editor, i.e. in a txt file. I would like to load this value in the sequence or the performance of model sequential (to read this file). Play with what I achieved only copy reports to different my folder both outside. No one knows how to correctly do this operation?

  See you soon,.

  K

  I have accomplished this setting the path of the report dynamically, using the ReportOptions reminder in my process model.

  I had set the following report options:

  Parameters.ReportOptions.DirectoryType = "SpecificDirectory".

  Parameters.ReportOptions.Directory = 'C:\\Program Files\\Functional Test\\Reports\\' + Parameters.UUT_PN

  Parameters.ReportOptions.BaseName = 'report '.

  Parameters.ReportOptions.UseFormatForExtension = TRUE

  Parameters.ReportOptions.Extension = «»

  Parameters.ReportOptions.ReportFilePath = «»

  Parameters.ReportOptions.NewFileNameForEachUUT = TRUE

  Parameters.ReportOptions.AddTimeAndDateToFileName = TRUE

  Parameters.ReportOptions.GeneratePath = TRUE

  arameters. ReportOptions.Format = "html".

  The second entry above, I set the directory based on the number of game USE which is analyzed by the operator.  So in your case, you will need to set the "Parameters.ReportOptions.Directory" item based on a path read you a text file.   According to the structure of your text, file, get the path of the report (from file) could be done in a few differnet ways...

  Thank you

  Paul Holzrichter