Blur outside the zoom area

Similar Questions

• DeskJet 2050 All - in - One J510a: outside the printable area

  Hi all

  I use-

  W.7, Ultimate, 64-bit.

  Name of the model: Deskjet 2050 All - in - One J510a
  Firmware version:... SLM2FN1006BR
  Serial number:... CN0BD3F28805D1
  Service ID:... 21074
  IK No.:... 670
  Software version:... 028.000.1313.000
  The printer driver version:... 09.84.00.1189

  When you use Word, in Office 2010, I have margins set to 'Normal ' -.

  Top: 0.98 "low: 0"

  Left: 0.12 "right: 1.18"

  Whenever I have insert a border around my text and that you try to print, I was informed that section 1 page borders are defined"beyond the printable area of the page. Do you want to continue? »

  By clicking on 'Help' I read and follow all the different "solutions" available. None allow the page to print.

  I selected all of the selections of available margin different and even selected some of my own under the "custom margins. The page to print with border permits.

  For example, one that I tried was-

  Top: 0.06 "low: 0.57"

  Left: 0.12 "right: 0.13"

  I then clicked on 'Options' under 'Page borders.'

  to the "measure of" I chose "Text" once more, I was unable to print the page with the border!

  I find this very frustrating, and I can't find a solution.

  I would be very grateful if there is a known workaround that will allow me to print a Word document with a border selected.

  (I have no technical experience, and if there is a soluition, I'd be happy to get detailed instructions!)

  Thank you

  ColinX

  Hello

  Your printer can print without margins (IE margin = 0 ").  This printer can print only to a certain margin.

  bottom margin is 0.57 ",
  top margin is 0.06 "
  and the left and right margins are 0.125 ".
  
  So if you try to print beyond this margin, the impression will be cut or outside the printable area.
  
  Kind regards.

• How to stop the removal of the pixels outside the canvas area?

  When I develop a selection or transfer and image/object autour then deselect the edges/parts that end up falling outside the area of the canvas are deleted.  How can I stop this? When I'm going to move the layer or resize I can't because parts never landed outside the canvas area have been removed.  It's Photoshop CS6, I never had this problem with CS5.

  Activate the crop tool and turn off [] Delete cropped Pixels in the area options.

  -Christmas

• Rebound from outside the screen area.

  I have three image controls that I use as buttons.  Complete creating the application, I want to use the rebound effect to raise these buttons at the bottom of the screen - outside the screen area.  When I put my starting position to keep it outside the screen area, the page displays scroll bars and once images bounce in place, they disappear.

  
  This is not an attractive effect.  How can I bounce these controls with a starting outside the area of the screen position and avoid the scroll bars?

  Try setting includeInLayout = false on the buttons until they hit their final

  position.

  If that doesn't work, try to put the buttons in a Web and set the

  width/height of the canvas before you place and animate buttons.  You

  perhaps also the minHeight value = 0 on the canvas.

• Export all the layers in png in Photoshop, including those outside the canvas area

  I use the script, but if some of my layers are outside the canvas, it removes those the only visible part.

  But we need everything in the layer in png, so is visible in the Web or it is outside.

  Best,

  Gunjan

  Use activeDocument.revealAll (); then export all your layers.

• Text outside the demonstration area

  Hi all. I am a new user of Captivate 5.5. I created a short demo extracted in Captivate, including the audio narration and captioning.

  Now my supervisor would like to know if there is a way to set aside a screen area (on the side or the bottom of the screen) exclusively for the display of the narrative text.

  I know how to use captioning (covering the demonstration area) and the areas of caption text (which are positioned in the demonstration area), but it is thought in terms of making the smaller real demonstration area and have text accompanying in space that would be released.

  Is it possible to do?

  Thanks for your help,

  -George

  Hello

  Perhaps my idea on a slide master Knockout could give you inspiration? I have blogged about it:

  Create and use a Knockout Master blade

  Lilybiri

• Outside the document area, why can area I not see text of work?

  I'm editing a document already created in CS5.  I want to spend some areas of text around, but when I drag them out of the design page and in the gray area (for lack of a better name) the text disappears.  The text is black, it should be visible.  As soon as I click on something else, this text box basically disappears rendering my use of space on the side of basically useless.

  I guess that's preferably a setting, but I'm not.

  Thank you!

  Gray area? Looks like you're in preview mode. With nothing selected press the w key.

  Bob

• CFCHART: Remove values outside the chart areas

  Hello

  I use cfchart to build a pie chart, as well

  < chartwidth cfchart = '400 '.
  format = "jpg".
  ShowLegend = "false" >
  
  < cfchartseries type = "pie".
  Query = "users".
  ValueColumn = 'age '.
  PostesColonne = "name" >
  
  < / cfchart >

  However the circular diagram shows, and a number is presented outside the graph to sectors for each age value returned by the database, as shown in the picture as an attachment...

  Wondering how to disable those, so only the pie chart shows... with no numbers that surrounds

  Thank you very much

  Never tried this, but "it might work" (and if it was Star Trek, it would always be):

  Try to set the attribute foregroundColor tag cfchart to the same value as your background of the chart. Try 'white' or even 'transparent '.

  -Fernis

• Take a virtual server inside and outside the reserved area of the different shots.

  Hello. A problem that my team often discovered for testing (QA) is that when we re-establish checkpoints that were taken while the virtual machine was still a part of a domain is that it still does not work properly and that he enjoys the confidence of the questions. As a result, we have been in practice out of the field before making a new nod and then by restoring the nod to the field it is necessary to the virtual machine.

  However, it takes time. 175468 KB that can help me, I found, but I want to assure you that I understand my options properly with him.

  https://support.Microsoft.com/en-us/KB/175468

  I think that method 1 as a work autour is my best choice that we will not / do not have access to domain controllers. I want to know is that if I use this method, how will I get around because of the virtual will be always sent a new password with the PDC after that I reload for each snapshot? If my environment has 5 align the shots that I need to perform this register around on, at the time wherever I touched the 2nd snap shot to make the change of the password that has been saved with the first snap is no longer valid with the PDC and I'm having the same problems as I do now. I understand that correctly? If so, how to do this? TIA.

  Most of my pictures are on Windows Server 2008 R2, but I have a few on Server 2012.

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)

  *

  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• Buttons in response outside the playing area.

  
  I'm using a button state transitions within a touch of the State. All that is supposed to move to do so.
  However, for some reason, this happens not only when I roll over the status button but also when I ride below.
  Just when I drive under it, not on the sides or above. I did exactly as muse themes shows in his tutorial.
  They say it's not their widget but the status button itself. How should I do? What I've done wrong?
  .
  Filip

  You need to check the States and applied the change with the States, as nested content can be confusing sometimes.

  Thank you

  Sanjit

• Blur zoom area

  I'm zooming in on a specific area of a graph, I cut and pasted on a blade. Graphics of origin is not altogether clear at first, so when I Zoom in on the area, the magnification really blurs the content. Any suggestions?
  THX,
  Redbud9

  Hi redbud9

  When you insert a Zoom area, actually get you two objects on the slide. One is the zoom area and the other is the destination of zoom. Normally, you place the zoom area on what you want to zoom and the zoom destination is where the enlarged image moves appears. If you double-click on the zoom destination area, you will see a button titled "choose image...". ». When you click this button, you can choose an image that is used instead of simply magnifying of the zoom area.

  See you soon... Rick

• E-mail Z10 My Telus blackBerry on the Z10 will receive outside the WiFi, but will not send unless I'm in a WiFi area

  E-mail for Re accounts: Gmail and others will send and receive very well through the network, but my Telus email will not receive outside the WiFi area.

  Hey glennmerton,

  Welcome to the community of BlackBerry Support Forums.

  Thanks for the question.

  What error do you get when you try to send an email an email?  Also if you go to settings > accounts and open the e-mail of Telus, are the identical parameters to this?

  For the use of POPS :

  • Incoming mail server: pop.telus.net
  • Port: 110
  • Outgoing mail server: smtp.telus.net
  • Port: 587

  Note: remove the SMTP Username and password for SMTP if they inhabit.

  To use IMAP :

  • Incoming mail server: imap.telus.net
  • Port: 143
  • Outgoing mail server: smtp.telus.net
  • Port: 587

  Note: remove the SMTP Username and password for SMTP if they inhabit.

  I look forward to your reply.

  See you soon.

• How to print a picture outside the paper or canvas area?

  I have a gradient image I want to print out the size of the paper or outside the canvas area. I tried to change the document and configuration of the printer and nothing works. When I print, the page is a white border around the entire page. Can someone provide suggestions?

  I just scanned the PDF of Xerox for your printer and see no option for printing without margins listed. The normal procedure would be to print on oversize pater and cut to the desired size. Some printers to office inkjet or inkjet roll can do without borders for the reproduction of pictures or posters, but the color normal laser printer this is impossible.

• Scan of the brands outside of the content area of the form?

  We have a number of forms requiring that four scan marks on the page first alone, outside the content area of the form. Expand the content area is not an option because it could break paging duplex. Another approach would be to have the marks on the master page, add a script to hide if pageNum! = the first page. However, which only works for dynamic forms.

  I wonder if I have a third option by adding four tiny sections, one for each brand of scanning and adding brands scan only on the first page. In this case, I have to somehow exclude these content areas flowing and paging, because they behave like static placeholders.

  Any ideas?

  Hello

  Why not have a single master page to page 1, with scan marks. Then, a second master page for all subsequent pages.

  There are two options. You can restrict the first master page to a maximum number of occurrences in the Master Page tab you can also set the pagination of the design pages to use the master page, for example:

  Page 1 placed on Master Page 1 (see object > paging tab, when you select to page 1)

  Placed on Master Page 2 page 2

  All subsequent pages the previous value of follow.

  Hope that helps,

  Niall

• In CS4 crop tool captures a blank canvas unwanted outside the image

  I'm a bit puzzled by the crop tool in CS4 compared with CS2 and earlier versions.  The most irritating feature is the following: in CS4, the marquis does not lock the edge of the image; Instead, it easily moves outside the file area, capturing extra blank canvas.  The result is a lot of waste of time zooming in and fixing the problem after the fact by the projection of splinters of canvas of extra unwanted.  Is there a way set a preference so that the marquis of trimming stops at the edge of the file, as it did in earlier versions of photoshop?

  Don't forget to choose the view > Snap to > Document limits.