Receive a "prepairing standby" while performing Windows updates.

Similar Questions

• Error 80080008 while installing Windows updates.

  Original title: suziwhy

  I tried to upgrade to 8.1 windows, but he refused in the end.

  Now, I get a 80080008 error whenever I try to install the updates.

  Can anyone help? Please

  Hi Suziwhy,

  1 are you this error during upgrade to Windows 8.1 or during the installation of Windows updates?

  2. What is the brand and model of the computer?

  If you get this error when installing Windows updates, then it normally occurs because the file Wups2.dll included in the latest version of Windows Update is incorrectly installed or became non registered.

  I suggest you to re - register the Wups2.dll file and check if this solves the problem.

  Follow the steps to re - register the file by using the command prompt:

  a. press the Windows key + X , and then select (admin) command prompt.

  b. run the following commands and press ENTER after each one:

  net stop wuauserv

  regsvr32 %windir%\system32\wups2.dll

  c. now, you will receive a verification message that the DLL is registered. Click OK.

  d. start the automatic updates service. To do this, type the following command at the prompt (admin) command and press ENTER:

  net start wuauserv

  e. type Exit.

  Reference:

  Problems with installing updates

  http://Windows.Microsoft.com/en-CA/Windows/troubleshoot-problems-installing-updates#1TC=Windows-8

  You can try to install Windows 8.1 after the steps above.

  Also check the link for more information:

  Update to Windows 8.1 of Windows 8

  http://Windows.Microsoft.com/en-CA/Windows-8/update-from-Windows-8-tutorial

  I hope this helps. If you have any other queries/issues related to Windows, write us and we will be happy to help you further.

• ERROR CODE 80070643 WHILE INSTALLING WINDOWS UPDATE SECURITY FOR MS OFFICE POWER POINT (KB982158)

  PL. SUGGEST SUITABLE SOLUTION-OPERATING SYSTEM PREINSTALLED WINDOWS 7 PREINSTALLED OFFICE MS. UPDATED FOR MS OFFICE 2010

  Swami,

  You can watch the following article to see if this will help with the error 80070643.

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-80070643

  Let us know if this helped.

• Error message: "the site has encountered a problem and cannot display the page you are trying to view", while running Windows updates.

  Original title: Windows updates works do not, cannot get windows updates

  I had to reinstall Windows XP service pack 2. I went to the updates and got this message. The website has encountered a problem and can not display the page that you are trying to view  I tried several times and got the same results.

  The problem is that you need to install Service Pack 3 before being able to get all post-SP3 updates. :-)

  Here's what you need to do:
  Preliminary work:

  Download the installation files of SP3, IE8 and Microsoft Security Essentials, which is an effective antivirus/antimalware program. I prefer to keep these (and other useful files) on a USB key, but this is optional. Here are the links to all the installation of three files:

  http://www.Microsoft.com/download/en/details.aspx?ID=24 (for SP3)

  (You can TOTALLY ignore the message "intended for it professionals"!)

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=43 (for IE8)

  http://Windows.Microsoft.com/en-us/Windows/products/security-essentials (for MMS)

  1. physically disconnect from the Internet. Also unplug all unnecessary devices!

  2. temporarily disable the automatic updates. To do this:

  Start | Control Panel (switch to Classic view if not already selected). Automatic updates

  Select "Turn off automatic updates" and click OK.

  3. install the SP3. Restart TWICE.

  4. switch to IE8. Restart TWICE. (Note: it is important to let IE at the level before the upgrade to SP3 IE6.) After you are in SP3, then you can switch IE6 to IE8).

  5 install MSE.

  (What happens very often is that someone has their software antivirus running as they try to install SP3, which often translates into chaos! "This is why it must be done after installing SP3 and IE).

  6. make sure that firewall Windows is activated (it should already be):

  Start | Control Panel | Security Center

  (Now you can physically reconnect to the Internet. Update Antivirus program.)

  7. visit Windows Update to download and install only the critical security updates. Restart each time you are prompted.

  8. reactivate the automatic updates.

• 80242614 error code when you perform Windows updates

  Original title: error code 80242614

  My computer did a restart on an update, then went black, and had to do a system restore to get back to normal.

  Hi Brenda,

  You can try the following steps and check.

  Step 1:

  You can check in the update history to discover the update failed recently and you can double click and search for the error code.

  See the Windows updates are installed

  Step 2:

  If you see an update failed with the error code you mentioned, refer to the following article to reset the Windows Update components and then try to download the stand-alone package with updates from Microsoft download center.

  How to reset the Windows Update components?

  a. to download updates from the Microsoft Download Center

  b. Enter the KB article number search and download the same.

  c. double-click on the downloaded file.

  d. click on run and follow the wizard to install it.

• Error 80246001 while installing Windows updates

  error 80246001
  

  Update error 80246001

  Hi graziellafragiacomo,

  ·         What is the exact error code?

  Check to see if the following is useful.

  Step 1: See the update history for the error failed.

  See the Windows updates are installed

  Step 2: Try to reset the Windows Update components and then try to install the update. Refer to the below article mentioned the same thing.

  How to reset the Windows Update components?

  For more information, you can consult the following link.

  Problems with installing updates

• Receiver error message: "database error detected 0x800f081f" and unable to perform Windows updates.

  Original title: windows are not up-to-date

  database error found 0x800f081f do not set windows troubleshooting, that of why system undo the changes, updates are having not installed so what should I do to solve this problem?

  Hi Hassan,.

  Thanks for the updates.

  You tried to perform step 1 and step 2 provided in method 3 to check the issue?

  If you did not do the 3 method, try the steps in the same and check if that helps.

  If the problem persists, you can try the following steps and check.

  Method 1:

  You try to run a SFC scan on the computer that would be a system file corrupt on the computer search and replace.

  Use the System File Checker tool to repair missing or corrupted system files

  Method 2:

  You can run the following DISM command from an elevated command prompt and see if the patch will install after you run the DISM command.

  a. drag from the right edge of the screen and then click on Search.
  b. enter the command prompt in the search box.

  c. in the list of results, drag down on or right click command prompt, and then press or click on run as administrator.
  In the administrator command prompt window, type the following commands. Press ENTER after each command:

  DISM.exe / Online/Cleanup-image /Scanhealth
  DISM.exe / Online/Cleanup-image /Restorehealth

  Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.

• My laptop stop while configuring windows updates, it now doesn't start upward.

  After installing updates my laptop turns off automatically, re-started when he went to a screen saying it was the latest updates of windows configuration.   He got 15% and stayed like that for about 20 minutes, and then my battery died.    Now, it starts up.  The laptop turns on and is lit saying it is on, etc., but all I have is a black screen.  I can hear the hum of the fan, but nothing happens.    I tried to re - start and press F8 to try to start in safe mode, but I get nothing.

  Hello

  The operating system that you are running on your computer?

  If you are unable to start the computer in safe mode, and then try to perform a system restore in the system recovery options menu.

  For more information, see these articles.
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7
  http://Windows.Microsoft.com/en-us/Windows7/what-is-system-restore
  http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions

• S3: how he resolved to crash prob. -While in Windows update

  First time it happened, I brought the S3 to the Acer Singapore service center.  Problem: the unit would not start.  The service of man has done something on the spot and he has started the last Windows (restore?) before the update that hung from the system. If no service has been performed.

  Recently, the system has been updated (update even) and again hung the system.  Yet when I tried to restart and it couldn't boot.

  Question: How the military managed to restart the system returns to the last without usb restore point.  I want to restart at the last job windows and backup important files before you perform the reset of factory or something.

  It probably started tap F8 as soon as it hits the power and scrolls to the last known good boot.

• Receive 81F error message when installing Windows updates.

  What is error 81F?

  When I install the updates, but when the update is in the State, the installation was interrupted and the windows massage me this error. Please answer this Question.

  Hello

  -Did you change on your computer before the show?

  Follow the steps in this article and see if the problem still occurs.

  Problems with installing updates

• You can use a computer phone (phone of Magicjack) while performing a Windows Update?

  ORIGINAL TITLE: Windows phone

  You can use a computer phone (phone of Magicjack) while performing an update of Windows for Windows Vista?

  
  
  Givemehelp

  I don't know - try it & find out.

• Windows Update process

  When the updated Windows and OS, is run a Microsoft virus check on the computer?

  Hi John,.

  While performing the update of Windows Microsoft is no not any control of virus on the computer. It only checks the necessary update that must be installed on the computer and installs the updates.

  Reference: http://support.microsoft.com/kb/311047

  Kind regards

  Sandeep

  Microsoft Answers Support Engineer

• KB2852386 is not clean Windows Update as expected files

  October 8 (Patch Tuesday), I installed all the Windows updates new for my system (Win 7 SP1 x 64).  I was particularly happy to KB2852386, as it should have allowed me to pick up a lot of disk space.

  The patch installed fine, and I found the button "Clean up system files" in the disk cleanup window. Using it, I found that I have 3.95 GB of files from Windows Update that can be removed (just what I expected).  So I ran the program, re-directed the disk cleanup utility to verify that the Windows Update files were cleaned and then restarted my system (it's my understanding that you should restart the system to actually get out clean files).

  When the system was stop, I received a 'Windows configure Windows updates... "(ou quelque chose comme) message."  When the system is restarted, I started with something similar, but then received the message "configuration of the Windows updates failed. Restoration of the changes. Do not turn off your computer. "When the message finally reached (several minutes), I got a"Stop"message and the system has rebooted.

  To restart, I found that I had to reinstall KB2676562, KB2872339, KB2882822, and IE10.  Go in disk cleanup, I found that I still 3.95 GB of files of Windows Update that can be cleaned.

  I have all this repeated several times, hoping it would work.  He never did.

  Any ideas on how to get it to work?  Alternatively, is there a way to clean up the files manually?

  The fact that the link exists does not guarantee that the two stores are not synchronized, it is just an indicator.

  It seems to me that all drivers in the package of the remote desktop client are corrupted.  Which may also extend to the whole of the remote desktop services, because they are both installed at the same time by a single KB (KB2592687).  This is the package (8 Remote Desktop) of "RDP8".  If my assumption is correct, then you need to remove the headings for all these drivers:

  BTH.inf

  tsgenericusbdriver.inf

  tsusbhubfilter.inf

  termkbd.inf

  termmou.inf

  There's a 2nd number at work here, however.  RDP8 package you have not actually changed.  Instead, a package that depends on a, and when the package which it depends is scheduled to uninstall which makes RDP8 also eligible to be uninstalled.  This package is known as the 'DTLS' (KB2574819) package.  You probably version v1.007 of the DTLS package, which has a bug in its packaging that allows him to be replaced and removed, while RDP8 is still in need of him.  The difficulty that you can install the package here DTLS v2.000 version: http://support.microsoft.com/kb/2574819/en-us

  My recommendation is to get through with the cleaning, remove the registry entries for the above inf files and allow the uninstall to complete.  After that, I suggest that you run the update of the tool (checksur.exe) system to see if there are any other corruptions which need to be repaired.  Then download DTLS v2 and install and re-install the package RDP8.  (available here: http://support.microsoft.com/kb/2592687/en-us)

  If all goes well, which should eliminate the known corruption problems.

• How to control the Windows updates are installed on the Windows Surface of RT

  I recently had to perform a refresh to solve the problem with desktop on the desktop icons that appear as spaces. After the update, I had to reinstall the update for Office 2013. When I went to Windows Update to do this, I found it with a group of 9 other updates, these 9 were all marked as ready for download and installation, Office 2013 update is not checked. I disabled the office 2013 update and not the other 9 updates, thinking that I could make those after I had Office installed upgrading so I would like to know if my taskbar icon problem has been resolved. At the bottom of the screen even when the Office update was the only update checked I chose to install updates. The Surface actually installed all updates, not only the update of Office.

  Is there a way to control which Windows updates are installed in fact at some point? Unchecking them made no difference.

  Hello

  Welcome to the Microsoft community!

  I understand that you are facing problems while installing Windows updates and want to know if there is a way to control which Windows updates are installed in fact at some point. I'm here to help you.

  I suggest to refer to the following article and perform the steps mentioned there.

  Problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows-8/troubleshoot-problems-installing-updates

  Automatic update of Windows: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-8/Windows-Update-FAQ

  It will be useful. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

  Kind regards!

• Windows Update uninstalled audio output? (Conexant HD)

  I'm running a Pavilion DV9700 with Vista Home Premium. Windows decided to do an automatic update this afternoon and I now no sound. When I move the mouse over the tray icon, I see "No Audio output device installed. It was working perfectly before this update.

  Here is what I tried (and results) and try (reason).
  I can't update the driver for a device that is not installed.
  I searched on hard disk for Conexant, audio, player, sound. Unable to find anything that will help you.
  I thought to uninstall updates... but there are about 40 of them, and there must be a better solution.

  I can not deal with no music... any advice would help.

  BTW, I already said the system can perform automatic updates, but that's another debate for another day.

  The update removed somehow the audio device. I tried to download and reinstall, but kept running into problems with the installation. My system did not create (first time I ever saw that) restore points, so I had nothing. I ended up restarting in safe mode and perform Windows Update setting, then reboot back into normal mode, and he's back.