Receive error message "the UPS service is not confiqured correctlly" when check the errorlog advanced system information

Similar Questions

• I want to add a printer, but get the error message "print spooler service does not work."

  I can't print from my computer.  This has happened with no other visible defects on the computer or the printer.

  When I use the printer in case of problem, and hit the 'add printer' link, I get the error message "print spooler service is not."

  "I did a search on"print spooler"but got no result

  Duane

  Often, but not always, the symptoms you describe are caused by a corrupt print job stuck in the queue or a damaged printer driver.  However before you clean things up, on general principles, that you can download, install, update and run full scans with each of these two free programs:

  AntiMailware MalwareBytes
  SUPERAntiSpyware

  Do not operate the two scans simultaneously.  Each will take a long time, so start it and then go do something else for a while.

  Cleaning of printers

  NOTE: If after completing step has the print spooler is not always running after you launched the command "net start spooler", you will not be able to follow all the steps in "First Article".  Instead, go to the other link and download and get and use the utility 'cleanspl' such as described here.

  If the suggestions below do not resolve your problem, after back and don't forget to include the following information:

  • The version of Windows you have, including service pack (start > run > winver > OK)
  • The brand and model of printer you have (includes the manufacturer, model and model number, as in HP Deskjet 6800)
  • How the printer is connected to the computer (parallel, USB, network, wireless, etc.).
  • It happened just before this symptom started
  • What application antivirus you have and if your subscription is up to date and has been maintained continuously
  • The full text of the error messages related to printing, without paraphrasing

  
  

  A. Clean on print jobs pending

  • Open a command prompt window (start > run > cmd > OK)
  • Type the following in the black command prompt window, and then press ENTER after each line

  net stop spooler
  del/q '% windir%\system32\spool\PRINTERS\*.* '.
  net start spooler
  output

  B. clean the old printer drivers and install the latest drivers by using the directions in One Article.  If you have (or had) a Lexmark printer, follow the instructions on the following site before installing the new drivers, as explained in its first Article: http://members.shaw.ca/bsanders/CleanPrinterDrivers.htm

• Receive error message - the user profile service has no log on. Failed to load the user profile. -How can I fix?

  I CAN NOT LOG - ON

  I AM THE ADMIN, BUT I CAN NOT CONNECT ON THE ERROR MESSAGE IS - THE USER PROFILE SERVICE HAS NO OPENING SESSION IMPOSSIBLE TO LOAD THE USER PROFILE... HOW CAN I FIX?

  Hello

  1st thing to try is the system in safe mode restore to before the problem

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not solve it read more

  read the tutorial below

  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  When you log on a Windows Vista-based or a Windows 7 computer by using a temporary profile, you receive the following error message:

  The user profile Service has not logon. User profile cannot be loaded.

  http://support.Microsoft.com/kb/947215#letmefixit

  Your user profile was not loaded correctly! You have been logged on with a temporary profile.

  http://support.Microsoft.com/kb/947242

  If you tried to log on to Windows and received an error message telling you that your user profile is damaged, you can try to fix it. You will need to create a new profile and then copy the files from the existing to the new profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

• Unable to connect to the laptop, receive error message "the user profile service failed.

  can not connect to the computer

  * original title - I can't connect on the laptop when I put in password says the USER PROFILE SERVICE FAILED THE LAGOON AND DO CAN NOT BE LOADED a *.

  Hi vincentbyrne

  
  What operating system is installed on the computer?

  You can refer to the link below and use the provided steps to identify the installed operating system.

  http://Windows.Microsoft.com/en-us/Windows7/help/which-version-of-the-Windows-operating-system-am-i-running

  
  If you are using Windows Vista or Windows 7 based computer you can see Microsoft article provided below and check if the measures help -.

  http://support.Microsoft.com/kb/947215

   

  I hope this helps.

• Receive error message: the system cannot find the specified file. C:\Windows\System32\ < LANG_NAME > \mstsc.exe.MUI when I try to use remote desktop.

  Remote Desktop error

  I use Vista Home Premium.  I used to be able to use the remote desktop connection application, but all of a sudden, it stopped working.  When I try to run it I get this message:
  _________________
  The system cannot find the specified file.

  C:\Windows\System32\\mstsc.exe.MUI
  _________________

  Does anyone have a solution to this problem?  I do not have this file into C:\Windows\System32\en-US\... but perhaps it was corrupted somehow?

  Please help me.  Thanks in advance.

  Hello

  It seems that there are a few system files that have trouble.  One of them being mstsc.exe, I wish you find spyware or infection by the virus first, before you try the next step.  Please see the sticky thread in the security forum.  MVP offers some good advice how to remove these problems.

  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/fa30853d-719a-4265-9e7b-9287567d31e3

  If everything is clean, we will try a repair installation to replace the problem files and also to ensure that other system files are good.

  The 'repair' installation (upgrade on-site) will not affect your installed programs or data.  Just make sure that you are already connected to your computer when you start the installation.  Do not boot from the DVD.

  If the installation does not start automatically when you insert the DVD, run setup.exe from your DVD player.

  • When the Setup program starts and the install now screen, click install now.
  • Note When you receive the important Get updates for installation message, click go online.
  • Click upgrade when the which type of installation you want? appears

  Please let us know if this solves the problem for you.

  Brent
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Get the error message - Installation Failure Windows Installer not installed correctly when trying to install iTunes

  Original title: Error Message: microsoft windows install not installed correctly

  I'm running on Windows Vista 64-bit.  When you try to download iTunes for my iPad2 (now!) I get an error message when you have almost finished, saying "failure of the Installation Windows Installer not installed correctly.  I've looked everywhere for help.  Tried the auto-fixit... nothing.  Cannot find on my computer to try to do a uninstall, re - install Windows Installer.  (not quite tech-y to see if this is possible or if it would even help.  Please Please someone share their expertise?  Thank you very much, C.

  Hello

  For telephone assistance from Dell, you can consult the site mentioned below:

  http://www.dell.com/support/incidents/us/en/19/Phone/PhoneTagEntry?c=us&s=dhs&cs=19&l=en.

  For more support options affect the site mentioned below: http://support.dell.com/support/topics/global.aspx/support/dellcare/contact_technical_support?c=us&l=en&s=dhs& ~ ck = nohold'a.

• Receive Error Message: "the file or the Directory/Users/owner/AppData/Roaming/Microsoft C is damaged and unreadable. Please run the Chkdsk utility.

  I get the above error message every time I turn on my computer.   In addition, all my readers bus do not work.

  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  Read the tutorial above on how to do it.

  See you soon.

  Mick Murphy - Microsoft partner

• When running scheduled report, receive error message "table or view does not exist.

  This is the first time that we play with the planning reports. We can schedule a report to base without problem, BUT when the report begins to call database packages it starts mistake. We found the package is called end but when it's a SQL query he does not know the scope of the table. For example if the code says "select * of per_all_people_f' he doesn't know what per_all_people_f. BUT if I change the code to specify the owner of the table ' select * from hr.per_all_people_f' then it will run successfully."
  
  In discoverer we have it set up so that a generic user db (DISCO_SCHEDULE) is used when running scheduled reports. I searched metalink and we run scripts of Oracles about this user setting. At this point, we think of creating a group of synonyms for tables of this error, but thought that it had to be a better way.
  
  Anyone have any ideas on how to solve this problem? Their a configuration step we missed when setting up the user db DISCO_SCHEDULE?
  
  Thanks in advance for any assistance received.
  
  Marty

  Hello

  Your problem is that you call the function hr_general.decode_person_name the DISCO_SCHEDULE user and like most HR packages, the package hr_general is defined with the current_user rights. Therefore, the package will use the privileges of the current user when the package is run.

  You can try to grant privileges to the tables to the DISCO_SCHEDULE user and creating the necessary synonyms, but you will struggle to get this working. HR packages refer to other packages and tables, and ensure that you have all the privileges that are put in place will be virtually impossible.

  Another approach is to create a view owned by APPS that makes calls to the hr_general package. You can also create a wrapper function which is owned by APPS and created with the copyright that calls the package hr_general. You can then call this package instead of using hr_general.

  Rod West

• In visual C++ 2010 Sudio type a name of boot file is error message like characters * / etc. can not be used when I don't use in the name of the project

  I create a new project in the projects and Solutions (C++) as Console Win32 Application. I enter a name for the file as proposed game and the project

  an error because there seems to be some included characters that are not allowed.  WHY there is not?

  I would say it is more lilkely a question for http://social.msdn.microsoft.com/Forums/en-us/vcgeneral/ programming forums

• Impossible to disconnect, receive error message "THE DEVICE 'GENERIC VOLUME' IMPOSSIBLE BE STOPPED RIGHT NOW"

  "I CAN'T DISCONNECT MY SEAGATE EXTERNAL DRIVE I GET A MESSAGE SAYING 'THE DEVICE' GENERIC VOLUME ' CANNOT BE STOPPED NOW, TRY THE STOP DEVICE LATER, HELP PLEASE

  Hello

  · What is the service pack installed on the computer?

  · Do you remember any recent changes on the computer?

  Follow the steps listed in the link below: problem ejecting USB Mass Storage Device: http://support.microsoft.com/kb/555665

• Error message: Printer Spooler Service does not

  Hello

  I searched all Q and has this problem but nothing helped;

  just installed new printer wireless (see screenshots below) and by following a few tips I've tried all

  .. .my under Services administrative tools does not show a printer spooler entry to set on automatic...! ?

  the scanner is recognized and works very well, but the printer does not work

  any suggestions please?

  sincere thanks

  Harry

  

  Thanks for your good advice, I found finally last Brother driver package did not expect to the new printer to come with updated installation disk... Well it is for hunting for cheap product...! :)

• While the plug-and-play was still there at all, and I tried to go I still receive error message 2. could not locate the file.

  Here's the situation.

  First of all only started to the top of my Asus to find was no sound. Following up to plug-and-play service has not started. It is now removed apparently.

  Here are the solutions I tried, in and out of safe mode:

  While the plug-and-play was still there at all, and I tried to go I still receive error message 2. could not locate the file.

  In CMD sfc/scannow reached 32%, then breaks down, saying: it finds corrupted files, but could not fix.

  It Startin via msconfig did not work.

  Tried to go through Device Manager, which is completely empty for some reason any.

  System Restore is restoring before this problem. When you attempt a restore, plug-and-play service is not returned to the existence, defective or otherwise.

  I knew, but there may be malware, mutiple scans with several services did not find anything.

  I tried to contact microsoft help and they might suggest only I have upgraded to windows 10. Tried several times, and he has failed to be upgraded, every time. For the most part just download windows 10 and then by restarting the computer as if nothing happened. Any ideas on how I can fix this?

  Hello

  Welcome to the Microsoft community. I will certainly help you with the problem you are experiencing.

  I would like to ask you:

  • You are running Windows 7 or Windows 10 on your PC?
  • When was the last time it was working fine? Remember to make changes to the computer before this problem?

  Given that you are unable to complete the scan of SFC and Task Manager is empty, usually reinstall or do a repair install is the best choice of action. However, we can try to fix these files and check if that helps. To do this, refer to the steps below:

  1. Open the start menu and type "cmd".
  2. Right-click on the command prompt and click "run as administrator".
  3. Type the following commands and press ENTER after each.

  DISM.exe / Online/Cleanup-image /Scanhealth

  DISM.exe / Online/Cleanup-image /Restorehealth

  After you run these commands, restart the system and check.

  You can also view,

  Difficulty errors of corruption of Windows by using the DISM tool / System Update Readiness

  https://support.Microsoft.com/en-us/KB/947821

  If you are using Windows 7 and have the product key for this. You try to run an upgrade in Place to fix all the corruptions.

  Refer,

  How to perform an upgrade on the spot on Windows Vista, Windows 7, Windows Server 2008 & Windows Server 2008 R2

  Hope this information was useful.

• Wireless stopped working, the error message says "this wireless does not work on this computer ' even if another computer at home has no problem with wireless services.

  My computer stopped working wireless, the error message says "this wireless does not work on this computer ' even if another computer at home has no problem with wireless services.  I've tried everything and my router is intact.  My Protection of Kaspersky flags are gone from green to red and says threats have been detected. What should I do to get back on the wireless.

  original title: Wireless not working not

  Hello

  1 have had any changes made on the computer before the show?

  2. what operating system is installed on the computer?

  Method 1:

  Check the link and try to run the troubleshooter to check if it helps.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 2:

  Try to run Microsoft Safety Scanner for any malware or spyware infection and check if it helps.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: the Microsoft Safety Scanner expires 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again. The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

• I get the error message, the Windows Installer Service could not be found, is there a solution?

  I get an error message, the Windows Installer Service could not be accessed.  This can occur if Windows Installer is not installed properly.  Is there any solution for this?  Also I can't find service.msi.  Make sure you typed the name correctly and then try again.  Any help I can get for this will be appreiated.  System restore not working anymore.  Carolyn Stallings

  Always, always, first specify what operating system you are using before you begin to explain the problem.

  Try this tutorial. It works for Vista and Win 7.

  http://www.Winhelponline.com/blog/Vista-the-Windows-Installer-service-could-not-be-accessed/

• While the installation of Service Pack 3 error message comes as "Bullxp is not a WIN 32 application.

  Original title: installation of Service Pack 3

  IAM using windows xp service pack 2 for Bull XP software. Now, I want service pack 3 to my Zune connection. I downloaded SP3 but that you can not install. Error message comes as Bullxp is not a WIN 32 application. So my question is. What is win32 application. ?  Will I get updated by the Download Center or else are up to so that I can go?

  Hello

  The error message "not a Win32 application invalid" is displayed on the Windows computers and can indicate a variety of problems. Win32 is part of the core of the Windows operating systems and programs installed on your computer must communicate with the kernel in order to work properly.

  Follow the steps in troubleshooting these KB articles and check if that helps:

  Steps to take before you install Windows XP Service Pack 3

  http://support.Microsoft.com/kb/950717

  How to troubleshoot an installation fails on Windows XP Service Pack 3

  http://support.Microsoft.com/kb/950718

  You can also post your query to the Bullguard Forum and check:

  http://Forum.BullGuard.com/Forum/