Receive series MB

Similar Questions

• accelerate the backup of data received through series

  Hello

  I hope you can give me some advice. So far, I have not found a solution.

  I have a sensor connected by USB-serial converter to the computer (COM 2). After the beginning of the measure, the sensor sends continuously data as a string. The sensor is able to operate at different speeds and it is controlled through strings sent to the device.

  Now, I have programmed a small piece of code to read and evaluate the data from the sensor. There is no problem while looking at live data in several locations. But as soon as I try to save the data, I have speed issues. The loop is not fast enough to receive the data, because it is provided by the sensor. Temporarily remove the plots and so on, don't help not, therefore the problem is data backup. As far as I know, I should use the tables that I did and I don't think that editing bays should be the bottleneck, because they should be able to manage data in general much faster.

  In the Hyperterminal with windows, the unit works fine.

  I use VISA series with a timeout of 2 s and a buffer of 128. Baud rate is set to 460800.
  The real VISA read command is set to read 50 bytes max or stop a tank of termination (line break).
  After initialization, and sending the command start for the sensor, the device starts to send its data...
  The different speeds are:
  1 - 4 strings per second
  2 - 10 per second
  3 - 100 per second
  4 - 500 per second

  Each line gets cut, evaluated and plotted. Each value is also stored in a table (which could be saved after the program stops).

  In the photo, I deleted several commands sent to the probe, because they are not relevant and it doesn't matter (of failure) if I remove them in the program or not. It goes the same for plots. After setting the device at the higher speed, the program fails, because there is more data than labview bed. (I have already said, that without the tables it works very well, I do not have it?).

  So, what can I do? I'm doing something completely stupid? Is there a faster way to collect data with labview? I mean, 500 HZ, which must be nothing.

  Thanks for your help.

  Kind regards

  HD

  PS I'm continues LabVIEW 8.6

  Computer: Intel Core2 Duo E8500 3.16 GHz with 3 GB of RAM

  SW: Windows XP SP3

  You use insert into table with each iteration and forcing LabVIEW to keep reallocation memory for the berries. It is not very effective. Instead, I advise you to use the architecture of producer/consumer and transmit data back to the consumer loop where you write the data. Shift registers and who would skip all the functions to insert it in the table. You also use local variables and property nodes. Neither one of those who are very fast either. Can't tell from the picture why those are used. Also, consider using a structure of the event for these Booleans wired for the structures of the case. Do you really need those who questioned all the time and run the code with each iteration, or do you just need them to run once when the Boolean value changes?

• Series, receive - ignore ascii CR LF \r\n codes

  Hello

  I'm reading an array of characters, including the return and line break in a chart in labview.  I receive the order then wait x milliseconds that all data has been received, and then read all the data in the buffer using the reading series.  A sequence of the example of the series of characters is as follows:

  printf ("time RTCC date\r\n35:6 c: 53\r\n0d/02/cb\r\n")

  I need to receive this exact character set and store them in a table in labview.  It seems that labview automatically breaks the reading routine when it receives the return transport or code line break.  Which, when writing to a table only gives the characters up to the power line, then replace them at closing and the receipt of the return the next set of tanks until the next newline.  Which, in this case, would require to have 3 separate tables to store all the data.  Who ends up looking like this:

  Array1 "RTCC time date\r\n.

  Array2 "35: 6 c: 53\r\n."

  array3 "0d/02/cb\r\n.

  Looks like there should be a setting to disable response to the \r\n playback function, but I can't find.  By the way, can someone please guide documentation that details of this type of functionality using the VISA?  I searched help and she gives an explanation very very superficial.  I found the VISA manual, but it only show the implementation of C code.

  Joined a VI flowing as explained.

  Thank you

  On the VISA to configure the Serial Port is an entry called 'enable a termination character '. It wire constant false.

• We have 4 CS3 design facilities std and 3 sets of CS3 and a connector series CS4. The downgrade (d) CS3 serial was lost with the crash of the PC on which it was installed. How to receive a new donwgraded CS4 CS3 serial?

  We have 4 CS3 design facilities std and 3 sets of CS3 and a connector series CS4. The downgrade (d) CS3 serial was lost with the crash of the PC on which it was installed. How to receive a new donwgraded CS4 CS3 serial?

  The PC is an installation of Windows 7 Professional 64 b NL.

  Hi,

  The downgrade isn't possible for customers Volume of the former traditional products... license for individual buyers.

  Kind regards

  Sheena

• I bought the first elements 13 and 13 Photoshop elements according to a trail. I received 1 set of serial numbers to activate Photoshop and 2 sets for first. However, after you type in the first series of numbers for the first, there was no place to type

  I bought the first elements 13 and 13 Photoshop elements according to a trail. I received 1 set of serial numbers to activate Photoshop and 2 sets for first. However, after you type in the first series of numbers for the first, there is no place to type in the second set. How can I check if the first has been correctly activated?

  You get usually just a serial number by program... a list of 24 numbers, 6 sets of 4.

  Click the icon of the program and see if it boots without asking for a serial number.

  If it is not running now, please contact support:

  To contact support, please click the link below, click on the still need help? option in the blue box below, then choose the cat. Make sure you are signed in with your Adobe ID, have cookies enabled and have deleted your cookie cache.  If you have any questions, try another browser.

  Serial number and activation support

  Guinot

• I have a Creative cloud photography Plan (CC of Photoshop Lightroom). There a serial number for registration? because I have received no series by mail, but it works well!

  I have a Creative cloud photography Plan (CC of Photoshop Lightroom). There a serial number for registration? Because I have received no series by mail, but it works well! And he never asks me to activate with a serial number. I just pay monthly Plan.

  I ask this question because I have to change the computer and I didn't have trouble disattivate App and put it on the new pc!

  Can I turn off just from the creative cloud by disconnection of the account application, uninstall the application and then install on the new pc?

  The CC has not need any number of series, it is based on an Adobe ID.

  In the case where you are prompted for the serial number then you can refer to.

  • Creative Cloud applications ask for serial number
  • Re: Incorrect serial number?

  Concerning

  Baudier

• Hi all, I was able to make the payments on CC for photoshop lightroom but never received any series don't or by e-mail.

  Hi all, I was able to make the payments on CC for photoshop lightroom but never received any series don't or by e-mail. He went to the page order and checkout then error msg please help.

  This isn't really a problem, it can present as test on site due to several reasons. If you haven't signed up with correct email address. You can also try to sign out and sign back.

  I suggest you ignore since it is the trial of posting on the Web site.

  Did you install desktop CC and CC Photoshop creative cloud desktop?

• Buffer series VISA not containing data not received all

  Hello

  I get the competition of the transmitttet of the LGRTest.txt file for my port com3 (9600n81) every second.

  Using 'VISA on event Wait function' I was supossed to read the summary after detection of a character of 0xA.

  But I get only at random parts of the 486bytes transmittet.

  In earlier versions of my code, he did receive the prize. But I discovered that it was old data stored in the buffer.

  Then I added "VISA Flush function" before wait as the chariot of the end and then I got the first problem I designed.

  Concerning

  Morten Skov

  The event to wait for the VISA is pending for ANY character to receive.  So if you check the number of bytes in the port when half of the message has been sent, you will only read half of the message.

  If you actually use the stop character, don't bother with the VISA events.  Just a reading VISA with the number of bytes to read the value something rediculously high.  Read full when it detects the stop character.

• Post-processing of the data received from series

  Hello

  I want to process the data received by Compote in labview where the transmitter unit will send 22 bytes of data in this format 0 x 01 02 <18 bytes="" of="" information="" data="" with="" lsb="" first="">0 x 0 x 03 0x0D by the Compote which must be read using Labview. I want to treat the bytes received 22 in labview as below

  (1) let the first 2 bytes and last two bytes

  (2) from the left 18 bytes each consecutive game 3 bytes should be reversed (because the transmitter sends the first LSB) and stored in a text file.

  Can anyone suggest me the steps to implement this.

  Thank you.

  You should probably disable the stop character actually because you receive binary data.  So to configure a Serial Port, you must connect in a FALSE way to enable the termination character.  Then you must read your VISA, just try to read 22 bytes.  This should keep you in sync since it is a response control facility.

• A transmitter/receiver for mouse 4000 series will work with my mouse of series 5000 and 3000 series keyboard?

  The transmitter/receiver for my wireless 5000 mouse is dead!

  If I buy a 4000 wireless mouse 3000 (from office all 5000) wireless keyboard will work on the ARVA 4000? I think I got that right!

  You guessed it right, and it depends on the brand and model.  If they specify a "unifying" receiver it will work, otherwise contact the MFR.

• DeskJet 3050 a J611 series: I received a 0XB8268688 error code and the printer is offline. How can I solve this?

  Word and Adobe tell me that the printer is offline.  I received the error code when I tried to turn the printer off.

  Hello

  Please try the steps below...

  1. While the printer turned on, unplug the power cord from the back of the printer.
  2. Turn off the wireless router.
  3. Wait 30 seconds.
  4. Connect the power cord to the printer. Look for the error.
  5. If there is ERROR, like you said, printer then needs to be REPAIRED.
  6. power on the router and look for the error. If there is ERROR, like you said, printer then needs to be REPAIRED.

  If there is NO error and the printer shows offline when printing then download and run the HP print and Scan Doctor www.hp.com/go/tools

• It is a nightmare. Absolute total nightmare. Like a fool, I went to San Luis Obispo staples and bought Adobe Photoshop elements Adobe Premiere elements 14 and 14. I have logged on to your Web site with the code redemption and received your series num

  It is a nightmare. Absolute total nightmare. Like a fool, I went to San Luis Obispo staples and bought Adobe Photoshop elements Adobe Premiere elements 14 and 14. I logged on to your Web site with the redemption code and received your serial number. Of course, he did not.  Any of you have ideas.

  What is the error message?

  It is unacceptable to permit http://helpx.adobe.com/creative-suite/kb/error-serial-number-valid-product.html

• Google is starting to roll out Android 5.0 (Lollipop)... Lenovo series of Yoga will receive the update?

  Hi all

  I see that Google has started rolling updates for Android 5.0.

  Recently I bought Yoga 2 8 inch tablet, so I was hoping if Lenovo will provide us with the new Android update?

  I hope that they should be good for us.

  Concerning

  PM

  
  

• HP printer OfficeJet 6500 E709a all-in-One series, fax is struggling to send, receive messages

  I just sent a message on the above topic, but I forgot to give my connection - what is AT & T DSL.  The "belonging to AT & T 2Wire box sits next to the printer.   I hope this helps!

  Thank you, again.

  Hi garden200,

  Can you run the fax Test and let me know if everyting goes?  See Solution 1.

• When activating the product and the number of series with windows 10 I received a message that is not connected to the internet! But I have the connection

  Hello

  Hello

  Please see the link: cloud creative activation and troubleshooting of sign-in

  Hope that helps!

  Kind regards

  Sheena