Receive the error under XP "workstation service has not yet started.

Similar Questions

• I want to add a printer, but get the error message "print spooler service does not work."

  I can't print from my computer.  This has happened with no other visible defects on the computer or the printer.

  When I use the printer in case of problem, and hit the 'add printer' link, I get the error message "print spooler service is not."

  "I did a search on"print spooler"but got no result

  Duane

  Often, but not always, the symptoms you describe are caused by a corrupt print job stuck in the queue or a damaged printer driver.  However before you clean things up, on general principles, that you can download, install, update and run full scans with each of these two free programs:

  AntiMailware MalwareBytes
  SUPERAntiSpyware

  Do not operate the two scans simultaneously.  Each will take a long time, so start it and then go do something else for a while.

  Cleaning of printers

  NOTE: If after completing step has the print spooler is not always running after you launched the command "net start spooler", you will not be able to follow all the steps in "First Article".  Instead, go to the other link and download and get and use the utility 'cleanspl' such as described here.

  If the suggestions below do not resolve your problem, after back and don't forget to include the following information:

  • The version of Windows you have, including service pack (start > run > winver > OK)
  • The brand and model of printer you have (includes the manufacturer, model and model number, as in HP Deskjet 6800)
  • How the printer is connected to the computer (parallel, USB, network, wireless, etc.).
  • It happened just before this symptom started
  • What application antivirus you have and if your subscription is up to date and has been maintained continuously
  • The full text of the error messages related to printing, without paraphrasing

  
  

  A. Clean on print jobs pending

  • Open a command prompt window (start > run > cmd > OK)
  • Type the following in the black command prompt window, and then press ENTER after each line

  net stop spooler
  del/q '% windir%\system32\spool\PRINTERS\*.* '.
  net start spooler
  output

  B. clean the old printer drivers and install the latest drivers by using the directions in One Article.  If you have (or had) a Lexmark printer, follow the instructions on the following site before installing the new drivers, as explained in its first Article: http://members.shaw.ca/bsanders/CleanPrinterDrivers.htm

• I downloaded Freecorder, when I try to open the audio portion, I receive the error message that VistaAudioLib.dll is not installed.

  I am running Windows 7. I downloaded Freecorder, when I try to open the audio portion, I receive the error message that VistaAudioLib.dll is not installed. Also, I lost the ability to transfer MP3s to iTunes and convert them. All of the suggestions. I had a virus attack and had to wipe my hard drive, and then reinstall the programs. ITunes is since that happened. Before I could copy a file from my Olympus digital recorder and make the transfer. Now, I can not drag and click between the windows.

  Thank you

  Click on this link: http://www.scanwith.com/Autoruns_download.htm download & install it. (It is a secure reliable software). You can keep it for future use if you choose.
  1. after the download is complete, select autoruns & right click on it
  2. click on "extract here".
  3. on the extracted files, click "autoruns" application select it & right click and click"Openorrun"& click OK or Yes if the process of ptompted by an administrator to complete the installation.
  4. what which is complete, Open or run "autoruns".
  5. in the opened window, click 'all'.
  6. on all programs that says 'file not found' select each & every one of them, click on one at a time...
  7 right-click & click delete & ok

  Option (2)

  Click on this link:http://www.pcerrorfixtip.com/VistaAudioLib.dll-157425.html

  He helped?

• How do you set up ADR in a Weblogic Cluster? On the second server, get "this facility has not yet been configured '...

  We currently have ADR installed 2.0.9 on WLS 10.3.6 running on Windows 2008R2 behind a F5 load balancer. When load balancing sends connections to the server, we have configured everything first, everything works fine. When load balancing sends connections to the server to scale, we get the ADR page with "this facility has not yet been configured. The defaults.xml and related directories were created automatically on the second server. We tried to change the debug.debugger and debug.printDebugToScreen entries in the second server defaults.xml, but nothing happened. What do we lack? How set us the second server?

  The problem has been resolved. After looking at the directories and defaults.xml WLS created on the server to scale out, we thought that the configuration files were not created/copied from the original server. We ran the configuration of 'java-jar ords.war setup' on the second server, restarted the application of WLS and everything started working as expected.

• In Vista, get the error logon "user profile Service has no logon. Unable to load the user profile.

  I can't logon and I get the notice.  The user profile Service has not logon. User profile cannot be loaded.
     
  PLEASE... HEEEELP.

  Hello

  1st thing to try is the system in safe mode restore to before the problem

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not solve it read more

  read the tutorial below

  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  When you log on a Windows Vista-based or a Windows 7 computer by using a temporary profile, you receive the following error message:

  The user profile Service has not logon. User profile cannot be loaded.

  http://support.Microsoft.com/kb/947215#letmefixit

  Your user profile was not loaded correctly! You have been logged on with a temporary profile.

  http://support.Microsoft.com/kb/947242

  If you tried to log on to Windows and received an error message telling you that your user profile is damaged, you can try to fix it. You will need to create a new profile and then copy the files from the existing to the new profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

• Try to change the mouse settings in Control Panel, receive the error "windows rundll.exe host has stopped working".

  When I go into the control panel to change my settings for the mouse, I get the error "windows rundll.exe host has stopped working", therefore, you cannot change the mouse settings, how do I fix it?  My mouse is out of control! :)

  * original title - why windows will not host rundll.exe I would change my settings of the mouse? *

  Hello

  If you use 3rd party mouse drivers updated or reinstall those who, like Logitech, Microsoft
  Wireless and so on.

  =================================================================

  To solve the problems:

  If your: Windows host process Rundll32 has stopped working
  http://www.WinVistaClub.com/T40.html

  What is rundll32.exe and why it works?
  http://www.howtogeek.com/HOWTO/Windows-Vista/what-is-rundll32exe-and-why-is-it-running/

  What is the suspicious Rundll32.exe process?
  http://WindowsXP.MVPs.org/Rundll32.htm

  -----------------------------------------------------

  Try these to erase corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
  program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------------

  If no joy trying to determine what is the cause:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes without doing anything - then right
  Click on taskbar - task manager - take a look at stored by - Services - process -.
  It's a quick reference (if you have a small box left - show for all users, then
  Check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see who are loading is method 2 - using MSCONFIG then after a
  a list of these here.
  --------------------------------------------------------------------

  Tools that should help you:

  Objects of process Explorer - free - find out what files, registry keys and other processes
  have open, which DLLs they have loaded and more. This exceptionally effective utility will be
  even show you who owns each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured so that it starts automatically when your
  system boots and you log in. Autoruns is also the full list of registry and files
  locations where applications can configure start automatic settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL activity
  in real time.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded
  automatically when Windows starts. For each request, the following information
  appears: product Type of startup (registry/Startup folder), Command - Line String,
  Name, file Version, company name, location in the registry or the file system and more.
  It allows you to easily disable or remove unwanted programs that run in your Windows
  startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not.
  The window Watcher says it all, every window created by all programs that are running, the statement
  If the window is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  Hope these helps.

• Black screen "service has not been started" error 0 x 80070426

  When I try to boot my system an error code is 0x80070426... then I try to make an order under cmd.exe with net start slsvc and get another error code 57346... so I tried to go into services.msc with software licenses and that doesn't work either I am so confused what to do. My home with the start menu screen is black. I also tried to do a restore system with the commands and the computer says I need a scanner I do this and the system restore is still not allowed. All this started because I did an update from microsoft last night.

  Hi ercamoo,

  Thank you for visiting Microsoft Answers.

  I suggest you try to validate your Windows license. Visit this link:

  http://www.Microsoft.com/genuine/

  If you are unable to validate your copy of Windows, then check the drive for errors.

  Follow these steps to check a drive for errors:

  1. open the computer by clicking the Start button, click computer.

  2. click on the drive you want to check, and then click Properties.

  3. click on the Tools tab and then, under check for errors, click Find now. If you are prompted for an administrator password or a confirmation, type the password or
  provide confirmation.

  To automatically repair problems with files and folders that the scan detects, select automatically fix file system errors. Otherwise, the disk check will report problems but
  not to fix them.

  To perform a thorough check, select search and attempt to recover bad sectors. This analysis tries to find and repair physical errors on the disk itself, and it may take much longer to complete.

  To check for errors file and the physical errors, select both automatically fix errors in file system and search for and attempt recovery of bad sectors.

  4. click on start.

  Check this link for more information:

  http://Windows.Microsoft.com/en-us/Windows7/check-a-drive-for-errors

  After checking the disk for errors, repeat the validation process.

  Let us know if it helps.

  Kind regards
  Cordially Afzal-Microsoft supports.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• A problem occurred when windows tried to activate - code __Error 0x80070426 Description__ - the service has not been started

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: How to fix

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  The message says: everything you need. The Windows software licensing service is not started. Start the services.msc MMC snap-in and start the software licensing service. "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• Received the error that my operating system has been installed too many times and does not allow installation.

  installs Windows is no longer permitted

  Hi, my sons computer crashed several times due to hardware problems. It resulted in windows being installed several times. He just had a disk crash and after installing a new disk, windows indicate that the key has been used repeatedly, not allowing an installation again. How can I fix it?

  Use the Activate by phone and speak to a live operator.

  Activate by phone

  Click the Start button
  in the search box, type
  SLUI 4
  and press the Enter key
  Follow the instructions - but when asked which service you need the ansafone phone, don't answer - it should oblige the operator to answer, who can deal with you.

• Receive the error under XP on c:/windows/npodicng.dll

  Please advise me on what the message said and how I can rectify.

  c:/Windows/npodicng.dll

  It is always sensible in this situation to achieve a malware check

  Start the computer in safe mode with network and download and install Malwarebytes (free version for individuals only), updated definitions and run in safe mode. Disable other security software while you do the analyses.

  http://www.Malwarebytes.org/

  Download and run SuperAntiSpyware (Free Edition)

  http://www.SUPERAntiSpyware.com/download.html

  Some malware is installing the entries of proxy server redirecting internet connections. If you encounter this problem step 2 see in the following link:

  http://www.myantispyware.com/2011/02/21/how-to-remove-Internet-Security-Essentials-virus/

• Receive the error message"MFC-7860DW LAN is not found" when scanning

  Original title: printer all-in-one Brother MFC-7860DW after Windows update problem

  Shortly after that I installed an update through Windows for my Brother multifunction printer, I could not scan documents to my printer wireless to my Toshiba laptop.  I got an error message saying "MFC-7860DW LAN is not found."  Yet the wireless connection between the printer and the router is fine, and I can print from my computer very well also.  I did this for a long time so I have something had happened recently.  The update was allegedly from brother.  I spoke with the brother support and they gave me a way to scan the computer using Windows Fax & scan, but I really need to be able to make it from the printer itself.

  I have reset the PC to a restore point before that I did the update of Windows, and I uninstalled and reinstalled the software of the printer 3 times, including the connection with the wireless system, all without effect.  When I check the Brother Installation Diagnostics file, it shows that the scanner driver has no installation and connection.  All the other drivers installed correctly.

  Any ideas how to install my scanner driver?  Thank you!

  Try Ronald ron's response

  Altho, reg cleaner ccleaner can erase valid entries reg sometimes. So, I don't know if I would use that

• The error that says "this application has failed to start because sqlite3.dll (also sqlite3.prepare.v2) was not found. Reinstalling the application may fix this problem.

  These messages appear, one after another, at startup.

  Something you have running at Windows startup that uses SQLite is a failure. Find out what this program is (so you can stop it) by managing your Startup:

  Start > run > msconfig [Enter]

  This will open the System Configuration utility. Look under the Startup tab and find the likely culprit. Uncheck the box next to its name, apply and OK out. You don't need to restart immediately, but next time you do, you will get a dialog box saying that you have used the utility. Just check the box that says in effect, "don't mind to this subject again".

  Important - do not use the System Configuration utility to stop the process. Use rather Start > Run > services.msc [Enter] and stop all services unless you really, really know what you're doing.

  How to troubleshoot by using the Msconfig in Windows XP utility - http://support.microsoft.com/?id=310560
  The free Autoruns program is very useful for managing your Startup - http://www.microsoft.com/technet/sysinternals/default.mspx MS - MVP - Elephant Boy computers - Don ' t Panic!

• During the installation of a program, receive the error message that Windows Installer is not installed properly on Vista

  I tried to install a program and I got an error message that says "Windows Installer" is not installed correctly and I need to contact the support staff.  I get also a message when I log that says steetings.ini is occupied by another program and it will not allow the sidebar to come.

  Try the Windows Installer Cleanup utility to troubleshoot the problem with Windows Installer:http://www.softpedia.com/get/Security/Secure-cleaning/Windows-Installer-CleanUp-Utility.shtml.

  For the issue of the Sidebar, do a boot minimum http://support.microsoft.com/kb/929135.  If the problem goes away then it's just a matter of tracking down the culprit at the origin of the problem.   Follow the procedures described in the article.  Once found, remove, delete, disable or uninstall.  Once remember to put Vista in normal status, as described in the procedures. If the problem occurs in clean mode then just restore the system to normal and reboot - this solution will not work.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Receive the error message "your current configuration does not allow this file to download.

  Original title: Windows Defender security problems?

  Anyone know how to bypass Windows Defender to allow viewing of websites or certain parts of a website? I don't want to turn off Windows Defender, but working around him. Whenever I go into a subcategory of my University web site, I get a message that reads as follows: 'your current configuration does not download this file'

  I don't want to download the file, just to see the link that are associated with.

  Thanks to all those who know well that to answer.

  Hi Eric,.

  Thanks for posting your question on the Forum of the Microsoft community.

  I would be grateful if you can provide us with the following information to help us better understand the issue.

  1. Could you please provide the names of a few websites that is blocked?
  2. Have you tried to open these websites of all other browsers? If yes was the result even?
  3. How are you sure that these sites are getting blocked by Defender?

  According to the description of your problem, it seems that you are unable to open some websites, then, there may be a chance that the site is not compatible with Internet Explorer. So I suggest to open these websites in compatibility view and see if it helps.

  • Open Internet Explorer..

  • Open Web site which is getting blocked.

  • To open the toolbar, press the alt key pressed .

  • Now, click on Tools.

  • Then click on compatibility view settings.

  • You will see the name of the Web site under Add this Web site, to do this, click Add to add this Web site.

  • Close the window and restart your computer.

  If the problem persists, try to trust these websites by following the steps mentioned below.

  Step 1: Open the trusted sites

  1. Open Internet Explorer.
  2. Press the Alt key to display the Tools menu.
  3. In the menu, click Tools.
  4. Now, click on Internet Options.
  5. Click on Security tab.
  6. Select Trusted sites.
  7. Click the Sites.

  

  Step 2:

  Add the trust Web site

  1. Enter the address of the site you want to add.
  2. Click on Add.
  3. Close the open windows of Trusted Sites and Internet Options .

  

  Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

  Thank you.

• Receive the error message"Windows Media Player is not installed correctly and must be reinstalled. "

  * Original title: Windows Media Player

  I recently updated my Windows 7 and now my Windows Media Player will not work.  The following message appears: Windows Media Player is not installed correctly and must be reinstalled.

  I don't see where I can download the Windows Media Player for Windows 7.  Any help would be appreciated.

  If you have a ' normal/standard' Windows 7 version, then see if it deletes, reboot, reinstall, reboot the help method - http://www.howtogeek.com/howto/26107/how-to-reinstall-windows-media-player-in-windows-7-to-solve-problems/

  If you have the "n" or "KN" W7 version, you may need this - http://www.microsoft.com/en-us/download/details.aspx?id=16546 (check that is correct for your version 32/64 bit W7 etc link)

  If this does not help, try a SFC/scannow, and then try to use the above for your type of windows. -SFC https://support.Microsoft.com/en-us/KB/929833