Receiver error message: 'due to unidentiferd problem windows can not display fire wall settings' and windows cannot display the firewall settings.

Similar Questions

• When trying to see if my firewall is turned on it says because of unidentified problem windows can not display the firewall settings

  When you try to see if my firewall is on his telling me because of an unidentified problem windows can not display the firewall settings

  Hello
  If you are having problems turning on Windows Firewall, follow the instructions on this page: http://support.microsoft.com/mats/windows_firewall_diagnostic/
  Here are the instructions for error messages: error 0 x 80070424 or error of 0x8007042c
  I hope this helps you.
  Brian

• I get this error message with my DVD player: "Windows cannot start this hardware device because its configuration (in the registry) information are incomplete."

  I get this error message with my DVD player: "Windows cannot start this hardware device because its configuration (in the registry) information are incomplete." I tried to reinstall the driver when the computer prompted me to do it, but there was an error with this as well. My computer will not all read the disks.

  Original title: Matshita DVD-R UJ 890

  Hi AJordanMiller,

  Try these methods.

  Method 1

  Run the fix - it from the link below.

  Hardware devices not detected or does not
  http://support.Microsoft.com/GP/hardware_device_problems

  Method 2

  See the help article:

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.Microsoft.com/kb/314060

  Registry warning: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  It will be useful.

• can not display the webpage error something about the Server internal and 500 are down for maintenance

  can not display the webpage error something about the Server internal and 500 are down for maintenance? Yahoo search option and can get to Web site but trying to post comments online and get this message.  tried to restart and got the same answer.  Just set Windows to update when I logged on tonight.

  Hi ginnypierson,

  Thanks for posting in the Microsoft community.

  I understand that you are facing the issue with can not display the webpage and you are wrong about 500 and internal server being down for maintenance.

  Before you start the troubleshooting steps, I need the information required

  1. what web browser do you use?

  2. have you made any changes to the computer?

  3. this problem occurs only with the particular website?

  Method 1:

  If you use Internet explorer, I suggest you to see link and check.

  Get help with the Web site (HTTP error) error messages.

  http://Windows.Microsoft.com/en-us/Windows-Vista/get-help-with-website-error-messages-HTTP-errors

  Method 2:

  I suggest you to see link and check.

  How to optimize Internet Explorer

  http://support.Microsoft.com/kb/936213/ro

  WARNING: Reset Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings

  Please follow these recommended steps, review the additional information provided and after back if you still experience the issue. I will be happy to provide you with additional options available that you can use to get this resolved.

• Windows cannot start the firewall service.

  Original title: my firewall stopped working and it won't let me turn it back on.

  My computer has alerted my that my firewall was off this morning. The alert came with the possibility to reactivate after having used the option of tis, another box emerged stating that it cannot be turned on again and try to activate it manually. I tried to turn it on manually and it still doesn't work. He is said to be the first "Windows Firewall settings cannot be displayed because the associated service is not running. You want to start the Windows Firewall Service? "after you press 'Yes', it says"Windows cannot start the firewall service. No error message is given. Any ideas?

  Hey, bed,.

  File system (CFS) auditor scan and see if it finds a breach of integrity. If so, System File Checker will try to replace missing or damaged files.

  Information available at:

   

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I have a problem connecting the Netgear model No. RPV3000 Extender. So I can not see my network_EXT computer and therefore cannot link to this Netgear

  I'm AT & T PACE router connected to Internet. However, I have a problem connecting the Netgear model No. RPV3000 Extender. So I can not see my network_EXT computer and therefore cannot link to this Netgear. I tried to use another network with the name of my network_ext and provide the same passkey that my router, but it was impossible to connect to the Extender.

  I would appreciate it, if I can get any suggestion/help to bind and connect to this extension of NETGear. I have WIndow7 system on my computer.

  Thank you

  Harshad João

  First, make sure that the netgear device is not a router.  An Extender is very good.  You can't have more than one router in a network.  Also make sure that if you use the router wireless integrated into your modem, the router ONLY in use.

  There is a very specific configuration for the Extender.  It should have come with detailed instructions.  If you can't find them, call Netgear for assistance.

• "Receive error message" due to an unidentified problem, Windows cannot display WIndows firewall settings "when you turn the Windows Firewall

  Original title: how to enable the Windows Firewall?

  How can I activate the Windows Firewall?

  When I click on it in the Control Panel, I get a message that says "Due to an unidentified problem, Windows cannot display WIndows firewall settings".

  I use Microsoft Essentials antivirus.

  Hi Tom,

  A firewall is software or hardware that checks information coming from the Internet or a network. The firewall blocks the information or allows information to pass to your computer. If the information is blocked or passed through depends on your firewall settings. A firewall can prevent malicious software (such as worms) to access your computer through a network or the Internet. A firewall can also help stop your computer from malware sent to other computers. Windows XP, Windows XP SP2 and Windows XP SP3 includes firewall software.

  Perform the steps from the link below and see if it helps.

  How can I turn on or turn off the firewall in Windows XP Service Pack 2 or later versions?

  Hope this information helps.

• RootKit/Malware/Virus problem - windows cannot access the specified device file or the path, you don't have permissions

  Hello

  I have a problem with my computer it has been infected by a virus that is not visible in normal mode. It prevents running any application that would help in the detection and removal. I tried running mrt, mcaffe, trendmicro rootkit detector rootkit detector, spybotSD, analysis windows Defender online Windows live onecar. All these works for a minute and then shutsdown, when I click it again I get the error, as mentioned in the title, 'windows cannot access the specified device file or the path, you do not have permissions.

  This problem has a solution or re - install is the only way out?

  The pointers/help appreciated.

  Just to add, I am able to connect using my last known good configuration and only safe mode configurations.

  Thank you

  Id2View,

  1. follow all the instructions in this thread: How to get rid of malware

  2. If still no joy you can find Microsoft MVPs and other trained analysts on the following support sites:
  Aumha.org
  Atribune.org
  SpywareHammer
  BleepingComputer
  Safer-Networking

  3. If you need help with virus-related issues, contact the Support Services Microsoft product.

  To support the Canada and the United States, call toll-free (866) PCSAFETY (727-2338).

  For support outside the United States and the Canada, visit the page Web of Product Support Services.

  4. If you need more assistance for the position of the newsgroup Microsoft - security - virusvirus/worm.
  Through your News Reader:
  News://msnews.Microsoft.com/Microsoft.public.Security.virus
  Via the Web:
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Security.virus

  Hope this helps,

  Vincenzo Di Russo - Microsoft MVP Windows Internet Explorer, Windows Desktop Experience & security - since 2003. ~ ~ ~ My MVP profile: https://mvp.support.microsoft.com/profile/Vincenzo

• SD card reader problem: "Windows cannot load the driver for this hardware device because a previous instance of the device driver is still in memory. (Code 38) »

  I can't get my Dell Insperion to recognize a second SD card. It will recognize a card inserted in the integrated housing initial, but later maps not be recognized.  If I restart the computer then it will recognize a card again.  I get the following error message "Windows cannot load the driver for this hardware device because a previous instance of the device driver is still in memory. (Code 38) "your help would be appreciated.

  SD memory card

  Device type: hard drives

  Manufacturer: generic

  Location: SDA Standard compatible SD Host Controller

  Error message: Windows cannot load the driver for this hardware device because a previous instance of the device driver is still in memory. (Code 38)

  Driver provider: Microsoft

  Driver date: 2006-06-21

  Driver version: 6.1.7601.17514

  Digital signer: Microsoft Windows

  Driver details

  C:\Windows\System32\drivers\partmgr.sys

  C:\Windows\System32\DRIVERS\sffdisk.sys

  C:\Windows\System32\DRIVERS\sffp_sd.sys

  File version: 6.1.7600.16385 (win7_rtm.090713 - 1255)

  If you try to insert two cards at the same time that would be normal given that the card reader is bound to a single channel of USB. It all depends on how your computer has been configured when it was built.

  If you remove the first card and insert another card it is possible that you are not just right-click on the map in file Explorer and ejecting the card before you remove them.

• Gets the error message that says non-genuine Windows, also lost the internet connection when installing Windows 10

  Original title: windows 7 Home premium product...

  I have a dell studio 1737 and was upgraded to windows 7 Home premium 32-bit. I was installing windows 10 when we lost the internet connection and now I get an error message on windows is not genuine. can someone help please!

  Use your Windows 7 Home Premium product key to activate it.

  Windows 7 is pre-installed on my computer, How can I find the product key?

  The product key is located on the COA sticker attached to the bottom of your laptop or in the battery compartment. In rare cases it can be found also in the memory compartment. For systems of the Tower, look at the top or the side of the system unit. It looks like the following:

  

  Click Start > settings > Update & security > Activation > change product key and then enter the new product key, and then click Next to activate

  If you cannot activate Windows 10 after all the above and you are sure that you have the correct edition installed, then please try phone activation:

  Activate your Windows 10 license with Microsoft Chat support

• Get the error on everything I click on: Windows cannot access the specified device, path or file. You can not have the appropriate permissions to access the item. Can not open the downloaded files. Help!

  IM about to set fire to this laptop... I tried to set permissions which is what I read as a solution, but none still having the same problem.  I have a click with the right button on my c drive to try to get everyone is listed as having control over the files and click ok, still the same problem.  What is the result of a virus? I try to open things Ive downloaded using safari (Safari is the only browser to work of all those that I have) a file has been moved he says... moved where? To heaven? I don't know where to start to try to solve this problem, because if I can't open downloads what's the use? Should I wipe out completely and put another OS (for example, Linux Mint lol), or is it a simple solution, I'm missing somewhere? I really hate his terrible Vista. If I could download Linux Mint I and destroy this sucker. If someone knows a way to fix even one of these questions than id be tickled s*@#$less... Thanks for reading my rant.

  Hello

  Unless you have an idea, when it started and what changes have been made before the appearance of this problem (and by changes it could be software installation/uninstall, update existing software, make changes, etc), you should probably do a reinstall. If you have a Vista disc to the same level as the current installation, insert it and follow the instructions for an inplace upgrade. If you have a system pre-installed with recovery of manufacturer, follow their instructions.

  Randomly change file permissions should not solve your problems.

  Linux is a viable alternative, but it may suffer corruption as well, and you will probably find a real support to fail.

  Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

• WANT TO UPDATE MICROSOFT - MET PROB - WINDOW CAN NOT DISPLAY THE PAGE, I'M LOOKING FOR--

  Update microsoft window-

  PorB met

  cannot display the p

  age, I'm looking

  http 404 error

  Hello

  1. are you referring to Windows Update?

  2. what version of Internet Explorer is installed on your computer?

  The Web page is not found (HTTP 404 error) If you are using Internet Explorer, this error message is due to if Internet Explorer is able to connect to the website, but the webpage cannot be found. This error is sometimes caused because the webpage is temporarily unavailable or that the Web page has been removed.

  Note: If you are unable to access Windows update Web page, then I suggest you try the following steps.

  Add the Windows Update Web sites to the trusted sites zone in Internet Explorer.

  a. start Internet Explorer.

  b. on the Tools menu, click Internet Options.

  c. click on the Security tab and then click on Trusted Sites.

  d. click Sites.

  e. Click to clear the requires a secure server (https :) for all sites in this zone check.)

  f. in box add this website to the zone, type each of the following Web site addresses and then click Add:

  § https://*.microsoft.com

  § https://download.windowsupdate.com

  § https://update.microsoft.com/windowsupdate

  § http://*.update.microsoft.com

  § https://*.update.microsoft.com

  § http://download.windowsupdate.com

  g. click closeand then click OK.

  h. visit the Windows Update Web site or the Microsoft Update Web site.

  Note: For "Internet Explorer cannot display the webpage" error I suggest you refer to the steps in the following Microsoft article.

  Internet Explorer cannot display this webpage: http://support.microsoft.com/kb/956196

  Notes:

  Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

  Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Clean boot Once you have completed troubleshooting, re-enable all services to reset the computer as usual.

  System Restore When you restore the system to a previous state, any programs or updates that have been installed since that date will be removed.

  Keep us updated on the status of the issue.

• HELP blackBerry Smartphones ~ can not display the menu in the list of messages

  I don't know what happened, but while in a list of messages, I can't see the menu when I press the menu key. I can not open emails or texts either. The watch hourglass but I never get to see the text on the next screen. It seems that something is locked but I can't find the "secret code" to unlock it, ha, ha.

  I hope that someone else may have had this problem and can help me to fix it.

  Thank you very much!

  Have you tried resetting the device? Remove the battery when the device is turned on... and then check the issue.

• When starting, receive error message "BM83b_2190.exe has caused windows to stop working.

  When I boot up I get the above mentioned error box. can someone tell me what this means and how to fix it?

  * original title - BM83b_2190.exe caused windows to stop working. What is - this? *

  Hello

  • How long you have been facing this problem?
  • What were the changes were made until the problem occurred?

  I recommend you perform the clean boot.
   
  Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.
   
  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:
   
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
   
  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

• Receive error message: \Tempory Internet Files\Content.IE5 application not found, trying to open the compressed programs.

  Original title: \Tempory Internet Files\Content.IE5 application not found

  Trying to open the program zipped have WinZip installed.

  Get this or a similar message: C:\Users\David J Lewis\AppData\Local\Microsoft\Windows\Temporary Internet Files\Content.IE5\name of the program

  Help, please.

  Hi David,

  1. are you trying to open the file using open with and choose Winzip?

  2. have you already download the file using Internet Explorer?

  3. what version of Windows operating system do you use?

  This can occur if the location of the temporary file is missing or damaged.

  If you have downloaded the file, and then try to re - download it again by changing the location to download the file and see if it helps.

  You can also try to save the file on the desktop and check if you can open the same without any problem.

  Hope the helps of information.

  Let us know if you need help with Windows related issues. We will be happy to help you.