Receiver error message: "" Ultra driver would need UM_EMDL. "» "DLL", printer installation.

Similar Questions

• I have an error message of "there is no browseui.dll. Installation of the file may correct the problem. »

  I have an error message of "there is no browseui.dll. Installation of the file may correct the problem. "I have no office and nothing showing where would the office.  Help, please! I ran a spyware/malware pogrom, but no help.  I tried the "command Prompt" and %windir%\system32 using the cd but did not work.  I also used a DLL problem progrm difficulty but no help.  I'm running Vista SP2 and have no taskbar, no start menu and nothing shows up on the desktop.  I can get on the internet, but in a roundabout way.  I tried several solution on the Microsoft web site, but no help. I did a restore but no help.  I don't want to lose all my photos and documents HTML if possible.

  Hello
  Thanks for your reply but I had tried the System File Checker with no luck.  Finally, I replaced the hard drive, because after several attempts, I reached a point where I had the format of hard drive, but the main area where all my data were not could be formatted. I think a virus may have lock me up.
  To date, May 22, 2012 the system works with the new hard drive.

  Thanks to everyone who gave suggestions.

• Olympus VN - 480PC Digital Voice Recorder Media Player not working, receive error message: "no driver file found." » »

  Original title: Olympus VN - 480PC Digital Voice Recorder Media Player

  I recently bought a new computer from DELL (Inspiron ONE 2320 with Windows 7) desktop and I connect my Olympus VN-480PC Digital Voice Recorder Media Player with the PC (to download recorded files), but it does not work... "no driver not found file.." After some trial and error I find Olympus webbsite and find appropriate... but then it won't... they have a problem at Olympus and cannot deliver a driver file... I tried 2 or 3 times in the last 6 hours... what to do? Can tell you Ms them the probem? Thanks in advance...

  Hello

  Are you running the 64-bit or 32-bit operating system?

  If you use the 64-bit operating system, you can try to download and install the drivers from this link and check that it works.
  http://www.olympusamerica.com/cpg_section/cpg_support_downloads.asp?ID=1175&OS=w

  If the problem persists, please contact Olympus. As they develop device drivers for their hardware, they can help you with this problem.

  http://www.Olympus-IMS.com/en/support/

• Receive error message: "C.\windows\system 32\TAPI32.dll" is not designed to run on Windows at startup.

  original title: how to fix "C.\windows\system 32\TAPI32.dll".

  When starting, I get a message saying "C.\windows\system 32\TAPI32.dll is not designed to run on Windows or it contains an error.  Try to install the program by using the original installation media or contact your system administrator or support software provider."  What can I do to fix this?

  Hello

  You did changes to the computer before the show?

  Method 1: Follow these steps and check if that helps.

  Step 1: Try to boot in safe mode and check if the problem persists. Check out the following link to start the computer in safe mode.

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Step 2: If the problem does not occur in safe mode then, restart the computer in clean boot in order to check whether a third-party program is causing the problem. To configure your computer to clean boot follow the link

  http://support.Microsoft.com/kb/929135

  Note: When you are finished troubleshooting, follow step 7 article to start on normal startup.

  Method 2: I suggest that you can exercise SFC scan and check if TI the problem persists. To do this, please see the following article. The SFC/SCANNOW command. analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  For more information how to make SFC / scan, please follow this link:

  http://support.Microsoft.com/kb/929833

• Receive error message "cannot find volume of extraction" during the installation of products of microcoft"

  When I download... NET or windows install it downloads fine but when I click Run to install I get "cannot find volume of extraction" make sure you have the right permission. This does.nt occur on all facilities but it is in the Sub microsoft windows update installs and direct installs the Center.ce to download just started a few weeks ago and I tried everything in my power to correct without result.

  * original title - what is and solution to "cannot find volume of extraction" during the installation of products of microcoft? *

  Hi howardchampion,

  Please see the thread with a similar problem and fix possible:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_install/i-am-trying-to-install-Microsoft-Silverlight-and/920f7b7a-E926-47B5-acc4-e8dfbc548696

  I hope this helps!

• After changing hard drives, I get an error message that says: I need a full version disc windows genuine

  Original title: replacement hard drive configuration issue

  My hard drive crashed and I can't access anything anyone on this subject. I have a second hard drive that was used for additional storage only. I'm doing this second walk my master drive. After changing the cables, jumpers, the bios settings to show as the master I am using the Windows XP disk, I try to put in place. I get an error message that says: I need a full version disc windows genuine, not a disc to upgrade to. When I bought the computer it came with Windows ME preinstalled and there was no disk that came with the machine. When I went to XP apparently, I bought a version upgrade, not the full version. Is it possible to get a cd of microsoft, or download a file, which can help get this another hard drive mounting correctly?

  Thank you

  Jeff

  Hello

  Since you have changed your HDD, I would contact the Microsoft product activation center to get on your version of the operating system. Visit the link that provides the phone number of the same below:

  http://support.Microsoft.com/kb/950929

  See also: http://support.microsoft.com/kb/811224

• Receive error 1327.Invalid Drive: H:\ installing Pinnacle Studio 14 download. __

  Receive error 1327.Invalid Drive: H:\ installing Pinnacle Studio 14 download. I have Pinnacle Studio 12 installed. Pinnacle response: you receive the error message is not an error of Studio, but a Microsoft error message. This problem may occur if a registry key contains an incorrect value in a data field. The best thing to do in this case is to contact Microsoft and they should provide a solution for this error: www.microsoft.com.  I found where this issue occurred with some Microsoft products, installation, but do not know how to fix once I get into the registry editing.

  Can someone help me please?

  Hello kthatgms,

  Click the number of the KB article to bring up the following article.
  KB Article ID: 327763 -you receive an "Error 1327. Invalid drive"error message when you try to install Office 2000

  He mentions Office but it should be the same for any program that you are trying to install.

  Please reply back and let us know if this can help.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Windows Media Player cannot burn CD - R music. Worked fine until today. C00D10BA received error message. Windows media player cannot find the file. He said to repair or remove a link.

  Can't burn music CD - R. Worked fine until today. C00D10BA received error message. Windows media player cannot find the file. He said to repair or remove a link.  What is an easy way to find and fix this? I know little about the links and need a simple way to fix... Thank you!

  Hello

  You got the C00D10BA error message when you use Windows Media Player. The following information
  might help you solve the problem.
  http://www.Microsoft.com/windows/windowsmedia/player/Webhelp/default.aspx?&mpver=11.0.5721.5260&ID=C00D10BA&ContextId=89&OriginalID=C00D10BA

  Don't forget to click on the four " + " to see more help.

  Support for Windows Media Player
  http://support.Microsoft.com/ph/7763

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• When I try to delete some folders, an error message appears saying 'you need permission SYSTEM to make changes to this file.

  original title: require authorization of the SYSTEM

  I decided to do a clean install of the latest Windows 7 RC yesterday and today crossed and have started to remove some programs on a separate hard drive so I could reinstall their own.  However when I try to delete some folders, an error message appears saying 'you need permission SYSTEM to make changes to this file.  I am using an administrator account, but I can't just simply delete the file.  I tried going to and change the owner to my account or administrators, close it, change the security permissions to allow me to have full control, and then I can finally remove it.  The problem is, I have to do for all the files one by one in the folder, and I wonder if there is an easier way to go about this, or if I can access the user of this SYSTEM and just delete them all from there.  Thanks for the help.

  Hello

  Not trying to resurrect the old discussions, but I'll answer anyway because this thread came on top of the list of search results when I searched for "you need permission to the SYSTEM; I hope this will help everyone.

  Note: here, "the record" as a subject refers to the folder that you want to remove.

  Step 1: Go to the built-in Administrator account, you can do so by following these steps:
  a. go to control panel > system and security > administrative tools
  b. on the left panel, go to local users and groups > users. You should now see a list of users on your computer
  c. right click on the administrator account that appears in the list and select Properties
  d. uncheck "account is disabled" and confirm by pressing OK

  Step 2: Connect to your newly activated administrator account

  Step 3: Now, we start to configure the security settings that will allow you to remove this folder which was (perhaps) held by the SYSTEM:
  I'm going to make the assumption that you want to remove a folder and all its subfolders along
  a. right click on the folder
  b. go to the security on the top tab
  c. click on the Advanced button which is at the bottom

  : Step 4 the first part to configure security settings to set the owner of the folder:
  a. go to the owner on the top tab
  b. click the button change located downstairs
  c. There should be a list of accounts to choose to change the property, this is located under the label "of a change in ownership:'"
  (d) the entry 'Administrator (YOURCOMPUTERNAME\Administrator)' should be there; If this isn't the case, then add it to the list:
  -Click on the button "other users or groups...". "who's down
  -Under the label "enter the object name to select (examples):', there should be a text field you can type into it;" type in "Administrator" (without the quotes of course)
  -Click on the "Check names" button which is located on the right. 'Administrator (YOURCOMPUTERNAME\Administrator)' should now be there _For itself_; Well, if not, then you must remove the line that does not represent the administrator account that you are currently
  -Confirm by pressing OK; It will now appear on the list of accounts, you can choose from
  e. now, select 'Administrator (YOURCOMPUTERNAME\Administrator)' from this list
  f. check 'Replace the owner of subcontainers and objects' to propagate our change
  g. press OK to confirm. a message should now pop-up window, which says to re - open the properties. Do by pressing all the buttons OK see you

  Step 5: now that we have the owner of the folder, we still not done. There is one crucial step left which is to remove permissions inheritable:
  a. Repeat step 3 to learn to re - open properties and get to "Advanced security settings"
  b. go to the permissions on the top tab
  c. click on the button "Change permissions" which is down
  d. at the bottom, there should be 2 check boxes:
  -' Include the permissions that can be inherited from the parent to this object': deselect this. When you do so, you will get a warning on the parameters of parent is not not able to spread. Select 'Add '.
  -' Replace all permissions of child object with permissions inheritable this object': check this
  e. press OK to confirm. Windows will warn you this time; Click OK
  f. reconfirm by pressing OK; now, you should get to properties again

  Now, you shouldn't have all the warnings about the SYSTEM do give you permission as he attempted to perform actions on this issue.
  All the boxes to change the permissions on the accounts (properties > Security > Edit) must now be enabled, and you can tinker around with it.

• While the plug-and-play was still there at all, and I tried to go I still receive error message 2. could not locate the file.

  Here's the situation.

  First of all only started to the top of my Asus to find was no sound. Following up to plug-and-play service has not started. It is now removed apparently.

  Here are the solutions I tried, in and out of safe mode:

  While the plug-and-play was still there at all, and I tried to go I still receive error message 2. could not locate the file.

  In CMD sfc/scannow reached 32%, then breaks down, saying: it finds corrupted files, but could not fix.

  It Startin via msconfig did not work.

  Tried to go through Device Manager, which is completely empty for some reason any.

  System Restore is restoring before this problem. When you attempt a restore, plug-and-play service is not returned to the existence, defective or otherwise.

  I knew, but there may be malware, mutiple scans with several services did not find anything.

  I tried to contact microsoft help and they might suggest only I have upgraded to windows 10. Tried several times, and he has failed to be upgraded, every time. For the most part just download windows 10 and then by restarting the computer as if nothing happened. Any ideas on how I can fix this?

  Hello

  Welcome to the Microsoft community. I will certainly help you with the problem you are experiencing.

  I would like to ask you:

  • You are running Windows 7 or Windows 10 on your PC?
  • When was the last time it was working fine? Remember to make changes to the computer before this problem?

  Given that you are unable to complete the scan of SFC and Task Manager is empty, usually reinstall or do a repair install is the best choice of action. However, we can try to fix these files and check if that helps. To do this, refer to the steps below:

  1. Open the start menu and type "cmd".
  2. Right-click on the command prompt and click "run as administrator".
  3. Type the following commands and press ENTER after each.

  DISM.exe / Online/Cleanup-image /Scanhealth

  DISM.exe / Online/Cleanup-image /Restorehealth

  After you run these commands, restart the system and check.

  You can also view,

  Difficulty errors of corruption of Windows by using the DISM tool / System Update Readiness

  https://support.Microsoft.com/en-us/KB/947821

  If you are using Windows 7 and have the product key for this. You try to run an upgrade in Place to fix all the corruptions.

  Refer,

  How to perform an upgrade on the spot on Windows Vista, Windows 7, Windows Server 2008 & Windows Server 2008 R2

  Hope this information was useful.

• I received a phone call from a 'windows teammember' claiming that Windows had received error messages.

  Someone called me suddenly claiming to be with Windows. He said that Winows had received error messages from my computer on the unnecessary files downloaded on my computer, and offering to help me remove... If I give him remote control.   It's for real?  Someone else make that call?

  Many people have had these criminals call them.  I guess that you have hung up on them.

  Microsoft never call someone out of the blue and would not have the necessary information to do so, even if they wanted to.

• Received calls from Microsoft saying that I received error messages. I have phone #.

  Received phone call telling of Microsoft and they were receiving error messages. I have his phone number of caller ID.

  Hello

  It's a scam.

  Microsoft does not contact you unless YOU have made prior arrangements with them to do.

  There is an article in the link I'm you provide at the end of this one

  Read this Information from Microsoft:

  "Avoid scams to phone for tech support.

  http://www.Microsoft.com/security/online-privacy/avoid-phone-scams.aspx

  Don't be fooled of unsolicited calls. Don't provide personal information.

  Here are some of the organizations that cyber criminals claim to come:

  • Helpdesk Windows

  • Windows repair center

  • Microsoft technical support

  • Microsoft technical support

  • Windows Support Group Technical Department

  • Microsoft Research and Development Team (team of Microsoft R & D)

  Either these so-called "Microsoft" Tech companies want to sell you a worthless software, or remote access to your computer to try to steal your credit card and bank information and also achieve an identity theft on you.

  See you soon.

• Error message: the drive or the UNC share, you have selected does not exist or is not accessible. Please select another. While trying to install Skype

  Original title: Error Message: the drive or UNC share, you have selected does not exist or is not accessible. Please select another.

  Is there anyone who knows a solution for this error?  It occurs during the installation of Skype, in any version.

  Hello

  Have you tried the troubleshooting steps?

  Visit the link dealing with the similar question below.

  http://Forum.Skype.com/index.php?showtopic=327241

  For help I recommend you contact Skype support team as the problem is related to Skype.

• Which drive would need a upgrade, not a clean install? Thank you

  Separated from this thread.

  Which drive would need a upgrade, not a clean install? Thank you

  Windows 7 is not free; you have to buy.

  Microsoft sells more Windows 7; Try Amazon.com.

  And Yes; This is an upgrade path. (see information below)

  @@@@@@@@@@@@@@@@@@@@@@@

  This offer is free years; long expired.

  How does the Windows 7 upgrade Option?

  The Windows 7 upgrade Option is available through participating PC manufacturers on some PC and Microsoft on any purchase of packaged product Windows Vista. The Windows 7 upgrade Option applies to Windows Vista Home Premium, Business and Ultimate editions. Your upgrade to Windows 7 will be the comparable version: so you will get either Windows 7 Home Premium, Windows 7 Professional (upgrade to Windows Vista Business) or Windows 7 Ultimate, respectively. The Windows 7 upgrade Option program works on June 26, 2009 through January 31, 2010. Some manufacturers may choose to shorten the time of upgrade Option.

  @@@@@@@@@@@@@@@@@@@@@@@@@

  Before purchasing Windows 7, follow these steps:

  Go to your computer / computer laptop manufacturer Web site and see if Windows 7 drivers are available for your make and model computer / laptop.

  If this is not available, Windows 7 will not properly work for you.

  Run the "Windows 7 Upgrade Advisor" (you already have)

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=20

  Check if your specifications are compatible for Windows 7:

  "Windows 7 system requirements"

  http://Windows.Microsoft.com/en-us/Windows7/products/system-requirements

  Windows 7 upgrade paths:

  http://TechNet.Microsoft.com/en-us/library/dd772579 (v = ws.10) .aspx

  See you soon.

• Hi, receive error message: Error 1935 when trying to install adobe photoshop elements 11. An error occurred during the installation of Assembly component {9F81AF1-0E47-DC99-A01F-C8B3B9A1E18E}. HRRESULT:0 X 80070057. Can anyone help? I use windows Vista an

  Hi, receive error message: Error 1935 when trying to install adobe photoshop elements 11. An error occurred during the installation of Assembly component {9F81AF1-0E47-DC99-A01F-C8B3B9A1E18E}. HRRESULT:0 X 80070057. Can anyone help? I use windows Vista and the DVD is to this system. May this be the cause?

  Error 1935. Assembly Microsoft.VC80.CRT component | Install | Adobe Creative Suite 5.5, CS5, CS4 | Windows