Receiving "Invalid product key" when you try to activate a copy from valid Windows XP.

Similar Questions

• Get the invalid product key when you try to activate

  I bought my lap top with pre loaded windows 7. I bought at the same time from the same shop, Curry, a product key. Enabled - saved my windows 7 online. When I try to use the word, I get a message to activate windows by typing the product key code. When I do, and yes I type in there correctly, he said that only the key code is invalid.

  What is wrong on Earth? Please help me because I am lost the will to live.

  If you purchased Office 2010 and get no valid product key error to refer the article mentioned below:

  http://support.Microsoft.com/kb/2002262

• Receive the Error Message When you try to activate

  I had a disk crash hard and after repair of the drive, I reinstalled Vista Ultimate SP2. Now when I try to activate, I get the error message that the product ID is alread in use. What should I do to reactivate my software. It's black, real retail box version with original product id always sticker glued to the box.

  Hello

  It is used by the earlier original installation.

  Make a phone activation, ignore auto guests and brace yourself for a real person explain your situation.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• Receive error 0xC004E003 code when you try to activate Windows 7.

  Windows Activation does not work!

  I wanted to do a clean install of windows 7 pro, so I erased the hard drive, then re-installed from disc. Now I can't turn it on, I get the error 0xC004E003 code. WU does not work.

  you use an OEM SLP key that works only when the OEM recovery media is used. It can be activated by normal means.

  You need to change your product key to the one on your COA.
  Click Start, type slui 3, press on enter.

  Computers, which are built by large manufacturers provided with pre-installed Windows are supplied with 2 two product keys:

  (A) OEM SLP: this key comes pre-installed in Windows, when it comes to the factory. This key is designed to work with the special instructions isn't on the hardware of this manufacturer. Then, when Windows was installed using the OEM SLP (in factory) Windows 7 key leans on the motherboard and he sees special instructions and activates. (that's why you had no need to turn on your computer after you brought it home)

  (B) COST SLP: it's the product key that you see on the sticker on the side (or at the bottom, [or in the battery compartment]) of your computer. It is a valid product key, but must be used only in certain situations (for example, if the OEM SLP key stops automatic activation for a reason any). The key must be activated by phone. (Note: all manufacturers that use the SLP OEM system are bound by contract to include a certificate of Authenticity sticker (COA), which has a COA SLP key, on the computer)

• Receive the error message when you try to activate the solution Center

  I get an error message when I try to activate the Solution Center.  'Error in the file c:\Program Imaging\bin\hpqscloc\1033.xml HP analysis'

  I tried to remove and reinstall the entire software suite several times, but did not uninstall the Solution Center file.

  OfficeJet J6450.  Windows 7, 32 bit.

  Hey R29,.

  Start by downloading the full package of driver from here: HP Officejet full feature and driver software

  If you have recently downloaded this driver package, you may be able to skip this step. If you have problems with the steps below and impossible to find a directory, you must re-download the driver pack and launch the exe.

  1. disconnect the USB from the computer printer.

  2. now, go to start > run > and type folder

  3. search for any record label hp_web_release or 7z

  4 inside of this folder, navigate to the 'util' directory > directory 'ccc '.

  5. in there, run Uninstaller_L1 through L4 in order.

  6. check Add/Remove programs in the control panel for additional HP programs that have not been deleted and delete.

  7 remove the HP or Hewlett-Packard directory in Program Files.

  8 Goto Program Files > common files and remove the HP or Hewlett-Packard directory there as well.

  9. Select start > run and type "temp". inside this folder, delete all the files.

  10. Select start > run and type "%temp%". inside this folder, delete all the files.

  11. now restart and reinstall the driver using the driver from the web.

  Let me know if that solves the problem.

  Thank you!

  Sean

• Does not accept my product key when you try to save office 2007

  I have earlier after this computer at least two years has attempted to register with the product key on the sticker on the side of my hard drive.  Office home and student came installed on my computer when I bought it.  I get a message telling me that the key is invalid and return.  I am doing an assignment for school where I need to insert comments in a document, I do not think that option is availible on work is it?  So I have two questions I guess.  I really appreciate any help I can get in this matter.  Thank you.

  http://Office.Microsoft.com/en-us/suites/FX101674081033.aspx

  If you have Office pre-installed on your computer when you bought it, it is a trial version.

  You must purchase Office, once the trial has been exhausted.

  The product key on your computer's operating system Vista, not the Office Applications.

  You can buy Office from the link above, or your local computer/Dept store.

  See you soon. Mick Murphy - Microsoft partner

• message "your purchase could not be completed" when you try to install Adobe Reader from the Windows store

  I try to install Adobe Reader Touch to my Surface installed Pro Windows 8.1 Microsoft Windows store.  I get the following message is displayed:

  "Your purchase could not be executed.

  Something has happened and it's impossible to make your purchase.  "Error code: 0 x 080070057.

  Only, this seems to be a problem with Adobe Reader Touch.  I was able to install applications from other vendors and Adobe (for example, Photoshop Express to the elements).  So it doesn't seem to be a problem with my Adobe account, or a problem with Windows Store system.

  Anyone have this problem?  All solutions?

  THX.

  Hi jjquinn75

  I recommend contacting Microsoft about this error message as it is returned by the windows store program.

  Furthermore, I you recommend to download the installer for Adobe reader offline using this link (Adobe - Adobe Acrobat Reader DC Distribution ) and then try to install on your device pro surface.

  Kind regards

  Rahul

• Error code 45090 indicating the invalid product key when reinstalling Windows XP.

  Original title: Windows XP Activation.

  I reinstall Windows XP on my computer. I used exactly the same media that came with the computer. But when, Activation by internet, I got the error message 45090 indicating invalid product key. I have check the product key and enter it again, but the problem still persists.

  I tried via the phone (number 1-88) by entering the long number (Installation id) and it tells me that it is a number of invalid product or something like that.

  Help!

  Hi uagtecos,

  You can follow this link completely & check if the problem persists.

  You receive an error message after you enter the product key when you try to install Windows XP

  Hope the helps of information.

  Please post back and we do know.

• Cannot activate Windows Vista get an error 0xC004E003 error when you try to activate

  OP: Activation of Vista

  Error 0xC004E003 when you try to activate Vista.  I had the laptop for over a year and yesterday I received a pop up when I logged my product key is invalid for activation.

  Hello labchris,

  I suggest you follow the link below and try the steps listed in the article for this problem:

  Error message when you try to activate a copy of Windows Vista: "the Software Licensing Service reported that license evaluation failed: 0xC004E003".

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Receive an error message when you try to INSTALL, can someone please pick up my computer and help me install?

  Receive an error message when you try to INSTALL, can someone please pick up my computer and help me install?  I'm on a MAC Version 10.13.3.  Thanks for the help!

  to do this, you will need to contact adobe in the pst time support by clicking here and, when available, click on "still need help," https://helpx.adobe.com/contact.html

  but they can refer here for help and no one here will (or should) have on your computer.  If they do, or someone offers to contact you via Skype, you're about to be a victim of fraud.

• Received the following message when you try to install Photoshop CC "you run an operating system that Photoshop no longer supports. See the system requirements for a complete list of the supported platforms. "So I use Windows Vista not sure do I

  Hello

  I received the following message when you try to install Photoshop CC, "you run an operating system that Photoshop no longer supports. See the system requirements for a complete list of the supported platforms. »

  I use Windows Vista so not sure what to do now! Any help would be greatly appreciated thanks.

  CC of Photoshop only works on Windows 7 or Windows 8/8.1. No Vista.

  System requirements | Photoshop

• Receives the following message when you try to open a project, "Captivate cannot open the fol.

  Receives the following message when you try to open a project, "Captivate cannot open the next project.  Ensure that the project is not already open... There is enough disk space... "All the critiria are put... still can't open the file.  Please help in the recovery of this project.

  Suggestions here:

  http://www.Infosemantics.com.au/Adobe-Captivate-troubleshooting/recover-corrupt-project

• When you try to delete e-mail messages in Windows Live Mail I get message "an unknown error occurred.

  Original title: "Uknown error has occurred", you can say that again!

  I use Windows 7 Edition home premium. When you try to delete e-mail messages in Windows Live Mail I get the message "an unknown error occurred. This seems to happen only when I want to delete the messages that have already been opened. Can I delete mail unopened very well. I am allowed to remove an open both message. But as I do that a few times to the top appears the message again stop again.

  Hi Rasrick,

  1. you receive with the message error codes?

  You can check out the following link and check if it helps:

  http://windowslivehelp.com/thread.aspx?ThreadId=8255bf0a-05ca-4e63-9c7c-b456e9c3a648

  If this problem occurs only with Windows Live Mail, you can post the question in the Windows Live community:

  http://windowslivehelp.com/product.aspx?ProductID=15

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• When you try to import a .mp4 file in windows movie maker, the program does not list the file when I search for it in his file.

  When you try to import a .mp4 file in windows movie maker, the program does not list the file when I search for it in his file.  Help, please.

  As I suggested previously, conversion to a format like
  . WMV before you import it into Movie maker may be the solution.

  The free Converter from Microsoft can be a place to start:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Download Microsoft Expression Encoder 4 with Service Pack 1 (SP1) (freeware)
  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=24601
  (runs under WinXP SP3 / Vista / 7)

  When you install the program...
  Start Microsoft Expression Encoder 4
  (Start / programs / Microsoft Expression /)
  Microsoft Expression Encoder 4)

  On the "Load a new project" screen...
  Left click... "Transcoding project '...

  When the program opens, click on... File / import...

  (If at any time you get lost while browsing
  the program of... to... Window / active Reset
  Type or workspace... CTRL + SHIFT + R)

  Look for the file/s that you want to convert.
  (If files do not appear... open the fall
  window and choose... All files)

  Click (highlight) left the files and the left on the Open button.

  You can see the files in the "Multimedia content" pane

  In the right column... left click on the tab "Output"...

  Open the drop directory window and choose an output folder.
  (This is where you will find your converted file)

  On the left, click on the button "encode".

  Wait... video encoding CPU intensive and can
  be a slow process. It is always best if you do not have
  multi-task while files are encoded.

  Now... try import you again. File WMV in Movie Maker.

  More converters:

  There are to many converters available on the net...
  the following links are some examples. You can
  need to experiment to find the best result.

  Proceed at your own risk *.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  (1) format Factory (freeware)
  http://www.videohelp.com/tools/Format_Factory
  (the 'direct link' is faster)
  (the file you want to download is: > FFSetup270.zip<>
  (FWIW... installation..., you can uncheck
  'all' boxes on the last screen... even in this case, it may
  install the Ask toolbar on your system)
  (Windows XP / Vista / 7)

  First, you will need to decompress the file or just open the
  Drag FFSetup270.exe out of the folder
  and drop it on your desktop. To install left click.

  (2) Freemake Free Video Converter (freeware)
  http://www.Freemake.com/free_video_converter/
  (Windows XP / Vista / 7)

  (3) Koyotesoft Free Video Converter
  http://www.koyotesoft.com/indexEn.html
  (2000/XP/2003/Vista/Seven)

  (4) Sothink Free Video Converter
  http://www.Sothinkmedia.com/video-converter/
  (Windows XP / Vista / 7)

  (5) hamster Free Video Converter
  http://www.PCWorld.com/downloads/file/FID, order 155794, 4 pages, 1/download.html
  (Windows XP, Vista, 7)
  (If you choose Custom Installation
  You can uncheck additional modules you
  do not want to install)

  (6) quick Media Converter
  http://www.Cocoonsoftware.com/
  (Win XP, Vista, Win 7 Home Premium)

  (7) SUPER © Simplified Universal Player Encoder & Renderer
  http://www.videohelp.com/tools/Super
  (the download mirror site is faster) (Windows XP / Vista / 7)

  (8) Xilisoft Video Converter
  http://www.Xilisoft.com/video-converter.html
  (not freeware but receives good reviews)
  (Windows XP (SP2 or later) / Vista / 7)

  Good luck...

• I keep on getting error 0x6D9 and 0 x 80070424 code when you try to activate my windows firewall, also my mcafee firewall does not work.

  I keep on getting error 0x6D9 and 0 x 80070424 code when you try to activate my windows firewall, also my mcafee firewall does not work. I have Windows 7 and it started only caused since last week. Can someone give me an idea on how to solve this problem?

  When you have McAfee running, he provided the Firewall & automatically deleted the Windows Firewall.   Panel\Windows Firewall control page should have shown a message say.  If you managed to change the settings for the Windows Firewall then you might have corrupted both the McAfee & Windows Firewall.

  I really think you should try a restore for some time point before you tried modifications, if that is even possible.

  If you have uninstalled McAfee Control Panel, programs, then you must also run the Tool McAfee Consumer Product Removal or you will get several unpredictable problems.

  If you still have problems after running the McAfee tool then it could be the result of the previous Windows Firewall changes & the corruption of the system resulting.  Your system is in an unknown state as a result of these changes.

  You can try running SFC/scannow in an admin command prompt, but it wouldn't do any good.

  You may need to use the installation DVD to do a repair installation.  I hope get you lucky, but you may need to do a complete reinstall of Windows.