Recent activity of SQL and PL/SQL space

SQL and PL/SQL used to have sections of recent content and recent activity. However, given that the last mess has been set, the recent activity section is gone.

Is it possible it could be brought back, please?

No problem. I added it to the bottom.

Tags: Oracle

Similar Questions

  • Problem link DB between active Data Guard and reports application database

    My version of the 11.2.0.2.0 and OS database is Oracle Solaris 10 9/10.
    I am facing a problem in my custody of data Active data base for purposes of tax. Active Data guard information is as below.

    SQL > select name, database_role, open_mode from v$ database;

    NAME DATABASE_ROLE OPEN_MODE
    --------- ---------------- --------------------
    ORCL PHYSICS READ SHALL ONLY APPLY

    Detail of the problem is less than
    ------------------------------
    I have created a db link (name: DATADB_LINK) between active data guard and report of application of data base for purposes of tax.
    SQL > create database DATADB_LINK link to connect to HR identified by HR using 'DRFUNPD ';
    Database link created.

    But when I run a query using db link to my database of enforcement report I got this error below.

    ORA-01555: snapshot too old: rollback segment number 10 with the name ' _SYSSMU10_4261549777$ ' too small
    ORA-02063: preceding the line of DATADB_LINK

    Then I see logfile named database alart Active Data Guard and get below error

    ORA-01555 caused by the following SQL statement (SQL ID: 11yj3pucjguc8, time of request = 1 sec, SNA: 0x0000.07c708c3): SELECT "A2". "' BUSINESS_TRANSACTION_REFERENCE ', 'A2 '. "' BUSINESS_TRANSACTION_CODE ', MAX (CASE 'A1'. "TRANS_DATA_KEY"WHEN "feature' AND 'A1'." " END OF TRANS_DATA_VALUE"), MAX (CASE 'A1'. "TRANS_DATA_KEY" WHEN 'otherFeature' THEN 'A1' '. "" END OF TRANS_DATA_VALUE")

    But the interesting point if I run the query report directly in the Active Data Guard database, I got never error.

    So it's a problem of link DB between active Data Guard and other databases?

    Fazlul Kabir Mahfuz wrote:
    My version of the 11.2.0.2.0 and OS database is Oracle Solaris 10 9/10.
    I am facing a problem in my custody of data Active data base for purposes of tax. Active Data guard information is as below.

    SQL > select name, database_role, open_mode from v$ database;

    NAME DATABASE_ROLE OPEN_MODE
    --------- ---------------- --------------------
    ORCL PHYSICS READ SHALL ONLY APPLY

    Detail of the problem is less than
    ------------------------------
    I have created a db link (name: DATADB_LINK) between active data guard and report of application of data base for purposes of tax.
    SQL > create database DATADB_LINK link to connect to HR identified by HR using 'DRFUNPD ';
    Database link created.

    But when I run a query using db link to my database of enforcement report I got this error below.

    ORA-01555: snapshot too old: rollback segment number 10 with the name ' _SYSSMU10_4261549777$ ' too small
    ORA-02063: preceding the line of DATADB_LINK

    Then I see logfile named database alart Active Data Guard and get below error

    ORA-01555 caused by the following SQL statement (SQL ID: 11yj3pucjguc8, time of request = 1 sec, SNA: 0x0000.07c708c3): SELECT "A2". "' BUSINESS_TRANSACTION_REFERENCE ', 'A2 '. "' BUSINESS_TRANSACTION_CODE ', MAX (CASE 'A1'. "TRANS_DATA_KEY"WHEN "feature' AND 'A1'." " END OF TRANS_DATA_VALUE"), MAX (CASE 'A1'. "TRANS_DATA_KEY" WHEN 'otherFeature' THEN 'A1' '. "" END OF TRANS_DATA_VALUE")

    But the interesting point if I run the query report directly in the Active Data Guard database, I got never error.

    So it's a problem of link DB between active Data Guard and other databases?

    Check this statement that applies to your environment

    * ORA-01555 on Active Data Guard Standby Database [1273808.1 ID] *.

    also

    http://asktom.Oracle.com/pls/asktom/f?p=100:11:0:P11_QUESTION_ID:8908307196113

  • Firefox can be configured to open the Firefox more recently-active window when you click on a link in another application? Using multiple profiles.

    I think it's really a feature request, but I don't see a forum for this. I used to use firefox almost exclusively, but switched to chrome when I started working freelance for a couple of different companies - the identities of chrome feature really helps me keep my sanity by having a unique identity for each company. However, a problem has recently developed with chrome which brought me back to firefox. The profile under firefox feature seems to have gotten much better since I made the first move, and I'm pretty happy with the way it works... with one exception:

    With firefox, clicking on a link in another application, always opens in the default profile. With chrome, she would always open in the browser window that was most recently active. It's a very intuitive behavior, because everything I do in the other application (e.g. thunderbird, evernote, Skype) is almost always linked to whatever browser window, I had finally opened.

    Any chance to do this implemented? Or maybe there is already a way to do this? I found the following related topics, but neither helped with this issue:

    https://support.Mozilla.org/en-us/questions/981608?ESAB=a & As = AAQ
    https://support.Mozilla.org/en-us/questions/983341?ESAB=a & As = AAQ

    The 'solution' to this topic is that there is no real solution so that the owner of this thread wants to happen.

  • I recently downloaded Windows XP and he tells me is not passed windows genuine. How can I spend without having to buy it again?

    I recently downloaded windows xp and he tells me is not passed windows genuine. How can I spend without having to buy it again?

    It is likely that if you have downloaded XP a purchase, that it's a forgery, because MS has not sold XP Download drink for years.

    As says Carey - we need to check it out...

    To analyze and solve problems for Activation and Validation, we need to see a full copy of the report produced by the MGADiag (download and save to the desktop - http://go.microsoft.com/fwlink/?linkid=52012 ) tool
    Once saved, run the tool.
    Click on the button continue, which will produce the report.
    To copy the report in your response, click the button copy in the tool (ignore the error at this stage), and then paste (using r-click and paste or Ctrl + V) in your response.
    -* in your own thread *, please

    Please also state the Version and edition of Windows cited on your COA sticker (if you have one) on the case with your machine, but do NOT quote the key on the sticker!
     http://www.Microsoft.com/howtotell/content.aspx?PG=COA

  • Many attempts of Incorrect password in recent activity

    For the last two weeks, that my PC was apparently send wrong password for my Microsoft Account about 6 times every minute, it's online. I know it's my PC because the IP address corresponds to successful attempts that I manually enter. It was not really a problem until today, where 'several incorrect connections' me locked out my 360.

    I looked at similar topics on this site and found most people running Windows 8 are suffering and solve similar problems. It would be great, but I'm running Vista and their solutions do not apply to this machine.

    According to the recent activity page, these attempts are coming from Firefox and Internet Explorer. It's really strange because I've never used Internet Explorer to connect to my Microsoft Account, ever. So it should not have all the information to send its own. The same question was held in April. At the time I tried to replace Firefox with Chrome, where Firefox was causing it with saved passwords. Nothing has changed.

    I posted a question here near there, but did not help because I mistakenly believed I was running XP and support for those who ceased.

    The activity has finally stopped when I did a system restore to a week earlier. In other words, until the end of May. That's when I looked at my page activity recently and saw he had again. I tried a system restore but farther back, I could go was a day and that solves nothing.

    I've been ignore him since then because it was not actually signed without my knowledge and it wasn't me blocking of my account, until today.

    Clearing the cache and delete cookies did nothing.

    Any help will be greatly appreciated,

    Alex

    You can see what program or service attempts to connect to your account on the network of the Windows resources monitor tab. In the start search box, type perfmon /res and press enter.

    More information on ResMon here: How to use Windows Vista Resource Monitor

  • How can I remove all restore points except the recent in windows 7 Professional because my space is get wasted because of it!

    I use Windows 7 Professional 64-Bit edition and the space is getting lost because it creates many restore points, and they can be useful every hour. If I want to keep most recent restore only point and I didn't want any. How can I do this?

    I use Windows 7 Professional 64-Bit edition and the space is getting lost because it creates many restore points, and they can be useful every hour. If I want to keep most recent restore only point and I didn't want any. How can I do this?

    Kristan response is good for cleaning.

    Now to make sure that the problem does not happen:

    1. Click Start, right-click computer and click Properties
    2. click on the link to the system protection in the left pane
    3. in the System Protection options, select a drive letter, and then click Configure
    4. under disk space drag on a number you can live with (I recommend at least 10% of your total).
    5. click on OK, OK

    (You can also delete all this screen system restore points).
    VP Tech Services

  • I recently installed Windows 7 and you connect via RDP.

    * Original title: activation of Aero?

    Hi, I recently installed Windows 7 and you connect via RDP. When I plugged in, I was greeted with Standard Windows, I went in tge customization panel but when I click on an aero theme, said that some parts of the theme have been disabled because I was using remote desktop. Is there a way I can enable Aero via Remote Desktop?

    Aero feature is disabled in all versions except versions ultimate and Enterprise

    Aero glass remoting

    https://en.Wikipedia.org/wiki/Windows_7_editions#Comparison_chart

  • Smartphones blackBerry how to clear recent activity?

    Can someone help me, I want to just clear recent activity, one located next to "selection profile", when you click in the Middle you see a scrolling down, I want to just erase that, because keep telling me that I missed calls and text Messages and I've already seen them.

    With the BlackBerry device powered time, remove battery for a few seconds and then reinsert the battery to restart.

    If it clears then maybe you have a message or text that you opened the device don't think that you have opened. It happens from time to time with me. Also check the messages as well as for unread items folder.

  • My computer has been infected recently with Sirefef (AB and W variants). How will I know if I do a backup/clean install of the operating system or not?

    As says the question: my computer has been infected recently with Sirefef (AB and W variants).  How will I know if I do a backup/clean install of the operating system or not?

    I'm running a full system scan in ESM right now, and it has detected multiple instances of sirefef.   I have remove as they pop up, but I'm afraid that when I run another scan they all will always be there.  Is there a way to know if MSE is actually remove them and he cleaning?  If not, should I do a back up and reinstall the OS?

    Thank you.  I can choose to try this, however, I would like an answer to my other questions first.

    Sirefef is a rootkit and yes he can hide in your system.  This is why it has been suggested that you may need to reformat/reinstall.  In fact, it's the only way to eliminate malware.  Multiple scans with several scanners and no conclusion malware probably indicate he disappeared, but the key word is "probably".  Malwarebytes is good and what he finds now may be traces of the infection, but what he finds perhaps not active more - it is always good to run the scans so.

    What spare drive did you run?  What scanners did you use?  See again you and follow the guide "Malwaretips"?

    For the firewall problem, you can try the following Microsoft Fixit.

    Diagnose and automatically fix problems of Windows Firewall service

    http://support.Microsoft.com/mats/windows_firewall_diagnostic/en-us

    One of the users of the Forum answers maintains that a great guide on information security is important for understanding the removal of malicious software.  See the following compliments of Brian M - for suggestions on how to solve your problem: http://www.selectrealsecurity.com/malware-removal-guide/#after see: after the removal process and solve the problems of Post disinfection

    Uninstall/reinstall of MSE is how?  All the problems?  Have you tested MSE with eicar to be sure it's working?

    Assume that you have not had an opportunity to review the MSE Installation Checklist or you would have noted that MSE and Windows Defender cannot be used on the same computer.  So if WD works in fact it means MSE has been disabled/not not work correctly or not installed.

    See the next WD re: Windows Defender and Microsoft Security Essentials

    Good luck...

  • Hello. I'm having trouble installing my Photoshop CS3 software. I use a PC. My computer recently had a virus and the it consultant all deleted and reinstalled Windows Start program with all updates. My operating system

    Hello.

    I'm having trouble installing my Photoshop CS3 software.

    I use a PC. My computer recently had a virus and the it consultant all deleted and reinstalled Windows Start program with all updates. My operating system is "Microsoft Windows 7 Home premium 2007 - with updates added.

    The version of photoshop that I have is 'Adobe Photoshop CS3, 2007. I installed Photoshop CS3 which seemed to install properly. I activated the dics and inserted the serial number. Activation complete. I had a problem with the registration with the following message through "a problem has been experienced so he was trying to send information on the internet".  I had a problem with look at a. CR2 file but I got a converter of Microsoft 'CameraCode '. I can use Photoshop software. I can't use a software link with Photoshop CS3 I was using before. It's "NIK software - Silver Efex Pro". This means that on the section "filter Photoshow. Can I use the software, but it does not save the changes I made. When I turn off the computer Photoshop CS3 is deleted from my computer. I got LIGHTROOM but software that works very well.

    The summaries. I can load Photoshop and use and save the changes, but when I turn off my computer the software is removed from the hard drive. But I can't get the link software - Nik software - Silver Efex Pro. Please can you advise me what I should do to get my software working properly again.

    Thank you.

    Keith Fernandez

    Once the software is installed, it will not be removed under normal circumstances.

    I do not know if your computer is still infected and it is removed or the problem is that you can't 'see' photoshop' but it is always installed.

    to verify this, check the installation directory and check its size on your hard drive.

  • Hello. I'm having trouble installing my Photoshop CS2 software. I use a PC. My computer recently had a virus and the it consultant all deleted and reinstalled Windows Start program with all updates. My operating system

    Hello.

    I'm having trouble installing my Photoshop CS2 software.

    I use a PC. My computer recently had a virus and the it consultant all deleted and reinstalled Windows Start program with all updates. My operating system is "Microsoft Windows 7 Home premium 2007 - with updates added.

    The version of photoshop that I have is 'Adobe Photoshop CS3, 2007. I installed Photoshop CS3 which seemed to install properly. I activated the dics and inserted the serial number. Activation complete. I had a problem with the registration with the following message through "a problem has been experienced so he was trying to send information on the internet".  I had a problem with look at a. CR2 file but I got a converter of Microsoft 'CameraCode '. I can use Photoshop software. I can't use a software link with Photoshop CS3 I was using before. It's "NIK software - Silver Efex Pro". This means that on the section "filter Photoshow. Can I use the software, but it does not save the changes I made. When I turn off the computer Photoshop CS3 is deleted from my computer. I got LIGHTROOM but software that works very well.

    The summaries. I can load Photoshop and use and save the changes, but when I turn off my computer the software is removed from the hard drive. But I can't get the link software - Nik software - Silver Efex Pro. Please can you advise me what I should do to get my software working properly again.

    Thank you.

    Keith Fernandez

    Hi Keith,

    You won't be able to re - install using the discs and the number of series that you used initially, but we have a solution.

    The activation for more server CS2 is no longer in service. For this reason, we did a version of these titles of software available that doesn't require activation. This is for users who already buy the software.  For more details and specific links for the software, please see the following link:

    Activation server stops for Creative Suite 2 and Acrobat 7 product Macromedia

    Instead of your old serial number, use the one shown next to the download link: download Acrobat 7 and CS2 products

    Guinot

  • When I updated to version 42 some how it got locked to try to update the log "update." the icon of the activity keeps spinning and the addon staus4ever rest ac bar

    When I have updated to version 42 that something happened during the upgrade. The icon of the activity keeps circling and my staus-4-ever the module bar stays on and the custom to go. When I try to check updates in options, it does not show the update to version 42 but when I go to help on Firefox shows that I have the 42 version. I tried to restart my computer and it still shows the download icon indirect approach, etc. T the closing down of the computer and it fed up with the same results. I refreshed Firefox and which did not help either. any suggestions?

    When you updated Firefox, you would update when there is not to add ons as well as without the staus4ever addon?

  • I recently dropped my laptop and it is weird, one day he int open up to 4 start times and sometimes it shows me a folder and a question mark in the interface and sometimes asked to reset my password, what are the steps to take?

    I recently dropped my laptop and it is weird, one day he int open up to 4 start times and sometimes it shows me a folder and a question mark in the interface and sometimes asked to reset my password, what are the steps to take?

    Anything can be corrupted on your MacBook Pro, but from what you say, it seems that the cable drive/SSD/flash memory/SATA hard was seriously damaged. Him "question mark" means that your Mac is unable to find any bootable device, meaning that it does not yet detect your OS X drive.

    You should make a backup of your files (if you can still do it) and take the Mac at the Apple Store or dealer to get a diagnosis. There may be several damaged parts.

  • How to improve the performance of your computer and free up space.

    Original title: the unwanted temporary files of windows is at the origin of the problems of proformanace

    According to a check of problem: the unwanted files temporary windows could take to improve the performance of your computer and free up space.

    Can anyone help with this simple problem.

    Angelo

    Hi Angelo,.

    1. which edition of Windows are you running?
    Example: Windows 7 Professional 32 bit.
    Please follow the below link to clean unwanted temporary files.
    Delete files using disk cleanup
     
    Microsoft at home.
    Slow PC? Optimize your computer for peak performance
    Make slate: how to remove the unwanted files and programs
     
    I hope this helps.

  • When I try to open Active Directory users and computers in Windows Server 2008 Standard, I get an error message.

    MMC.exe APPCRASH

    When I try to open Active Directory users and computers in Windows Server 2008 Standard, I get the error message below. Kindly help

    Problem event name: APPCRASH

    Application name: mmc.exe

    Application version: 6.0.6001.18000

    Application timestamp: 47918d 09

    Fault Module name: KseAdm.dll

    Fault Module Version: 6.0.1262.1064

    Timestamp of Module error: 49426cbb

    Exception code: c0000005

    Exception offset: 0004 849 d

    OS version: 6.0.6001.2.1.0.272.7

    Locale ID: 1033

    Additional information 1: fd00

    More information 2: ea6f5fe8924aaa756324d57f87834160

    Additional information 3: fd00

    Additional information 4: ea6f5fe8924aaa756324d57f87834160

    Hello

    The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums:

    http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

Maybe you are looking for