Recently when I print something on the internet, the police is magnified. What was once take a sheet of paper resumes several because of the LARGE font. Help!

I noticed more recently when I printed a recipe... the police has been enormous. Then I tried mapquest directions... same thing.

File > layout = scale

100% is usually better

Tags: Firefox

Similar Questions

  • F4580 works very well from the laptop but when I try to print something from mobile internet is blurry?

    Have run the HP Diagnostic print comes very well, very good copy.  The only problem is when I try to print something on the internet and then it's so blurry that it's barely readable.

    Hello Ann,.

    Allow me to quickly gather information about the issue in order to guide you in the right direction.

    1. what version of Windows is installed on the computer?

    2. what web browser do you use to print from the internet?

    3A this works much earlier?

    4 have have there been recent changes made on the computer before the show?

    I suggest you to refer to the links and check if it helps.

    Problems printing from the Internet

    I can't print or preview before printing a Web page in Internet Explorer

    Printing webpages: frequently asked questions

    Please post back with the results and we will be happy to help you further.

  • My programs crash/hang up when I print something. Why?

    HP C7280 all-in-one Phot-Oneosmart
    Model name CN246B

    Operating system: Windows 7 64-bit

    Test page prints OK Control Panel of configuration/Printers

    BUT

    My programs crash when I print something.

    Program is suspended when something sent to 'print '.

    and message (program not reponding) appears.

    This applies to Google Chrome, Word .doc files and Micrsoft Office 2010 wth .jpg files NitroPro 8 with .pdf files.

    I removed it and added, printer - and verified with the Test Page OK.

    I have recently, after the problem started (he worked until two weeks ago), installed a new Version of NitroPro (Version 8). The hope that it worked at least but same problem.

    Maybe something to do with the settings in Windows?

    Are you connected USB or wireless?

    If you USB, check if you have the USB cable plugged into a USB 2.0 port and not the 3.0.

  • When I play something with the sound, static is not bad, but static is always in the speakers.

    When I play something with the sound, static is not bad, but static is always in the speakers. I thought speakers was a new problem, obtained today, has no help.tried for the driver online, but do not think that I got the right one, recently had to reload vista, need help

    original title: get the constant static

    Hi MikeMorrow422,

    ·         Did you do changes on the computer before the show?

    ·         It was working fine?

    Follow these methods.

    Method 1: Perform a System Restore and check if the problem persists.

    Method 2: Follow the steps in the article.

    Tips for solving common audio problems

    For reference:

    No sound in Windows

  • When I print double-sided the second draws on the reverse side

    When I print double-sided the second draws on the reverse side

    It should be an option to "flick upwards" or something like that when you choose "print on both sides", uncheck this option.

  • Printer print, when I print documents to the right side of the document gets cut it does not finish what was on the screen.

    When I print documents to the right side of the document gets cut it does not finish what was on the screen.  This happens on all documents.  I don't know what to do.  I got a HP Photosmart Premium and he did it so I thought it was defective and bought a HP 7520e all in one and it does the same thing.

    Hello

    All changes made to the computer before the show?
    Method 1:
    See the link, run the Fixit and check.
    Diagnose and automatically fix problems printing and printer
    http://support.Microsoft.com/mats/printing_problems/en-us
    Method 2:
    If the methods above do not solve the problem you can check this link and follow the steps.
    Printer in Windows problems
    http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows
    Method 3:

    Try to adjust the alignment on the other side. Follow the steps.

    1. Click Start.
    2. Choose Control Panel.
    3. Choose a printer.
    4. Choose preferably to the printer.

  • I have a Dell A940 priner and when I print a documdent the entire document is covered with blue lines

    I have a Dell A940 priner and when I print a documdent the entire document is covered with blue lines. How can I get rid of these blue lines?

    Doodle of the clown,

    Do you use ink cartridges Dell series 2?

    Rick

  • Recently, when I download files from the SD card, LR6 not rename the files. How can I fix it?

    Recently, when I download files from the SD card, LR6 not rename the files. How can I fix it?

    If I open the folder, not through Lr, I can rename the file. Now, the problem disappeared. Maybe it was related to the DD. I removed and put back in place the protections in SD via the menu of my camera and the problem disappeared. Now, he works as usual. Amount and rename the files by LR. Thank you for your interest

  • When I print from Lightroom 5 I get a mirror image, what settings should I change?

    Hello I have a printer Epson SC-P600. When I print pictures from the 5 Lightroom print module, I get a mirror image of the printer. When I print from iPhoto, the direction is correct. Am I missing a setting somewhere in the print module in Lightroom I must uncheck or check?

    Hey Joe,

    When I chose the layout of the full dialogue you had was posted. Reverse has been verified, so I disabled it.

    Everything works perfectly now.

    Thanks for your help.

  • my fonts disappeared! When I go to change the system fonts and fixedsys... What do I do?

    I use Vista Home Basic and a little more than a month I've had problems with the script!  All the lines and symbols... I have restored until I can't do a day earlier that when this problem happened!  Finally, I changed the standard windows fonts and I use somethings, but much is still in the symbols (dashes, lines, etc.).  I went into my fonts folder in Control Panel and my folder is empty!  When I go to change the system fonts and fixedsys... What do I do?

    Hi Vickie,

    If you see only the fonts system and no additional (specific program) installed fonts, then you can try the following steps and check.

    Most likely, the fonts are installed on your computer are hidden. Did the same by following these steps.

    Method 1:

    a. open fonts by clicking the Start button, clicking Control Panel, appearance and personalization, and then clicking fonts.

    b. now click organize , and then click on folder and search options.

    c. click the display and check to select Show hidden files, folders and drives.

    d. click apply and OK. Check if you see all the fonts.

    (Make sure that show you the files hidden after the repair is done by selecting don't show hidden files, folders and drives.)

    Method 2:

    Try to perform the clean boot procedure and check if it helps.
    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    After the troubleshooting steps, please refer to clean the boot link to put the computer to normal startup mode.

    For more information, you can also read the following article.

    The problems of fonts

    You can also read the following article and check.

    Fonts: Frequently asked questions

    Hope this information is useful.

  • Is there a parameter that allows to convert customer vectorized on work type supplied when we do not have the correct fonts in our system?

    Is there a parameter that allows to convert customer vectorized on work type supplied when we do not have the correct fonts in our system?

    Try to place the linked files as an object, and then do > flatten transparency with the appropriate settings.

  • When I type something in the search box, it will in https mode and when I continue searching that nothing happens, IE search engine does not react. Thank you.

    When I type in the search box 1st time the Google page looks fine in https mode, but when I want something else type in the search box, nothing happens.

    You can check whether DOM Storage is enabled.

    You can check the pref (s) dom.storage.enabled on the topic: config page.

    Clear the cache and cookies from sites that cause problems.

    "Clear the Cache":

    • Tools > Options > advanced > network > content caching Web: 'clear now '.

    'Delete Cookies' sites causing problems:

    • Tools > Options > privacy > Cookies: "show the Cookies".

    Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance).

    • Do not click on the reset button on the start safe mode window or make changes.

  • Why doesn't Firefox automatically go the first google result when write us something in the browser bar?

    In previous versions, when I wrote something like "Heathrow airport" in the browser bar, FIrefox automatically redirected to the site of the airport, which is I guess that the first result of a google search. Why this won't happen again? Is this a problem of the new version or is there any setting to change?

    You can change the pref keyword. URL on the topic: config page to use Google's "I'm Feeling Lucky" or "Browse by name" Google.

    To open the topic: config page, type Subject: config in the address bar (address) and press the 'Enter' key, as you type the url of a Web site to open a Web site.

    If you see a warning then you can confirm that you want to access this page.

  • HP Deskjet Ink Advantage 4615: Printer is deleted when delete print queue of the printer in Win8.1

    I right click the "Delete the print queue" option in "devices and printers". Who deleted the default printer and also removed the icon of the printer. The system then made the fax printer HP 4610 series the default printer. I re - install from the web HP printer drivers, but the HP 4615 icon does not appear with the other printing devices in "devices and printers". In each application, I need to select the HP4615 now that the printer before I can print. If I click on "Add a device" or "add a printer", the HP 4615 is not picked up. If I select "printer queue", then it shows the HP series fax and printer HP4615. How can I get the system to display the HP 4615 icon so that I can make my default printer?

    @Pietcar,

    I hope you're well and welcome to the community of HP

    I read on how you had removed the icon of the printer Deskjet Ink Advantage 4615 of devices and printers and since then have tried to reinstall the printer, which does not have the icon back to the printers and devices section, leaving you to not be able to select the 4615 as default printer.

    Here are my suggestions, starting with:

    1. run the print and scan the doctor. This diagnostic tool will check for all conflicts that may be causing the problem. The tool will show you a report at the end. If there is a problem that the tool could not fix, you will notice it in the results. Let me know what the results detected please. (Select difficulty printing when you run the PSDr)

    2. run the HP printer install Windows Wizard to find and install the driver "Full Feature" printers and software and go through the installation to see if there are errors or if the installation fails at any point.

    Check the devices and printers again to see if the printer icon appears. Also try to restart the PC to see if that helps.

    Please keep me informed of the result!

    If one of my suggestions, helped to reach a solution, I ask you to click on the button "Accept as Solution" please and thank you! If you want to send me a 'thanks' for my answer to help today, click on the thumbnails below.

  • When you print a photo, the image is too light

    Original title: copying photos

    I copied a picture but when it printed he was pale with barely any color!  my laptop is new. I have not had any problems with my old laptop with the same printer.

    Hello

    1. What is the serial number and model of the printer?

    2 Windows operating system you are using?

    3. what application you use to print photos?

    4. What is the format of the photos you want to print?

    You can read the following article and check if it helps.

    Printer in Windows problems

    If you are using Windows 7, you can also consult the following article:

    Picture printing: frequently asked questions

Maybe you are looking for