Recommendation of the IPS

Similar Questions

• What is the last recommendation on the use of Aperture with El Capitan system software?

  What is the last recommendation on the use of Aperture with El Capitan system software? I'm sure to BONE 10.11.x since I was a big user of Aperture?

  TIA,

  If you need a feature that has opening but Photos doesn't work, click here and follow the instructions.

  (141652)

• Recommendations for the best 3D modeling App / program?

  Does anyone have a recommendation for the best 3D modeling application / program?

  (More for the creative rather than animation games and computer work)

  Thank you

  Hello

  I love Autodesk Inventor, but you need to use BOOTCAMP or VMWare/Parallels to run it because it only works with Windows.

  See you soon,.

  Adam

• IPad disabled with thousands of pictures of children that are not backed up with iTunes or icloud. Recommendations for the recovery of photos please?

  IPad disabled with thousands of pictures of children that are not backed up with iTunes or icloud. Recommendations for the recovery of photos please?

  Sorry, but if your device is disabled and you have no backup, then you won't be able to save the data on the device:

  https://support.Apple.com/en-us/HT204306

  You should back up your device regularly to iCloud or import your photos to an application on your computer. Otherwise, you will be risking losing those photos. If your device has been lost, stolen, or crushed by your car, you'd be in the same situation. Really sorry for your photos.

  Good luck

  GB

• HP ENVY 4522: Recommendations of the thickness of card

  Hi all

  Can anyone recommend what the limit is on the map of paper/thickness? I tried 300 g/m², but is not pulling the card to start and accordingly the print appears longer bottom on the map. I plan on trying 275gsm then and slowly moving down until I know, but I was wondering if someone could recommend thickness in gsm?

  @Goardo

  Specifications > handling paper lists the supported paper:

  Location

• I need a download of software recommended for the Transcriber ICD-PX312 for Windows 7.

  I installed the software that came with the ICD-PX312 on a windows system 7 and it crashes constantly. I need a download location for the software recommended for the valid software for the Windows 7 platform.

  all links will be useful.

  Hi Tim,.

  Welcome to the community of Sony!

  Download and install the latest version of the software of the Organizer from the link below:

  http://eSupport.Sony.com/us/p/SWU-download.pl?MDL=ICDPX312&upd_id=8218&os_group_id=5

  If my post answered your question, please mark it as an "accepted Solution".

  Thank you for your message.

• Recommendations for the resolution of the screen on the W510

  Hi people,

  Recommendations on the resolution of the screen on the W510 - HD or HD +?

  And why?

  TIA,

  SD

  It really depends on your use.  I went with the HD + (1600 x 900), because the graphics card is powerful enough run games of high quality on this resolution and it provides decent realestate to make programming and another office on productivity.  I tried a HD (1280 x 800) screen at work and it is very small and useless for real work, but if you are hard to see or don't use it to calculate the light, he would serve well.  The FHD (1900 x 1080) display provides a lot of realestate, if you can read the tiny text and do a lot of business development type and graphic design works, more multitouch features that can be intreguing there, but I think the screen is a little too big to play video games.  That's my thought.

• The IPS log and monitoring

  Hi all
  

  
  

  A few queries on Cisco IPS. !!!

  1. who are the best tool to get the logs of cisco IPS?

  2 where or what directory Logs/events of Cisco are registered?

  3. I am able to see the newspaper today but not able to see beyond the newspaper? What are the possible causes?

  4. any free software tool that look for events and newspapers of cisco IPS?

  5 cisco IPS manager express is free software or we must only cisco customer account?

  
  

  For any kind of help... Thank you

  
  

  
  

  Jonathan

  1. you can use IME (IPS Manager Express) to display all events of your IPS.

  Here is the page of the EMI for your reference:

  http://www.Cisco.com/en/us/products/ps9610/index.html

  2. the logs on the device of the IPS itself has very little storage space and it wraps once the log is full, so if you have a large number of events triggered, you are only able to see the latest events.

  3. based on my description above.

  4 cisco IME - it's free (no additional license is required to use IME).

  5. as long as you have account ORC, you should be able to download the software of the EMI.

  I hope this helps.

• Failure of the IPS

  Hi all

  I am facing a problem when the IPS fails the entire network behind it is not not accessible.

  so, how can I check capacity of box two

  1-material bridging.

  2-software workaround.

  As far as I know, there is no HW diversion on the 4500. But you can use the software of derivation:

  http://www.Cisco.com/c/en/us/TD/docs/security/IPS/7-2/configuration/guide/IDM/idmguide72/idm_interfaces.html#pgfId-1169786

• Recover password of the IPS module (ASA)

  Dear experts,
   
  I have an ASA 5500 series with AIP SSM (IPS module), the username and password are lost.
   
  According to cisco portal, there are two approaches to recover the password:
  1 using the CLI command: hw-module module reset slot_number password;
  2. with the help of ASDM--> tools--> 'IPS password reset.
   
  Not sure whether the two commands to achieve the same result (retrieve password) or they may have different results (i.e. need to reset the module).
   
  The device is online, reset module is not privileged.
   
  After checking the information from the internet, it offers to reset the IPS module. Any problem will be produced if the IPS module is not reset?

  RDG
   
  Anita

  Hi Anita,.

  You can try using:

  HW-module module slot_number password reset

  Who will reset just the IPS to its default username/password:

  Cisco and cisco

  You can access the ASA CLI IPS:

  session 1

  Then type cisco and cisco (username/password)

  For example, you could add a new password.

  Don't forget to evaluate and select the right answer.

• Problem to run the IPS of ASDM

  Hi guys, I have an ASA 5520 ver 8.4 with a module AIP-SSM-40, when I finished the configuration, I can ping from ASA IPS module and the IPS module to ASA. I can ping IPS module to my PC and so on. the problem is when I try to launch the IDM (IPS tab) of the ASDM,

  This error message appears on the GUI. Error connecting to the sensor. Load sensor error. I have connected the interface of management of IP addresses to a switch, the ASA is connected to the same switch, and my PC is also connected to this switch, all in the same vlan.

  Can you help me on what can I do to solve it.

  Thank you.

  Hi Hugo,.

  Please see the following link

  https://supportforums.Cisco.com/thread/2092783

  http://www.Cisco.com/en/us/products/ps6120/products_tech_note09186a00808908d5.shtml

  Kind regards

  Prashant

• The IPS with ASA5520 failover

  We have a pair of 5520 s defined as active / standby, the two have an AIP - SSM.

  These two AIP are set to automatic update, that the SIG files so this is not a problem, but what about detecting active? The primary IPS will have seen a lot of traffic that switching IPS is not how active rule sets is performed when the ASA switches to the rescue unit? Will I 'holes' in my security of lack of sets of rules?

  Hello

  The units of the IPS are completely independent and don't sync anything without additional aid (for example using the Manager of security or other).

  Given their auto-update is good, but you must also ensure that the config is replicated, so when you make a change on one that you have to remember not to make the same change on the other.

  Situation normal active IPS is transfer of traffic (and sleep mode sees nothing), but when they flipping the day before IPS is suddenly in the ASA active - he doesn't know that the other IP address is out of action, he sees just the traffic which it will inspect according to its configuration.

  HTH

  Andrew.

• The IPS software version

  Just got an ASA with a SSM - 20 module. I am trying to determine the latest revision of sensor for the IPS module software. V5.1 (7) E1 has a date of October 18, 2007 and the 3,0000 E1 version has a date June 28, 2007. Which is the latest version?

  6.x is the latest version. What you're talking about are simply patch levels. It is certainly possible that the versions 5.x and 6.x are both actively maintained (I was not paying much attention to 5.x since coming to 6.x). The press release or the patch 'most recent' is compared to the version of the software you are using. IOW, if 8,0000 E1 is released tomorrow, 3,0000 E1 is still the latest hotfix for customers running 6.x.

• The IPS Version update

  We use the ASA 5510 with AIP - SSM 10 IPS version 6.0 (3) E1 with a licensee agreement valid. Now, we want to update version IPS 1.0000 E2, is that the update is possible? If so guide me how and also guide me or provide the link how to make a previous backup.

  Yes, I just do the same thing. You will need to download the upgrade with the extension pkg (not the image file that I kept trying to do). The file is: IPS - K9 - 6.1 - 1 - E2.pkg under the security software, software updates.

  Link:

  http://www.Cisco.com/cgi-bin/tablebuild.pl/ips6

  Once you have this file, put it on an FTP server, or place the file on the local client that you use to connect to the IPS with IDM. You will need to go to the update of sensor in the IDM and either choose FTP or local update path and point to the file. Sensor recharges when it is made, but you don't won't restart ASA. It will take about 5 minutes, and then you should be able to reconnect to your sensor with IDM.

  Here is a useful link on the upgrade:

  http://www.Cisco.com/en/us/docs/security/IPS/6.1/Configuration/Guide/CLI/cli_system_images.html#wp1231089

  Here is a link to make a backup of the config:

  http://www.Cisco.com/en/us/docs/security/IPS/6.1/Configuration/Guide/CLI/cli_configuration_files.html#wp1033167

  I hope this helps!

  Jason

• IME for version 6.0 of the IPS

  Hi, iam using the module AIP-SSM-10 in ASA 5510.

  my version of the ips is: 6.0 (6) and I want to use ips manager express (IME). I tried with version 6.1.1 and 7.0.2 IME, but both are not supported for the current version of ips.

  1. Please tell me which IME support for ips 6.0 (6) version.

  2. how to level my ips 6.0 version to the current version or higher.

  Please send me url links.

  1. the EMI version 7.0.2 supports IPS version 6.0.6 according file following IME 7.0.2 Readme:

  http://www.Cisco.com/Web/software/282829584/28797/IME-7.0-2.Readme.txt

  Only the new features of the EMI, including monitoring console, dashboard and integrated configuration, health are supported only on the sensors running IPS version 6.1 or later. However, all the other features on IPS 6.0.6 is supported on IME 7.0.2.

  2. you can update the IP addresses directly to version 7.0.2 (E4) using the upgrade package: IPS-K9-7, 0-2 - E4.pkg

  Hope that helps.