HP ENVY 4522: Recommendations of the thickness of card

Similar Questions

• My HP Envy for television using the old Tuner card

  I currently have a HP Envy 17 with no PCMCIA card slot. My old computer is a laptop HP DV9260 (Vista) that came with a PCMCIA TV tuner card (I never used). I still have the card and all other components.

  I want to use my desire to pick up digital TV shows, but I can't use the previous tuner card because the desire doesn't have a card slot. Which is the best option... (1) find an adapter to use the prior TV tuner to the PC (via USB) card or 2) buy a new tuner system? I checked with HP, not a lot of help support. Thank you!!

  Nijuuf wrote:

  I currently have a HP Envy 17 with no PCMCIA card slot. My old computer is a laptop HP DV9260 (Vista) that came with a PCMCIA TV tuner card (I never used). I still have the card and all other components.

  I want to use my desire to pick up digital TV shows, but I can't use the previous tuner card because the desire doesn't have a card slot. Which is the best option... (1) find an adapter to use the prior TV tuner to the PC (via USB) card or 2) buy a new tuner system? I checked with HP, not a lot of help support. Thank you!!

  Hello

  You need something like this:

  http://sewelldirect.com/U142-USB-to-CardBus-adapter-for-3G-high-speed-modem-PCMCIA-cards.asp

  However, I would have preferred a new USB cards tv or boxes. Take a look at the price...

  http://www.amazon.com/s?ie=UTF8&keywords=notebook%20PCMCIA%20usb3.0%20card&page=1&rh=i%3Aaps%2Ck%3Anotebook%20PCMCIA%20usb3.0%20card#/ref=nb_sb_ss_i_0_15?url=search-alias%3Daps&field-keywords=external+usb+tv+tuner&sprefix=external+usb+tv%2Caps%2C234&rh=i%3Aaps%2Ck%3Aexternal+usb+tv+tuner

• Recommendations for the 2nd guest card, ESXi 4.1?

  I use ESXi4 in a House on a low-cost Dell image headless server. I would like to add a second network card PCI host - maybe an Intel PRO/100 and PRO/1000 off eBay - which is supported on ESXi 4.0 and 4.1.  My PCI adapter only supports 32-bit cards.

  Performance is not a serious problem, but I would like to find an adapter for under $ 25. I'll use this to experiment with different firewall, routing, and VPN between the WAN configurations (for example: DSL) and LAN.  It's more convenient and more 'green' to keep all my virtual machines guests on a single box, but references the list of cards supported against froogle and Bay takes more time than I expected.

  recommendations, pointers, and personal experience would be appreciated...

  I think the most common whitebox NIC's Pro 1000 GT.  ESX(I) dropped 100 MBps NIC support so I would avoid this option even if there is a community update driver Pro/100.

  Dave

  VMware communities user moderator

  Now available - vSphere Quick Start Guide

  You have a system or a PCI with VMDirectPath?  Submit your specifications to Officieux VMDirectPath HCL.

• HP Envy 4522: HP Envy 4522 stopped accepting the password on Lenovo laptop but still very well with 5 Nexus?

  Hello!

  A few months ago, I installed my printer and it worked perfectly on both devices: laptop Lenovo Y700 (Windows 10) and Nexus 5 (Android).

  As far as I know that it didn't change with the computer, outside of those frustrating mandatory Windows updates. The last time I printed something with the laptop was a few weeks ago and all went well. This afternoon, she asked my network key and it does not accept my Wifi password.

  Everything is fine and prints no problem when I use the smartphone.

  I have re-configured network wifi directly on the printer, but it has not made a difference.

  I have not changed internet provider.

  Can someone please clarify/help me?

  Thank you!

  Marilyn

  Hi @Merlin999,

  Thank you for showing interested by the HP's Support Forums!

  I understand that you are able to print from your Android device, but not from the computer Windows 10. I'd be happy to see this with you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  Looks like it's an address IP comes into conflict with the computer or there is a print driver problem. Windows updates can cause changes with print drivers.

  Please check that the printer and the computer are the on the same network.

  Tips for successful network configurations:

  • How old is the router? Update the firmware on the router.
  • Don't hide the SSID (network name).
  • Do not use a network of comments (SSID).
  • Using a unique network name (SSID).
  • What type of encryption are you helping? HP recommends WPA and WPA2.
  • Make sure you have 802.11 g active.
  • The printer cannot connect to the 5.0 GHz network. If you have a double router broadband, the 2.4 GHz network name should not be the same as the name of your network to 5.0 GHz. rename the 5.0 GHz network.
  • Enable DHCP.
  • Avoid using filtering by Mac address of the router.
  • Change the router channel fixed wireless as the 1, 6 or 11, who less than traffic.
  • You have a switch or an extra router?
  • What is the intensity of the signal?

  If the problem persists, please follow the steps in this Post of mine.

  You can try to change your WSD printer port by a Standard TCP/IP port.
  To do this, you need the IP address of your printer. The Network Setup page shows the parameters of network for the product. To print this page; Press the network button on the control panel of the product.
   
  You will then want to follow these steps for the switch port:
  1 locate and open devices and printers.
  2. right click on your printer icon and click printer properties.
  3. click on the Ports tab along the top of the page.
  4. click on the Add port button.
  5. If you have the option for the HP Standard TCP/IP Port, it's just otherwise select Standard TCP/IP Port.
  6. click on the button new port...
  7. click on Next > button in the wizard.
  8. Enter the IP address of your printer from your Network Configuration page. Note: The Port name is automatically filled in. I would recommend to put a check mark in the box. Always print to this device, even if it's the IP address change.
  9. click on the Next > button in the wizard.
  10. click on the Finish button.
  11. This can take you back to the Printer Ports window, you should be able to shut up. Then click on apply and OK in the Properties window.
  12. try to print to see if the problem is resolved.
    
  If the problem persists, try to install your printer using the Integrated Windows Solution.

  • What were the results?

  If the problem persists, we need properly remove and reinstall the software and drivers.

  • Follow the steps in this Post by my colleague @X-23.
  • Click here to download and install the series HP ENVY 4520 full feature software and drivers.

  I hope this information is useful. Please reply to this message with the results. Good luck!

• Recommendation for the new graphic card for the Pavilion a1250n Office running windows xp service pack 3

  trying to upgarde my pavilion a1250n computer of office for graphics card MSI r5450 radeon. After installation of the new card in the PCI express and turn on the machine, does not start, screen goes black and the fans to run at top speed. The card and the machine starts fine with the ATI radeon 200 exprees edge. I went into Device Manager and disabled the ATI radeon 200 adapter, and the system still wouldn't start with the new card. Went into the Bios at startup and changed the setting of the adapter PCI E, the slot where I put the card, and still won't work, even with the Bios and Device Manager changes I made.

  New card right out of the box, could be bad, or perhaps not compatible with my system? If is not compatible, what would you recommend? Currently I am running windows XP SP3 and am looking for a card that can be upgraded to Windows 7 64-bit. I know that the ATI integrated graphics card cannot be upgraded, so I'd appreciate some advice really.

  Thank you.

  John Perez

  Hi John,.

  The link above will show you how to clear the CMOS memory.  Just scroll down once you click on it.

  NVIDIA video cards are planned for a 300 Watt power supply

• Satellite L505 - recommendations for the new graphics card

  so Ive wanted to play dead space on my laptop, but there is no minimum required as far as I know. was wondering if anyone knew all graphics cards that are good for him and can be used with my laptop. And I need to know how to install the card.

  Hey Buddy,

  Please check this thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=224485𶳥

  As you can see, it is not possible to make a such update.

• HP Envy 700-470na: changing the case of the HP Envy 700-470na.

  Today, I upgraded my PSU and GPU for my HP Envy 700-470na. The case for my PC is too small and I can barely sort out the cables.
  
  If someone can recommend a decent case that is less than £50, can put all the pieces of pc HP in the case like the motherboard, hard drive etc and lots of space for the circulation of air and cables. Who would be appreciated! Thank you. I hope that my problem can be resolved soon.
  
  PSU - Corsair CX600M
  GPU - EVGA GTX 970

  The form factor for the motherboard is: Μatx: 24.4 cm (9.6 inches) x 24.4 cm (9.6 inches).  You must buy a case that is made for this.  This means that the accessory in the case must match the holes in the motherboard.  HP has their mothers caught their specifactions cards.  So, they can be standard.  In addition, the connectors in the case may not match the connectors on the motherboard.  The front connector for the power button is the one who comes to mind.  It is very difficult to recommend a case that is certain to work.  You can find the case you like and contact the manufacturer for Technical Support to see if they can make sure it will work for your components.

  Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

• HP ENVY 17-j101ex - replace the SSD HARD drive

  Hello

  I have HP ENVY 17-j101ex, with the standard configuration: 2 x 1 TB drive HARD 5400 RPM SATA. I want to buy 1 SSD drive and replace the first (boot) hard disk drive. I don't know if it works or not.

  I want to buy a SSD Samsung 840 EVO 250 GB SATA III (MZ-7TE250BW), 2.5 ", dimensions: 100 x 69 x 7 mm

  I have to: 1 x 1 TB HARD drive (as a secondary drive) + 1 x 250 GB SSD SATA3 (as your startup with system disk)

  Is this ok?

  I found some info, that:

  Supports a 6.35 cm (2.5 in) 300 GB or 160 GB SSD (SSD) drive in 7, 0 - mm (. 28 - in.) thick

  Supports 6.35 cm (2.5 in) hard disks to 12.7 mm (. 50-in) and a height of 9.5 mm (. 37 - in)

  Is it not this Samsung SSD too big?

  I also found information on envy 17 series, which:

  Supports the following single hard drive/solid-state drive combination configurations:
  ● 1-TB, 5400-rpm, 12.7-mm hard drive × 1 + 300-GB solid-state drive
  

  and also:

  NOTE: Supports RAID-0 as default for all dual hard drive/solid-state drive combination configurations.
  

  So, first of all should I disable RAID-0?

  Thank you for your help and sorry for my English

  In fact, I have the same model laptop PC series. You will have no problem replacing the mechanical main hard drive with an SSD. The Evo to Samsung 250 Gig is a very good choice. I suggest you get cloning software, put the SSD in the second slot, start from cloning software and copy (clone) the startup disk for the SSD. You'll slim down the contenst of the diskette of starting less than 250 concerts to achieve, but you can store files off to the second disk of 1 TB in the process. There are other ways to do this post if you have any questions.

  Here is a video showing how to install the hard drive.

  https://www.YouTube.com/watch?v=wx3dMGXrGCc

  RAID-0 is supported, but you wouldn't want as a second hard drive with an SSD. If your readers are appearing as volumes of letters separated in 'the PC' or 'Computer' then RAID-0 does not exist and you shouldn't have to do any disorder in the BIOS.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• HP ENVY 15-j101ex and the problem of compatibility with the Intel graphics driver update

  Hello community HP,

  I got my brand new HP ENVY 15-j101ex for almost a month now and it works very well. I tried to play any of my games on it and after 20 minutes the laptop crashed. After searching the cause, it turns out that my Nividia Geforce and Intel Graphics driver have been exceeded. I updated the driver from Nividia and everything went well. However, whenever I have download the new driver for the Intel graphics card it is not updated and simply say that my computer does not meet the minimum requirements. I checked the name of the driver and I even used the center of the action on my computer that I warned that I needed to update my driver and he even gave me a link to download from, but the same error occurred.

  Now, I can't play ang game without my computer crashing down. Everyone has faced this problem and does anyone have a solution?

  Thank you

  Ayman

  If you want to install the drivers and got downloads provided by HP, and then use the HP Support Assistant.

  Do not rely on the center of maintenance Windows for driver downloads recommendations.

  Download the Intel HD graphics card is not necessary. It willl be usually used only for productivity software you install and web browsing.

• Can you please tell me how to make the thicker arrows on the Pages.

  Can you please tell me how to make the thicker arrows on the Pages. Thank you very much. There is something incredibly simple to do, but I, having a disconcerting brain, am totally unable to understand. Please please help me. Thank you

  < re-titled by host >

  Try here > Pages for Mac: Add and edit forms

• What is the last recommendation on the use of Aperture with El Capitan system software?

  What is the last recommendation on the use of Aperture with El Capitan system software? I'm sure to BONE 10.11.x since I was a big user of Aperture?

  TIA,

  If you need a feature that has opening but Photos doesn't work, click here and follow the instructions.

  (141652)

• HP OfficeJet 3830: Printer HP Office Jet 3830 print labels? I can't find any option to change the thickness of the p.

  I need to print labels, sometimes one and sometimes pages of them.  When I put a sheet of labels in the Office Jet 3830 (in Word 16) the stuck sheet and would not go through the printer.  I can't find any way to adjust the thickness of the paper, not something thick like a page of blank labels.  If the printer has this function, how can I activate it?

  @vjdetling

  Printer:

  Range of all-in-one printers, HP OfficeJet 3830

  Full software features:

  File name: OJ3830_72.exe

  The specificationsindicate that the printer software can handle one type of media (paper type), titled "letter of card Index".

  Set your printing preferences / Print Preview to include

  • Media type 'Index Card letter'
  • Paper size: letter

  If includes it the list of media type, you can also try 'Matte of the Brochure' (wording varies)

  Help, suggestions and examples:

  Print Labels_Business-Cards_Cards

  When you see a post that will help you,

  Who inspires you, gives a cool idea,

  Or you learn something new.

  Click the 'Thumbs Up' on this post.

  Fixed / responded? Click this post accept as Solution to help others find answers.

• Recommendations for the best 3D modeling App / program?

  Does anyone have a recommendation for the best 3D modeling application / program?

  (More for the creative rather than animation games and computer work)

  Thank you

  Hello

  I love Autodesk Inventor, but you need to use BOOTCAMP or VMWare/Parallels to run it because it only works with Windows.

  See you soon,.

  Adam

• HP ENVY 5646: Replacement of the ink cartridges

  Hi - I have the all-in-one printer from HP ENVY 5646 and endorsed the Plan of instant ink Hp.

  I just run out of the "no Flash" color ink cartridge (ink cartridge black 'no snapshot' is about half full)-both "no snapshots" cartridges supplied with the printer.

  So - I replaced the color ink cartridge is 'no snapshot' with the color cartridge instant I received a few weeks ago, when I signed up for the instant the ink plan, my question is: should I also replace the ink cartridge 'snapshot not' black now with the black cartridge of instant or wait until it is empty?  Is it true that I should replace the black cartridge and color at the same time whenever one runs out of ink?

  Thank you very much for your reply - much appreciated.

• Guide for the installation of an HP ENVY 700-230qe CTO Desktop TV tuner card

  Hello

  I am trying to install a TV tuner (Hauppauge WinTV-HVR-2250 1213) to my HP ENVY 700-230qe CTO desktop PC. Can you please give me the guide installation and procedure for the TV tuner card? Thank you.

  Here's a guide to help you with the installation of an expansion card or of the video card in the computer.

  Please click on "BRAVO Thumbs Up" if I helped you and click on "Accept as Solution" If your problem is resolved.