Recommendations of ad blocking

Similar Questions

• cRIO ethercat application error

  I have a cRIO-9074 connected to and AKD via EtherCAT drive, running in standard mode.

  Simple straight line move using a VI express softmotion.

  It works fine except when I force the engine to stall, a strange thing.

  When I take the engine yet it will suddenly reverse direction rotates at a speed faster than the requested speed rear forward.

  The faults of the ADK out but it takes 100 to 400 ms to turn off the power.

  The AKD displays F 503 and Labview indicates an error code 6A 3130.  This resulted in "phase failure AKD.

  Relavent part of this error is: "the excessive power single-phase connection load".

  Of course I am inducing power over load so expect this fault, but the reverse rotation before the AKD Cup feeding is strange.

  I tried to reproduce this using the Kollmorgen Workbench software, but so far it only happens when Labview is controlling via EtherCAT.

  Hello Brians,

  Taking the engine beyond normal limits of operation may cause unexpected behavior. It is never recommended to intentionally block the engine. In this case, it seems that LabVIEW is trying to remove the constraints inherent in the system in the case of a stall by reversing the motor. The reason why you do not see this behavior in the Workbench is because it does not contain the control algorithms that are present in LabVIEW. In addition, I am curious about how to determine the time the motor runs in reverse; 100-400 ms seems very specific. If the pitch of the engine is possible in your code, I need to program under a security to handle this situation and perform all measures requires your application in the case of a stall.

  N

• The buttons in the menu do no work on a single page of the site tablet. Everything else works.

  I recently updated my sites for desktop and Tablet with a slide show. Now when someone selects that specific page in the view of the Tablet all top-level menu buttons do not work. If I go to another page in the view of the tablet on the menu buttons work. Could there be a problem with the slide show?

  Here is a link to the tablet version of this page that does not work... www.omnifysoft.com/ouc/tablet/speakers.html try to select one of the menu buttons. Here is a link to another page in the view of the Tablet and the menu at the top of work www.omnifysoft.com/ouc/tablet/agenda.html links

  Note, the link at the bottom of the page also works is specific to the menu on the referenced page.

  For any help or suggestion would be greatly appreciated.

  Thank you

  Lyrics

  Stacking of elements of the issues on the web. The top item in a stack receives all mouse events (whether filled or completely transparent). In this case, it seems to be a text frame large on the top menu where carriage returns are be used to position the speakers 'CONFÉRENCE' and «We have an exciting...» "on the page. This block of text blocks mouse events to reach the menu.

  I recommend using a block of text a lot more small "SPEAKERS" and a second block of text because "We have an exciting..." "If blocks of text are smaller their bounding rectangles will not interfere with your menu or other elements/links on the page.

• I received spam messages supposed to come from Paypal. I closed the account and block the associated map in case. However, I was recommended by Paypal to check my iphone and Ipad if no virus of these emails infected by the devices. How? Thank you

  anti-spam messages expected to come from Paypal. I closed the account and block the associated map in case. However, I was recommended by Paypal to check my iphone and Ipad if no virus of these emails infected by the devices. How? Thank you

  Unless you have jailbroken your iOS devices, there are no viruses that can infect them. Sounds like PayPal tries to return the ball.

• I installed the software recommended by Microsoft and my printer is not working as it says lxdncoms.exe and lxdrwbgw.exe of the printer driver have been blocked. What should I do?

  I installed the software recommended by Microsoft Security Essentials; When I tried to print instructions, I couldn't and the convenience store wrote lxdncoms.exe and lxdnwbgw.exe of the printer driver have been blocked.  How to unlock.  Computer is a Dell and printer is a Lexmark.

  Monday, October 15, 2012 05:17:39 + 0000, joyferg wrote:

  The game, October 11, 2012 20:43:14 + 0000, joyferg wrote:

  I installed the software recommended by Microsoft Security Essentials; When I tried to print instructions, I couldn't and the convenience store wrote lxdncoms.exe and lxdnwbgw.exe of the printer driver have been blocked.  How to unlock.  Computer is a Dell and printer is a Lexmark.

  What exactly is the software that you have installed?

  Ken Blake, Microsoft MVP

  The software is called RegWork.  I had to pay for it.  It is not yet enabled.  It seems to be just a type of utility to clean my system scan.  Since it was recommended by Microsoft Security Essentials, I thought it was the right thing to do.
  Should I continue to carry out this activation or should I unstall it.

  What makes you think that Microsoft Security Essentials recommended
  It? That cannot be good.

  You must uninstall it. Registry cleaning programs are all snake
  oil. The registry cleaning is not necessary and dangerous. Leave the
  Only registry and do not use any registry cleaner. Despite what a lot
  people think, and try to which suppliers of software record cleaning
  convince you to have used really doesn't hurt registry entries
  you.

  The risk of a serious problem caused by a registry cleaner by mistake
  delete an entry you need is much greater than any potential benefit
  It can have.

  Read http://www.edbott.com/weblog/archives/000643.html
  and http://aumha.net/viewtopic.php?t=28099
  and also
  http://blogs.technet.com/markrussinovich/Archive/2005/10/02/registry-junk-a-Windows-fact-of-life.aspx

  Let me stress that neither me nor anyone else who warns the
  use of registry cleaners never said that they always cause
  problems. If they have always caused problems, they would disappear from
  the market almost immediately. Many people have used a registry
  cleaner and never had a problem with it.

  The problem with a registry cleaner is that it carries with it
  the risk of a significant problem. And since there is no
  benefits of using a registry cleaner, running that risk is a very bad
  good deal.
  Ken Blake, Microsoft MVP

• I am trying to reinstall photoshop elements 10, however, when I upload 2 recommend files for window and try to double-click the file of the application to install. He is still blocked and installation stop repsonding to 92%.

  I am trying to reinstall photoshop elements 10, however when I download the 2 files for windows is recommended and double-click file from application to install. He is still blocked and installation stop repsonding to 92%.

  looking for an incomplete 7z file.

  Available downloadable Setup files:

  • Suites and programs: CC 2015 | CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
  • Acrobat: DC, XI, X | 9,8 | 9 standard
  • Captivate: 8 | 7 | 6 | 5.5, 5 | 1
  • Cold Fusion: 11: 10 | 9.0.2 version 9.0.0, 9.0.1, 8.0.1, 8.0.0, 7.0, 6.1, 6.0, 5.0, 4.0
  • Contribute: CS5 | CS4, CS3 | 3,2
  • FrameMaker: 12, 11, 10, 9, 8, 7.2
  • Lightroom: 6| 5.7.1| 5 | 4 | 3
  • Photoshop Elements: 13 | 12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
  • First Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

• I created a block of news recommended under a tab panel,

  

  I created a block of news recommended under a tab panel,

  How and where can I change my news recommended from one tab to the other?

  Hello

  You can change the information using Inbrowser edition. For example, if you are using Business catalyst as a host, then take a look at the image below

  

  Please let me know if you have any other question.

• recommended OS size for redo log block

  Hello
  
  AIX platform
  Oracle 10.2.0.4
  
  Is there any system recommended filesystem blocksize where redo log should be placed?
  We tested with 512 bytes to 4 096 bytes. We got the best performance over 512 bytes in terms of waiting avg on synchronization of log file.
  There's recommendation on the same oracle/AIX?

  978881 wrote:
  Hello

  AIX platform
  Oracle 10.2.0.4

  Is there any system recommended filesystem blocksize where redo log should be placed?
  We tested with 512 bytes to 4 096 bytes. We got the best performance over 512 bytes in terms of waiting avg on synchronization of log file.
  There's recommendation on the same oracle/AIX?

  The recommendation is to create logs of recovery on a mount with agblk = 512bytes. Please refer following link (page 60) which is an oracle + IBM technical brief:

  http://www-03.IBM.com/support/techdocs/atsmastr.nsf/5cb5ed706d254a8186256c71006d2e0a/bae31a51a00fa0018625721f00268dc4/ $FILE/Oracle%20Architecture%20and%20Tuning%20on%20AIX%20 (v%202.30) .pdf

  Kind regards
  S.K.

• Block outbound connections

  Hello, I want to know how to block outbound connections on my macbook 12 using MacOs Sierra.

  In the firewall, I have found that I can block incomming connections.

  I missed an option?

  How can I do Terminal form?

  You can edit the hosts file by using Terminal Server, although I wouldn't recommend it if you don't know what you're doing. But in doing so you can block outbound access to specified IP addresses or websites.

  If you just want to stop your mac login, why don't you just turn off your wifi if you are not connected to internet?

  Otherwise a GUI like Little Snitch firewall would be a better option that gives options very granular to block inbound and outbound traffic and is quite easy to use and implement.

• Why does 6Plus blocking active contacts once I unlocked?

  I have to constantly in order to unlock my contacts because the call goes directly to voice mail.  I've tried the settings/phone/etc.

  and can not understand how to UNLOCK all the time.  Is it possible to fix this?

  Greetings, judifrizelle,

  Looks like you have problems to keep unlocked touch unlocked on your iPhone 6 Plus. You are going to the correct setting on your iPhone to lead then I'll be happy to help you to understand this.

  Update the software on your iPhone, iPad or iPod touch iOS - only list you what your iPhone iOS is currently in. Sometimes, that's all you need to do.

  If you're still having problems with remaining unblocked calls, follow the steps below:

  How to back up your iPhone, iPad and iPod touch – if you do not have a recent backup of your iPhone 6, I highly recommend it for the safety of your personal data.

  Use iTunes on your Mac or PC to restore the iPhone, iPad or iPod to factory settings As the unblocking of the calls is supposed to "stick", he could have a problem with the installation of iOS. This process will erase the operating system on your iPhone and install a fresh clean copy. Using the settings on your phone does that erase your personal data.

  The first time through, set up your phone as a new iPhone. Once you are in your home screen, place a call to a place/someone ' one that you can test with. Once you disconnect the call, block the number of your "Recent" tab Ask them to remind you to test, unlock, and then ask them to try again. If you are able to answer the call, then the final step below.

  Restore your iPhone, iPad or iPod touch from a backup - use this section to add your data personal to your phone.

  Take care and thank you for using communities of Apple Support.

• Firefox keeps blocking all the links, I click to open in a new window even sites that are on my allow list and secure government sites. How can I stop?

  Firefox blocks everything I need to click on allow and on some sites I do several times that the Web page reloads the page for a new investigation.
  Very annoying... enough so that I can stop using firefox and not recommend it to others.

  Firefox normally a redirection to another address will automatically follow.

  You can check that the block of redirection is not lit? This setting is on the Panel of the preferences page:

  "3-bar" menu button (or Firefox) > Preferences > advanced

  Under the mini general tab in the accessibility section, uncheck the box "warn me when websites try to redirect or reload the page.

  If you have changed that, no matter what difference?

  If it was already off, it could be an add-on, or some security software or another program filtering that changes an automatic this intermediate page redirect.

• BBC iplayer is not AirPlay APPLETV since recent iOS upgrade 9.3.3. I used 2 iPads and 2 iPhones to do for at least two years, but now all content not mirroring BBC iplayer blocking Apple TV... Netflix still works!

  I used AirPlay Apple TV from Mac, iPad and iPhone without a problem for a while. Recently, just after the update to iOS 9.3.3 BBC iPlayer will not AirPlay without mirroring. If the mirroring, content blocks once streaming begins. All the settings are correct for the network and devices. Everything is up-to-date with the latest versions. Other media such as Netflix and Filmon still AirPlay perfectly if I suspect a conflict between BBC iplayer (who has not had an update for several weeks) and iOS 9.3.3 (which has been updated a few days ago and coincides with the beginning of the problem). Has anyone else experienced this problem and, if so, found a fix?

  Thank you

  John

  Equipment: Air of iPad, iPad 2, iPhone 4s, 5s, gen Apple TV 3 iPhone, iMac 21, MacBook Air 13, Wifi lan 12 + Mbps.

  No, I cannot repeat your experience, your questions seem to be unique to you and your establishment.

  Try these steps, check to see if things work after each step if necessary, before you try the next.

  1. Check AirPlay is on the Apple TV (turn market if it already is)
  2. Check that both devices are on the same network (settings > Wifi on the mobile device and the settings > general > network, on the Apple TV).
  3. Restart the Apple TV (settings > general > restart).
  4. Restart the Apple TV by removing ALL cables for 30 seconds.
  5. Restart your router. (Also try to remove the power cord for at least 30 seconds)
  6. Restart your computer or mobile device.

  If you're still having problems, try to use 802.11n for wifi if you currently use 802. 11B or 802. 11 g.

  If your problem is AirPlaying starting a computer, try turning off bluetooth

  If you're still having problems, the following article can help you.

  Troubleshooting AirPlay

  Troubleshooting connections and Wi - Fi networks

  Recommended Wi - Fi settings

  WiFi Diagnostic Software (for Mac users)

  You will also find help on this page, where I have collected some of the more unusual solutions for network problems.

  When you make adjustments to your network for better optimization, you can find some of the points mentioned onthis page useful.

• Flash was interrupted by Firefox (dangerous) but the download blocking, so I have no way to watch a video. Help, please

  I would like to see a video from Amazon. Firefox has disabled Flash because of another security breach. Unlike many updates past, this version of Flash crashes because of a script error.

  How can I run Flash even if it is wrong?

  Apple Quicktime can be used with videos from Amazon?

  You can try to download the latest Flash of this page: https://www.adobe.com/products/flashplayer/distribution3.html - is that the plugin-based browsers, and unless your security software EXE blocks, you can download the EXE or MSI format.

  A common cause of errors in script does not work on Windows Vista and later versions is the feature of safe_mode plugin Flash player; I don't think that this applies to Windows XP, but maybe he does now. This feature has the security benefits, but it seems to have serious compatibility problems on some systems. There is a hidden parameter to disable; I suggest to try it for a day to see if that helps you:

  (A) in a new tab, type or paste Subject: config in the address bar and press ENTER. Click on the button promising to be careful.

  (B) in the search above the list box, type or paste the flash and make a pause so that the list is filtered

  (C) double-click the preference dom.ipc.plugins.flash.disable - protected mode to change its value from false to true.

  It cannot take effect until all the Flash was discharged for a few minutes, or you close Firefox.

  According to the following support page, Amazon recommends to use Silverlight over Flash plugin: http://www.amazon.com/gp/help/customer/display.html?nodeId=201422810

  You can download it from Microsoft here: https://www.microsoft.com/getsilverlight/get-started/install/default.aspx

• How can I get Thunderbird to stop blocking all my messages... I have to go into options and accept each

  I would like to know where to change this setting.

  As Thunderbird is not blocking e-mails, I'm sure you don't want to block all my messages.

  Maybe you say Thunderbird is blocking remote content which it pays to safe guard your security and your privacy, for very obvious reasons.

  In this case, you would see a message "to protect your privacy, Thunderbird has blocked a remote content in this message.
  The 'options' button gives you a few options.
  You can choose to:

  allow the remote content for that message only
  

  or always allow for that particular e-mail address.

  You can also disable remote content blocking, although this is not recommended - the risk is your take. Please, do not assume the e-mail analysis will cover you.

  Tools > Options > privacy
  or
  Menu icon > Options > Options > privacy

  • "Content of mail slot
  • Select: "allow remote content in messages.
  • Click OK

  Please read this before you select the option to turn off - you must be clear about what he does.

  • https://support.Mozilla.org/en-us/KB/remote-content-in-messages

• How to unlock no matter what URL containing a phrase that I've accidentally blocked?

  I was recently on the Internet site the Blackboard of the University where I was trying to see a series of videos embedded in the site. Most of the time they would work not and recommended Firefox I had to install a plug-in, but sometimes the videos would work. In a case where the video was not working, I clicked on the tab "to block" which appear as I flew over the mouse to play the video. Open a pop-up setting and I started clicking around to try to let the media (flash or java or something, I don't remember) to play the video. I clicked on an area which has been marked something like www.myuniversity.blackboard.edu^. After that, I can access is no longer a URL containing the above text. I search everywhere to find a way to undo this action, and I can't find the same window parameter pop up anywhere. Help, please.

  Furthermore, when you are on the page, you can also click on plugin notification icon in the address bar (looks like a small block of Lego) to see if Firefox give permission to site to use one or more plugins.